1 files changed, 434 insertions, 0 deletions

diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
new file mode 100644
index 0000000..a2e9f79
--- /dev/null
+++ b/drivers/net/sfc/tenxpress.c
@@ -0,0 +1,434 @@
+/****************************************************************************
+ * Driver for Solarflare 802.3an compliant PHY
+ * Copyright 2007 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include "efx.h"
+#include "gmii.h"
+#include "mdio_10g.h"
+#include "falcon.h"
+#include "phy.h"
+#include "falcon_hwdefs.h"
+#include "boards.h"
+#include "mac.h"
+
+/* We expect these MMDs to be in the package */
+/* AN not here as mdio_check_mmds() requires STAT2 support */
+#define TENXPRESS_REQUIRED_DEVS (MDIO_MMDREG_DEVS0_PMAPMD | \
+				 MDIO_MMDREG_DEVS0_PCS    | \
+				 MDIO_MMDREG_DEVS0_PHYXS)
+
+/* We complain if we fail to see the link partner as 10G capable this many
+ * times in a row (must be > 1 as sampling the autoneg. registers is racy)
+ */
+#define MAX_BAD_LP_TRIES	(5)
+
+/* Extended control register */
+#define	PMA_PMD_XCONTROL_REG 0xc000
+#define	PMA_PMD_LNPGA_POWERDOWN_LBN 8
+#define	PMA_PMD_LNPGA_POWERDOWN_WIDTH 1
+
+/* extended status register */
+#define PMA_PMD_XSTATUS_REG 0xc001
+#define PMA_PMD_XSTAT_FLP_LBN   (12)
+
+/* LED control register */
+#define PMA_PMD_LED_CTRL_REG	(0xc007)
+#define PMA_PMA_LED_ACTIVITY_LBN	(3)
+
+/* LED function override register */
+#define PMA_PMD_LED_OVERR_REG	(0xc009)
+/* Bit positions for different LEDs (there are more but not wired on SFE4001)*/
+#define PMA_PMD_LED_LINK_LBN	(0)
+#define PMA_PMD_LED_SPEED_LBN	(2)
+#define PMA_PMD_LED_TX_LBN	(4)
+#define PMA_PMD_LED_RX_LBN	(6)
+/* Override settings */
+#define	PMA_PMD_LED_AUTO	(0)	/* H/W control */
+#define	PMA_PMD_LED_ON		(1)
+#define	PMA_PMD_LED_OFF		(2)
+#define PMA_PMD_LED_FLASH	(3)
+/* All LEDs under hardware control */
+#define PMA_PMD_LED_FULL_AUTO	(0)
+/* Green and Amber under hardware control, Red off */
+#define PMA_PMD_LED_DEFAULT	(PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN)
+
+
+/* Self test (BIST) control register */
+#define PMA_PMD_BIST_CTRL_REG	(0xc014)
+#define PMA_PMD_BIST_BER_LBN	(2)	/* Run BER test */
+#define PMA_PMD_BIST_CONT_LBN	(1)	/* Run continuous BIST until cleared */
+#define PMA_PMD_BIST_SINGLE_LBN	(0)	/* Run 1 BIST iteration (self clears) */
+/* Self test status register */
+#define PMA_PMD_BIST_STAT_REG	(0xc015)
+#define PMA_PMD_BIST_ENX_LBN	(3)
+#define PMA_PMD_BIST_PMA_LBN	(2)
+#define PMA_PMD_BIST_RXD_LBN	(1)
+#define PMA_PMD_BIST_AFE_LBN	(0)
+
+#define BIST_MAX_DELAY	(1000)
+#define BIST_POLL_DELAY	(10)
+
+/* Misc register defines */
+#define PCS_CLOCK_CTRL_REG 0xd801
+#define PLL312_RST_N_LBN 2
+
+#define PCS_SOFT_RST2_REG 0xd806
+#define SERDES_RST_N_LBN 13
+#define XGXS_RST_N_LBN 12
+
+#define	PCS_TEST_SELECT_REG 0xd807	/* PRM 10.5.8 */
+#define	CLK312_EN_LBN 3
+
+/* Boot status register */
+#define PCS_BOOT_STATUS_REG	(0xd000)
+#define PCS_BOOT_FATAL_ERR_LBN	(0)
+#define PCS_BOOT_PROGRESS_LBN	(1)
+#define PCS_BOOT_PROGRESS_WIDTH	(2)
+#define PCS_BOOT_COMPLETE_LBN	(3)
+#define PCS_BOOT_MAX_DELAY	(100)
+#define PCS_BOOT_POLL_DELAY	(10)
+
+/* Time to wait between powering down the LNPGA and turning off the power
+ * rails */
+#define LNPGA_PDOWN_WAIT	(HZ / 5)
+
+static int crc_error_reset_threshold = 100;
+module_param(crc_error_reset_threshold, int, 0644);
+MODULE_PARM_DESC(crc_error_reset_threshold,
+		 "Max number of CRC errors before XAUI reset");
+
+struct tenxpress_phy_data {
+	enum tenxpress_state state;
+	atomic_t bad_crc_count;
+	int bad_lp_tries;
+};
+
+static int tenxpress_state_is(struct efx_nic *efx, int state)
+{
+	struct tenxpress_phy_data *phy_data = efx->phy_data;
+	return (phy_data != NULL) && (state == phy_data->state);
+}
+
+void tenxpress_set_state(struct efx_nic *efx,
+				enum tenxpress_state state)
+{
+	struct tenxpress_phy_data *phy_data = efx->phy_data;
+	if (phy_data != NULL)
+		phy_data->state = state;
+}
+
+void tenxpress_crc_err(struct efx_nic *efx)
+{
+	struct tenxpress_phy_data *phy_data = efx->phy_data;
+	if (phy_data != NULL)
+		atomic_inc(&phy_data->bad_crc_count);
+}
+
+/* Check that the C166 has booted successfully */
+static int tenxpress_phy_check(struct efx_nic *efx)
+{
+	int phy_id = efx->mii.phy_id;
+	int count = PCS_BOOT_MAX_DELAY / PCS_BOOT_POLL_DELAY;
+	int boot_stat;
+
+	/* Wait for the boot to complete (or not) */
+	while (count) {
+		boot_stat = mdio_clause45_read(efx, phy_id,
+					       MDIO_MMD_PCS,
+					       PCS_BOOT_STATUS_REG);
+		if (boot_stat & (1 << PCS_BOOT_COMPLETE_LBN))
+			break;
+		count--;
+		udelay(PCS_BOOT_POLL_DELAY);
+	}
+
+	if (!count) {
+		EFX_ERR(efx, "%s: PHY boot timed out. Last status "
+			"%x\n", __func__,
+			(boot_stat >> PCS_BOOT_PROGRESS_LBN) &
+			((1 << PCS_BOOT_PROGRESS_WIDTH) - 1));
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static void tenxpress_reset_xaui(struct efx_nic *efx);
+
+static int tenxpress_init(struct efx_nic *efx)
+{
+	int rc, reg;
+
+	/* Turn on the clock  */
+	reg = (1 << CLK312_EN_LBN);
+	mdio_clause45_write(efx, efx->mii.phy_id,
+			    MDIO_MMD_PCS, PCS_TEST_SELECT_REG, reg);
+
+	rc = tenxpress_phy_check(efx);
+	if (rc < 0)
+		return rc;
+
+	/* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
+	reg = mdio_clause45_read(efx, efx->mii.phy_id,
+				 MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG);
+	reg |= (1 << PMA_PMA_LED_ACTIVITY_LBN);
+	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+			    PMA_PMD_LED_CTRL_REG, reg);
+
+	reg = PMA_PMD_LED_DEFAULT;
+	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+			    PMA_PMD_LED_OVERR_REG, reg);
+
+	return rc;
+}
+
+static int tenxpress_phy_init(struct efx_nic *efx)
+{
+	struct tenxpress_phy_data *phy_data;
+	int rc = 0;
+
+	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+	efx->phy_data = phy_data;
+
+	tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL);
+
+	rc = mdio_clause45_wait_reset_mmds(efx,
+					   TENXPRESS_REQUIRED_DEVS);
+	if (rc < 0)
+		goto fail;
+
+	rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
+	if (rc < 0)
+		goto fail;
+
+	rc = tenxpress_init(efx);
+	if (rc < 0)
+		goto fail;
+
+	schedule_timeout_uninterruptible(HZ / 5); /* 200ms */
+
+	/* Let XGXS and SerDes out of reset and resets 10XPress */
+	falcon_reset_xaui(efx);
+
+	return 0;
+
+ fail:
+	kfree(efx->phy_data);
+	efx->phy_data = NULL;
+	return rc;
+}
+
+static void tenxpress_set_bad_lp(struct efx_nic *efx, int bad_lp)
+{
+	struct tenxpress_phy_data *pd = efx->phy_data;
+	int reg;
+
+	/* Nothing to do if all is well and was previously so. */
+	if (!(bad_lp || pd->bad_lp_tries))
+		return;
+
+	reg = mdio_clause45_read(efx, efx->mii.phy_id,
+				 MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG);
+
+	if (bad_lp)
+		pd->bad_lp_tries++;
+	else
+		pd->bad_lp_tries = 0;
+
+	if (pd->bad_lp_tries == MAX_BAD_LP_TRIES) {
+		pd->bad_lp_tries = 0;	/* Restart count */
+		reg &= ~(PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN);
+		reg |= (PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN);
+		EFX_ERR(efx, "This NIC appears to be plugged into"
+			" a port that is not 10GBASE-T capable.\n"
+			" This PHY is 10GBASE-T ONLY, so no link can"
+			" be established.\n");
+	} else {
+		reg |= (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN);
+	}
+	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+			    PMA_PMD_LED_OVERR_REG, reg);
+}
+
+/* Check link status and return a boolean OK value. If the link is NOT
+ * OK we have a quick rummage round to see if we appear to be plugged
+ * into a non-10GBT port and if so warn the user that they won't get
+ * link any time soon as we are 10GBT only, unless caller specified
+ * not to do this check (it isn't useful in loopback) */
+static int tenxpress_link_ok(struct efx_nic *efx, int check_lp)
+{
+	int ok = mdio_clause45_links_ok(efx, TENXPRESS_REQUIRED_DEVS);
+
+	if (ok) {
+		tenxpress_set_bad_lp(efx, 0);
+	} else if (check_lp) {
+		/* Are we plugged into the wrong sort of link? */
+		int bad_lp = 0;
+		int phy_id = efx->mii.phy_id;
+		int an_stat = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+						 MDIO_AN_STATUS);
+		int xphy_stat = mdio_clause45_read(efx, phy_id,
+						   MDIO_MMD_PMAPMD,
+						   PMA_PMD_XSTATUS_REG);
+		/* Are we plugged into anything that sends FLPs? If
+		 * not we can't distinguish between not being plugged
+		 * in and being plugged into a non-AN antique. The FLP
+		 * bit has the advantage of not clearing when autoneg
+		 * restarts. */
+		if (!(xphy_stat & (1 << PMA_PMD_XSTAT_FLP_LBN))) {
+			tenxpress_set_bad_lp(efx, 0);
+			return ok;
+		}
+
+		/* If it can do 10GBT it must be XNP capable */
+		bad_lp = !(an_stat & (1 << MDIO_AN_STATUS_XNP_LBN));
+		if (!bad_lp && (an_stat & (1 << MDIO_AN_STATUS_PAGE_LBN))) {
+			bad_lp = !(mdio_clause45_read(efx, phy_id,
+					MDIO_MMD_AN, MDIO_AN_10GBT_STATUS) &
+					(1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN));
+		}
+		tenxpress_set_bad_lp(efx, bad_lp);
+	}
+	return ok;
+}
+
+static void tenxpress_phy_reconfigure(struct efx_nic *efx)
+{
+	if (!tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL))
+		return;
+
+	efx->link_up = tenxpress_link_ok(efx, 0);
+	efx->link_options = GM_LPA_10000FULL;
+}
+
+static void tenxpress_phy_clear_interrupt(struct efx_nic *efx)
+{
+	/* Nothing done here - LASI interrupts aren't reliable so poll  */
+}
+
+
+/* Poll PHY for interrupt */
+static int tenxpress_phy_check_hw(struct efx_nic *efx)
+{
+	struct tenxpress_phy_data *phy_data = efx->phy_data;
+	int phy_up = tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL);
+	int link_ok;
+
+	link_ok = phy_up && tenxpress_link_ok(efx, 1);
+
+	if (link_ok != efx->link_up)
+		falcon_xmac_sim_phy_event(efx);
+
+	/* Nothing to check if we've already shut down the PHY */
+	if (!phy_up)
+		return 0;
+
+	if (atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) {
+		EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n");
+		falcon_reset_xaui(efx);
+		atomic_set(&phy_data->bad_crc_count, 0);
+	}
+
+	return 0;
+}
+
+static void tenxpress_phy_fini(struct efx_nic *efx)
+{
+	int reg;
+
+	/* Power down the LNPGA */
+	reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
+	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+			    PMA_PMD_XCONTROL_REG, reg);
+
+	/* Waiting here ensures that the board fini, which can turn off the
+	 * power to the PHY, won't get run until the LNPGA powerdown has been
+	 * given long enough to complete. */
+	schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
+
+	kfree(efx->phy_data);
+	efx->phy_data = NULL;
+}
+
+
+/* Set the RX and TX LEDs and Link LED flashing. The other LEDs
+ * (which probably aren't wired anyway) are left in AUTO mode */
+void tenxpress_phy_blink(struct efx_nic *efx, int blink)
+{
+	int reg;
+
+	if (blink)
+		reg = (PMA_PMD_LED_FLASH << PMA_PMD_LED_TX_LBN) |
+			(PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN) |
+			(PMA_PMD_LED_FLASH << PMA_PMD_LED_LINK_LBN);
+	else
+		reg = PMA_PMD_LED_DEFAULT;
+
+	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+			    PMA_PMD_LED_OVERR_REG, reg);
+}
+
+static void tenxpress_reset_xaui(struct efx_nic *efx)
+{
+	int phy = efx->mii.phy_id;
+	int clk_ctrl, test_select, soft_rst2;
+
+	/* Real work is done on clock_ctrl other resets are thought to be
+	 * optional but make the reset more reliable
+	 */
+
+	/* Read */
+	clk_ctrl = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
+				      PCS_CLOCK_CTRL_REG);
+	test_select = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
+					 PCS_TEST_SELECT_REG);
+	soft_rst2 = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
+				       PCS_SOFT_RST2_REG);
+
+	/* Put in reset */
+	test_select &= ~(1 << CLK312_EN_LBN);
+	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
+			    PCS_TEST_SELECT_REG, test_select);
+
+	soft_rst2 &= ~((1 << XGXS_RST_N_LBN) | (1 << SERDES_RST_N_LBN));
+	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
+			    PCS_SOFT_RST2_REG, soft_rst2);
+
+	clk_ctrl &= ~(1 << PLL312_RST_N_LBN);
+	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
+			    PCS_CLOCK_CTRL_REG, clk_ctrl);
+	udelay(10);
+
+	/* Remove reset */
+	clk_ctrl |= (1 << PLL312_RST_N_LBN);
+	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
+			    PCS_CLOCK_CTRL_REG, clk_ctrl);
+	udelay(10);
+
+	soft_rst2 |= ((1 << XGXS_RST_N_LBN) | (1 << SERDES_RST_N_LBN));
+	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
+			    PCS_SOFT_RST2_REG, soft_rst2);
+	udelay(10);
+
+	test_select |= (1 << CLK312_EN_LBN);
+	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
+			    PCS_TEST_SELECT_REG, test_select);
+	udelay(10);
+}
+
+struct efx_phy_operations falcon_tenxpress_phy_ops = {
+	.init             = tenxpress_phy_init,
+	.reconfigure      = tenxpress_phy_reconfigure,
+	.check_hw         = tenxpress_phy_check_hw,
+	.fini             = tenxpress_phy_fini,
+	.clear_interrupt  = tenxpress_phy_clear_interrupt,
+	.reset_xaui       = tenxpress_reset_xaui,
+	.mmds             = TENXPRESS_REQUIRED_DEVS,
+};