summaryrefslogtreecommitdiffstats
path: root/drivers/net/sfc/boards.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sfc/boards.c')
-rw-r--r--drivers/net/sfc/boards.c206
1 files changed, 156 insertions, 50 deletions
diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c
index 99e6023..6490349 100644
--- a/drivers/net/sfc/boards.c
+++ b/drivers/net/sfc/boards.c
@@ -1,6 +1,6 @@
/****************************************************************************
* Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2007 Solarflare Communications Inc.
+ * Copyright 2007-2008 Solarflare Communications Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -11,6 +11,7 @@
#include "phy.h"
#include "boards.h"
#include "efx.h"
+#include "workarounds.h"
/* Macros for unpacking the board revision */
/* The revision info is in host byte order. */
@@ -52,9 +53,128 @@ static void board_blink(struct efx_nic *efx, bool blink)
}
/*****************************************************************************
+ * Support for LM87 sensor chip used on several boards
+ */
+#define LM87_REG_ALARMS1 0x41
+#define LM87_REG_ALARMS2 0x42
+#define LM87_IN_LIMITS(nr, _min, _max) \
+ 0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min
+#define LM87_AIN_LIMITS(nr, _min, _max) \
+ 0x3B + (nr), _max, 0x1A + (nr), _min
+#define LM87_TEMP_INT_LIMITS(_min, _max) \
+ 0x39, _max, 0x3A, _min
+#define LM87_TEMP_EXT1_LIMITS(_min, _max) \
+ 0x37, _max, 0x38, _min
+
+#define LM87_ALARM_TEMP_INT 0x10
+#define LM87_ALARM_TEMP_EXT1 0x20
+
+#if defined(CONFIG_SENSORS_LM87) || defined(CONFIG_SENSORS_LM87_MODULE)
+
+static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
+ const u8 *reg_values)
+{
+ struct i2c_client *client = i2c_new_device(&efx->i2c_adap, info);
+ int rc;
+
+ if (!client)
+ return -EIO;
+
+ while (*reg_values) {
+ u8 reg = *reg_values++;
+ u8 value = *reg_values++;
+ rc = i2c_smbus_write_byte_data(client, reg, value);
+ if (rc)
+ goto err;
+ }
+
+ efx->board_info.hwmon_client = client;
+ return 0;
+
+err:
+ i2c_unregister_device(client);
+ return rc;
+}
+
+static void efx_fini_lm87(struct efx_nic *efx)
+{
+ i2c_unregister_device(efx->board_info.hwmon_client);
+}
+
+static int efx_check_lm87(struct efx_nic *efx, unsigned mask)
+{
+ struct i2c_client *client = efx->board_info.hwmon_client;
+ s32 alarms1, alarms2;
+
+ /* If link is up then do not monitor temperature */
+ if (EFX_WORKAROUND_7884(efx) && efx->link_up)
+ return 0;
+
+ alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
+ alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
+ if (alarms1 < 0)
+ return alarms1;
+ if (alarms2 < 0)
+ return alarms2;
+ alarms1 &= mask;
+ alarms2 &= mask >> 8;
+ if (alarms1 || alarms2) {
+ EFX_ERR(efx,
+ "LM87 detected a hardware failure (status %02x:%02x)"
+ "%s%s\n",
+ alarms1, alarms2,
+ (alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "",
+ (alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : "");
+ return -ERANGE;
+ }
+
+ return 0;
+}
+
+#else /* !CONFIG_SENSORS_LM87 */
+
+static inline int
+efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
+ const u8 *reg_values)
+{
+ return 0;
+}
+static inline void efx_fini_lm87(struct efx_nic *efx)
+{
+}
+static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask)
+{
+ return 0;
+}
+
+#endif /* CONFIG_SENSORS_LM87 */
+
+/*****************************************************************************
* Support for the SFE4002
*
*/
+static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */
+
+static const u8 sfe4002_lm87_regs[] = {
+ LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */
+ LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */
+ LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */
+ LM87_IN_LIMITS(3, 0xb0, 0xc9), /* 5V: 4.6-5.2V */
+ LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */
+ LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */
+ LM87_AIN_LIMITS(0, 0xa0, 0xb2), /* AIN1: 1.66V +/- 5% */
+ LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */
+ LM87_TEMP_INT_LIMITS(10, 60), /* board */
+ LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */
+ 0
+};
+
+static struct i2c_board_info sfe4002_hwmon_info = {
+ I2C_BOARD_INFO("lm87", 0x2e),
+ .platform_data = &sfe4002_lm87_channel,
+ .irq = -1,
+};
+
/****************************************************************************/
/* LED allocations. Note that on rev A0 boards the schematic and the reality
* differ: red and green are swapped. Below is the fixed (A1) layout (there
@@ -84,81 +204,67 @@ static void sfe4002_fault_led(struct efx_nic *efx, bool state)
QUAKE_LED_OFF);
}
+static int sfe4002_check_hw(struct efx_nic *efx)
+{
+ /* A0 board rev. 4002s report a temperature fault the whole time
+ * (bad sensor) so we mask it out. */
+ unsigned alarm_mask =
+ (efx->board_info.major == 0 && efx->board_info.minor == 0) ?
+ ~LM87_ALARM_TEMP_EXT1 : ~0;
+
+ return efx_check_lm87(efx, alarm_mask);
+}
+
static int sfe4002_init(struct efx_nic *efx)
{
+ int rc = efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs);
+ if (rc)
+ return rc;
+ efx->board_info.monitor = sfe4002_check_hw;
efx->board_info.init_leds = sfe4002_init_leds;
efx->board_info.set_fault_led = sfe4002_fault_led;
efx->board_info.blink = board_blink;
+ efx->board_info.fini = efx_fini_lm87;
return 0;
}
/* This will get expanded as board-specific details get moved out of the
* PHY drivers. */
struct efx_board_data {
+ enum efx_board_type type;
const char *ref_model;
const char *gen_type;
int (*init) (struct efx_nic *nic);
};
-static int dummy_init(struct efx_nic *nic)
-{
- return 0;
-}
static struct efx_board_data board_data[] = {
- [EFX_BOARD_INVALID] =
- {NULL, NULL, dummy_init},
- [EFX_BOARD_SFE4001] =
- {"SFE4001", "10GBASE-T adapter", sfe4001_init},
- [EFX_BOARD_SFE4002] =
- {"SFE4002", "XFP adapter", sfe4002_init},
+ { EFX_BOARD_SFE4001, "SFE4001", "10GBASE-T adapter", sfe4001_init },
+ { EFX_BOARD_SFE4002, "SFE4002", "XFP adapter", sfe4002_init },
+ { EFX_BOARD_SFN4111T, "SFN4111T", "100/1000/10GBASE-T adapter",
+ sfn4111t_init },
};
-int efx_set_board_info(struct efx_nic *efx, u16 revision_info)
+void efx_set_board_info(struct efx_nic *efx, u16 revision_info)
{
- int rc = 0;
- struct efx_board_data *data;
-
- if (BOARD_TYPE(revision_info) >= EFX_BOARD_MAX) {
- EFX_ERR(efx, "squashing unknown board type %d\n",
- BOARD_TYPE(revision_info));
- revision_info = 0;
- }
+ struct efx_board_data *data = NULL;
+ int i;
- if (BOARD_TYPE(revision_info) == 0) {
- efx->board_info.major = 0;
- efx->board_info.minor = 0;
- /* For early boards that don't have revision info. there is
- * only 1 board for each PHY type, so we can work it out, with
- * the exception of the PHY-less boards. */
- switch (efx->phy_type) {
- case PHY_TYPE_10XPRESS:
- efx->board_info.type = EFX_BOARD_SFE4001;
- break;
- case PHY_TYPE_XFP:
- efx->board_info.type = EFX_BOARD_SFE4002;
- break;
- default:
- efx->board_info.type = 0;
- break;
- }
- } else {
- efx->board_info.type = BOARD_TYPE(revision_info);
- efx->board_info.major = BOARD_MAJOR(revision_info);
- efx->board_info.minor = BOARD_MINOR(revision_info);
- }
+ efx->board_info.type = BOARD_TYPE(revision_info);
+ efx->board_info.major = BOARD_MAJOR(revision_info);
+ efx->board_info.minor = BOARD_MINOR(revision_info);
- data = &board_data[efx->board_info.type];
+ for (i = 0; i < ARRAY_SIZE(board_data); i++)
+ if (board_data[i].type == efx->board_info.type)
+ data = &board_data[i];
- /* Report the board model number or generic type for recognisable
- * boards. */
- if (efx->board_info.type != 0)
+ if (data) {
EFX_INFO(efx, "board is %s rev %c%d\n",
(efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
? data->ref_model : data->gen_type,
'A' + efx->board_info.major, efx->board_info.minor);
-
- efx->board_info.init = data->init;
-
- return rc;
+ efx->board_info.init = data->init;
+ } else {
+ EFX_ERR(efx, "unknown board type %d\n", efx->board_info.type);
+ }
}
OpenPOWER on IntegriCloud