summaryrefslogtreecommitdiffstats
path: root/drivers/net/sky2.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sky2.c')
-rw-r--r--drivers/net/sky2.c429
1 files changed, 206 insertions, 223 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 933e87f..7eeefa2 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -50,7 +50,7 @@
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.5"
+#define DRV_VERSION "1.7"
#define PFX DRV_NAME " "
/*
@@ -106,6 +106,7 @@ static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) },
@@ -117,10 +118,17 @@ static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) },
{ 0 }
};
@@ -190,7 +198,6 @@ static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
{
u16 power_control;
- u32 reg1;
int vaux;
pr_debug("sky2_set_power_state %d\n", state);
@@ -223,20 +230,9 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
else
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
- /* Turn off phy power saving */
- reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
- reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
-
- /* looks like this XL is back asswards .. */
- if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) {
- reg1 |= PCI_Y2_PHY1_COMA;
- if (hw->ports > 1)
- reg1 |= PCI_Y2_PHY2_COMA;
- }
- sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
- udelay(100);
-
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ u32 reg1;
+
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
reg1 &= P_ASPM_CONTROL_MSK;
@@ -248,15 +244,6 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
case PCI_D3hot:
case PCI_D3cold:
- /* Turn on phy power saving */
- reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
- if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
- reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
- else
- reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
- sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
- udelay(100);
-
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
else
@@ -280,7 +267,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
-static void sky2_phy_reset(struct sky2_hw *hw, unsigned port)
+static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
{
u16 reg;
@@ -302,7 +289,7 @@ static void sky2_phy_reset(struct sky2_hw *hw, unsigned port)
static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
{
struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
- u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
+ u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
if (sky2->autoneg == AUTONEG_ENABLE &&
!(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
@@ -321,7 +308,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
}
ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
- if (hw->copper) {
+ if (sky2_is_copper(hw)) {
if (hw->chip_id == CHIP_ID_YUKON_FE) {
/* enable automatic crossover */
ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
@@ -338,25 +325,37 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
}
}
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
} else {
/* workaround for deviation #4.88 (CRC errors) */
/* disable Automatic Crossover */
ctrl &= ~PHY_M_PC_MDIX_MSK;
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+ }
- if (hw->chip_id == CHIP_ID_YUKON_XL) {
- /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
- ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
- ctrl &= ~PHY_M_MAC_MD_MSK;
- ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ /* special setup for PHY 88E1112 Fiber */
+ if (hw->chip_id == CHIP_ID_YUKON_XL && !sky2_is_copper(hw)) {
+ pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+ /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ ctrl &= ~PHY_M_MAC_MD_MSK;
+ ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ if (hw->pmd_type == 'P') {
/* select page 1 to access Fiber registers */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1);
+
+ /* for SFP-module set SIGDET polarity to low */
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ ctrl |= PHY_M_FIB_SIGD_POL;
+ gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
}
+
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
}
ctrl = gm_phy_read(hw, port, PHY_MARV_CTRL);
@@ -371,9 +370,10 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ctrl = 0;
ct1000 = 0;
adv = PHY_AN_CSMA;
+ reg = 0;
if (sky2->autoneg == AUTONEG_ENABLE) {
- if (hw->copper) {
+ if (sky2_is_copper(hw)) {
if (sky2->advertising & ADVERTISED_1000baseT_Full)
ct1000 |= PHY_M_1000C_AFD;
if (sky2->advertising & ADVERTISED_1000baseT_Half)
@@ -386,8 +386,12 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
adv |= PHY_M_AN_10_FD;
if (sky2->advertising & ADVERTISED_10baseT_Half)
adv |= PHY_M_AN_10_HD;
- } else /* special defines for FIBER (88E1011S only) */
- adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD;
+ } else { /* special defines for FIBER (88E1040S only) */
+ if (sky2->advertising & ADVERTISED_1000baseT_Full)
+ adv |= PHY_M_AN_1000X_AFD;
+ if (sky2->advertising & ADVERTISED_1000baseT_Half)
+ adv |= PHY_M_AN_1000X_AHD;
+ }
/* Set Flow-control capabilities */
if (sky2->tx_pause && sky2->rx_pause)
@@ -403,21 +407,46 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
/* forced speed/duplex settings */
ct1000 = PHY_M_1000C_MSE;
- if (sky2->duplex == DUPLEX_FULL)
- ctrl |= PHY_CT_DUP_MD;
+ /* Disable auto update for duplex flow control and speed */
+ reg |= GM_GPCR_AU_ALL_DIS;
switch (sky2->speed) {
case SPEED_1000:
ctrl |= PHY_CT_SP1000;
+ reg |= GM_GPCR_SPEED_1000;
break;
case SPEED_100:
ctrl |= PHY_CT_SP100;
+ reg |= GM_GPCR_SPEED_100;
break;
}
+ if (sky2->duplex == DUPLEX_FULL) {
+ reg |= GM_GPCR_DUP_FULL;
+ ctrl |= PHY_CT_DUP_MD;
+ } else if (sky2->speed != SPEED_1000 && hw->chip_id != CHIP_ID_YUKON_EC_U) {
+ /* Turn off flow control for 10/100mbps */
+ sky2->rx_pause = 0;
+ sky2->tx_pause = 0;
+ }
+
+ if (!sky2->rx_pause)
+ reg |= GM_GPCR_FC_RX_DIS;
+
+ if (!sky2->tx_pause)
+ reg |= GM_GPCR_FC_TX_DIS;
+
+ /* Forward pause packets to GMAC? */
+ if (sky2->tx_pause || sky2->rx_pause)
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
+ else
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
+
ctrl |= PHY_CT_RESET;
}
+ gma_write16(hw, port, GM_GP_CTRL, reg);
+
if (hw->chip_id != CHIP_ID_YUKON_FE)
gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
@@ -521,6 +550,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
}
+
/* Enable phy interrupt on auto-negotiation complete (or link up) */
if (sky2->autoneg == AUTONEG_ENABLE)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
@@ -528,6 +558,29 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
}
+static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
+{
+ u32 reg1;
+ static const u32 phy_power[]
+ = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
+
+ /* looks like this XL is back asswards .. */
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+ onoff = !onoff;
+
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+
+ if (onoff)
+ /* Turn off phy power saving */
+ reg1 &= ~phy_power[port];
+ else
+ reg1 |= phy_power[port];
+
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ sky2_pci_read32(hw, PCI_DEV_REG1);
+ udelay(100);
+}
+
/* Force a renegotiation */
static void sky2_phy_reinit(struct sky2_port *sky2)
{
@@ -560,49 +613,11 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0);
}
- if (sky2->autoneg == AUTONEG_DISABLE) {
- reg = gma_read16(hw, port, GM_GP_CTRL);
- reg |= GM_GPCR_AU_ALL_DIS;
- gma_write16(hw, port, GM_GP_CTRL, reg);
- gma_read16(hw, port, GM_GP_CTRL);
-
- switch (sky2->speed) {
- case SPEED_1000:
- reg &= ~GM_GPCR_SPEED_100;
- reg |= GM_GPCR_SPEED_1000;
- break;
- case SPEED_100:
- reg &= ~GM_GPCR_SPEED_1000;
- reg |= GM_GPCR_SPEED_100;
- break;
- case SPEED_10:
- reg &= ~(GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100);
- break;
- }
-
- if (sky2->duplex == DUPLEX_FULL)
- reg |= GM_GPCR_DUP_FULL;
-
- /* turn off pause in 10/100mbps half duplex */
- else if (sky2->speed != SPEED_1000 &&
- hw->chip_id != CHIP_ID_YUKON_EC_U)
- sky2->tx_pause = sky2->rx_pause = 0;
- } else
- reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL;
-
- if (!sky2->tx_pause && !sky2->rx_pause) {
- sky2_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
- reg |=
- GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
- } else if (sky2->tx_pause && !sky2->rx_pause) {
- /* disable Rx flow-control */
- reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
- }
-
- gma_write16(hw, port, GM_GP_CTRL, reg);
-
sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC));
+ /* Enable Transmit FIFO Underrun */
+ sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
+
spin_lock_bh(&sky2->phy_lock);
sky2_phy_init(hw, port);
spin_unlock_bh(&sky2->phy_lock);
@@ -760,9 +775,10 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
/* Update chip's next pointer */
static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
{
+ q = Y2_QADDR(q, PREF_UNIT_PUT_IDX);
wmb();
- sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
- mmiowb();
+ sky2_write16(hw, q, idx);
+ sky2_read16(hw, q);
}
@@ -811,7 +827,7 @@ static void rx_set_checksum(struct sky2_port *sky2)
struct sky2_rx_le *le;
le = sky2_next_rx(sky2);
- le->addr = (ETH_HLEN << 16) | ETH_HLEN;
+ le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
le->ctrl = 0;
le->opcode = OP_TCPSTART | HW_OWNER;
@@ -949,14 +965,16 @@ static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
/*
* It appears the hardware has a bug in the FIFO logic that
* cause it to hang if the FIFO gets overrun and the receive buffer
- * is not aligned. ALso alloc_skb() won't align properly if slab
- * debugging is enabled.
+ * is not 64 byte aligned. The buffer returned from netdev_alloc_skb is
+ * aligned except if slab debugging is enabled.
*/
-static inline struct sk_buff *sky2_alloc_skb(unsigned int size, gfp_t gfp_mask)
+static inline struct sk_buff *sky2_alloc_skb(struct net_device *dev,
+ unsigned int length,
+ gfp_t gfp_mask)
{
struct sk_buff *skb;
- skb = alloc_skb(size + RX_SKB_ALIGN, gfp_mask);
+ skb = __netdev_alloc_skb(dev, length + RX_SKB_ALIGN, gfp_mask);
if (likely(skb)) {
unsigned long p = (unsigned long) skb->data;
skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p);
@@ -992,7 +1010,8 @@ static int sky2_rx_start(struct sky2_port *sky2)
for (i = 0; i < sky2->rx_pending; i++) {
struct ring_info *re = sky2->rx_ring + i;
- re->skb = sky2_alloc_skb(sky2->rx_bufsize, GFP_KERNEL);
+ re->skb = sky2_alloc_skb(sky2->netdev, sky2->rx_bufsize,
+ GFP_KERNEL);
if (!re->skb)
goto nomem;
@@ -1080,6 +1099,8 @@ static int sky2_up(struct net_device *dev)
if (!sky2->rx_ring)
goto err_out;
+ sky2_phy_power(hw, port, 1);
+
sky2_mac_init(hw, port);
/* Determine available ram buffer space (in 4K blocks).
@@ -1163,7 +1184,7 @@ static unsigned tx_le_req(const struct sk_buff *skb)
if (skb_is_gso(skb))
++count;
- if (skb->ip_summed == CHECKSUM_HW)
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
++count;
return count;
@@ -1184,7 +1205,6 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
struct sky2_tx_le *le = NULL;
struct tx_ring_info *re;
unsigned i, len;
- int avail;
dma_addr_t mapping;
u32 addr64;
u16 mss;
@@ -1225,7 +1245,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
/* Send high bits if changed or crosses boundary */
if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) {
le = get_tx_le(sky2);
- le->tx.addr = cpu_to_le32(addr64);
+ le->addr = cpu_to_le32(addr64);
le->ctrl = 0;
le->opcode = OP_ADDR64 | HW_OWNER;
sky2->tx_addr64 = high32(mapping + len);
@@ -1234,25 +1254,17 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
/* Check for TCP Segmentation Offload */
mss = skb_shinfo(skb)->gso_size;
if (mss != 0) {
- /* just drop the packet if non-linear expansion fails */
- if (skb_header_cloned(skb) &&
- pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
- dev_kfree_skb(skb);
- goto out_unlock;
- }
-
mss += ((skb->h.th->doff - 5) * 4); /* TCP options */
mss += (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr);
mss += ETH_HLEN;
- }
- if (mss != sky2->tx_last_mss) {
- le = get_tx_le(sky2);
- le->tx.tso.size = cpu_to_le16(mss);
- le->tx.tso.rsvd = 0;
- le->opcode = OP_LRGLEN | HW_OWNER;
- le->ctrl = 0;
- sky2->tx_last_mss = mss;
+ if (mss != sky2->tx_last_mss) {
+ le = get_tx_le(sky2);
+ le->addr = cpu_to_le32(mss);
+ le->opcode = OP_LRGLEN | HW_OWNER;
+ le->ctrl = 0;
+ sky2->tx_last_mss = mss;
+ }
}
ctrl = 0;
@@ -1261,7 +1273,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
if (sky2->vlgrp && vlan_tx_tag_present(skb)) {
if (!le) {
le = get_tx_le(sky2);
- le->tx.addr = 0;
+ le->addr = 0;
le->opcode = OP_VLAN|HW_OWNER;
le->ctrl = 0;
} else
@@ -1272,24 +1284,30 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
#endif
/* Handle TCP checksum offload */
- if (skb->ip_summed == CHECKSUM_HW) {
- u16 hdr = skb->h.raw - skb->data;
- u16 offset = hdr + skb->csum;
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ unsigned offset = skb->h.raw - skb->data;
+ u32 tcpsum;
+
+ tcpsum = offset << 16; /* sum start */
+ tcpsum |= offset + skb->csum; /* sum write */
ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
if (skb->nh.iph->protocol == IPPROTO_UDP)
ctrl |= UDPTCP;
- le = get_tx_le(sky2);
- le->tx.csum.start = cpu_to_le16(hdr);
- le->tx.csum.offset = cpu_to_le16(offset);
- le->length = 0; /* initial checksum value */
- le->ctrl = 1; /* one packet */
- le->opcode = OP_TCPLISW | HW_OWNER;
+ if (tcpsum != sky2->tx_tcpsum) {
+ sky2->tx_tcpsum = tcpsum;
+
+ le = get_tx_le(sky2);
+ le->addr = cpu_to_le32(tcpsum);
+ le->length = 0; /* initial checksum value */
+ le->ctrl = 1; /* one packet */
+ le->opcode = OP_TCPLISW | HW_OWNER;
+ }
}
le = get_tx_le(sky2);
- le->tx.addr = cpu_to_le32((u32) mapping);
+ le->addr = cpu_to_le32((u32) mapping);
le->length = cpu_to_le16(len);
le->ctrl = ctrl;
le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
@@ -1307,36 +1325,31 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
addr64 = high32(mapping);
if (addr64 != sky2->tx_addr64) {
le = get_tx_le(sky2);
- le->tx.addr = cpu_to_le32(addr64);
+ le->addr = cpu_to_le32(addr64);
le->ctrl = 0;
le->opcode = OP_ADDR64 | HW_OWNER;
sky2->tx_addr64 = addr64;
}
le = get_tx_le(sky2);
- le->tx.addr = cpu_to_le32((u32) mapping);
+ le->addr = cpu_to_le32((u32) mapping);
le->length = cpu_to_le16(frag->size);
le->ctrl = ctrl;
le->opcode = OP_BUFFER | HW_OWNER;
fre = sky2->tx_ring
- + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE);
+ + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE);
pci_unmap_addr_set(fre, mapaddr, mapping);
}
re->idx = sky2->tx_prod;
le->ctrl |= EOP;
- avail = tx_avail(sky2);
- if (mss != 0 || avail < TX_MIN_PENDING) {
- le->ctrl |= FRC_STAT;
- if (avail <= MAX_SKB_TX_LE)
- netif_stop_queue(dev);
- }
+ if (tx_avail(sky2) <= MAX_SKB_TX_LE)
+ netif_stop_queue(dev);
sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
-out_unlock:
spin_unlock(&sky2->tx_lock);
dev->trans_start = jiffies;
@@ -1421,7 +1434,7 @@ static int sky2_down(struct net_device *dev)
/* Stop more packets from being queued */
netif_stop_queue(dev);
- sky2_phy_reset(hw, port);
+ sky2_gmac_reset(hw, port);
/* Stop transmitter */
sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
@@ -1469,6 +1482,8 @@ static int sky2_down(struct net_device *dev)
imask &= ~portirq_msk[port];
sky2_write32(hw, B0_IMSK, imask);
+ sky2_phy_power(hw, port, 0);
+
/* turn off LED's */
sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
@@ -1497,7 +1512,7 @@ static int sky2_down(struct net_device *dev)
static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
{
- if (!hw->copper)
+ if (!sky2_is_copper(hw))
return SPEED_1000;
if (hw->chip_id == CHIP_ID_YUKON_FE)
@@ -1519,40 +1534,10 @@ static void sky2_link_up(struct sky2_port *sky2)
unsigned port = sky2->port;
u16 reg;
- /* Enable Transmit FIFO Underrun */
- sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
-
- reg = gma_read16(hw, port, GM_GP_CTRL);
- if (sky2->autoneg == AUTONEG_DISABLE) {
- reg |= GM_GPCR_AU_ALL_DIS;
-
- /* Is write/read necessary? Copied from sky2_mac_init */
- gma_write16(hw, port, GM_GP_CTRL, reg);
- gma_read16(hw, port, GM_GP_CTRL);
-
- switch (sky2->speed) {
- case SPEED_1000:
- reg &= ~GM_GPCR_SPEED_100;
- reg |= GM_GPCR_SPEED_1000;
- break;
- case SPEED_100:
- reg &= ~GM_GPCR_SPEED_1000;
- reg |= GM_GPCR_SPEED_100;
- break;
- case SPEED_10:
- reg &= ~(GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100);
- break;
- }
- } else
- reg &= ~GM_GPCR_AU_ALL_DIS;
-
- if (sky2->duplex == DUPLEX_FULL || sky2->autoneg == AUTONEG_ENABLE)
- reg |= GM_GPCR_DUP_FULL;
-
/* enable Rx/Tx */
+ reg = gma_read16(hw, port, GM_GP_CTRL);
reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
gma_write16(hw, port, GM_GP_CTRL, reg);
- gma_read16(hw, port, GM_GP_CTRL);
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
@@ -1606,7 +1591,6 @@ static void sky2_link_down(struct sky2_port *sky2)
reg = gma_read16(hw, port, GM_GP_CTRL);
reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
gma_write16(hw, port, GM_GP_CTRL, reg);
- gma_read16(hw, port, GM_GP_CTRL); /* PCI post */
if (sky2->rx_pause && !sky2->tx_pause) {
/* restore Asymmetric Pause bit */
@@ -1623,6 +1607,7 @@ static void sky2_link_down(struct sky2_port *sky2)
if (netif_msg_link(sky2))
printk(KERN_INFO PFX "%s: Link is down.\n", sky2->netdev->name);
+
sky2_phy_init(hw, port);
}
@@ -1663,8 +1648,11 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
sky2->rx_pause = (aux & PHY_M_PS_RX_P_EN) != 0;
sky2->tx_pause = (aux & PHY_M_PS_TX_P_EN) != 0;
- if ((sky2->tx_pause || sky2->rx_pause)
- && !(sky2->speed < SPEED_1000 && sky2->duplex == DUPLEX_HALF))
+ if (sky2->duplex == DUPLEX_HALF && sky2->speed != SPEED_1000
+ && hw->chip_id != CHIP_ID_YUKON_EC_U)
+ sky2->rx_pause = sky2->tx_pause = 0;
+
+ if (sky2->rx_pause || sky2->tx_pause)
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
else
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
@@ -1690,7 +1678,7 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n",
sky2->netdev->name, istatus, phystat);
- if (istatus & PHY_M_IS_AN_COMPL) {
+ if (sky2->autoneg == AUTONEG_ENABLE && (istatus & PHY_M_IS_AN_COMPL)) {
if (sky2_autoneg_done(sky2, phystat) == 0)
sky2_link_up(sky2);
goto out;
@@ -1832,15 +1820,16 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
* For small packets or errors, just reuse existing skb.
* For larger packets, get new buffer.
*/
-static struct sk_buff *sky2_receive(struct sky2_port *sky2,
+static struct sk_buff *sky2_receive(struct net_device *dev,
u16 length, u32 status)
{
+ struct sky2_port *sky2 = netdev_priv(dev);
struct ring_info *re = sky2->rx_ring + sky2->rx_next;
struct sk_buff *skb = NULL;
if (unlikely(netif_msg_rx_status(sky2)))
printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n",
- sky2->netdev->name, sky2->rx_next, status, length);
+ dev->name, sky2->rx_next, status, length);
sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
prefetch(sky2->rx_ring + sky2->rx_next);
@@ -1851,11 +1840,11 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2,
if (!(status & GMR_FS_RX_OK))
goto resubmit;
- if (length > sky2->netdev->mtu + ETH_HLEN)
+ if (length > dev->mtu + ETH_HLEN)
goto oversize;
if (length < copybreak) {
- skb = alloc_skb(length + 2, GFP_ATOMIC);
+ skb = netdev_alloc_skb(dev, length + 2);
if (!skb)
goto resubmit;
@@ -1870,7 +1859,7 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2,
} else {
struct sk_buff *nskb;
- nskb = sky2_alloc_skb(sky2->rx_bufsize, GFP_ATOMIC);
+ nskb = sky2_alloc_skb(dev, sky2->rx_bufsize, GFP_ATOMIC);
if (!nskb)
goto resubmit;
@@ -1900,7 +1889,7 @@ error:
if (netif_msg_rx_err(sky2) && net_ratelimit())
printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n",
- sky2->netdev->name, status, length);
+ dev->name, status, length);
if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE))
sky2->net_stats.rx_length_errors++;
@@ -1926,12 +1915,6 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
}
}
-/* Is status ring empty or is there more to do? */
-static inline int sky2_more_work(const struct sky2_hw *hw)
-{
- return (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX));
-}
-
/* Process status response ring */
static int sky2_status_intr(struct sky2_hw *hw, int to_do)
{
@@ -1955,16 +1938,15 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
dev = hw->dev[le->link];
sky2 = netdev_priv(dev);
- length = le->length;
- status = le->status;
+ length = le16_to_cpu(le->length);
+ status = le32_to_cpu(le->status);
switch (le->opcode & ~HW_OWNER) {
case OP_RXSTAT:
- skb = sky2_receive(sky2, length, status);
+ skb = sky2_receive(dev, length, status);
if (!skb)
break;
- skb->dev = dev;
skb->protocol = eth_type_trans(skb, dev);
dev->last_rx = jiffies;
@@ -2000,8 +1982,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
#endif
case OP_RXCHKS:
skb = sky2->rx_ring[sky2->rx_next].skb;
- skb->ip_summed = CHECKSUM_HW;
- skb->csum = le16_to_cpu(status);
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ skb->csum = status & 0xffff;
break;
case OP_TXINDEXLE:
@@ -2022,6 +2004,9 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
}
}
+ /* Fully processed status ring so clear irq */
+ sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+
exit_loop:
if (buf_write[0]) {
sky2 = netdev_priv(hw->dev[0]);
@@ -2231,19 +2216,16 @@ static int sky2_poll(struct net_device *dev0, int *budget)
sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
work_done = sky2_status_intr(hw, work_limit);
- *budget -= work_done;
- dev0->quota -= work_done;
+ if (work_done < work_limit) {
+ netif_rx_complete(dev0);
- if (status & Y2_IS_STAT_BMU)
- sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
-
- if (sky2_more_work(hw))
+ sky2_read32(hw, B0_Y2_SP_LISR);
+ return 0;
+ } else {
+ *budget -= work_done;
+ dev0->quota -= work_done;
return 1;
-
- netif_rx_complete(dev0);
-
- sky2_read32(hw, B0_Y2_SP_LISR);
- return 0;
+ }
}
static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
@@ -2303,7 +2285,7 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
static int sky2_reset(struct sky2_hw *hw)
{
u16 status;
- u8 t8, pmd_type;
+ u8 t8;
int i;
sky2_write8(hw, B0_CTST, CS_RST_CLR);
@@ -2349,9 +2331,7 @@ static int sky2_reset(struct sky2_hw *hw)
sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
- pmd_type = sky2_read8(hw, B2_PMD_TYP);
- hw->copper = !(pmd_type == 'L' || pmd_type == 'S');
-
+ hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
hw->ports = 1;
t8 = sky2_read8(hw, B2_Y2_HW_RES);
if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
@@ -2409,7 +2389,7 @@ static int sky2_reset(struct sky2_hw *hw)
sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK);
for (i = 0; i < hw->ports; i++)
- sky2_phy_reset(hw, i);
+ sky2_gmac_reset(hw, i);
memset(hw->st_le, 0, STATUS_LE_BYTES);
hw->st_idx = 0;
@@ -2448,21 +2428,22 @@ static int sky2_reset(struct sky2_hw *hw)
static u32 sky2_supported_modes(const struct sky2_hw *hw)
{
- u32 modes;
- if (hw->copper) {
- modes = SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full
- | SUPPORTED_100baseT_Half
- | SUPPORTED_100baseT_Full
- | SUPPORTED_Autoneg | SUPPORTED_TP;
+ if (sky2_is_copper(hw)) {
+ u32 modes = SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_Autoneg | SUPPORTED_TP;
if (hw->chip_id != CHIP_ID_YUKON_FE)
modes |= SUPPORTED_1000baseT_Half
- | SUPPORTED_1000baseT_Full;
+ | SUPPORTED_1000baseT_Full;
+ return modes;
} else
- modes = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE
- | SUPPORTED_Autoneg;
- return modes;
+ return SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full
+ | SUPPORTED_Autoneg
+ | SUPPORTED_FIBRE;
}
static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
@@ -2473,7 +2454,7 @@ static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
ecmd->transceiver = XCVR_INTERNAL;
ecmd->supported = sky2_supported_modes(hw);
ecmd->phy_address = PHY_ADDR_MARV;
- if (hw->copper) {
+ if (sky2_is_copper(hw)) {
ecmd->supported = SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full
| SUPPORTED_100baseT_Half
@@ -2482,12 +2463,14 @@ static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
| SUPPORTED_1000baseT_Full
| SUPPORTED_Autoneg | SUPPORTED_TP;
ecmd->port = PORT_TP;
- } else
+ ecmd->speed = sky2->speed;
+ } else {
+ ecmd->speed = SPEED_1000;
ecmd->port = PORT_FIBRE;
+ }
ecmd->advertising = sky2->advertising;
ecmd->autoneg = sky2->autoneg;
- ecmd->speed = sky2->speed;
ecmd->duplex = sky2->duplex;
return 0;
}
@@ -2886,7 +2869,6 @@ static int sky2_set_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *ecmd)
{
struct sky2_port *sky2 = netdev_priv(dev);
- int err = 0;
sky2->autoneg = ecmd->autoneg;
sky2->tx_pause = ecmd->tx_pause != 0;
@@ -2894,7 +2876,7 @@ static int sky2_set_pauseparam(struct net_device *dev,
sky2_phy_reinit(sky2);
- return err;
+ return 0;
}
static int sky2_get_coalesce(struct net_device *dev,
@@ -3051,7 +3033,7 @@ static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
regs->len - B3_RI_WTO_R1);
}
-static struct ethtool_ops sky2_ethtool_ops = {
+static const struct ethtool_ops sky2_ethtool_ops = {
.get_settings = sky2_get_settings,
.set_settings = sky2_set_settings,
.get_drvinfo = sky2_get_drvinfo,
@@ -3200,6 +3182,8 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw)
struct pci_dev *pdev = hw->pdev;
int err;
+ init_waitqueue_head (&hw->msi_wait);
+
sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
err = request_irq(pdev->irq, sky2_test_intr, IRQF_SHARED, DRV_NAME, hw);
@@ -3209,10 +3193,8 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw)
return err;
}
- init_waitqueue_head (&hw->msi_wait);
-
sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
- wmb();
+ sky2_read8(hw, B0_CTST);
wait_event_timeout(hw->msi_wait, hw->msi_detected, HZ/10);
@@ -3304,12 +3286,13 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
hw->pm_cap = pm_cap;
#ifdef __BIG_ENDIAN
- /* byte swap descriptors in hardware */
+ /* The sk98lin vendor driver uses hardware byte swapping but
+ * this driver uses software swapping.
+ */
{
u32 reg;
-
reg = sky2_pci_read32(hw, PCI_DEV_REG2);
- reg |= PCI_REV_DESC;
+ reg &= ~PCI_REV_DESC;
sky2_pci_write32(hw, PCI_DEV_REG2, reg);
}
#endif
OpenPOWER on IntegriCloud