diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/phy/icplus.c | 59 | ||||
| -rw-r--r-- | drivers/net/phy/marvell.c | 182 |
3 files changed, 215 insertions, 28 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index cb3d13e..35fda5a 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -64,7 +64,7 @@ config BCM63XX_PHY config ICPLUS_PHY tristate "Drivers for ICPlus PHYs" ---help--- - Currently supports the IP175C PHY. + Currently supports the IP175C and IP1001 PHYs. config REALTEK_PHY tristate "Drivers for Realtek PHYs" diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index c1d2d25..9a09e24 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -30,7 +30,7 @@ #include <asm/irq.h> #include <asm/uaccess.h> -MODULE_DESCRIPTION("ICPlus IP175C PHY driver"); +MODULE_DESCRIPTION("ICPlus IP175C/IC1001 PHY drivers"); MODULE_AUTHOR("Michael Barkowski"); MODULE_LICENSE("GPL"); @@ -89,6 +89,33 @@ static int ip175c_config_init(struct phy_device *phydev) return 0; } +static int ip1001_config_init(struct phy_device *phydev) +{ + int err, value; + + /* Software Reset PHY */ + value = phy_read(phydev, MII_BMCR); + value |= BMCR_RESET; + err = phy_write(phydev, MII_BMCR, value); + if (err < 0) + return err; + + do { + value = phy_read(phydev, MII_BMCR); + } while (value & BMCR_RESET); + + /* Additional delay (2ns) used to adjust RX clock phase + * at GMII/ RGMII interface */ + value = phy_read(phydev, 16); + value |= 0x3; + + err = phy_write(phydev, 16, value); + if (err < 0) + return err; + + return err; +} + static int ip175c_read_status(struct phy_device *phydev) { if (phydev->addr == 4) /* WAN port */ @@ -121,21 +148,43 @@ static struct phy_driver ip175c_driver = { .driver = { .owner = THIS_MODULE,}, }; -static int __init ip175c_init(void) +static struct phy_driver ip1001_driver = { + .phy_id = 0x02430d90, + .name = "ICPlus IP1001", + .phy_id_mask = 0x0ffffff0, + .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | + SUPPORTED_Asym_Pause, + .config_init = &ip1001_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init icplus_init(void) { + int ret = 0; + + ret = phy_driver_register(&ip1001_driver); + if (ret < 0) + return -ENODEV; + return phy_driver_register(&ip175c_driver); } -static void __exit ip175c_exit(void) +static void __exit icplus_exit(void) { + phy_driver_unregister(&ip1001_driver); phy_driver_unregister(&ip175c_driver); } -module_init(ip175c_init); -module_exit(ip175c_exit); +module_init(icplus_init); +module_exit(icplus_exit); static struct mdio_device_id __maybe_unused icplus_tbl[] = { { 0x02430d80, 0x0ffffff0 }, + { 0x02430d90, 0x0ffffff0 }, { } }; diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index e2afdce..e8b9c53 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -30,11 +30,14 @@ #include <linux/ethtool.h> #include <linux/phy.h> #include <linux/marvell_phy.h> +#include <linux/of.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> +#define MII_MARVELL_PHY_PAGE 22 + #define MII_M1011_IEVENT 0x13 #define MII_M1011_IEVENT_CLEAR 0x0000 @@ -74,13 +77,12 @@ #define MII_88E1121_PHY_MSCR_TX_DELAY BIT(4) #define MII_88E1121_PHY_MSCR_DELAY_MASK (~(0x3 << 4)) -#define MII_88EC048_PHY_MSCR1_REG 16 -#define MII_88EC048_PHY_MSCR1_PAD_ODD BIT(6) +#define MII_88E1318S_PHY_MSCR1_REG 16 +#define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6) #define MII_88E1121_PHY_LED_CTRL 16 #define MII_88E1121_PHY_LED_PAGE 3 #define MII_88E1121_PHY_LED_DEF 0x0030 -#define MII_88E1121_PHY_PAGE 22 #define MII_M1011_PHY_STATUS 0x11 #define MII_M1011_PHY_STATUS_1000 0x8000 @@ -186,13 +188,94 @@ static int marvell_config_aneg(struct phy_device *phydev) return 0; } +#ifdef CONFIG_OF_MDIO +/* + * Set and/or override some configuration registers based on the + * marvell,reg-init property stored in the of_node for the phydev. + * + * marvell,reg-init = <reg-page reg mask value>,...; + * + * There may be one or more sets of <reg-page reg mask value>: + * + * reg-page: which register bank to use. + * reg: the register. + * mask: if non-zero, ANDed with existing register value. + * value: ORed with the masked value and written to the regiser. + * + */ +static int marvell_of_reg_init(struct phy_device *phydev) +{ + const __be32 *paddr; + int len, i, saved_page, current_page, page_changed, ret; + + if (!phydev->dev.of_node) + return 0; + + paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len); + if (!paddr || len < (4 * sizeof(*paddr))) + return 0; + + saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE); + if (saved_page < 0) + return saved_page; + page_changed = 0; + current_page = saved_page; + + ret = 0; + len /= sizeof(*paddr); + for (i = 0; i < len - 3; i += 4) { + u16 reg_page = be32_to_cpup(paddr + i); + u16 reg = be32_to_cpup(paddr + i + 1); + u16 mask = be32_to_cpup(paddr + i + 2); + u16 val_bits = be32_to_cpup(paddr + i + 3); + int val; + + if (reg_page != current_page) { + current_page = reg_page; + page_changed = 1; + ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page); + if (ret < 0) + goto err; + } + + val = 0; + if (mask) { + val = phy_read(phydev, reg); + if (val < 0) { + ret = val; + goto err; + } + val &= mask; + } + val |= val_bits; + + ret = phy_write(phydev, reg, val); + if (ret < 0) + goto err; + + } +err: + if (page_changed) { + i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page); + if (ret == 0) + ret = i; + } + return ret; +} +#else +static int marvell_of_reg_init(struct phy_device *phydev) +{ + return 0; +} +#endif /* CONFIG_OF_MDIO */ + static int m88e1121_config_aneg(struct phy_device *phydev) { int err, oldpage, mscr; - oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE); + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); - err = phy_write(phydev, MII_88E1121_PHY_PAGE, + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_MSCR_PAGE); if (err < 0) return err; @@ -218,7 +301,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev) return err; } - phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage); + phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); err = phy_write(phydev, MII_BMCR, BMCR_RESET); if (err < 0) @@ -229,36 +312,36 @@ static int m88e1121_config_aneg(struct phy_device *phydev) if (err < 0) return err; - oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE); + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); - phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); + phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF); - phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage); + phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); err = genphy_config_aneg(phydev); return err; } -static int m88ec048_config_aneg(struct phy_device *phydev) +static int m88e1318_config_aneg(struct phy_device *phydev) { int err, oldpage, mscr; - oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE); + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); - err = phy_write(phydev, MII_88E1121_PHY_PAGE, + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_MSCR_PAGE); if (err < 0) return err; - mscr = phy_read(phydev, MII_88EC048_PHY_MSCR1_REG); - mscr |= MII_88EC048_PHY_MSCR1_PAD_ODD; + mscr = phy_read(phydev, MII_88E1318S_PHY_MSCR1_REG); + mscr |= MII_88E1318S_PHY_MSCR1_PAD_ODD; - err = phy_write(phydev, MII_88E1121_PHY_MSCR_REG, mscr); + err = phy_write(phydev, MII_88E1318S_PHY_MSCR1_REG, mscr); if (err < 0) return err; - err = phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage); + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); if (err < 0) return err; @@ -368,6 +451,9 @@ static int m88e1111_config_init(struct phy_device *phydev) return err; } + err = marvell_of_reg_init(phydev); + if (err < 0) + return err; err = phy_write(phydev, MII_BMCR, BMCR_RESET); if (err < 0) @@ -398,7 +484,7 @@ static int m88e1118_config_init(struct phy_device *phydev) int err; /* Change address */ - err = phy_write(phydev, 0x16, 0x0002); + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002); if (err < 0) return err; @@ -408,7 +494,7 @@ static int m88e1118_config_init(struct phy_device *phydev) return err; /* Change address */ - err = phy_write(phydev, 0x16, 0x0003); + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003); if (err < 0) return err; @@ -420,8 +506,42 @@ static int m88e1118_config_init(struct phy_device *phydev) if (err < 0) return err; + err = marvell_of_reg_init(phydev); + if (err < 0) + return err; + /* Reset address */ - err = phy_write(phydev, 0x16, 0x0); + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0); + if (err < 0) + return err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + return 0; +} + +static int m88e1149_config_init(struct phy_device *phydev) +{ + int err; + + /* Change address */ + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002); + if (err < 0) + return err; + + /* Enable 1000 Mbit */ + err = phy_write(phydev, 0x15, 0x1048); + if (err < 0) + return err; + + err = marvell_of_reg_init(phydev); + if (err < 0) + return err; + + /* Reset address */ + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0); if (err < 0) return err; @@ -491,6 +611,10 @@ static int m88e1145_config_init(struct phy_device *phydev) } } + err = marvell_of_reg_init(phydev); + if (err < 0) + return err; + return 0; } @@ -659,12 +783,12 @@ static struct phy_driver marvell_drivers[] = { .driver = { .owner = THIS_MODULE }, }, { - .phy_id = MARVELL_PHY_ID_88EC048, + .phy_id = MARVELL_PHY_ID_88E1318S, .phy_id_mask = MARVELL_PHY_ID_MASK, - .name = "Marvell 88EC048", + .name = "Marvell 88E1318S", .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, - .config_aneg = &m88ec048_config_aneg, + .config_aneg = &m88e1318_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, @@ -685,6 +809,19 @@ static struct phy_driver marvell_drivers[] = { .driver = { .owner = THIS_MODULE }, }, { + .phy_id = MARVELL_PHY_ID_88E1149R, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E1149R", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &m88e1149_config_init, + .config_aneg = &m88e1118_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .driver = { .owner = THIS_MODULE }, + }, + { .phy_id = MARVELL_PHY_ID_88E1240, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1240", @@ -735,6 +872,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = { { 0x01410e10, 0xfffffff0 }, { 0x01410cb0, 0xfffffff0 }, { 0x01410cd0, 0xfffffff0 }, + { 0x01410e50, 0xfffffff0 }, { 0x01410e30, 0xfffffff0 }, { 0x01410e90, 0xfffffff0 }, { } |
