diff options
Diffstat (limited to 'drivers/net/phy')
-rw-r--r-- | drivers/net/phy/Kconfig | 2 | ||||
-rw-r--r-- | drivers/net/phy/amd-xgbe-phy.c | 18 | ||||
-rw-r--r-- | drivers/net/phy/amd.c | 17 | ||||
-rw-r--r-- | drivers/net/phy/at803x.c | 14 | ||||
-rw-r--r-- | drivers/net/phy/bcm63xx.c | 15 | ||||
-rw-r--r-- | drivers/net/phy/bcm7xxx.c | 149 | ||||
-rw-r--r-- | drivers/net/phy/bcm87xx.c | 14 | ||||
-rw-r--r-- | drivers/net/phy/broadcom.c | 15 | ||||
-rw-r--r-- | drivers/net/phy/cicada.c | 15 | ||||
-rw-r--r-- | drivers/net/phy/davicom.c | 15 | ||||
-rw-r--r-- | drivers/net/phy/et1011c.c | 17 | ||||
-rw-r--r-- | drivers/net/phy/icplus.c | 15 | ||||
-rw-r--r-- | drivers/net/phy/lxt.c | 15 | ||||
-rw-r--r-- | drivers/net/phy/marvell.c | 67 | ||||
-rw-r--r-- | drivers/net/phy/micrel.c | 344 | ||||
-rw-r--r-- | drivers/net/phy/national.c | 17 | ||||
-rw-r--r-- | drivers/net/phy/qsemi.c | 17 | ||||
-rw-r--r-- | drivers/net/phy/realtek.c | 13 | ||||
-rw-r--r-- | drivers/net/phy/smsc.c | 14 | ||||
-rw-r--r-- | drivers/net/phy/spi_ks8995.c | 4 | ||||
-rw-r--r-- | drivers/net/phy/ste10Xp.c | 15 | ||||
-rw-r--r-- | drivers/net/phy/vitesse.c | 14 |
22 files changed, 393 insertions, 433 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 75472cf7..b4b0f80 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -26,7 +26,7 @@ config AMD_PHY config AMD_XGBE_PHY tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs" - depends on OF + depends on OF && HAS_IOMEM ---help--- Currently supports the AMD 10GbE PHY diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c index c456559..903dc3d 100644 --- a/drivers/net/phy/amd-xgbe-phy.c +++ b/drivers/net/phy/amd-xgbe-phy.c @@ -992,7 +992,8 @@ static int amd_xgbe_phy_soft_reset(struct phy_device *phydev) if (ret & MDIO_CTRL1_RESET) return -ETIMEDOUT; - return 0; + /* Make sure the XPCS and SerDes are in compatible states */ + return amd_xgbe_phy_xgmii_mode(phydev); } static int amd_xgbe_phy_config_init(struct phy_device *phydev) @@ -1467,20 +1468,7 @@ static struct phy_driver amd_xgbe_phy_driver[] = { }, }; -static int __init amd_xgbe_phy_init(void) -{ - return phy_drivers_register(amd_xgbe_phy_driver, - ARRAY_SIZE(amd_xgbe_phy_driver)); -} - -static void __exit amd_xgbe_phy_exit(void) -{ - phy_drivers_unregister(amd_xgbe_phy_driver, - ARRAY_SIZE(amd_xgbe_phy_driver)); -} - -module_init(amd_xgbe_phy_init); -module_exit(amd_xgbe_phy_exit); +module_phy_driver(amd_xgbe_phy_driver); static struct mdio_device_id __maybe_unused amd_xgbe_phy_ids[] = { { XGBE_PHY_ID, XGBE_PHY_MASK }, diff --git a/drivers/net/phy/amd.c b/drivers/net/phy/amd.c index a3fb5ce..65a488f 100644 --- a/drivers/net/phy/amd.c +++ b/drivers/net/phy/amd.c @@ -61,7 +61,7 @@ static int am79c_config_intr(struct phy_device *phydev) return err; } -static struct phy_driver am79c_driver = { +static struct phy_driver am79c_driver[] = { { .phy_id = PHY_ID_AM79C874, .name = "AM79C874", .phy_id_mask = 0xfffffff0, @@ -73,20 +73,9 @@ static struct phy_driver am79c_driver = { .ack_interrupt = am79c_ack_interrupt, .config_intr = am79c_config_intr, .driver = { .owner = THIS_MODULE,}, -}; - -static int __init am79c_init(void) -{ - return phy_driver_register(&am79c_driver); -} - -static void __exit am79c_exit(void) -{ - phy_driver_unregister(&am79c_driver); -} +} }; -module_init(am79c_init); -module_exit(am79c_exit); +module_phy_driver(am79c_driver); static struct mdio_device_id __maybe_unused amd_tbl[] = { { PHY_ID_AM79C874, 0xfffffff0 }, diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index fdc1b41..f80e19a 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -352,19 +352,7 @@ static struct phy_driver at803x_driver[] = { }, } }; -static int __init atheros_init(void) -{ - return phy_drivers_register(at803x_driver, - ARRAY_SIZE(at803x_driver)); -} - -static void __exit atheros_exit(void) -{ - phy_drivers_unregister(at803x_driver, ARRAY_SIZE(at803x_driver)); -} - -module_init(atheros_init); -module_exit(atheros_exit); +module_phy_driver(at803x_driver); static struct mdio_device_id __maybe_unused atheros_tbl[] = { { ATH8030_PHY_ID, 0xffffffef }, diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c index ac55b08..830ec31 100644 --- a/drivers/net/phy/bcm63xx.c +++ b/drivers/net/phy/bcm63xx.c @@ -100,20 +100,7 @@ static struct phy_driver bcm63xx_driver[] = { .driver = { .owner = THIS_MODULE }, } }; -static int __init bcm63xx_phy_init(void) -{ - return phy_drivers_register(bcm63xx_driver, - ARRAY_SIZE(bcm63xx_driver)); -} - -static void __exit bcm63xx_phy_exit(void) -{ - phy_drivers_unregister(bcm63xx_driver, - ARRAY_SIZE(bcm63xx_driver)); -} - -module_init(bcm63xx_phy_init); -module_exit(bcm63xx_phy_exit); +module_phy_driver(bcm63xx_driver); static struct mdio_device_id __maybe_unused bcm63xx_tbl[] = { { 0x00406000, 0xfffffc00 }, diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index 1d211d3..7a53af4 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -39,45 +39,15 @@ #define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0) #define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1) +#define AFE_RXCONFIG_2 MISC_ADDR(0x38, 2) #define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3) #define AFE_TX_CONFIG MISC_ADDR(0x39, 0) +#define AFE_VDCA_ICTRL_0 MISC_ADDR(0x39, 1) +#define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3) #define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0) #define CORE_EXPB0 0xb0 -static int bcm7445_config_init(struct phy_device *phydev) -{ - int ret; - const struct bcm7445_regs { - int reg; - u16 value; - } bcm7445_regs_cfg[] = { - /* increases ADC latency by 24ns */ - { MII_BCM54XX_EXP_SEL, 0x0038 }, - { MII_BCM54XX_EXP_DATA, 0xAB95 }, - /* increases internal 1V LDO voltage by 5% */ - { MII_BCM54XX_EXP_SEL, 0x2038 }, - { MII_BCM54XX_EXP_DATA, 0xBB22 }, - /* reduce RX low pass filter corner frequency */ - { MII_BCM54XX_EXP_SEL, 0x6038 }, - { MII_BCM54XX_EXP_DATA, 0xFFC5 }, - /* reduce RX high pass filter corner frequency */ - { MII_BCM54XX_EXP_SEL, 0x003a }, - { MII_BCM54XX_EXP_DATA, 0x2002 }, - }; - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(bcm7445_regs_cfg); i++) { - ret = phy_write(phydev, - bcm7445_regs_cfg[i].reg, - bcm7445_regs_cfg[i].value); - if (ret) - return ret; - } - - return 0; -} - static void phy_write_exp(struct phy_device *phydev, u16 reg, u16 value) { @@ -102,7 +72,16 @@ static void phy_write_misc(struct phy_device *phydev, phy_write(phydev, MII_BCM54XX_EXP_DATA, value); } -static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev) +static void r_rc_cal_reset(struct phy_device *phydev) +{ + /* Reset R_CAL/RC_CAL Engine */ + phy_write_exp(phydev, 0x00b0, 0x0010); + + /* Disable Reset R_AL/RC_CAL Engine */ + phy_write_exp(phydev, 0x00b0, 0x0000); +} + +static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev) { /* Increase VCO range to prevent unlocking problem of PLL at low * temp @@ -123,11 +102,7 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev) /* Switch to CORE_BASE1E */ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd); - /* Reset R_CAL/RC_CAL Engine */ - phy_write_exp(phydev, CORE_EXPB0, 0x0010); - - /* Disable Reset R_CAL/RC_CAL Engine */ - phy_write_exp(phydev, CORE_EXPB0, 0x0000); + r_rc_cal_reset(phydev); /* write AFE_RXCONFIG_0 */ phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19); @@ -147,6 +122,71 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev) return 0; } +static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev) +{ + /* AFE_RXCONFIG_0 */ + phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15); + + /* AFE_RXCONFIG_1 */ + phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); + + /* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */ + phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003); + + /* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */ + phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); + + /* AFE_TX_CONFIG, set 1000BT Cfeed=110 for all ports */ + phy_write_misc(phydev, AFE_TX_CONFIG, 0x0061); + + /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */ + phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); + + /* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */ + phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020); + + /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal + * offset for HT=0 code + */ + phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); + + /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */ + phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010); + + /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */ + phy_write_misc(phydev, DSP_TAP10, 0x011b); + + /* Reset R_CAL/RC_CAL engine */ + r_rc_cal_reset(phydev); + + return 0; +} + +static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev) +{ + /* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */ + phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); + + /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */ + phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); + + /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal + * offset for HT=0 code + */ + phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); + + /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */ + phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010); + + /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */ + phy_write_misc(phydev, DSP_TAP10, 0x011b); + + /* Reset R_CAL/RC_CAL engine */ + r_rc_cal_reset(phydev); + + return 0; +} + static int bcm7xxx_apd_enable(struct phy_device *phydev) { int val; @@ -200,15 +240,21 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev) u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags); int ret = 0; - dev_info(&phydev->dev, "PHY revision: 0x%02x, patch: %d\n", rev, patch); + pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n", + dev_name(&phydev->dev), phydev->drv->name, rev, patch); switch (rev) { - case 0xa0: case 0xb0: - ret = bcm7445_config_init(phydev); + ret = bcm7xxx_28nm_b0_afe_config_init(phydev); + break; + case 0xd0: + ret = bcm7xxx_28nm_d0_afe_config_init(phydev); + break; + case 0xe0: + case 0xf0: + ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev); break; default: - ret = bcm7xxx_28nm_afe_config_init(phydev); break; } @@ -336,7 +382,7 @@ static int bcm7xxx_dummy_config_init(struct phy_device *phydev) .features = PHY_GBIT_FEATURES | \ SUPPORTED_Pause | SUPPORTED_Asym_Pause, \ .flags = PHY_IS_INTERNAL, \ - .config_init = bcm7xxx_28nm_afe_config_init, \ + .config_init = bcm7xxx_28nm_config_init, \ .config_aneg = genphy_config_aneg, \ .read_status = genphy_read_status, \ .resume = bcm7xxx_28nm_resume, \ @@ -416,20 +462,7 @@ static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = { { } }; -static int __init bcm7xxx_phy_init(void) -{ - return phy_drivers_register(bcm7xxx_driver, - ARRAY_SIZE(bcm7xxx_driver)); -} - -static void __exit bcm7xxx_phy_exit(void) -{ - phy_drivers_unregister(bcm7xxx_driver, - ARRAY_SIZE(bcm7xxx_driver)); -} - -module_init(bcm7xxx_phy_init); -module_exit(bcm7xxx_phy_exit); +module_phy_driver(bcm7xxx_driver); MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl); diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c index 7997895..1eca204 100644 --- a/drivers/net/phy/bcm87xx.c +++ b/drivers/net/phy/bcm87xx.c @@ -216,18 +216,6 @@ static struct phy_driver bcm87xx_driver[] = { .driver = { .owner = THIS_MODULE }, } }; -static int __init bcm87xx_init(void) -{ - return phy_drivers_register(bcm87xx_driver, - ARRAY_SIZE(bcm87xx_driver)); -} -module_init(bcm87xx_init); - -static void __exit bcm87xx_exit(void) -{ - phy_drivers_unregister(bcm87xx_driver, - ARRAY_SIZE(bcm87xx_driver)); -} -module_exit(bcm87xx_exit); +module_phy_driver(bcm87xx_driver); MODULE_LICENSE("GPL"); diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 854f2c9..a52afb2 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -654,20 +654,7 @@ static struct phy_driver broadcom_drivers[] = { .driver = { .owner = THIS_MODULE }, } }; -static int __init broadcom_init(void) -{ - return phy_drivers_register(broadcom_drivers, - ARRAY_SIZE(broadcom_drivers)); -} - -static void __exit broadcom_exit(void) -{ - phy_drivers_unregister(broadcom_drivers, - ARRAY_SIZE(broadcom_drivers)); -} - -module_init(broadcom_init); -module_exit(broadcom_exit); +module_phy_driver(broadcom_drivers); static struct mdio_device_id __maybe_unused broadcom_tbl[] = { { PHY_ID_BCM5411, 0xfffffff0 }, diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c index b57ce0c..27f5464 100644 --- a/drivers/net/phy/cicada.c +++ b/drivers/net/phy/cicada.c @@ -129,20 +129,7 @@ static struct phy_driver cis820x_driver[] = { .driver = { .owner = THIS_MODULE,}, } }; -static int __init cicada_init(void) -{ - return phy_drivers_register(cis820x_driver, - ARRAY_SIZE(cis820x_driver)); -} - -static void __exit cicada_exit(void) -{ - phy_drivers_unregister(cis820x_driver, - ARRAY_SIZE(cis820x_driver)); -} - -module_init(cicada_init); -module_exit(cicada_exit); +module_phy_driver(cis820x_driver); static struct mdio_device_id __maybe_unused cicada_tbl[] = { { 0x000fc410, 0x000ffff0 }, diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c index d2c08f6..0d16c7d 100644 --- a/drivers/net/phy/davicom.c +++ b/drivers/net/phy/davicom.c @@ -182,20 +182,7 @@ static struct phy_driver dm91xx_driver[] = { .driver = { .owner = THIS_MODULE,}, } }; -static int __init davicom_init(void) -{ - return phy_drivers_register(dm91xx_driver, - ARRAY_SIZE(dm91xx_driver)); -} - -static void __exit davicom_exit(void) -{ - phy_drivers_unregister(dm91xx_driver, - ARRAY_SIZE(dm91xx_driver)); -} - -module_init(davicom_init); -module_exit(davicom_exit); +module_phy_driver(dm91xx_driver); static struct mdio_device_id __maybe_unused davicom_tbl[] = { { 0x0181b880, 0x0ffffff0 }, diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c index a8eb19e..a907743 100644 --- a/drivers/net/phy/et1011c.c +++ b/drivers/net/phy/et1011c.c @@ -87,7 +87,7 @@ static int et1011c_read_status(struct phy_device *phydev) return ret; } -static struct phy_driver et1011c_driver = { +static struct phy_driver et1011c_driver[] = { { .phy_id = 0x0282f014, .name = "ET1011C", .phy_id_mask = 0xfffffff0, @@ -96,20 +96,9 @@ static struct phy_driver et1011c_driver = { .config_aneg = et1011c_config_aneg, .read_status = et1011c_read_status, .driver = { .owner = THIS_MODULE,}, -}; - -static int __init et1011c_init(void) -{ - return phy_driver_register(&et1011c_driver); -} - -static void __exit et1011c_exit(void) -{ - phy_driver_unregister(&et1011c_driver); -} +} }; -module_init(et1011c_init); -module_exit(et1011c_exit); +module_phy_driver(et1011c_driver); static struct mdio_device_id __maybe_unused et1011c_tbl[] = { { 0x0282f014, 0xfffffff0 }, diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index 97bf58b..8644f03 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -253,20 +253,7 @@ static struct phy_driver icplus_driver[] = { .driver = { .owner = THIS_MODULE,}, } }; -static int __init icplus_init(void) -{ - return phy_drivers_register(icplus_driver, - ARRAY_SIZE(icplus_driver)); -} - -static void __exit icplus_exit(void) -{ - phy_drivers_unregister(icplus_driver, - ARRAY_SIZE(icplus_driver)); -} - -module_init(icplus_init); -module_exit(icplus_exit); +module_phy_driver(icplus_driver); static struct mdio_device_id __maybe_unused icplus_tbl[] = { { 0x02430d80, 0x0ffffff0 }, diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c index 9108f31..a3a5a70 100644 --- a/drivers/net/phy/lxt.c +++ b/drivers/net/phy/lxt.c @@ -312,20 +312,7 @@ static struct phy_driver lxt97x_driver[] = { .driver = { .owner = THIS_MODULE,}, } }; -static int __init lxt_init(void) -{ - return phy_drivers_register(lxt97x_driver, - ARRAY_SIZE(lxt97x_driver)); -} - -static void __exit lxt_exit(void) -{ - phy_drivers_unregister(lxt97x_driver, - ARRAY_SIZE(lxt97x_driver)); -} - -module_init(lxt_init); -module_exit(lxt_exit); +module_phy_driver(lxt97x_driver); static struct mdio_device_id __maybe_unused lxt_tbl[] = { { 0x78100000, 0xfffffff0 }, diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 225c033..1b1698f 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -54,6 +54,9 @@ #define MII_M1145_PHY_EXT_CR 0x14 #define MII_M1145_RGMII_RX_DELAY 0x0080 #define MII_M1145_RGMII_TX_DELAY 0x0002 +#define MII_M1145_HWCFG_MODE_SGMII_NO_CLK 0x4 +#define MII_M1145_HWCFG_MODE_MASK 0xf +#define MII_M1145_HWCFG_FIBER_COPPER_AUTO 0x8000 #define MII_M1145_HWCFG_MODE_SGMII_NO_CLK 0x4 #define MII_M1145_HWCFG_MODE_MASK 0xf @@ -123,6 +126,9 @@ #define MII_M1116R_CONTROL_REG_MAC 21 +#define MII_88E3016_PHY_SPEC_CTRL 0x10 +#define MII_88E3016_DISABLE_SCRAMBLER 0x0200 +#define MII_88E3016_AUTO_MDIX_CROSSOVER 0x0030 MODULE_DESCRIPTION("Marvell PHY driver"); MODULE_AUTHOR("Andy Fleming"); @@ -439,6 +445,25 @@ static int m88e1116r_config_init(struct phy_device *phydev) return 0; } +static int m88e3016_config_init(struct phy_device *phydev) +{ + int reg; + + /* Enable Scrambler and Auto-Crossover */ + reg = phy_read(phydev, MII_88E3016_PHY_SPEC_CTRL); + if (reg < 0) + return reg; + + reg &= ~MII_88E3016_DISABLE_SCRAMBLER; + reg |= MII_88E3016_AUTO_MDIX_CROSSOVER; + + reg = phy_write(phydev, MII_88E3016_PHY_SPEC_CTRL, reg); + if (reg < 0) + return reg; + + return 0; +} + static int m88e1111_config_init(struct phy_device *phydev) { int err; @@ -625,6 +650,7 @@ static int m88e1149_config_init(struct phy_device *phydev) static int m88e1145_config_init(struct phy_device *phydev) { int err; + int temp; /* Take care of errata E0 & E1 */ err = phy_write(phydev, 0x1d, 0x001b); @@ -682,7 +708,7 @@ static int m88e1145_config_init(struct phy_device *phydev) } if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { - int temp = phy_read(phydev, MII_M1145_PHY_EXT_SR); + temp = phy_read(phydev, MII_M1145_PHY_EXT_SR); if (temp < 0) return temp; @@ -789,6 +815,12 @@ static int marvell_read_status(struct phy_device *phydev) return 0; } +static int marvell_aneg_done(struct phy_device *phydev) +{ + int retval = phy_read(phydev, MII_M1011_PHY_STATUS); + return (retval < 0) ? retval : (retval & MII_M1011_PHY_STATUS_RESOLVED); +} + static int m88e1121_did_interrupt(struct phy_device *phydev) { int imask; @@ -1069,22 +1101,26 @@ static struct phy_driver marvell_drivers[] = { .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, + { + .phy_id = MARVELL_PHY_ID_88E3016, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E3016", + .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .config_init = &m88e3016_config_init, + .aneg_done = &marvell_aneg_done, + .read_status = &marvell_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .did_interrupt = &m88e1121_did_interrupt, + .resume = &genphy_resume, + .suspend = &genphy_suspend, + .driver = { .owner = THIS_MODULE }, + }, }; -static int __init marvell_init(void) -{ - return phy_drivers_register(marvell_drivers, - ARRAY_SIZE(marvell_drivers)); -} - -static void __exit marvell_exit(void) -{ - phy_drivers_unregister(marvell_drivers, - ARRAY_SIZE(marvell_drivers)); -} - -module_init(marvell_init); -module_exit(marvell_exit); +module_phy_driver(marvell_drivers); static struct mdio_device_id __maybe_unused marvell_tbl[] = { { MARVELL_PHY_ID_88E1101, MARVELL_PHY_ID_MASK }, @@ -1098,6 +1134,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = { { MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1510, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E3016, MARVELL_PHY_ID_MASK }, { } }; diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 8c2a29a..c530de1 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -6,6 +6,7 @@ * Author: David J. Choi * * Copyright (c) 2010-2013 Micrel, Inc. + * Copyright (c) 2014 Johan Hovold <johan@kernel.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -30,30 +31,32 @@ /* Operation Mode Strap Override */ #define MII_KSZPHY_OMSO 0x16 -#define KSZPHY_OMSO_B_CAST_OFF (1 << 9) -#define KSZPHY_OMSO_RMII_OVERRIDE (1 << 1) -#define KSZPHY_OMSO_MII_OVERRIDE (1 << 0) +#define KSZPHY_OMSO_B_CAST_OFF BIT(9) +#define KSZPHY_OMSO_RMII_OVERRIDE BIT(1) +#define KSZPHY_OMSO_MII_OVERRIDE BIT(0) /* general Interrupt control/status reg in vendor specific block. */ #define MII_KSZPHY_INTCS 0x1B -#define KSZPHY_INTCS_JABBER (1 << 15) -#define KSZPHY_INTCS_RECEIVE_ERR (1 << 14) -#define KSZPHY_INTCS_PAGE_RECEIVE (1 << 13) -#define KSZPHY_INTCS_PARELLEL (1 << 12) -#define KSZPHY_INTCS_LINK_PARTNER_ACK (1 << 11) -#define KSZPHY_INTCS_LINK_DOWN (1 << 10) -#define KSZPHY_INTCS_REMOTE_FAULT (1 << 9) -#define KSZPHY_INTCS_LINK_UP (1 << 8) +#define KSZPHY_INTCS_JABBER BIT(15) +#define KSZPHY_INTCS_RECEIVE_ERR BIT(14) +#define KSZPHY_INTCS_PAGE_RECEIVE BIT(13) +#define KSZPHY_INTCS_PARELLEL BIT(12) +#define KSZPHY_INTCS_LINK_PARTNER_ACK BIT(11) +#define KSZPHY_INTCS_LINK_DOWN BIT(10) +#define KSZPHY_INTCS_REMOTE_FAULT BIT(9) +#define KSZPHY_INTCS_LINK_UP BIT(8) #define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\ KSZPHY_INTCS_LINK_DOWN) -/* general PHY control reg in vendor specific block. */ -#define MII_KSZPHY_CTRL 0x1F +/* PHY Control 1 */ +#define MII_KSZPHY_CTRL_1 0x1e + +/* PHY Control 2 / PHY Control (if no PHY Control 1) */ +#define MII_KSZPHY_CTRL_2 0x1f +#define MII_KSZPHY_CTRL MII_KSZPHY_CTRL_2 /* bitmap of PHY register to set interrupt mode */ -#define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9) -#define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14) -#define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14) -#define KSZ8051_RMII_50MHZ_CLK (1 << 7) +#define KSZPHY_CTRL_INT_ACTIVE_HIGH BIT(9) +#define KSZPHY_RMII_REF_CLK_SEL BIT(7) /* Write/read to/from extended registers */ #define MII_KSZPHY_EXTREG 0x0b @@ -69,20 +72,46 @@ #define PS_TO_REG 200 -static int ksz_config_flags(struct phy_device *phydev) -{ - int regval; +struct kszphy_type { + u32 led_mode_reg; + u16 interrupt_level_mask; + bool has_broadcast_disable; + bool has_rmii_ref_clk_sel; +}; - if (phydev->dev_flags & (MICREL_PHY_50MHZ_CLK | MICREL_PHY_25MHZ_CLK)) { - regval = phy_read(phydev, MII_KSZPHY_CTRL); - if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) - regval |= KSZ8051_RMII_50MHZ_CLK; - else - regval &= ~KSZ8051_RMII_50MHZ_CLK; - return phy_write(phydev, MII_KSZPHY_CTRL, regval); - } - return 0; -} +struct kszphy_priv { + const struct kszphy_type *type; + int led_mode; + bool rmii_ref_clk_sel; + bool rmii_ref_clk_sel_val; +}; + +static const struct kszphy_type ksz8021_type = { + .led_mode_reg = MII_KSZPHY_CTRL_2, + .has_rmii_ref_clk_sel = true, +}; + +static const struct kszphy_type ksz8041_type = { + .led_mode_reg = MII_KSZPHY_CTRL_1, +}; + +static const struct kszphy_type ksz8051_type = { + .led_mode_reg = MII_KSZPHY_CTRL_2, +}; + +static const struct kszphy_type ksz8081_type = { + .led_mode_reg = MII_KSZPHY_CTRL_2, + .has_broadcast_disable = true, + .has_rmii_ref_clk_sel = true, +}; + +static const struct kszphy_type ks8737_type = { + .interrupt_level_mask = BIT(14), +}; + +static const struct kszphy_type ksz9021_type = { + .interrupt_level_mask = BIT(14), +}; static int kszphy_extended_write(struct phy_device *phydev, u32 regnum, u16 val) @@ -108,112 +137,137 @@ static int kszphy_ack_interrupt(struct phy_device *phydev) return (rc < 0) ? rc : 0; } -static int kszphy_set_interrupt(struct phy_device *phydev) +static int kszphy_config_intr(struct phy_device *phydev) { + const struct kszphy_type *type = phydev->drv->driver_data; int temp; - temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ? - KSZPHY_INTCS_ALL : 0; - return phy_write(phydev, MII_KSZPHY_INTCS, temp); -} + u16 mask; -static int kszphy_config_intr(struct phy_device *phydev) -{ - int temp, rc; + if (type && type->interrupt_level_mask) + mask = type->interrupt_level_mask; + else + mask = KSZPHY_CTRL_INT_ACTIVE_HIGH; /* set the interrupt pin active low */ temp = phy_read(phydev, MII_KSZPHY_CTRL); - temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH; + if (temp < 0) + return temp; + temp &= ~mask; phy_write(phydev, MII_KSZPHY_CTRL, temp); - rc = kszphy_set_interrupt(phydev); - return rc < 0 ? rc : 0; -} -static int ksz9021_config_intr(struct phy_device *phydev) -{ - int temp, rc; + /* enable / disable interrupts */ + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + temp = KSZPHY_INTCS_ALL; + else + temp = 0; - /* set the interrupt pin active low */ - temp = phy_read(phydev, MII_KSZPHY_CTRL); - temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH; - phy_write(phydev, MII_KSZPHY_CTRL, temp); - rc = kszphy_set_interrupt(phydev); - return rc < 0 ? rc : 0; + return phy_write(phydev, MII_KSZPHY_INTCS, temp); } -static int ks8737_config_intr(struct phy_device *phydev) +static int kszphy_rmii_clk_sel(struct phy_device *phydev, bool val) { - int temp, rc; + int ctrl; - /* set the interrupt pin active low */ - temp = phy_read(phydev, MII_KSZPHY_CTRL); - temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH; - phy_write(phydev, MII_KSZPHY_CTRL, temp); - rc = kszphy_set_interrupt(phydev); - return rc < 0 ? rc : 0; -} - -static int kszphy_setup_led(struct phy_device *phydev, - unsigned int reg, unsigned int shift) -{ + ctrl = phy_read(phydev, MII_KSZPHY_CTRL); + if (ctrl < 0) + return ctrl; - struct device *dev = &phydev->dev; - struct device_node *of_node = dev->of_node; - int rc, temp; - u32 val; + if (val) + ctrl |= KSZPHY_RMII_REF_CLK_SEL; + else + ctrl &= ~KSZPHY_RMII_REF_CLK_SEL; - if (!of_node && dev->parent->of_node) - of_node = dev->parent->of_node; + return phy_write(phydev, MII_KSZPHY_CTRL, ctrl); +} - if (of_property_read_u32(of_node, "micrel,led-mode", &val)) - return 0; +static int kszphy_setup_led(struct phy_device *phydev, u32 reg, int val) +{ + int rc, temp, shift; + + switch (reg) { + case MII_KSZPHY_CTRL_1: + shift = 14; + break; + case MII_KSZPHY_CTRL_2: + shift = 4; + break; + default: + return -EINVAL; + } temp = phy_read(phydev, reg); - if (temp < 0) - return temp; + if (temp < 0) { + rc = temp; + goto out; + } temp &= ~(3 << shift); temp |= val << shift; rc = phy_write(phydev, reg, temp); +out: + if (rc < 0) + dev_err(&phydev->dev, "failed to set led mode\n"); - return rc < 0 ? rc : 0; + return rc; } -static int kszphy_config_init(struct phy_device *phydev) +/* Disable PHY address 0 as the broadcast address, so that it can be used as a + * unique (non-broadcast) address on a shared bus. + */ +static int kszphy_broadcast_disable(struct phy_device *phydev) { - return 0; -} + int ret; -static int kszphy_config_init_led8041(struct phy_device *phydev) -{ - /* single led control, register 0x1e bits 15..14 */ - return kszphy_setup_led(phydev, 0x1e, 14); + ret = phy_read(phydev, MII_KSZPHY_OMSO); + if (ret < 0) + goto out; + + ret = phy_write(phydev, MII_KSZPHY_OMSO, ret | KSZPHY_OMSO_B_CAST_OFF); +out: + if (ret) + dev_err(&phydev->dev, "failed to disable broadcast address\n"); + + return ret; } -static int ksz8021_config_init(struct phy_device *phydev) +static int kszphy_config_init(struct phy_device *phydev) { - const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE; - int rc; + struct kszphy_priv *priv = phydev->priv; + const struct kszphy_type *type; + int ret; - rc = kszphy_setup_led(phydev, 0x1f, 4); - if (rc) - dev_err(&phydev->dev, "failed to set led mode\n"); + if (!priv) + return 0; - rc = ksz_config_flags(phydev); - if (rc < 0) - return rc; - rc = phy_write(phydev, MII_KSZPHY_OMSO, val); - return rc < 0 ? rc : 0; + type = priv->type; + + if (type->has_broadcast_disable) + kszphy_broadcast_disable(phydev); + + if (priv->rmii_ref_clk_sel) { + ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val); + if (ret) { + dev_err(&phydev->dev, "failed to set rmii reference clock\n"); + return ret; + } + } + + if (priv->led_mode >= 0) + kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode); + + return 0; } -static int ks8051_config_init(struct phy_device *phydev) +static int ksz8021_config_init(struct phy_device *phydev) { int rc; - rc = kszphy_setup_led(phydev, 0x1f, 4); + rc = kszphy_config_init(phydev); if (rc) - dev_err(&phydev->dev, "failed to set led mode\n"); + return rc; + + rc = kszphy_broadcast_disable(phydev); - rc = ksz_config_flags(phydev); return rc < 0 ? rc : 0; } @@ -394,8 +448,8 @@ static int ksz9031_config_init(struct phy_device *phydev) } #define KSZ8873MLL_GLOBAL_CONTROL_4 0x06 -#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6) -#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4) +#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX BIT(6) +#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED BIT(4) static int ksz8873mll_read_status(struct phy_device *phydev) { int regval; @@ -446,24 +500,62 @@ ksz9021_wr_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum, { } -static int ksz8021_probe(struct phy_device *phydev) +static int kszphy_probe(struct phy_device *phydev) { + const struct kszphy_type *type = phydev->drv->driver_data; + struct device_node *np = phydev->dev.of_node; + struct kszphy_priv *priv; struct clk *clk; + int ret; + + priv = devm_kzalloc(&phydev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + priv->type = type; + + if (type->led_mode_reg) { + ret = of_property_read_u32(np, "micrel,led-mode", + &priv->led_mode); + if (ret) + priv->led_mode = -1; + + if (priv->led_mode > 3) { + dev_err(&phydev->dev, "invalid led mode: 0x%02x\n", + priv->led_mode); + priv->led_mode = -1; + } + } else { + priv->led_mode = -1; + } clk = devm_clk_get(&phydev->dev, "rmii-ref"); if (!IS_ERR(clk)) { unsigned long rate = clk_get_rate(clk); + bool rmii_ref_clk_sel_25_mhz; + + priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel; + rmii_ref_clk_sel_25_mhz = of_property_read_bool(np, + "micrel,rmii-reference-clock-select-25-mhz"); if (rate > 24500000 && rate < 25500000) { - phydev->dev_flags |= MICREL_PHY_25MHZ_CLK; + priv->rmii_ref_clk_sel_val = rmii_ref_clk_sel_25_mhz; } else if (rate > 49500000 && rate < 50500000) { - phydev->dev_flags |= MICREL_PHY_50MHZ_CLK; + priv->rmii_ref_clk_sel_val = !rmii_ref_clk_sel_25_mhz; } else { dev_err(&phydev->dev, "Clock rate out of range: %ld\n", rate); return -EINVAL; } } + /* Support legacy board-file configuration */ + if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) { + priv->rmii_ref_clk_sel = true; + priv->rmii_ref_clk_sel_val = true; + } + return 0; } @@ -474,11 +566,12 @@ static struct phy_driver ksphy_driver[] = { .name = "Micrel KS8737", .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .driver_data = &ks8737_type, .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, - .config_intr = ks8737_config_intr, + .config_intr = kszphy_config_intr, .suspend = genphy_suspend, .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, @@ -489,7 +582,8 @@ static struct phy_driver ksphy_driver[] = { .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .probe = ksz8021_probe, + .driver_data = &ksz8021_type, + .probe = kszphy_probe, .config_init = ksz8021_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, @@ -505,7 +599,8 @@ static struct phy_driver ksphy_driver[] = { .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .probe = ksz8021_probe, + .driver_data = &ksz8021_type, + .probe = kszphy_probe, .config_init = ksz8021_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, @@ -521,7 +616,9 @@ static struct phy_driver ksphy_driver[] = { .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = kszphy_config_init_led8041, + .driver_data = &ksz8041_type, + .probe = kszphy_probe, + .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, @@ -536,7 +633,9 @@ static struct phy_driver ksphy_driver[] = { .features = PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = kszphy_config_init_led8041, + .driver_data = &ksz8041_type, + .probe = kszphy_probe, + .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, @@ -551,7 +650,9 @@ static struct phy_driver ksphy_driver[] = { .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = ks8051_config_init, + .driver_data = &ksz8051_type, + .probe = kszphy_probe, + .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, @@ -565,7 +666,9 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = 0x00ffffff, .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = kszphy_config_init_led8041, + .driver_data = &ksz8041_type, + .probe = kszphy_probe, + .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, @@ -579,6 +682,8 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = 0x00fffff0, .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .driver_data = &ksz8081_type, + .probe = kszphy_probe, .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, @@ -607,11 +712,12 @@ static struct phy_driver ksphy_driver[] = { .name = "Micrel KSZ9021 Gigabit PHY", .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .driver_data = &ksz9021_type, .config_init = ksz9021_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, - .config_intr = ksz9021_config_intr, + .config_intr = kszphy_config_intr, .suspend = genphy_suspend, .resume = genphy_resume, .read_mmd_indirect = ksz9021_rd_mmd_phyreg, @@ -623,11 +729,12 @@ static struct phy_driver ksphy_driver[] = { .name = "Micrel KSZ9031 Gigabit PHY", .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .driver_data = &ksz9021_type, .config_init = ksz9031_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, - .config_intr = ksz9021_config_intr, + .config_intr = kszphy_config_intr, .suspend = genphy_suspend, .resume = genphy_resume, .driver = { .owner = THIS_MODULE, }, @@ -657,20 +764,7 @@ static struct phy_driver ksphy_driver[] = { .driver = { .owner = THIS_MODULE, }, } }; -static int __init ksphy_init(void) -{ - return phy_drivers_register(ksphy_driver, - ARRAY_SIZE(ksphy_driver)); -} - -static void __exit ksphy_exit(void) -{ - phy_drivers_unregister(ksphy_driver, - ARRAY_SIZE(ksphy_driver)); -} - -module_init(ksphy_init); -module_exit(ksphy_exit); +module_phy_driver(ksphy_driver); MODULE_DESCRIPTION("Micrel PHY driver"); MODULE_AUTHOR("David J. Choi"); diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c index 9a5f234..0a7b9c7 100644 --- a/drivers/net/phy/national.c +++ b/drivers/net/phy/national.c @@ -129,7 +129,7 @@ static int ns_config_init(struct phy_device *phydev) return ns_ack_interrupt(phydev); } -static struct phy_driver dp83865_driver = { +static struct phy_driver dp83865_driver[] = { { .phy_id = DP83865_PHY_ID, .phy_id_mask = 0xfffffff0, .name = "NatSemi DP83865", @@ -141,25 +141,14 @@ static struct phy_driver dp83865_driver = { .ack_interrupt = ns_ack_interrupt, .config_intr = ns_config_intr, .driver = {.owner = THIS_MODULE,} -}; +} }; -static int __init ns_init(void) -{ - return phy_driver_register(&dp83865_driver); -} - -static void __exit ns_exit(void) -{ - phy_driver_unregister(&dp83865_driver); -} +module_phy_driver(dp83865_driver); MODULE_DESCRIPTION("NatSemi PHY driver"); MODULE_AUTHOR("Stuart Menefy"); MODULE_LICENSE("GPL"); -module_init(ns_init); -module_exit(ns_exit); - static struct mdio_device_id __maybe_unused ns_tbl[] = { { DP83865_PHY_ID, 0xfffffff0 }, { } diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c index fe0d0a1..be4c6f7 100644 --- a/drivers/net/phy/qsemi.c +++ b/drivers/net/phy/qsemi.c @@ -111,7 +111,7 @@ static int qs6612_config_intr(struct phy_device *phydev) } -static struct phy_driver qs6612_driver = { +static struct phy_driver qs6612_driver[] = { { .phy_id = 0x00181440, .name = "QS6612", .phy_id_mask = 0xfffffff0, @@ -123,20 +123,9 @@ static struct phy_driver qs6612_driver = { .ack_interrupt = qs6612_ack_interrupt, .config_intr = qs6612_config_intr, .driver = { .owner = THIS_MODULE,}, -}; - -static int __init qs6612_init(void) -{ - return phy_driver_register(&qs6612_driver); -} - -static void __exit qs6612_exit(void) -{ - phy_driver_unregister(&qs6612_driver); -} +} }; -module_init(qs6612_init); -module_exit(qs6612_exit); +module_phy_driver(qs6612_driver); static struct mdio_device_id __maybe_unused qs6612_tbl[] = { { 0x00181440, 0xfffffff0 }, diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 45483fd..96a0f0f 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -101,18 +101,7 @@ static struct phy_driver realtek_drvs[] = { }, }; -static int __init realtek_init(void) -{ - return phy_drivers_register(realtek_drvs, ARRAY_SIZE(realtek_drvs)); -} - -static void __exit realtek_exit(void) -{ - phy_drivers_unregister(realtek_drvs, ARRAY_SIZE(realtek_drvs)); -} - -module_init(realtek_init); -module_exit(realtek_exit); +module_phy_driver(realtek_drvs); static struct mdio_device_id __maybe_unused realtek_tbl[] = { { 0x001cc912, 0x001fffff }, diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index a4b0819..c0f6479e 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -250,24 +250,12 @@ static struct phy_driver smsc_phy_driver[] = { .driver = { .owner = THIS_MODULE, } } }; -static int __init smsc_init(void) -{ - return phy_drivers_register(smsc_phy_driver, - ARRAY_SIZE(smsc_phy_driver)); -} - -static void __exit smsc_exit(void) -{ - phy_drivers_unregister(smsc_phy_driver, ARRAY_SIZE(smsc_phy_driver)); -} +module_phy_driver(smsc_phy_driver); MODULE_DESCRIPTION("SMSC PHY driver"); MODULE_AUTHOR("Herbert Valerio Riedel"); MODULE_LICENSE("GPL"); -module_init(smsc_init); -module_exit(smsc_exit); - static struct mdio_device_id __maybe_unused smsc_tbl[] = { { 0x0007c0a0, 0xfffffff0 }, { 0x0007c0b0, 0xfffffff0 }, diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c index eab57fc..4653015 100644 --- a/drivers/net/phy/spi_ks8995.c +++ b/drivers/net/phy/spi_ks8995.c @@ -353,7 +353,9 @@ static int ks8995_probe(struct spi_device *spi) static int ks8995_remove(struct spi_device *spi) { - sysfs_remove_bin_file(&spi->dev.kobj, &ks8995_registers_attr); + struct ks8995_switch *ks = spi_get_drvdata(spi); + + sysfs_remove_bin_file(&spi->dev.kobj, &ks->regs_attr); return 0; } diff --git a/drivers/net/phy/ste10Xp.c b/drivers/net/phy/ste10Xp.c index 5e1eb13..3fc199b 100644 --- a/drivers/net/phy/ste10Xp.c +++ b/drivers/net/phy/ste10Xp.c @@ -112,20 +112,7 @@ static struct phy_driver ste10xp_pdriver[] = { .driver = {.owner = THIS_MODULE,} } }; -static int __init ste10Xp_init(void) -{ - return phy_drivers_register(ste10xp_pdriver, - ARRAY_SIZE(ste10xp_pdriver)); -} - -static void __exit ste10Xp_exit(void) -{ - phy_drivers_unregister(ste10xp_pdriver, - ARRAY_SIZE(ste10xp_pdriver)); -} - -module_init(ste10Xp_init); -module_exit(ste10Xp_exit); +module_phy_driver(ste10xp_pdriver); static struct mdio_device_id __maybe_unused ste10Xp_tbl[] = { { STE101P_PHY_ID, 0xfffffff0 }, diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 5dc0935d..76cad71 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -311,19 +311,7 @@ static struct phy_driver vsc82xx_driver[] = { .driver = { .owner = THIS_MODULE,}, } }; -static int __init vsc82xx_init(void) -{ - return phy_drivers_register(vsc82xx_driver, - ARRAY_SIZE(vsc82xx_driver)); -} - -static void __exit vsc82xx_exit(void) -{ - phy_drivers_unregister(vsc82xx_driver, ARRAY_SIZE(vsc82xx_driver)); -} - -module_init(vsc82xx_init); -module_exit(vsc82xx_exit); +module_phy_driver(vsc82xx_driver); static struct mdio_device_id __maybe_unused vitesse_tbl[] = { { PHY_ID_VSC8234, 0x000ffff0 }, |