diff options
Diffstat (limited to 'drivers/net/phy/marvell.c')
| -rw-r--r-- | drivers/net/phy/marvell.c | 67 |
1 files changed, 23 insertions, 44 deletions
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index f7c69ca..cbec296 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -265,7 +265,7 @@ static int marvell_set_polarity(struct phy_device *phydev, int polarity) return err; } - return 0; + return val != reg; } static int marvell_set_downshift(struct phy_device *phydev, bool enable, @@ -287,12 +287,15 @@ static int marvell_set_downshift(struct phy_device *phydev, bool enable, static int marvell_config_aneg(struct phy_device *phydev) { + int changed = 0; int err; err = marvell_set_polarity(phydev, phydev->mdix_ctrl); if (err < 0) return err; + changed = err; + err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL, MII_M1111_PHY_LED_DIRECT); if (err < 0) @@ -302,7 +305,7 @@ static int marvell_config_aneg(struct phy_device *phydev) if (err < 0) return err; - if (phydev->autoneg != AUTONEG_ENABLE) { + if (phydev->autoneg != AUTONEG_ENABLE || changed) { /* A write to speed/duplex bits (that is performed by * genphy_config_aneg() call above) must be followed by * a software reset. Otherwise, the write has no effect. @@ -350,42 +353,6 @@ static int m88e1101_config_aneg(struct phy_device *phydev) return marvell_config_aneg(phydev); } -static int m88e1111_config_aneg(struct phy_device *phydev) -{ - int err; - - /* The Marvell PHY has an errata which requires - * that certain registers get written in order - * to restart autonegotiation - */ - err = genphy_soft_reset(phydev); - - err = marvell_set_polarity(phydev, phydev->mdix_ctrl); - if (err < 0) - return err; - - err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL, - MII_M1111_PHY_LED_DIRECT); - if (err < 0) - return err; - - err = genphy_config_aneg(phydev); - if (err < 0) - return err; - - if (phydev->autoneg != AUTONEG_ENABLE) { - /* A write to speed/duplex bits (that is performed by - * genphy_config_aneg() call above) must be followed by - * a software reset. Otherwise, the write has no effect. - */ - err = genphy_soft_reset(phydev); - if (err < 0) - return err; - } - - return 0; -} - #ifdef CONFIG_OF_MDIO /* Set and/or override some configuration registers based on the * marvell,reg-init property stored in the of_node for the phydev. @@ -479,6 +446,7 @@ static int m88e1121_config_aneg_rgmii_delays(struct phy_device *phydev) static int m88e1121_config_aneg(struct phy_device *phydev) { + int changed = 0; int err = 0; if (phy_interface_is_rgmii(phydev)) { @@ -487,15 +455,26 @@ static int m88e1121_config_aneg(struct phy_device *phydev) return err; } - err = genphy_soft_reset(phydev); + err = marvell_set_polarity(phydev, phydev->mdix_ctrl); if (err < 0) return err; - err = marvell_set_polarity(phydev, phydev->mdix_ctrl); + changed = err; + + err = genphy_config_aneg(phydev); if (err < 0) return err; - return genphy_config_aneg(phydev); + if (phydev->autoneg != AUTONEG_ENABLE || changed) { + /* A software reset is used to ensure a "commit" of the + * changes is done. + */ + err = genphy_soft_reset(phydev); + if (err < 0) + return err; + } + + return 0; } static int m88e1318_config_aneg(struct phy_device *phydev) @@ -659,7 +638,7 @@ static void marvell_config_led(struct phy_device *phydev) err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, MII_PHY_LED_CTRL, def_config); if (err < 0) - pr_warn("Fail to config marvell phy LED.\n"); + phydev_warn(phydev, "Fail to config marvell phy LED.\n"); } static int marvell_config_init(struct phy_device *phydev) @@ -2067,7 +2046,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1111_config_init, - .config_aneg = &m88e1111_config_aneg, + .config_aneg = &marvell_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, @@ -2222,7 +2201,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id = MARVELL_PHY_ID_88E1510, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1510", - .features = PHY_GBIT_FEATURES | SUPPORTED_FIBRE, + .features = PHY_GBIT_FIBRE_FEATURES, .flags = PHY_HAS_INTERRUPT, .probe = &m88e1510_probe, .config_init = &m88e1510_config_init, |
