diff options
Diffstat (limited to 'drivers/net/pcmcia/xirc2ps_cs.c')
| -rw-r--r-- | drivers/net/pcmcia/xirc2ps_cs.c | 60 |
1 files changed, 27 insertions, 33 deletions
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index b6c36448..4eb6f98 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -82,7 +82,6 @@ #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> @@ -678,9 +677,9 @@ xirc2ps_config_modem(struct pcmcia_device *p_dev, if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - p_dev->io.BasePort2 = cf->io.win[0].base; - p_dev->io.BasePort1 = ioaddr; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->resource[0]->start = ioaddr; + if (!pcmcia_request_io(p_dev)) return 0; } } @@ -697,11 +696,11 @@ xirc2ps_config_check(struct pcmcia_device *p_dev, int *pass = priv_data; if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - p_dev->io.BasePort2 = cf->io.win[0].base; - p_dev->io.BasePort1 = p_dev->io.BasePort2 + p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->resource[0]->start = p_dev->resource[1]->start + (*pass ? (cf->index & 0x20 ? -24:8) : (cf->index & 0x20 ? 8:-24)); - if (!pcmcia_request_io(p_dev, &p_dev->io)) + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -808,8 +807,7 @@ xirc2ps_config(struct pcmcia_device * link) goto failure; } - link->io.IOAddrLines =10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; if (local->modem) { int pass; @@ -817,16 +815,16 @@ xirc2ps_config(struct pcmcia_device * link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status |= CCSR_AUDIO_ENA; } - link->io.NumPorts2 = 8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + link->resource[1]->end = 8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (local->dingo) { /* Take the Modem IO port from the CIS and scan for a free * Ethernet port */ - link->io.NumPorts1 = 16; /* no Mako stuff anymore */ + link->resource[0]->end = 16; /* no Mako stuff anymore */ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) goto port_found; } else { - link->io.NumPorts1 = 18; + link->resource[0]->end = 18; /* We do 2 passes here: The first one uses the regular mapping and * the second tries again, thereby considering that the 32 ports are * mirrored every 32 bytes. Actually we use a mirrored port for @@ -841,14 +839,15 @@ xirc2ps_config(struct pcmcia_device * link) } printk(KNOT_XIRC "no ports available\n"); } else { - link->io.NumPorts1 = 16; + link->io_lines = 10; + link->resource[0]->end = 16; for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - link->io.BasePort1 = ioaddr; - if (!(err=pcmcia_request_io(link, &link->io))) + link->resource[0]->start = ioaddr; + if (!(err = pcmcia_request_io(link))) goto port_found; } - link->io.BasePort1 = 0; /* let CS decide */ - if ((err=pcmcia_request_io(link, &link->io))) + link->resource[0]->start = 0; /* let CS decide */ + if ((err = pcmcia_request_io(link))) goto config_error; } port_found: @@ -870,24 +869,21 @@ xirc2ps_config(struct pcmcia_device * link) goto config_error; if (local->dingo) { - conf_reg_t reg; win_req_t req; - memreq_t mem; /* Reset the modem's BAR to the correct value * This is necessary because in the RequestConfiguration call, * the base address of the ethernet port (BasePort1) is written * to the BAR registers of the modem. */ - reg.Action = CS_WRITE; - reg.Offset = CISREG_IOBASE_0; - reg.Value = link->io.BasePort2 & 0xff; - if ((err = pcmcia_access_configuration_register(link, ®))) + err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8) + link->resource[1]->start & 0xff); + if (err) goto config_error; - reg.Action = CS_WRITE; - reg.Offset = CISREG_IOBASE_1; - reg.Value = (link->io.BasePort2 >> 8) & 0xff; - if ((err = pcmcia_access_configuration_register(link, ®))) + + err = pcmcia_write_config_byte(link, CISREG_IOBASE_1, + (link->resource[1]->start >> 8) & 0xff); + if (err) goto config_error; /* There is no config entry for the Ethernet part which @@ -901,16 +897,14 @@ xirc2ps_config(struct pcmcia_device * link) goto config_error; local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800; - mem.CardOffset = 0x0; - mem.Page = 0; - if ((err = pcmcia_map_mem_page(link, link->win, &mem))) + if ((err = pcmcia_map_mem_page(link, link->win, 0))) goto config_error; /* Setup the CCRs; there are no infos in the CIS about the Ethernet * part. */ writeb(0x47, local->dingo_ccr + CISREG_COR); - ioaddr = link->io.BasePort1; + ioaddr = link->resource[0]->start; writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0); writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1); @@ -957,7 +951,7 @@ xirc2ps_config(struct pcmcia_device * link) /* we can now register the device with the net subsystem */ dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; if (local->dingo) do_reset(dev, 1); /* a kludge to make the cem56 work */ |
