diff options
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_phy.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 22d21af..09e1911 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -135,6 +135,11 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) **/ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) { + /* Don't reset PHY if it's shut down due to overtemp. */ + if (!hw->phy.reset_if_overtemp && + (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw))) + return 0; + /* * Perform soft PHY reset to the PHY_XS. * This will cause a soft reset to the PHY @@ -1345,3 +1350,28 @@ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, return status; } +/** + * ixgbe_tn_check_overtemp - Checks if an overtemp occured. + * @hw: pointer to hardware structure + * + * Checks if the LASI temp alarm status was triggered due to overtemp + **/ +s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) +{ + s32 status = 0; + u16 phy_data = 0; + + if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM) + goto out; + + /* Check that the LASI temp alarm status was triggered */ + hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG, + MDIO_MMD_PMAPMD, &phy_data); + + if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM)) + goto out; + + status = IXGBE_ERR_OVERTEMP; +out: + return status; +} |
