diff options
Diffstat (limited to 'drivers/net/qlge/qlge_mpi.c')
-rw-r--r-- | drivers/net/qlge/qlge_mpi.c | 340 |
1 files changed, 249 insertions, 91 deletions
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c index e2b2286..3c00462 100644 --- a/drivers/net/qlge/qlge_mpi.c +++ b/drivers/net/qlge/qlge_mpi.c @@ -1,5 +1,54 @@ #include "qlge.h" +int ql_unpause_mpi_risc(struct ql_adapter *qdev) +{ + u32 tmp; + + /* Un-pause the RISC */ + tmp = ql_read32(qdev, CSR); + if (!(tmp & CSR_RP)) + return -EIO; + + ql_write32(qdev, CSR, CSR_CMD_CLR_PAUSE); + return 0; +} + +int ql_pause_mpi_risc(struct ql_adapter *qdev) +{ + u32 tmp; + int count = UDELAY_COUNT; + + /* Pause the RISC */ + ql_write32(qdev, CSR, CSR_CMD_SET_PAUSE); + do { + tmp = ql_read32(qdev, CSR); + if (tmp & CSR_RP) + break; + mdelay(UDELAY_DELAY); + count--; + } while (count); + return (count == 0) ? -ETIMEDOUT : 0; +} + +int ql_hard_reset_mpi_risc(struct ql_adapter *qdev) +{ + u32 tmp; + int count = UDELAY_COUNT; + + /* Reset the RISC */ + ql_write32(qdev, CSR, CSR_CMD_SET_RST); + do { + tmp = ql_read32(qdev, CSR); + if (tmp & CSR_RR) { + ql_write32(qdev, CSR, CSR_CMD_CLR_RST); + break; + } + mdelay(UDELAY_DELAY); + count--; + } while (count); + return (count == 0) ? -ETIMEDOUT : 0; +} + int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data) { int status; @@ -45,6 +94,35 @@ int ql_soft_reset_mpi_risc(struct ql_adapter *qdev) return status; } +/* Determine if we are in charge of the firwmare. If + * we are the lower of the 2 NIC pcie functions, or if + * we are the higher function and the lower function + * is not enabled. + */ +int ql_own_firmware(struct ql_adapter *qdev) +{ + u32 temp; + + /* If we are the lower of the 2 NIC functions + * on the chip the we are responsible for + * core dump and firmware reset after an error. + */ + if (qdev->func < qdev->alt_func) + return 1; + + /* If we are the higher of the 2 NIC functions + * on the chip and the lower function is not + * enabled, then we are responsible for + * core dump and firmware reset after an error. + */ + temp = ql_read32(qdev, STS); + if (!(temp & (1 << (8 + qdev->alt_func)))) + return 1; + + return 0; + +} + static int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp) { int i, status; @@ -57,7 +135,7 @@ static int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp) ql_read_mpi_reg(qdev, qdev->mailbox_out + i, &mbcp->mbox_out[i]); if (status) { - QPRINTK(qdev, DRV, ERR, "Failed mailbox read.\n"); + netif_err(qdev, drv, qdev->ndev, "Failed mailbox read.\n"); break; } } @@ -130,7 +208,7 @@ static int ql_idc_req_aen(struct ql_adapter *qdev) int status; struct mbox_params *mbcp = &qdev->idc_mbc; - QPRINTK(qdev, DRV, ERR, "Enter!\n"); + netif_err(qdev, drv, qdev->ndev, "Enter!\n"); /* Get the status data and start up a thread to * handle the request. */ @@ -138,8 +216,8 @@ static int ql_idc_req_aen(struct ql_adapter *qdev) mbcp->out_count = 4; status = ql_get_mb_sts(qdev, mbcp); if (status) { - QPRINTK(qdev, DRV, ERR, - "Could not read MPI, resetting ASIC!\n"); + netif_err(qdev, drv, qdev->ndev, + "Could not read MPI, resetting ASIC!\n"); ql_queue_asic_error(qdev); } else { /* Begin polled mode early so @@ -162,8 +240,8 @@ static int ql_idc_cmplt_aen(struct ql_adapter *qdev) mbcp->out_count = 4; status = ql_get_mb_sts(qdev, mbcp); if (status) { - QPRINTK(qdev, DRV, ERR, - "Could not read MPI, resetting RISC!\n"); + netif_err(qdev, drv, qdev->ndev, + "Could not read MPI, resetting RISC!\n"); ql_queue_fw_error(qdev); } else /* Wake up the sleeping mpi_idc_work thread that is @@ -181,13 +259,13 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp) status = ql_get_mb_sts(qdev, mbcp); if (status) { - QPRINTK(qdev, DRV, ERR, - "%s: Could not get mailbox status.\n", __func__); + netif_err(qdev, drv, qdev->ndev, + "%s: Could not get mailbox status.\n", __func__); return; } qdev->link_status = mbcp->mbox_out[1]; - QPRINTK(qdev, DRV, ERR, "Link Up.\n"); + netif_err(qdev, drv, qdev->ndev, "Link Up.\n"); /* If we're coming back from an IDC event * then set up the CAM and frame routing. @@ -195,8 +273,8 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp) if (test_bit(QL_CAM_RT_SET, &qdev->flags)) { status = ql_cam_route_initialize(qdev); if (status) { - QPRINTK(qdev, IFUP, ERR, - "Failed to init CAM/Routing tables.\n"); + netif_err(qdev, ifup, qdev->ndev, + "Failed to init CAM/Routing tables.\n"); return; } else clear_bit(QL_CAM_RT_SET, &qdev->flags); @@ -207,7 +285,7 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp) * to our liking. */ if (!test_bit(QL_PORT_CFG, &qdev->flags)) { - QPRINTK(qdev, DRV, ERR, "Queue Port Config Worker!\n"); + netif_err(qdev, drv, qdev->ndev, "Queue Port Config Worker!\n"); set_bit(QL_PORT_CFG, &qdev->flags); /* Begin polled mode early so * we don't get another interrupt @@ -229,7 +307,7 @@ static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp) status = ql_get_mb_sts(qdev, mbcp); if (status) - QPRINTK(qdev, DRV, ERR, "Link down AEN broken!\n"); + netif_err(qdev, drv, qdev->ndev, "Link down AEN broken!\n"); ql_link_off(qdev); } @@ -242,9 +320,9 @@ static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp) status = ql_get_mb_sts(qdev, mbcp); if (status) - QPRINTK(qdev, DRV, ERR, "SFP in AEN broken!\n"); + netif_err(qdev, drv, qdev->ndev, "SFP in AEN broken!\n"); else - QPRINTK(qdev, DRV, ERR, "SFP insertion detected.\n"); + netif_err(qdev, drv, qdev->ndev, "SFP insertion detected.\n"); return status; } @@ -257,9 +335,9 @@ static int ql_sfp_out(struct ql_adapter *qdev, struct mbox_params *mbcp) status = ql_get_mb_sts(qdev, mbcp); if (status) - QPRINTK(qdev, DRV, ERR, "SFP out AEN broken!\n"); + netif_err(qdev, drv, qdev->ndev, "SFP out AEN broken!\n"); else - QPRINTK(qdev, DRV, ERR, "SFP removal detected.\n"); + netif_err(qdev, drv, qdev->ndev, "SFP removal detected.\n"); return status; } @@ -272,13 +350,13 @@ static int ql_aen_lost(struct ql_adapter *qdev, struct mbox_params *mbcp) status = ql_get_mb_sts(qdev, mbcp); if (status) - QPRINTK(qdev, DRV, ERR, "Lost AEN broken!\n"); + netif_err(qdev, drv, qdev->ndev, "Lost AEN broken!\n"); else { int i; - QPRINTK(qdev, DRV, ERR, "Lost AEN detected.\n"); + netif_err(qdev, drv, qdev->ndev, "Lost AEN detected.\n"); for (i = 0; i < mbcp->out_count; i++) - QPRINTK(qdev, DRV, ERR, "mbox_out[%d] = 0x%.08x.\n", - i, mbcp->mbox_out[i]); + netif_err(qdev, drv, qdev->ndev, "mbox_out[%d] = 0x%.08x.\n", + i, mbcp->mbox_out[i]); } @@ -293,15 +371,15 @@ static void ql_init_fw_done(struct ql_adapter *qdev, struct mbox_params *mbcp) status = ql_get_mb_sts(qdev, mbcp); if (status) { - QPRINTK(qdev, DRV, ERR, "Firmware did not initialize!\n"); + netif_err(qdev, drv, qdev->ndev, "Firmware did not initialize!\n"); } else { - QPRINTK(qdev, DRV, ERR, "Firmware Revision = 0x%.08x.\n", - mbcp->mbox_out[1]); + netif_err(qdev, drv, qdev->ndev, "Firmware Revision = 0x%.08x.\n", + mbcp->mbox_out[1]); qdev->fw_rev_id = mbcp->mbox_out[1]; status = ql_cam_route_initialize(qdev); if (status) - QPRINTK(qdev, IFUP, ERR, - "Failed to init CAM/Routing tables.\n"); + netif_err(qdev, ifup, qdev->ndev, + "Failed to init CAM/Routing tables.\n"); } } @@ -320,8 +398,8 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp) mbcp->out_count = 1; status = ql_get_mb_sts(qdev, mbcp); if (status) { - QPRINTK(qdev, DRV, ERR, - "Could not read MPI, resetting ASIC!\n"); + netif_err(qdev, drv, qdev->ndev, + "Could not read MPI, resetting ASIC!\n"); ql_queue_asic_error(qdev); goto end; } @@ -410,15 +488,14 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp) mbcp->mbox_out[0] = MB_CMD_STS_ERR; return status; } - QPRINTK(qdev, DRV, ERR, - "Firmware initialization failed.\n"); + netif_err(qdev, drv, qdev->ndev, + "Firmware initialization failed.\n"); status = -EIO; ql_queue_fw_error(qdev); break; case AEN_SYS_ERR: - QPRINTK(qdev, DRV, ERR, - "System Error.\n"); + netif_err(qdev, drv, qdev->ndev, "System Error.\n"); ql_queue_fw_error(qdev); status = -EIO; break; @@ -431,8 +508,8 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp) /* Need to support AEN 8110 */ break; default: - QPRINTK(qdev, DRV, ERR, - "Unsupported AE %.08x.\n", mbcp->mbox_out[0]); + netif_err(qdev, drv, qdev->ndev, + "Unsupported AE %.08x.\n", mbcp->mbox_out[0]); /* Clear the MPI firmware status. */ } end: @@ -505,8 +582,8 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) goto done; } while (time_before(jiffies, count)); - QPRINTK(qdev, DRV, ERR, - "Timed out waiting for mailbox complete.\n"); + netif_err(qdev, drv, qdev->ndev, + "Timed out waiting for mailbox complete.\n"); status = -ETIMEDOUT; goto end; @@ -529,6 +606,22 @@ end: return status; } +int ql_mb_sys_err(struct ql_adapter *qdev) +{ + struct mbox_params mbc; + struct mbox_params *mbcp = &mbc; + int status; + + memset(mbcp, 0, sizeof(struct mbox_params)); + + mbcp->in_count = 1; + mbcp->out_count = 0; + + mbcp->mbox_in[0] = MB_CMD_MAKE_SYS_ERR; + + status = ql_mailbox_command(qdev, mbcp); + return status; +} /* Get MPI firmware version. This will be used for * driver banner and for ethtool info. @@ -552,8 +645,8 @@ int ql_mb_about_fw(struct ql_adapter *qdev) return status; if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - QPRINTK(qdev, DRV, ERR, - "Failed about firmware command\n"); + netif_err(qdev, drv, qdev->ndev, + "Failed about firmware command\n"); status = -EIO; } @@ -584,8 +677,8 @@ int ql_mb_get_fw_state(struct ql_adapter *qdev) return status; if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - QPRINTK(qdev, DRV, ERR, - "Failed Get Firmware State.\n"); + netif_err(qdev, drv, qdev->ndev, + "Failed Get Firmware State.\n"); status = -EIO; } @@ -594,8 +687,8 @@ int ql_mb_get_fw_state(struct ql_adapter *qdev) * happen. */ if (mbcp->mbox_out[1] & 1) { - QPRINTK(qdev, DRV, ERR, - "Firmware waiting for initialization.\n"); + netif_err(qdev, drv, qdev->ndev, + "Firmware waiting for initialization.\n"); status = -EIO; } @@ -627,8 +720,7 @@ int ql_mb_idc_ack(struct ql_adapter *qdev) return status; if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - QPRINTK(qdev, DRV, ERR, - "Failed IDC ACK send.\n"); + netif_err(qdev, drv, qdev->ndev, "Failed IDC ACK send.\n"); status = -EIO; } return status; @@ -659,16 +751,72 @@ int ql_mb_set_port_cfg(struct ql_adapter *qdev) return status; if (mbcp->mbox_out[0] == MB_CMD_STS_INTRMDT) { - QPRINTK(qdev, DRV, ERR, - "Port Config sent, wait for IDC.\n"); + netif_err(qdev, drv, qdev->ndev, + "Port Config sent, wait for IDC.\n"); } else if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - QPRINTK(qdev, DRV, ERR, - "Failed Set Port Configuration.\n"); + netif_err(qdev, drv, qdev->ndev, + "Failed Set Port Configuration.\n"); status = -EIO; } return status; } +int ql_mb_dump_ram(struct ql_adapter *qdev, u64 req_dma, u32 addr, + u32 size) +{ + int status = 0; + struct mbox_params mbc; + struct mbox_params *mbcp = &mbc; + + memset(mbcp, 0, sizeof(struct mbox_params)); + + mbcp->in_count = 9; + mbcp->out_count = 1; + + mbcp->mbox_in[0] = MB_CMD_DUMP_RISC_RAM; + mbcp->mbox_in[1] = LSW(addr); + mbcp->mbox_in[2] = MSW(req_dma); + mbcp->mbox_in[3] = LSW(req_dma); + mbcp->mbox_in[4] = MSW(size); + mbcp->mbox_in[5] = LSW(size); + mbcp->mbox_in[6] = MSW(MSD(req_dma)); + mbcp->mbox_in[7] = LSW(MSD(req_dma)); + mbcp->mbox_in[8] = MSW(addr); + + + status = ql_mailbox_command(qdev, mbcp); + if (status) + return status; + + if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { + netif_err(qdev, drv, qdev->ndev, "Failed to dump risc RAM.\n"); + status = -EIO; + } + return status; +} + +/* Issue a mailbox command to dump RISC RAM. */ +int ql_dump_risc_ram_area(struct ql_adapter *qdev, void *buf, + u32 ram_addr, int word_count) +{ + int status; + char *my_buf; + dma_addr_t buf_dma; + + my_buf = pci_alloc_consistent(qdev->pdev, word_count * sizeof(u32), + &buf_dma); + if (!my_buf) + return -EIO; + + status = ql_mb_dump_ram(qdev, buf_dma, ram_addr, word_count); + if (!status) + memcpy(buf, my_buf, word_count * sizeof(u32)); + + pci_free_consistent(qdev->pdev, word_count * sizeof(u32), my_buf, + buf_dma); + return status; +} + /* Get link settings and maximum frame size settings * for the current port. * Most likely will block. @@ -691,12 +839,12 @@ int ql_mb_get_port_cfg(struct ql_adapter *qdev) return status; if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - QPRINTK(qdev, DRV, ERR, - "Failed Get Port Configuration.\n"); + netif_err(qdev, drv, qdev->ndev, + "Failed Get Port Configuration.\n"); status = -EIO; } else { - QPRINTK(qdev, DRV, DEBUG, - "Passed Get Port Configuration.\n"); + netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev, + "Passed Get Port Configuration.\n"); qdev->link_config = mbcp->mbox_out[1]; qdev->max_frame_size = mbcp->mbox_out[2]; } @@ -723,8 +871,7 @@ int ql_mb_wol_mode(struct ql_adapter *qdev, u32 wol) return status; if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - QPRINTK(qdev, DRV, ERR, - "Failed to set WOL mode.\n"); + netif_err(qdev, drv, qdev->ndev, "Failed to set WOL mode.\n"); status = -EIO; } return status; @@ -766,8 +913,7 @@ int ql_mb_wol_set_magic(struct ql_adapter *qdev, u32 enable_wol) return status; if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - QPRINTK(qdev, DRV, ERR, - "Failed to set WOL mode.\n"); + netif_err(qdev, drv, qdev->ndev, "Failed to set WOL mode.\n"); status = -EIO; } return status; @@ -793,8 +939,7 @@ static int ql_idc_wait(struct ql_adapter *qdev) wait_for_completion_timeout(&qdev->ide_completion, wait_time); if (!wait_time) { - QPRINTK(qdev, DRV, ERR, - "IDC Timeout.\n"); + netif_err(qdev, drv, qdev->ndev, "IDC Timeout.\n"); break; } /* Now examine the response from the IDC process. @@ -802,18 +947,17 @@ static int ql_idc_wait(struct ql_adapter *qdev) * more wait time. */ if (mbcp->mbox_out[0] == AEN_IDC_EXT) { - QPRINTK(qdev, DRV, ERR, - "IDC Time Extension from function.\n"); + netif_err(qdev, drv, qdev->ndev, + "IDC Time Extension from function.\n"); wait_time += (mbcp->mbox_out[1] >> 8) & 0x0000000f; } else if (mbcp->mbox_out[0] == AEN_IDC_CMPLT) { - QPRINTK(qdev, DRV, ERR, - "IDC Success.\n"); + netif_err(qdev, drv, qdev->ndev, "IDC Success.\n"); status = 0; break; } else { - QPRINTK(qdev, DRV, ERR, - "IDC: Invalid State 0x%.04x.\n", - mbcp->mbox_out[0]); + netif_err(qdev, drv, qdev->ndev, + "IDC: Invalid State 0x%.04x.\n", + mbcp->mbox_out[0]); status = -EIO; break; } @@ -842,8 +986,8 @@ int ql_mb_set_led_cfg(struct ql_adapter *qdev, u32 led_config) return status; if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - QPRINTK(qdev, DRV, ERR, - "Failed to set LED Configuration.\n"); + netif_err(qdev, drv, qdev->ndev, + "Failed to set LED Configuration.\n"); status = -EIO; } @@ -868,8 +1012,8 @@ int ql_mb_get_led_cfg(struct ql_adapter *qdev) return status; if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - QPRINTK(qdev, DRV, ERR, - "Failed to get LED Configuration.\n"); + netif_err(qdev, drv, qdev->ndev, + "Failed to get LED Configuration.\n"); status = -EIO; } else qdev->led_config = mbcp->mbox_out[1]; @@ -899,16 +1043,16 @@ int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control) return status; if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) { - QPRINTK(qdev, DRV, ERR, - "Command not supported by firmware.\n"); + netif_err(qdev, drv, qdev->ndev, + "Command not supported by firmware.\n"); status = -EINVAL; } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) { /* This indicates that the firmware is * already in the state we are trying to * change it to. */ - QPRINTK(qdev, DRV, ERR, - "Command parameters make no change.\n"); + netif_err(qdev, drv, qdev->ndev, + "Command parameters make no change.\n"); } return status; } @@ -938,12 +1082,12 @@ static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control) } if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) { - QPRINTK(qdev, DRV, ERR, - "Command not supported by firmware.\n"); + netif_err(qdev, drv, qdev->ndev, + "Command not supported by firmware.\n"); status = -EINVAL; } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) { - QPRINTK(qdev, DRV, ERR, - "Failed to get MPI traffic control.\n"); + netif_err(qdev, drv, qdev->ndev, + "Failed to get MPI traffic control.\n"); status = -EIO; } return status; @@ -999,8 +1143,8 @@ void ql_mpi_port_cfg_work(struct work_struct *work) status = ql_mb_get_port_cfg(qdev); rtnl_unlock(); if (status) { - QPRINTK(qdev, DRV, ERR, - "Bug: Failed to get port config data.\n"); + netif_err(qdev, drv, qdev->ndev, + "Bug: Failed to get port config data.\n"); goto err; } @@ -1013,8 +1157,8 @@ void ql_mpi_port_cfg_work(struct work_struct *work) qdev->max_frame_size = CFG_DEFAULT_MAX_FRAME_SIZE; status = ql_set_port_cfg(qdev); if (status) { - QPRINTK(qdev, DRV, ERR, - "Bug: Failed to set port config data.\n"); + netif_err(qdev, drv, qdev->ndev, + "Bug: Failed to set port config data.\n"); goto err; } end: @@ -1046,8 +1190,8 @@ void ql_mpi_idc_work(struct work_struct *work) switch (aen) { default: - QPRINTK(qdev, DRV, ERR, - "Bug: Unhandled IDC action.\n"); + netif_err(qdev, drv, qdev->ndev, + "Bug: Unhandled IDC action.\n"); break; case MB_CMD_PORT_RESET: case MB_CMD_STOP_FW: @@ -1062,11 +1206,11 @@ void ql_mpi_idc_work(struct work_struct *work) if (timeout) { status = ql_mb_idc_ack(qdev); if (status) - QPRINTK(qdev, DRV, ERR, - "Bug: No pending IDC!\n"); + netif_err(qdev, drv, qdev->ndev, + "Bug: No pending IDC!\n"); } else { - QPRINTK(qdev, DRV, DEBUG, - "IDC ACK not required\n"); + netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev, + "IDC ACK not required\n"); status = 0; /* success */ } break; @@ -1095,11 +1239,11 @@ void ql_mpi_idc_work(struct work_struct *work) if (timeout) { status = ql_mb_idc_ack(qdev); if (status) - QPRINTK(qdev, DRV, ERR, - "Bug: No pending IDC!\n"); + netif_err(qdev, drv, qdev->ndev, + "Bug: No pending IDC!\n"); } else { - QPRINTK(qdev, DRV, DEBUG, - "IDC ACK not required\n"); + netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev, + "IDC ACK not required\n"); status = 0; /* success */ } break; @@ -1143,5 +1287,19 @@ void ql_mpi_reset_work(struct work_struct *work) cancel_delayed_work_sync(&qdev->mpi_work); cancel_delayed_work_sync(&qdev->mpi_port_cfg_work); cancel_delayed_work_sync(&qdev->mpi_idc_work); + /* If we're not the dominant NIC function, + * then there is nothing to do. + */ + if (!ql_own_firmware(qdev)) { + netif_err(qdev, drv, qdev->ndev, "Don't own firmware!\n"); + return; + } + + if (!ql_core_dump(qdev, qdev->mpi_coredump)) { + netif_err(qdev, drv, qdev->ndev, "Core is dumped!\n"); + qdev->core_is_dumped = 1; + queue_delayed_work(qdev->workqueue, + &qdev->mpi_core_to_log, 5 * HZ); + } ql_soft_reset_mpi_risc(qdev); } |