diff options
Diffstat (limited to 'drivers/net/sfc/mcdi_pcol.h')
| -rw-r--r-- | drivers/net/sfc/mcdi_pcol.h | 71 |
1 files changed, 55 insertions, 16 deletions
diff --git a/drivers/net/sfc/mcdi_pcol.h b/drivers/net/sfc/mcdi_pcol.h index bd59302..90359e6 100644 --- a/drivers/net/sfc/mcdi_pcol.h +++ b/drivers/net/sfc/mcdi_pcol.h @@ -863,7 +863,7 @@ * bist output. The driver should only consume the BIST output * after validating OUTLEN and PHY_CFG.PHY_TYPE. * - * If a driver can't succesfully parse the BIST output, it should + * If a driver can't successfully parse the BIST output, it should * still respect the pass/Fail in OUT.RESULT * * Locks required: PHY_LOCK if doing a PHY BIST @@ -872,7 +872,7 @@ #define MC_CMD_POLL_BIST 0x26 #define MC_CMD_POLL_BIST_IN_LEN 0 #define MC_CMD_POLL_BIST_OUT_LEN UNKNOWN -#define MC_CMD_POLL_BIST_OUT_SFT9001_LEN 40 +#define MC_CMD_POLL_BIST_OUT_SFT9001_LEN 36 #define MC_CMD_POLL_BIST_OUT_MRSFP_LEN 8 #define MC_CMD_POLL_BIST_OUT_RESULT_OFST 0 #define MC_CMD_POLL_BIST_RUNNING 1 @@ -882,15 +882,14 @@ /* Generic: */ #define MC_CMD_POLL_BIST_OUT_PRIVATE_OFST 4 /* SFT9001-specific: */ -/* (offset 4 unused?) */ -#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_A_OFST 8 -#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_B_OFST 12 -#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_C_OFST 16 -#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_D_OFST 20 -#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_A_OFST 24 -#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_B_OFST 28 -#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_C_OFST 32 -#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_D_OFST 36 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_A_OFST 4 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_B_OFST 8 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_C_OFST 12 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_D_OFST 16 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_A_OFST 20 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_B_OFST 24 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_C_OFST 28 +#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_D_OFST 32 #define MC_CMD_POLL_BIST_SFT9001_PAIR_OK 1 #define MC_CMD_POLL_BIST_SFT9001_PAIR_OPEN 2 #define MC_CMD_POLL_BIST_SFT9001_INTRA_PAIR_SHORT 3 @@ -1054,9 +1053,13 @@ /* MC_CMD_PHY_STATS: * Get generic PHY statistics * - * This call returns the statistics for a generic PHY, by direct DMA - * into host memory, in a sparse array (indexed by the enumerate). - * Each value is represented by a 32bit number. + * This call returns the statistics for a generic PHY in a sparse + * array (indexed by the enumerate). Each value is represented by + * a 32bit number. + * + * If the DMA_ADDR is 0, then no DMA is performed, and the statistics + * may be read directly out of shared memory. If DMA_ADDR != 0, then + * the statistics are dmad to that (page-aligned location) * * Locks required: None * Returns: 0, ETIME @@ -1066,7 +1069,8 @@ #define MC_CMD_PHY_STATS_IN_LEN 8 #define MC_CMD_PHY_STATS_IN_DMA_ADDR_LO_OFST 0 #define MC_CMD_PHY_STATS_IN_DMA_ADDR_HI_OFST 4 -#define MC_CMD_PHY_STATS_OUT_LEN 0 +#define MC_CMD_PHY_STATS_OUT_DMA_LEN 0 +#define MC_CMD_PHY_STATS_OUT_NO_DMA_LEN (MC_CMD_PHY_NSTATS * 4) /* Unified MAC statistics enumeration */ #define MC_CMD_MAC_GENERATION_START 0 @@ -1158,11 +1162,13 @@ #define MC_CMD_MAC_STATS_CMD_CLEAR_WIDTH 1 #define MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE_LBN 2 #define MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE_WIDTH 1 -/* Fields only relevent when PERIODIC_CHANGE is set */ +/* Remaining PERIOD* fields only relevent when PERIODIC_CHANGE is set */ #define MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE_LBN 3 #define MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE_WIDTH 1 #define MC_CMD_MAC_STATS_CMD_PERIODIC_CLEAR_LBN 4 #define MC_CMD_MAC_STATS_CMD_PERIODIC_CLEAR_WIDTH 1 +#define MC_CMD_MAC_STATS_CMD_PERIODIC_NOEVENT_LBN 5 +#define MC_CMD_MAC_STATS_CMD_PERIODIC_NOEVENT_WIDTH 1 #define MC_CMD_MAC_STATS_CMD_PERIOD_MS_LBN 16 #define MC_CMD_MAC_STATS_CMD_PERIOD_MS_WIDTH 16 #define MC_CMD_MAC_STATS_IN_DMA_LEN_OFST 12 @@ -1729,6 +1735,39 @@ #define MC_CMD_MRSFP_TWEAK_OUT_IOEXP_OUTPUTS_OFST 4 /* output bits */ #define MC_CMD_MRSFP_TWEAK_OUT_IOEXP_DIRECTION_OFST 8 /* dirs: 0=out, 1=in */ +/* MC_CMD_TEST_HACK: (debug (unsurprisingly)) + * Change bits of network port state for test purposes in ways that would never be + * useful in normal operation and so need a special command to change. */ +#define MC_CMD_TEST_HACK 0x2f +#define MC_CMD_TEST_HACK_IN_LEN 8 +#define MC_CMD_TEST_HACK_IN_TXPAD_OFST 0 +#define MC_CMD_TEST_HACK_IN_TXPAD_AUTO 0 /* Let the MC manage things */ +#define MC_CMD_TEST_HACK_IN_TXPAD_ON 1 /* Force on */ +#define MC_CMD_TEST_HACK_IN_TXPAD_OFF 2 /* Force on */ +#define MC_CMD_TEST_HACK_IN_IPG_OFST 4 /* Takes a value in bits */ +#define MC_CMD_TEST_HACK_IN_IPG_AUTO 0 /* The MC picks the value */ +#define MC_CMD_TEST_HACK_OUT_LEN 0 + +/* MC_CMD_SENSOR_SET_LIMS: (debug) (mostly) adjust the sensor limits. This + * is a warranty-voiding operation. + * + * IN: sensor identifier (one of the enumeration starting with MC_CMD_SENSOR_CONTROLLER_TEMP + * followed by 4 32-bit values: min(warning) max(warning), min(fatal), max(fatal). Which + * of these limits are meaningful and what their interpretation is is sensor-specific. + * + * OUT: nothing + * + * Returns: ENOENT if the sensor specified does not exist, EINVAL if the limits are + * out of range. + */ +#define MC_CMD_SENSOR_SET_LIMS 0x4e +#define MC_CMD_SENSOR_SET_LIMS_IN_LEN 20 +#define MC_CMD_SENSOR_SET_LIMS_IN_SENSOR_OFST 0 +#define MC_CMD_SENSOR_SET_LIMS_IN_LOW0_OFST 4 +#define MC_CMD_SENSOR_SET_LIMS_IN_HI0_OFST 8 +#define MC_CMD_SENSOR_SET_LIMS_IN_LOW1_OFST 12 +#define MC_CMD_SENSOR_SET_LIMS_IN_HI1_OFST 16 + /* Do NOT add new commands beyond 0x4f as part of 3.0 : 0x50 - 0x7f will be * used for post-3.0 extensions. If you run out of space, look for gaps or * commands that are unused in the existing range. */ |
