diff options
Diffstat (limited to 'drivers/net/sfc/qt202x_phy.c')
| -rw-r--r-- | drivers/net/sfc/qt202x_phy.c | 242 |
1 files changed, 242 insertions, 0 deletions
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c new file mode 100644 index 0000000..3800fc7 --- /dev/null +++ b/drivers/net/sfc/qt202x_phy.c @@ -0,0 +1,242 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2006-2009 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ +/* + * Driver for AMCC QT202x SFP+ and XFP adapters; see www.amcc.com for details + */ + +#include <linux/timer.h> +#include <linux/delay.h> +#include "efx.h" +#include "mdio_10g.h" +#include "phy.h" +#include "nic.h" + +#define QT202X_REQUIRED_DEVS (MDIO_DEVS_PCS | \ + MDIO_DEVS_PMAPMD | \ + MDIO_DEVS_PHYXS) + +#define QT202X_LOOPBACKS ((1 << LOOPBACK_PCS) | \ + (1 << LOOPBACK_PMAPMD) | \ + (1 << LOOPBACK_PHYXS_WS)) + +/****************************************************************************/ +/* Quake-specific MDIO registers */ +#define MDIO_QUAKE_LED0_REG (0xD006) + +/* QT2025C only */ +#define PCS_FW_HEARTBEAT_REG 0xd7ee +#define PCS_FW_HEARTB_LBN 0 +#define PCS_FW_HEARTB_WIDTH 8 +#define PCS_UC8051_STATUS_REG 0xd7fd +#define PCS_UC_STATUS_LBN 0 +#define PCS_UC_STATUS_WIDTH 8 +#define PCS_UC_STATUS_FW_SAVE 0x20 +#define PMA_PMD_FTX_CTRL2_REG 0xc309 +#define PMA_PMD_FTX_STATIC_LBN 13 +#define PMA_PMD_VEND1_REG 0xc001 +#define PMA_PMD_VEND1_LBTXD_LBN 15 +#define PCS_VEND1_REG 0xc000 +#define PCS_VEND1_LBTXD_LBN 5 + +void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode) +{ + int addr = MDIO_QUAKE_LED0_REG + led; + efx_mdio_write(p, MDIO_MMD_PMAPMD, addr, mode); +} + +struct qt202x_phy_data { + enum efx_phy_mode phy_mode; +}; + +#define QT2022C2_MAX_RESET_TIME 500 +#define QT2022C2_RESET_WAIT 10 + +static int qt2025c_wait_reset(struct efx_nic *efx) +{ + unsigned long timeout = jiffies + 10 * HZ; + int reg, old_counter = 0; + + /* Wait for firmware heartbeat to start */ + for (;;) { + int counter; + reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_FW_HEARTBEAT_REG); + if (reg < 0) + return reg; + counter = ((reg >> PCS_FW_HEARTB_LBN) & + ((1 << PCS_FW_HEARTB_WIDTH) - 1)); + if (old_counter == 0) + old_counter = counter; + else if (counter != old_counter) + break; + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + msleep(10); + } + + /* Wait for firmware status to look good */ + for (;;) { + reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG); + if (reg < 0) + return reg; + if ((reg & + ((1 << PCS_UC_STATUS_WIDTH) - 1) << PCS_UC_STATUS_LBN) >= + PCS_UC_STATUS_FW_SAVE) + break; + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + msleep(100); + } + + return 0; +} + +static int qt202x_reset_phy(struct efx_nic *efx) +{ + int rc; + + if (efx->phy_type == PHY_TYPE_QT2025C) { + /* Wait for the reset triggered by falcon_reset_hw() + * to complete */ + rc = qt2025c_wait_reset(efx); + if (rc < 0) + goto fail; + } else { + /* Reset the PHYXS MMD. This is documented as doing + * a complete soft reset. */ + rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS, + QT2022C2_MAX_RESET_TIME / + QT2022C2_RESET_WAIT, + QT2022C2_RESET_WAIT); + if (rc < 0) + goto fail; + } + + /* Wait 250ms for the PHY to complete bootup */ + msleep(250); + + /* Check that all the MMDs we expect are present and responding. We + * expect faults on some if the link is down, but not on the PHY XS */ + rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS); + if (rc < 0) + goto fail; + + falcon_board(efx)->type->init_phy(efx); + + return rc; + + fail: + EFX_ERR(efx, "PHY reset timed out\n"); + return rc; +} + +static int qt202x_phy_probe(struct efx_nic *efx) +{ + efx->mdio.mmds = QT202X_REQUIRED_DEVS; + efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; + efx->loopback_modes = QT202X_LOOPBACKS | FALCON_XMAC_LOOPBACKS; + return 0; +} + +static int qt202x_phy_init(struct efx_nic *efx) +{ + struct qt202x_phy_data *phy_data; + u32 devid; + int rc; + + rc = qt202x_reset_phy(efx); + if (rc) { + EFX_ERR(efx, "PHY init failed\n"); + return rc; + } + + phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL); + if (!phy_data) + return -ENOMEM; + efx->phy_data = phy_data; + + devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS); + EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n", + devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid), + efx_mdio_id_rev(devid)); + + phy_data->phy_mode = efx->phy_mode; + return 0; +} + +static int qt202x_link_ok(struct efx_nic *efx) +{ + return efx_mdio_links_ok(efx, QT202X_REQUIRED_DEVS); +} + +static bool qt202x_phy_poll(struct efx_nic *efx) +{ + bool was_up = efx->link_state.up; + + efx->link_state.up = qt202x_link_ok(efx); + efx->link_state.speed = 10000; + efx->link_state.fd = true; + efx->link_state.fc = efx->wanted_fc; + + return efx->link_state.up != was_up; +} + +static int qt202x_phy_reconfigure(struct efx_nic *efx) +{ + struct qt202x_phy_data *phy_data = efx->phy_data; + + if (efx->phy_type == PHY_TYPE_QT2025C) { + /* There are several different register bits which can + * disable TX (and save power) on direct-attach cables + * or optical transceivers, varying somewhat between + * firmware versions. Only 'static mode' appears to + * cover everything. */ + mdio_set_flag( + &efx->mdio, efx->mdio.prtad, MDIO_MMD_PMAPMD, + PMA_PMD_FTX_CTRL2_REG, 1 << PMA_PMD_FTX_STATIC_LBN, + efx->phy_mode & PHY_MODE_TX_DISABLED || + efx->phy_mode & PHY_MODE_LOW_POWER || + efx->loopback_mode == LOOPBACK_PCS || + efx->loopback_mode == LOOPBACK_PMAPMD); + } else { + /* Reset the PHY when moving from tx off to tx on */ + if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) && + (phy_data->phy_mode & PHY_MODE_TX_DISABLED)) + qt202x_reset_phy(efx); + + efx_mdio_transmit_disable(efx); + } + + efx_mdio_phy_reconfigure(efx); + + phy_data->phy_mode = efx->phy_mode; + + return 0; +} + +static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +{ + mdio45_ethtool_gset(&efx->mdio, ecmd); +} + +static void qt202x_phy_fini(struct efx_nic *efx) +{ + /* Free the context block */ + kfree(efx->phy_data); + efx->phy_data = NULL; +} + +struct efx_phy_operations falcon_qt202x_phy_ops = { + .probe = qt202x_phy_probe, + .init = qt202x_phy_init, + .reconfigure = qt202x_phy_reconfigure, + .poll = qt202x_phy_poll, + .fini = qt202x_phy_fini, + .get_settings = qt202x_phy_get_settings, + .set_settings = efx_mdio_set_settings, +}; |
