diff options
Diffstat (limited to 'drivers/net/s2io.c')
-rw-r--r-- | drivers/net/s2io.c | 158 |
1 files changed, 80 insertions, 78 deletions
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index e1fe3a0..4a4e38b 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -370,38 +370,50 @@ static const u64 fix_mac[] = { END_SIGN }; +MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + + /* Module Loadable parameters. */ -static unsigned int tx_fifo_num = 1; -static unsigned int tx_fifo_len[MAX_TX_FIFOS] = - {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN}; -static unsigned int rx_ring_num = 1; -static unsigned int rx_ring_sz[MAX_RX_RINGS] = - {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT}; -static unsigned int rts_frm_len[MAX_RX_RINGS] = - {[0 ...(MAX_RX_RINGS - 1)] = 0 }; -static unsigned int rx_ring_mode = 1; -static unsigned int use_continuous_tx_intrs = 1; -static unsigned int rmac_pause_time = 0x100; -static unsigned int mc_pause_threshold_q0q3 = 187; -static unsigned int mc_pause_threshold_q4q7 = 187; -static unsigned int shared_splits; -static unsigned int tmac_util_period = 5; -static unsigned int rmac_util_period = 5; -static unsigned int bimodal = 0; -static unsigned int l3l4hdr_size = 128; -#ifndef CONFIG_S2IO_NAPI -static unsigned int indicate_max_pkts; -#endif +S2IO_PARM_INT(tx_fifo_num, 1); +S2IO_PARM_INT(rx_ring_num, 1); + + +S2IO_PARM_INT(rx_ring_mode, 1); +S2IO_PARM_INT(use_continuous_tx_intrs, 1); +S2IO_PARM_INT(rmac_pause_time, 0x100); +S2IO_PARM_INT(mc_pause_threshold_q0q3, 187); +S2IO_PARM_INT(mc_pause_threshold_q4q7, 187); +S2IO_PARM_INT(shared_splits, 0); +S2IO_PARM_INT(tmac_util_period, 5); +S2IO_PARM_INT(rmac_util_period, 5); +S2IO_PARM_INT(bimodal, 0); +S2IO_PARM_INT(l3l4hdr_size, 128); /* Frequency of Rx desc syncs expressed as power of 2 */ -static unsigned int rxsync_frequency = 3; +S2IO_PARM_INT(rxsync_frequency, 3); /* Interrupt type. Values can be 0(INTA), 1(MSI), 2(MSI_X) */ -static unsigned int intr_type = 0; +S2IO_PARM_INT(intr_type, 0); /* Large receive offload feature */ -static unsigned int lro = 0; +S2IO_PARM_INT(lro, 0); /* Max pkts to be aggregated by LRO at one time. If not specified, * aggregation happens until we hit max IP pkt size(64K) */ -static unsigned int lro_max_pkts = 0xFFFF; +S2IO_PARM_INT(lro_max_pkts, 0xFFFF); +#ifndef CONFIG_S2IO_NAPI +S2IO_PARM_INT(indicate_max_pkts, 0); +#endif + +static unsigned int tx_fifo_len[MAX_TX_FIFOS] = + {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN}; +static unsigned int rx_ring_sz[MAX_RX_RINGS] = + {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT}; +static unsigned int rts_frm_len[MAX_RX_RINGS] = + {[0 ...(MAX_RX_RINGS - 1)] = 0 }; + +module_param_array(tx_fifo_len, uint, NULL, 0); +module_param_array(rx_ring_sz, uint, NULL, 0); +module_param_array(rts_frm_len, uint, NULL, 0); /* * S2IO device table. @@ -464,10 +476,9 @@ static int init_shared_mem(struct s2io_nic *nic) size += config->tx_cfg[i].fifo_len; } if (size > MAX_AVAILABLE_TXDS) { - DBG_PRINT(ERR_DBG, "%s: Requested TxDs too high, ", - __FUNCTION__); + DBG_PRINT(ERR_DBG, "s2io: Requested TxDs too high, "); DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size); - return FAILURE; + return -EINVAL; } lst_size = (sizeof(TxD_t) * config->max_txds); @@ -547,6 +558,7 @@ static int init_shared_mem(struct s2io_nic *nic) nic->ufo_in_band_v = kmalloc((sizeof(u64) * size), GFP_KERNEL); if (!nic->ufo_in_band_v) return -ENOMEM; + memset(nic->ufo_in_band_v, 0, size); /* Allocation and initialization of RXDs in Rings */ size = 0; @@ -1213,7 +1225,7 @@ static int init_nic(struct s2io_nic *nic) break; } - /* Enable Tx FIFO partition 0. */ + /* Enable all configured Tx FIFO partitions */ val64 = readq(&bar0->tx_fifo_partition_0); val64 |= (TX_FIFO_PARTITION_EN); writeq(val64, &bar0->tx_fifo_partition_0); @@ -1650,7 +1662,7 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) writeq(temp64, &bar0->general_int_mask); /* * If Hercules adapter enable GPIO otherwise - * disabled all PCIX, Flash, MDIO, IIC and GPIO + * disable all PCIX, Flash, MDIO, IIC and GPIO * interrupts for now. * TODO */ @@ -2119,7 +2131,7 @@ static struct sk_buff *s2io_txdl_getskb(fifo_info_t *fifo_data, TxD_t *txdlp, in frag->size, PCI_DMA_TODEVICE); } } - txdlp->Host_Control = 0; + memset(txdlp,0, (sizeof(TxD_t) * fifo_data->max_txds)); return(skb); } @@ -2614,23 +2626,23 @@ no_rx: } #endif +#ifdef CONFIG_NET_POLL_CONTROLLER /** - * s2io_netpoll - Rx interrupt service handler for netpoll support + * s2io_netpoll - netpoll event handler entry point * @dev : pointer to the device structure. * Description: - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. + * This function will be called by upper layer to check for events on the + * interface in situations where interrupts are disabled. It is used for + * specific in-kernel networking tasks, such as remote consoles and kernel + * debugging over the network (example netdump in RedHat). */ - -#ifdef CONFIG_NET_POLL_CONTROLLER static void s2io_netpoll(struct net_device *dev) { nic_t *nic = dev->priv; mac_info_t *mac_control; struct config_param *config; XENA_dev_config_t __iomem *bar0 = nic->bar0; - u64 val64; + u64 val64 = 0xFFFFFFFFFFFFFFFFULL; int i; disable_irq(dev->irq); @@ -2639,9 +2651,17 @@ static void s2io_netpoll(struct net_device *dev) mac_control = &nic->mac_control; config = &nic->config; - val64 = readq(&bar0->rx_traffic_int); writeq(val64, &bar0->rx_traffic_int); + writeq(val64, &bar0->tx_traffic_int); + + /* we need to free up the transmitted skbufs or else netpoll will + * run out of skbs and will fail and eventually netpoll application such + * as netdump will fail. + */ + for (i = 0; i < config->tx_fifo_num; i++) + tx_intr_handler(&mac_control->fifos[i]); + /* check for received packet and indicate up to network */ for (i = 0; i < config->rx_ring_num; i++) rx_intr_handler(&mac_control->rings[i]); @@ -3327,7 +3347,7 @@ static void s2io_reset(nic_t * sp) /* Clear certain PCI/PCI-X fields after reset */ if (sp->device_type == XFRAME_II_DEVICE) { - /* Clear parity err detect bit */ + /* Clear "detected parity error" bit */ pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000); /* Clearing PCIX Ecc status register */ @@ -4942,7 +4962,8 @@ static int write_eeprom(nic_t * sp, int off, u64 data, int cnt) } static void s2io_vpd_read(nic_t *nic) { - u8 vpd_data[256],data; + u8 *vpd_data; + u8 data; int i=0, cnt, fail = 0; int vpd_addr = 0x80; @@ -4955,6 +4976,10 @@ static void s2io_vpd_read(nic_t *nic) vpd_addr = 0x50; } + vpd_data = kmalloc(256, GFP_KERNEL); + if (!vpd_data) + return; + for (i = 0; i < 256; i +=4 ) { pci_write_config_byte(nic->pdev, (vpd_addr + 2), i); pci_read_config_byte(nic->pdev, (vpd_addr + 2), &data); @@ -4977,6 +5002,7 @@ static void s2io_vpd_read(nic_t *nic) memset(nic->product_name, 0, vpd_data[1]); memcpy(nic->product_name, &vpd_data[3], vpd_data[1]); } + kfree(vpd_data); } /** @@ -5295,7 +5321,7 @@ static int s2io_link_test(nic_t * sp, uint64_t * data) else *data = 0; - return 0; + return *data; } /** @@ -6337,7 +6363,7 @@ static int s2io_card_up(nic_t * sp) s2io_set_multicast(dev); if (sp->lro) { - /* Initialize max aggregatable pkts based on MTU */ + /* Initialize max aggregatable pkts per session based on MTU */ sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu; /* Check if we can use(if specified) user provided value */ if (lro_max_pkts < sp->lro_max_aggr_per_sess) @@ -6438,7 +6464,7 @@ static void s2io_tx_watchdog(struct net_device *dev) * @cksum : FCS checksum of the frame. * @ring_no : the ring from which this RxD was extracted. * Description: - * This function is called by the Tx interrupt serivce routine to perform + * This function is called by the Rx interrupt serivce routine to perform * some OS related operations on the SKB before passing it to the upper * layers. It mainly checks if the checksum is OK, if so adds it to the * SKBs cksum variable, increments the Rx packet count and passes the SKB @@ -6698,33 +6724,6 @@ static void s2io_init_pci(nic_t * sp) pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); } -MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - -module_param(tx_fifo_num, int, 0); -module_param(rx_ring_num, int, 0); -module_param(rx_ring_mode, int, 0); -module_param_array(tx_fifo_len, uint, NULL, 0); -module_param_array(rx_ring_sz, uint, NULL, 0); -module_param_array(rts_frm_len, uint, NULL, 0); -module_param(use_continuous_tx_intrs, int, 1); -module_param(rmac_pause_time, int, 0); -module_param(mc_pause_threshold_q0q3, int, 0); -module_param(mc_pause_threshold_q4q7, int, 0); -module_param(shared_splits, int, 0); -module_param(tmac_util_period, int, 0); -module_param(rmac_util_period, int, 0); -module_param(bimodal, bool, 0); -module_param(l3l4hdr_size, int , 0); -#ifndef CONFIG_S2IO_NAPI -module_param(indicate_max_pkts, int, 0); -#endif -module_param(rxsync_frequency, int, 0); -module_param(intr_type, int, 0); -module_param(lro, int, 0); -module_param(lro_max_pkts, int, 0); - static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type) { if ( tx_fifo_num > 8) { @@ -6832,8 +6831,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) } if (dev_intr_type != MSI_X) { if (pci_request_regions(pdev, s2io_driver_name)) { - DBG_PRINT(ERR_DBG, "Request Regions failed\n"), - pci_disable_device(pdev); + DBG_PRINT(ERR_DBG, "Request Regions failed\n"); + pci_disable_device(pdev); return -ENODEV; } } @@ -6957,7 +6956,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) /* initialize the shared memory used by the NIC and the host */ if (init_shared_mem(sp)) { DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", - __FUNCTION__); + dev->name); ret = -ENOMEM; goto mem_alloc_failed; } @@ -7094,6 +7093,9 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) dev->addr_len = ETH_ALEN; memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN); + /* reset Nic and bring it to known state */ + s2io_reset(sp); + /* * Initialize the tasklet status and link state flags * and the card state parameter @@ -7131,11 +7133,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) goto register_failed; } s2io_vpd_read(sp); - DBG_PRINT(ERR_DBG, "%s: Neterion %s",dev->name, sp->product_name); - DBG_PRINT(ERR_DBG, "(rev %d), Driver version %s\n", - get_xena_rev_id(sp->pdev), - s2io_driver_version); DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2005 Neterion Inc.\n"); + DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name, + sp->product_name, get_xena_rev_id(sp->pdev)); + DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name, + s2io_driver_version); DBG_PRINT(ERR_DBG, "%s: MAC ADDR: " "%02x:%02x:%02x:%02x:%02x:%02x\n", dev->name, sp->def_mac_addr[0].mac_addr[0], |