summaryrefslogtreecommitdiffstats
path: root/drivers/net/shaper.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/shaper.c')
-rw-r--r--drivers/net/shaper.c104
1 files changed, 52 insertions, 52 deletions
diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c
index c7832e6..e886e8d 100644
--- a/drivers/net/shaper.c
+++ b/drivers/net/shaper.c
@@ -8,12 +8,12 @@
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
- *
- * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
- * warranty for any of this software. This material is provided
- * "AS-IS" and at no charge.
*
- *
+ * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ * warranty for any of this software. This material is provided
+ * "AS-IS" and at no charge.
+ *
+ *
* Algorithm:
*
* Queue Frame:
@@ -26,7 +26,7 @@
*
* SHAPER_QLEN Maximum queued frames
* SHAPER_LATENCY Bounding latency on a frame. Leaving this latency
- * window drops the frame. This stops us queueing
+ * window drops the frame. This stops us queueing
* frames for a long time and confusing a remote
* host.
* SHAPER_MAXSLIP Maximum time a priority frame may jump forward.
@@ -42,8 +42,8 @@
* run off a 100-150Hz base clock typically. This gives us a resolution at
* 200Kbit/second of about 2Kbit or 256 bytes. Above that our timer
* resolution may start to cause much more burstiness in the traffic. We
- * could avoid a lot of that by calling kick_shaper() at the end of the
- * tied device transmissions. If you run above about 100K second you
+ * could avoid a lot of that by calling kick_shaper() at the end of the
+ * tied device transmissions. If you run above about 100K second you
* may need to tune the supposed speed rate for the right values.
*
* BUGS:
@@ -68,7 +68,7 @@
* Use skb->cb for private data.
* 2000/03 Andi Kleen
*/
-
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/fcntl.h>
@@ -87,13 +87,13 @@
#include <net/dst.h>
#include <net/arp.h>
-struct shaper_cb {
+struct shaper_cb {
unsigned long shapeclock; /* Time it should go out */
unsigned long shapestamp; /* Stamp for shaper */
__u32 shapelatency; /* Latency on frame */
__u32 shapelen; /* Frame length in clocks */
__u16 shapepend; /* Pending */
-};
+};
#define SHAPERCB(skb) ((struct shaper_cb *) ((skb)->cb))
static int sh_debug; /* Debug flag */
@@ -105,7 +105,7 @@ static void shaper_kick(struct shaper *sh);
/*
* Compute clocks on a buffer
*/
-
+
static int shaper_clocks(struct shaper *shaper, struct sk_buff *skb)
{
int t=skb->len/shaper->bytespertick;
@@ -115,9 +115,9 @@ static int shaper_clocks(struct shaper *shaper, struct sk_buff *skb)
/*
* Set the speed of a shaper. We compute this in bytes per tick since
* thats how the machine wants to run. Quoted input is in bits per second
- * as is traditional (note not BAUD). We assume 8 bit bytes.
+ * as is traditional (note not BAUD). We assume 8 bit bytes.
*/
-
+
static void shaper_setspeed(struct shaper *shaper, int bitspersec)
{
shaper->bitspersec=bitspersec;
@@ -129,40 +129,40 @@ static void shaper_setspeed(struct shaper *shaper, int bitspersec)
/*
* Throw a frame at a shaper.
*/
-
+
static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct shaper *shaper = dev->priv;
struct sk_buff *ptr;
-
+
spin_lock(&shaper->lock);
ptr=shaper->sendq.prev;
-
+
/*
* Set up our packet details
*/
-
+
SHAPERCB(skb)->shapelatency=0;
SHAPERCB(skb)->shapeclock=shaper->recovery;
if(time_before(SHAPERCB(skb)->shapeclock, jiffies))
SHAPERCB(skb)->shapeclock=jiffies;
skb->priority=0; /* short term bug fix */
SHAPERCB(skb)->shapestamp=jiffies;
-
+
/*
* Time slots for this packet.
*/
-
+
SHAPERCB(skb)->shapelen= shaper_clocks(shaper,skb);
-
+
{
struct sk_buff *tmp;
/*
* Up our shape clock by the time pending on the queue
* (Should keep this in the shaper as a variable..)
*/
- for(tmp=skb_peek(&shaper->sendq); tmp!=NULL &&
+ for(tmp=skb_peek(&shaper->sendq); tmp!=NULL &&
tmp!=(struct sk_buff *)&shaper->sendq; tmp=tmp->next)
SHAPERCB(skb)->shapeclock+=SHAPERCB(tmp)->shapelen;
/*
@@ -191,7 +191,7 @@ static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
/*
* Transmit from a shaper
*/
-
+
static void shaper_queue_xmit(struct shaper *shaper, struct sk_buff *skb)
{
struct sk_buff *newskb=skb_clone(skb, GFP_ATOMIC);
@@ -218,7 +218,7 @@ static void shaper_queue_xmit(struct shaper *shaper, struct sk_buff *skb)
/*
* Timer handler for shaping clock
*/
-
+
static void shaper_timer(unsigned long data)
{
struct shaper *shaper = (struct shaper *)data;
@@ -229,25 +229,25 @@ static void shaper_timer(unsigned long data)
}
/*
- * Kick a shaper queue and try and do something sensible with the
- * queue.
+ * Kick a shaper queue and try and do something sensible with the
+ * queue.
*/
static void shaper_kick(struct shaper *shaper)
{
struct sk_buff *skb;
-
+
/*
* Walk the list (may be empty)
*/
-
+
while((skb=skb_peek(&shaper->sendq))!=NULL)
{
/*
* Each packet due to go out by now (within an error
- * of SHAPER_BURST) gets kicked onto the link
+ * of SHAPER_BURST) gets kicked onto the link
*/
-
+
if(sh_debug)
printk("Clock = %ld, jiffies = %ld\n", SHAPERCB(skb)->shapeclock, jiffies);
if(time_before_eq(SHAPERCB(skb)->shapeclock, jiffies + SHAPER_BURST))
@@ -255,16 +255,16 @@ static void shaper_kick(struct shaper *shaper)
/*
* Pull the frame and get interrupts back on.
*/
-
+
skb_unlink(skb, &shaper->sendq);
- if (shaper->recovery <
+ if (shaper->recovery <
SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen)
shaper->recovery = SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen;
/*
* Pass on to the physical target device via
* our low level packet thrower.
*/
-
+
SHAPERCB(skb)->shapepend=0;
shaper_queue_xmit(shaper, skb); /* Fire */
}
@@ -275,27 +275,27 @@ static void shaper_kick(struct shaper *shaper)
/*
* Next kick.
*/
-
+
if(skb!=NULL)
mod_timer(&shaper->timer, SHAPERCB(skb)->shapeclock);
}
/*
- * Bring the interface up. We just disallow this until a
+ * Bring the interface up. We just disallow this until a
* bind.
*/
static int shaper_open(struct net_device *dev)
{
struct shaper *shaper=dev->priv;
-
+
/*
* Can't open until attached.
* Also can't open until speed is set, or we'll get
* a division by zero.
*/
-
+
if(shaper->dev==NULL)
return -ENODEV;
if(shaper->bitspersec==0)
@@ -306,7 +306,7 @@ static int shaper_open(struct net_device *dev)
/*
* Closing a shaper flushes the queues.
*/
-
+
static int shaper_close(struct net_device *dev)
{
struct shaper *shaper=dev->priv;
@@ -335,7 +335,7 @@ static struct net_device_stats *shaper_get_stats(struct net_device *dev)
return &sh->stats;
}
-static int shaper_header(struct sk_buff *skb, struct net_device *dev,
+static int shaper_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type, void *daddr, void *saddr, unsigned len)
{
struct shaper *sh=dev->priv;
@@ -395,7 +395,7 @@ static int shaper_neigh_setup(struct neighbour *n)
n->ops = &arp_broken_ops;
n->output = n->ops->output;
}
-#endif
+#endif
return 0;
}
@@ -407,7 +407,7 @@ static int shaper_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
p->ucast_probes = 0;
p->mcast_probes = 0;
}
-#endif
+#endif
return 0;
}
@@ -432,7 +432,7 @@ static int shaper_attach(struct net_device *shdev, struct shaper *sh, struct net
}
else
shdev->hard_header = NULL;
-
+
if(dev->rebuild_header)
{
sh->rebuild_header = dev->rebuild_header;
@@ -440,7 +440,7 @@ static int shaper_attach(struct net_device *shdev, struct shaper *sh, struct net
}
else
shdev->rebuild_header = NULL;
-
+
#if 0
if(dev->hard_header_cache)
{
@@ -451,7 +451,7 @@ static int shaper_attach(struct net_device *shdev, struct shaper *sh, struct net
{
shdev->hard_header_cache= NULL;
}
-
+
if(dev->header_cache_update)
{
sh->header_cache_update = dev->header_cache_update;
@@ -464,7 +464,7 @@ static int shaper_attach(struct net_device *shdev, struct shaper *sh, struct net
shdev->hard_header_cache = NULL;
#endif
shdev->neigh_setup = shaper_neigh_setup_dev;
-
+
shdev->hard_header_len=dev->hard_header_len;
shdev->type=dev->type;
shdev->addr_len=dev->addr_len;
@@ -477,13 +477,13 @@ static int shaper_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct shaperconf *ss= (struct shaperconf *)&ifr->ifr_ifru;
struct shaper *sh=dev->priv;
-
+
if(ss->ss_cmd == SHAPER_SET_DEV || ss->ss_cmd == SHAPER_SET_SPEED)
{
if(!capable(CAP_NET_ADMIN))
return -EPERM;
}
-
+
switch(ss->ss_cmd)
{
case SHAPER_SET_DEV:
@@ -525,7 +525,7 @@ static void shaper_init_priv(struct net_device *dev)
/*
* Add a shaper device to the system
*/
-
+
static void __init shaper_setup(struct net_device *dev)
{
/*
@@ -541,11 +541,11 @@ static void __init shaper_setup(struct net_device *dev)
dev->hard_start_xmit = shaper_start_xmit;
dev->get_stats = shaper_get_stats;
dev->set_multicast_list = NULL;
-
+
/*
* Intialise the packet queues
*/
-
+
/*
* Handlers for when we attach to a device.
*/
@@ -566,7 +566,7 @@ static void __init shaper_setup(struct net_device *dev)
dev->tx_queue_len = 10;
dev->flags = 0;
}
-
+
static int shapers = 1;
#ifdef MODULE
@@ -610,7 +610,7 @@ static int __init shaper_init(void)
snprintf(name, IFNAMSIZ, "shaper%d", i);
dev = alloc_netdev(sizeof(struct shaper), name,
shaper_setup);
- if (!dev)
+ if (!dev)
break;
if (register_netdev(dev)) {
OpenPOWER on IntegriCloud