summaryrefslogtreecommitdiffstats
path: root/drivers/net/qlge/qlge_mpi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/qlge/qlge_mpi.c')
-rw-r--r--drivers/net/qlge/qlge_mpi.c210
1 files changed, 180 insertions, 30 deletions
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index aec05f2..e2b2286 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -1,25 +1,5 @@
#include "qlge.h"
-static void ql_display_mb_sts(struct ql_adapter *qdev,
- struct mbox_params *mbcp)
-{
- int i;
- static char *err_sts[] = {
- "Command Complete",
- "Command Not Supported",
- "Host Interface Error",
- "Checksum Error",
- "Unused Completion Status",
- "Test Failed",
- "Command Parameter Error"};
-
- QPRINTK(qdev, DRV, DEBUG, "%s.\n",
- err_sts[mbcp->mbox_out[0] & 0x0000000f]);
- for (i = 0; i < mbcp->out_count; i++)
- QPRINTK(qdev, DRV, DEBUG, "mbox_out[%d] = 0x%.08x.\n",
- i, mbcp->mbox_out[i]);
-}
-
int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data)
{
int status;
@@ -317,6 +297,7 @@ static void ql_init_fw_done(struct ql_adapter *qdev, struct mbox_params *mbcp)
} else {
QPRINTK(qdev, DRV, ERR, "Firmware Revision = 0x%.08x.\n",
mbcp->mbox_out[1]);
+ qdev->fw_rev_id = mbcp->mbox_out[1];
status = ql_cam_route_initialize(qdev);
if (status)
QPRINTK(qdev, IFUP, ERR,
@@ -446,6 +427,9 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
ql_aen_lost(qdev, mbcp);
break;
+ case AEN_DCBX_CHG:
+ /* Need to support AEN 8110 */
+ break;
default:
QPRINTK(qdev, DRV, ERR,
"Unsupported AE %.08x.\n", mbcp->mbox_out[0]);
@@ -537,7 +521,6 @@ done:
MB_CMD_STS_GOOD) &&
((mbcp->mbox_out[0] & 0x0000f000) !=
MB_CMD_STS_INTRMDT)) {
- ql_display_mb_sts(qdev, mbcp);
status = -EIO;
}
end:
@@ -655,7 +638,7 @@ int ql_mb_idc_ack(struct ql_adapter *qdev)
* for the current port.
* Most likely will block.
*/
-static int ql_mb_set_port_cfg(struct ql_adapter *qdev)
+int ql_mb_set_port_cfg(struct ql_adapter *qdev)
{
struct mbox_params mbc;
struct mbox_params *mbcp = &mbc;
@@ -690,7 +673,7 @@ static int ql_mb_set_port_cfg(struct ql_adapter *qdev)
* for the current port.
* Most likely will block.
*/
-static int ql_mb_get_port_cfg(struct ql_adapter *qdev)
+int ql_mb_get_port_cfg(struct ql_adapter *qdev)
{
struct mbox_params mbc;
struct mbox_params *mbcp = &mbc;
@@ -720,6 +703,76 @@ static int ql_mb_get_port_cfg(struct ql_adapter *qdev)
return status;
}
+int ql_mb_wol_mode(struct ql_adapter *qdev, u32 wol)
+{
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+ int status;
+
+ memset(mbcp, 0, sizeof(struct mbox_params));
+
+ mbcp->in_count = 2;
+ mbcp->out_count = 1;
+
+ mbcp->mbox_in[0] = MB_CMD_SET_WOL_MODE;
+ mbcp->mbox_in[1] = wol;
+
+
+ status = ql_mailbox_command(qdev, mbcp);
+ if (status)
+ return status;
+
+ if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+ QPRINTK(qdev, DRV, ERR,
+ "Failed to set WOL mode.\n");
+ status = -EIO;
+ }
+ return status;
+}
+
+int ql_mb_wol_set_magic(struct ql_adapter *qdev, u32 enable_wol)
+{
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+ int status;
+ u8 *addr = qdev->ndev->dev_addr;
+
+ memset(mbcp, 0, sizeof(struct mbox_params));
+
+ mbcp->in_count = 8;
+ mbcp->out_count = 1;
+
+ mbcp->mbox_in[0] = MB_CMD_SET_WOL_MAGIC;
+ if (enable_wol) {
+ mbcp->mbox_in[1] = (u32)addr[0];
+ mbcp->mbox_in[2] = (u32)addr[1];
+ mbcp->mbox_in[3] = (u32)addr[2];
+ mbcp->mbox_in[4] = (u32)addr[3];
+ mbcp->mbox_in[5] = (u32)addr[4];
+ mbcp->mbox_in[6] = (u32)addr[5];
+ mbcp->mbox_in[7] = 0;
+ } else {
+ mbcp->mbox_in[1] = 0;
+ mbcp->mbox_in[2] = 1;
+ mbcp->mbox_in[3] = 1;
+ mbcp->mbox_in[4] = 1;
+ mbcp->mbox_in[5] = 1;
+ mbcp->mbox_in[6] = 1;
+ mbcp->mbox_in[7] = 0;
+ }
+
+ status = ql_mailbox_command(qdev, mbcp);
+ if (status)
+ return status;
+
+ if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+ QPRINTK(qdev, DRV, ERR,
+ "Failed to set WOL mode.\n");
+ status = -EIO;
+ }
+ return status;
+}
+
/* IDC - Inter Device Communication...
* Some firmware commands require consent of adjacent FCOE
* function. This function waits for the OK, or a
@@ -769,6 +822,61 @@ static int ql_idc_wait(struct ql_adapter *qdev)
return status;
}
+int ql_mb_set_led_cfg(struct ql_adapter *qdev, u32 led_config)
+{
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+ int status;
+
+ memset(mbcp, 0, sizeof(struct mbox_params));
+
+ mbcp->in_count = 2;
+ mbcp->out_count = 1;
+
+ mbcp->mbox_in[0] = MB_CMD_SET_LED_CFG;
+ mbcp->mbox_in[1] = led_config;
+
+
+ status = ql_mailbox_command(qdev, mbcp);
+ if (status)
+ return status;
+
+ if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+ QPRINTK(qdev, DRV, ERR,
+ "Failed to set LED Configuration.\n");
+ status = -EIO;
+ }
+
+ return status;
+}
+
+int ql_mb_get_led_cfg(struct ql_adapter *qdev)
+{
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+ int status;
+
+ memset(mbcp, 0, sizeof(struct mbox_params));
+
+ mbcp->in_count = 1;
+ mbcp->out_count = 2;
+
+ mbcp->mbox_in[0] = MB_CMD_GET_LED_CFG;
+
+ status = ql_mailbox_command(qdev, mbcp);
+ if (status)
+ return status;
+
+ if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+ QPRINTK(qdev, DRV, ERR,
+ "Failed to get LED Configuration.\n");
+ status = -EIO;
+ } else
+ qdev->led_config = mbcp->mbox_out[1];
+
+ return status;
+}
+
int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control)
{
struct mbox_params mbc;
@@ -930,8 +1038,11 @@ void ql_mpi_idc_work(struct work_struct *work)
int status;
struct mbox_params *mbcp = &qdev->idc_mbc;
u32 aen;
+ int timeout;
+ rtnl_lock();
aen = mbcp->mbox_out[1] >> 16;
+ timeout = (mbcp->mbox_out[1] >> 8) & 0xf;
switch (aen) {
default:
@@ -939,22 +1050,61 @@ void ql_mpi_idc_work(struct work_struct *work)
"Bug: Unhandled IDC action.\n");
break;
case MB_CMD_PORT_RESET:
- case MB_CMD_SET_PORT_CFG:
case MB_CMD_STOP_FW:
ql_link_off(qdev);
+ case MB_CMD_SET_PORT_CFG:
/* Signal the resulting link up AEN
* that the frame routing and mac addr
* needs to be set.
* */
set_bit(QL_CAM_RT_SET, &qdev->flags);
- rtnl_lock();
- status = ql_mb_idc_ack(qdev);
- rtnl_unlock();
- if (status) {
- QPRINTK(qdev, DRV, ERR,
- "Bug: No pending IDC!\n");
+ /* Do ACK if required */
+ if (timeout) {
+ status = ql_mb_idc_ack(qdev);
+ if (status)
+ QPRINTK(qdev, DRV, ERR,
+ "Bug: No pending IDC!\n");
+ } else {
+ QPRINTK(qdev, DRV, DEBUG,
+ "IDC ACK not required\n");
+ status = 0; /* success */
}
+ break;
+
+ /* These sub-commands issued by another (FCoE)
+ * function are requesting to do an operation
+ * on the shared resource (MPI environment).
+ * We currently don't issue these so we just
+ * ACK the request.
+ */
+ case MB_CMD_IOP_RESTART_MPI:
+ case MB_CMD_IOP_PREP_LINK_DOWN:
+ /* Drop the link, reload the routing
+ * table when link comes up.
+ */
+ ql_link_off(qdev);
+ set_bit(QL_CAM_RT_SET, &qdev->flags);
+ /* Fall through. */
+ case MB_CMD_IOP_DVR_START:
+ case MB_CMD_IOP_FLASH_ACC:
+ case MB_CMD_IOP_CORE_DUMP_MPI:
+ case MB_CMD_IOP_PREP_UPDATE_MPI:
+ case MB_CMD_IOP_COMP_UPDATE_MPI:
+ case MB_CMD_IOP_NONE: /* an IDC without params */
+ /* Do ACK if required */
+ if (timeout) {
+ status = ql_mb_idc_ack(qdev);
+ if (status)
+ QPRINTK(qdev, DRV, ERR,
+ "Bug: No pending IDC!\n");
+ } else {
+ QPRINTK(qdev, DRV, DEBUG,
+ "IDC ACK not required\n");
+ status = 0; /* success */
+ }
+ break;
}
+ rtnl_unlock();
}
void ql_mpi_work(struct work_struct *work)
OpenPOWER on IntegriCloud