diff options
Diffstat (limited to 'drivers/net/saa9730.h')
| -rw-r--r-- | drivers/net/saa9730.h | 371 |
1 files changed, 371 insertions, 0 deletions
diff --git a/drivers/net/saa9730.h b/drivers/net/saa9730.h new file mode 100644 index 0000000..9e9da6b --- /dev/null +++ b/drivers/net/saa9730.h @@ -0,0 +1,371 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * SAA9730 ethernet driver description. + * + */ +#ifndef _SAA9730_H +#define _SAA9730_H + + +/* Number of 6-byte entries in the CAM. */ +#define LAN_SAA9730_CAM_ENTRIES 10 +#define LAN_SAA9730_CAM_DWORDS ((LAN_SAA9730_CAM_ENTRIES*6)/4) + +/* TX and RX packet size: fixed to 2048 bytes, according to HW requirements. */ +#define LAN_SAA9730_PACKET_SIZE 2048 + +/* + * Number of TX buffers = number of RX buffers = 2, which is fixed according + * to HW requirements. + */ +#define LAN_SAA9730_BUFFERS 2 + +/* Number of RX packets per RX buffer. */ +#define LAN_SAA9730_RCV_Q_SIZE 15 + +/* Number of TX packets per TX buffer. */ +#define LAN_SAA9730_TXM_Q_SIZE 15 + +/* + * We get an interrupt for each LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD + * packets received. + * If however we receive less than LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD + * packets, the hardware can timeout after a certain time and still tell + * us packets have arrived. + * The timeout value in unit of 32 PCI clocks (33Mhz). + * The value 200 approximates 0.0002 seconds. + */ +#define LAN_SAA9730_RCV_Q_INT_THRESHOLD 1 +#define LAN_SAA9730_DEFAULT_TIME_OUT_CNT 10 + +#define RXSF_NDIS 0 +#define RXSF_READY 2 +#define RXSF_HWDONE 3 + +#define TXSF_EMPTY 0 +#define TXSF_READY 2 +#define TXSF_HWDONE 3 + +#define LANEND_LITTLE 0 +#define LANEND_BIG_2143 1 +#define LANEND_BIG_4321 2 + +#define LANMB_ANY 0 +#define LANMB_8 1 +#define LANMB_32 2 +#define LANMB_64 3 + +#define MACCM_AUTOMATIC 0 +#define MACCM_10MB 1 +#define MACCM_MII 2 + +/* + * PHY definitions for Basic registers of QS6612 (used on MIPS ATLAS board) + */ +#define PHY_CONTROL 0x0 +#define PHY_STATUS 0x1 +#define PHY_STATUS_LINK_UP 0x4 +#define PHY_CONTROL_RESET 0x8000 +#define PHY_CONTROL_AUTO_NEG 0x1000 +#define PHY_CONTROL_RESTART_AUTO_NEG 0x0200 +#define PHY_ADDRESS 0x0 + +/* PK_COUNT register. */ +#define PK_COUNT_TX_A_SHF 24 +#define PK_COUNT_TX_A_MSK (0xff << PK_COUNT_TX_A_SHF) +#define PK_COUNT_TX_B_SHF 16 +#define PK_COUNT_TX_B_MSK (0xff << PK_COUNT_TX_B_SHF) +#define PK_COUNT_RX_A_SHF 8 +#define PK_COUNT_RX_A_MSK (0xff << PK_COUNT_RX_A_SHF) +#define PK_COUNT_RX_B_SHF 0 +#define PK_COUNT_RX_B_MSK (0xff << PK_COUNT_RX_B_SHF) + +/* OK2USE register. */ +#define OK2USE_TX_A 0x8 +#define OK2USE_TX_B 0x4 +#define OK2USE_RX_A 0x2 +#define OK2USE_RX_B 0x1 + +/* LAN DMA CONTROL register. */ +#define DMA_CTL_BLK_INT 0x80000000 +#define DMA_CTL_MAX_XFER_SHF 18 +#define DMA_CTL_MAX_XFER_MSK (0x3 << LAN_DMA_CTL_MAX_XFER_SHF) +#define DMA_CTL_ENDIAN_SHF 16 +#define DMA_CTL_ENDIAN_MSK (0x3 << LAN_DMA_CTL_ENDIAN_SHF) +#define DMA_CTL_RX_INT_COUNT_SHF 8 +#define DMA_CTL_RX_INT_COUNT_MSK (0xff << LAN_DMA_CTL_RX_INT_COUNT_SHF) +#define DMA_CTL_EN_TX_DMA 0x00000080 +#define DMA_CTL_EN_RX_DMA 0x00000040 +#define DMA_CTL_RX_INT_BUFFUL_EN 0x00000020 +#define DMA_CTL_RX_INT_TO_EN 0x00000010 +#define DMA_CTL_RX_INT_EN 0x00000008 +#define DMA_CTL_TX_INT_EN 0x00000004 +#define DMA_CTL_MAC_TX_INT_EN 0x00000002 +#define DMA_CTL_MAC_RX_INT_EN 0x00000001 + +/* DMA STATUS register. */ +#define DMA_STATUS_BAD_ADDR_SHF 16 +#define DMA_STATUS_BAD_ADDR_MSK (0xf << DMA_STATUS_BAD_ADDR_SHF) +#define DMA_STATUS_RX_PKTS_RECEIVED_SHF 8 +#define DMA_STATUS_RX_PKTS_RECEIVED_MSK (0xff << DMA_STATUS_RX_PKTS_RECEIVED_SHF) +#define DMA_STATUS_TX_EN_SYNC 0x00000080 +#define DMA_STATUS_RX_BUF_A_FUL 0x00000040 +#define DMA_STATUS_RX_BUF_B_FUL 0x00000020 +#define DMA_STATUS_RX_TO_INT 0x00000010 +#define DMA_STATUS_RX_INT 0x00000008 +#define DMA_STATUS_TX_INT 0x00000004 +#define DMA_STATUS_MAC_TX_INT 0x00000002 +#define DMA_STATUS_MAC_RX_INT 0x00000001 + +/* DMA TEST/PANIC SWITHES register. */ +#define DMA_TEST_LOOPBACK 0x01000000 +#define DMA_TEST_SW_RESET 0x00000001 + +/* MAC CONTROL register. */ +#define MAC_CONTROL_EN_MISS_ROLL 0x00002000 +#define MAC_CONTROL_MISS_ROLL 0x00000400 +#define MAC_CONTROL_LOOP10 0x00000080 +#define MAC_CONTROL_CONN_SHF 5 +#define MAC_CONTROL_CONN_MSK (0x3 << MAC_CONTROL_CONN_SHF) +#define MAC_CONTROL_MAC_LOOP 0x00000010 +#define MAC_CONTROL_FULL_DUP 0x00000008 +#define MAC_CONTROL_RESET 0x00000004 +#define MAC_CONTROL_HALT_IMM 0x00000002 +#define MAC_CONTROL_HALT_REQ 0x00000001 + +/* CAM CONTROL register. */ +#define CAM_CONTROL_COMP_EN 0x00000010 +#define CAM_CONTROL_NEG_CAM 0x00000008 +#define CAM_CONTROL_BROAD_ACC 0x00000004 +#define CAM_CONTROL_GROUP_ACC 0x00000002 +#define CAM_CONTROL_STATION_ACC 0x00000001 + +/* TRANSMIT CONTROL register. */ +#define TX_CTL_EN_COMP 0x00004000 +#define TX_CTL_EN_TX_PAR 0x00002000 +#define TX_CTL_EN_LATE_COLL 0x00001000 +#define TX_CTL_EN_EX_COLL 0x00000800 +#define TX_CTL_EN_L_CARR 0x00000400 +#define TX_CTL_EN_EX_DEFER 0x00000200 +#define TX_CTL_EN_UNDER 0x00000100 +#define TX_CTL_MII10 0x00000080 +#define TX_CTL_SD_PAUSE 0x00000040 +#define TX_CTL_NO_EX_DEF0 0x00000020 +#define TX_CTL_F_BACK 0x00000010 +#define TX_CTL_NO_CRC 0x00000008 +#define TX_CTL_NO_PAD 0x00000004 +#define TX_CTL_TX_HALT 0x00000002 +#define TX_CTL_TX_EN 0x00000001 + +/* TRANSMIT STATUS register. */ +#define TX_STATUS_SQ_ERR 0x00010000 +#define TX_STATUS_TX_HALTED 0x00008000 +#define TX_STATUS_COMP 0x00004000 +#define TX_STATUS_TX_PAR 0x00002000 +#define TX_STATUS_LATE_COLL 0x00001000 +#define TX_STATUS_TX10_STAT 0x00000800 +#define TX_STATUS_L_CARR 0x00000400 +#define TX_STATUS_EX_DEFER 0x00000200 +#define TX_STATUS_UNDER 0x00000100 +#define TX_STATUS_IN_TX 0x00000080 +#define TX_STATUS_PAUSED 0x00000040 +#define TX_STATUS_TX_DEFERRED 0x00000020 +#define TX_STATUS_EX_COLL 0x00000010 +#define TX_STATUS_TX_COLL_SHF 0 +#define TX_STATUS_TX_COLL_MSK (0xf << TX_STATUS_TX_COLL_SHF) + +/* RECEIVE CONTROL register. */ +#define RX_CTL_EN_GOOD 0x00004000 +#define RX_CTL_EN_RX_PAR 0x00002000 +#define RX_CTL_EN_LONG_ERR 0x00000800 +#define RX_CTL_EN_OVER 0x00000400 +#define RX_CTL_EN_CRC_ERR 0x00000200 +#define RX_CTL_EN_ALIGN 0x00000100 +#define RX_CTL_IGNORE_CRC 0x00000040 +#define RX_CTL_PASS_CTL 0x00000020 +#define RX_CTL_STRIP_CRC 0x00000010 +#define RX_CTL_SHORT_EN 0x00000008 +#define RX_CTL_LONG_EN 0x00000004 +#define RX_CTL_RX_HALT 0x00000002 +#define RX_CTL_RX_EN 0x00000001 + +/* RECEIVE STATUS register. */ +#define RX_STATUS_RX_HALTED 0x00008000 +#define RX_STATUS_GOOD 0x00004000 +#define RX_STATUS_RX_PAR 0x00002000 +#define RX_STATUS_LONG_ERR 0x00000800 +#define RX_STATUS_OVERFLOW 0x00000400 +#define RX_STATUS_CRC_ERR 0x00000200 +#define RX_STATUS_ALIGN_ERR 0x00000100 +#define RX_STATUS_RX10_STAT 0x00000080 +#define RX_STATUS_INT_RX 0x00000040 +#define RX_STATUS_CTL_RECD 0x00000020 + +/* MD_CA register. */ +#define MD_CA_PRE_SUP 0x00001000 +#define MD_CA_BUSY 0x00000800 +#define MD_CA_WR 0x00000400 +#define MD_CA_PHY_SHF 5 +#define MD_CA_PHY_MSK (0x1f << MD_CA_PHY_SHF) +#define MD_CA_ADDR_SHF 0 +#define MD_CA_ADDR_MSK (0x1f << MD_CA_ADDR_SHF) + +/* Tx Status/Control. */ +#define TX_STAT_CTL_OWNER_SHF 30 +#define TX_STAT_CTL_OWNER_MSK (0x3 << TX_STAT_CTL_OWNER_SHF) +#define TX_STAT_CTL_FRAME_SHF 27 +#define TX_STAT_CTL_FRAME_MSK (0x7 << TX_STAT_CTL_FRAME_SHF) +#define TX_STAT_CTL_STATUS_SHF 11 +#define TX_STAT_CTL_STATUS_MSK (0x1ffff << TX_STAT_CTL_STATUS_SHF) +#define TX_STAT_CTL_LENGTH_SHF 0 +#define TX_STAT_CTL_LENGTH_MSK (0x7ff << TX_STAT_CTL_LENGTH_SHF) + +#define TX_STAT_CTL_ERROR_MSK ((TX_STATUS_SQ_ERR | \ + TX_STATUS_TX_HALTED | \ + TX_STATUS_TX_PAR | \ + TX_STATUS_LATE_COLL | \ + TX_STATUS_L_CARR | \ + TX_STATUS_EX_DEFER | \ + TX_STATUS_UNDER | \ + TX_STATUS_PAUSED | \ + TX_STATUS_TX_DEFERRED | \ + TX_STATUS_EX_COLL | \ + TX_STATUS_TX_COLL_MSK) \ + << TX_STAT_CTL_STATUS_SHF) +#define TX_STAT_CTL_INT_AFTER_TX 0x4 + +/* Rx Status/Control. */ +#define RX_STAT_CTL_OWNER_SHF 30 +#define RX_STAT_CTL_OWNER_MSK (0x3 << RX_STAT_CTL_OWNER_SHF) +#define RX_STAT_CTL_STATUS_SHF 11 +#define RX_STAT_CTL_STATUS_MSK (0xffff << RX_STAT_CTL_STATUS_SHF) +#define RX_STAT_CTL_LENGTH_SHF 0 +#define RX_STAT_CTL_LENGTH_MSK (0x7ff << RX_STAT_CTL_LENGTH_SHF) + + + +/* The SAA9730 (LAN) controller register map, as seen via the PCI-bus. */ +#define SAA9730_LAN_REGS_ADDR 0x20400 + +struct lan_saa9730_regmap { + volatile unsigned int TxBuffA; /* 0x20400 */ + volatile unsigned int TxBuffB; /* 0x20404 */ + volatile unsigned int RxBuffA; /* 0x20408 */ + volatile unsigned int RxBuffB; /* 0x2040c */ + volatile unsigned int PacketCount; /* 0x20410 */ + volatile unsigned int Ok2Use; /* 0x20414 */ + volatile unsigned int LanDmaCtl; /* 0x20418 */ + volatile unsigned int Timeout; /* 0x2041c */ + volatile unsigned int DmaStatus; /* 0x20420 */ + volatile unsigned int DmaTest; /* 0x20424 */ + volatile unsigned char filler20428[0x20430 - 0x20428]; + volatile unsigned int PauseCount; /* 0x20430 */ + volatile unsigned int RemotePauseCount; /* 0x20434 */ + volatile unsigned char filler20438[0x20440 - 0x20438]; + volatile unsigned int MacCtl; /* 0x20440 */ + volatile unsigned int CamCtl; /* 0x20444 */ + volatile unsigned int TxCtl; /* 0x20448 */ + volatile unsigned int TxStatus; /* 0x2044c */ + volatile unsigned int RxCtl; /* 0x20450 */ + volatile unsigned int RxStatus; /* 0x20454 */ + volatile unsigned int StationMgmtData; /* 0x20458 */ + volatile unsigned int StationMgmtCtl; /* 0x2045c */ + volatile unsigned int CamAddress; /* 0x20460 */ + volatile unsigned int CamData; /* 0x20464 */ + volatile unsigned int CamEnable; /* 0x20468 */ + volatile unsigned char filler2046c[0x20500 - 0x2046c]; + volatile unsigned int DebugPCIMasterAddr; /* 0x20500 */ + volatile unsigned int DebugLanTxStateMachine; /* 0x20504 */ + volatile unsigned int DebugLanRxStateMachine; /* 0x20508 */ + volatile unsigned int DebugLanTxFifoPointers; /* 0x2050c */ + volatile unsigned int DebugLanRxFifoPointers; /* 0x20510 */ + volatile unsigned int DebugLanCtlStateMachine; /* 0x20514 */ +}; +typedef volatile struct lan_saa9730_regmap t_lan_saa9730_regmap; + + +/* EVM interrupt control registers. */ +#define EVM_LAN_INT 0x00010000 +#define EVM_MASTER_EN 0x00000001 + +/* The SAA9730 (EVM) controller register map, as seen via the PCI-bus. */ +#define SAA9730_EVM_REGS_ADDR 0x02000 + +struct evm_saa9730_regmap { + volatile unsigned int InterruptStatus1; /* 0x2000 */ + volatile unsigned int InterruptEnable1; /* 0x2004 */ + volatile unsigned int InterruptMonitor1; /* 0x2008 */ + volatile unsigned int Counter; /* 0x200c */ + volatile unsigned int CounterThreshold; /* 0x2010 */ + volatile unsigned int CounterControl; /* 0x2014 */ + volatile unsigned int GpioControl1; /* 0x2018 */ + volatile unsigned int InterruptStatus2; /* 0x201c */ + volatile unsigned int InterruptEnable2; /* 0x2020 */ + volatile unsigned int InterruptMonitor2; /* 0x2024 */ + volatile unsigned int GpioControl2; /* 0x2028 */ + volatile unsigned int InterruptBlock1; /* 0x202c */ + volatile unsigned int InterruptBlock2; /* 0x2030 */ +}; +typedef volatile struct evm_saa9730_regmap t_evm_saa9730_regmap; + + +struct lan_saa9730_private { + /* Pointer for the SAA9730 LAN controller register set. */ + t_lan_saa9730_regmap *lan_saa9730_regs; + + /* Pointer to the SAA9730 EVM register. */ + t_evm_saa9730_regmap *evm_saa9730_regs; + + /* TRUE if the next buffer to write is RxBuffA, FALSE if RxBuffB. */ + unsigned char NextRcvToUseIsA; + /* Rcv buffer Index. */ + unsigned char NextRcvPacketIndex; + + /* Index of next packet to use in that buffer. */ + unsigned char NextTxmPacketIndex; + /* Next buffer index. */ + unsigned char NextTxmBufferIndex; + + /* Index of first pending packet ready to send. */ + unsigned char PendingTxmPacketIndex; + /* Pending buffer index. */ + unsigned char PendingTxmBufferIndex; + + unsigned char DmaRcvPackets; + unsigned char DmaTxmPackets; + + unsigned char RcvAIndex; /* index into RcvBufferSpace[] for Blk A */ + unsigned char RcvBIndex; /* index into RcvBufferSpace[] for Blk B */ + + unsigned int + TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE]; + unsigned int + RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE]; + unsigned int TxBufferFree[LAN_SAA9730_BUFFERS]; + + unsigned char PhysicalAddress[LAN_SAA9730_CAM_ENTRIES][6]; + + struct net_device_stats stats; + spinlock_t lock; +}; + +#endif /* _SAA9730_H */ |
