summaryrefslogtreecommitdiffstats
path: root/drivers/net/ixgbe/ixgbe_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_common.c')
-rw-r--r--drivers/net/ixgbe/ixgbe_common.c1175
1 files changed, 1175 insertions, 0 deletions
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
new file mode 100644
index 0000000..512e3b2
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -0,0 +1,1175 @@
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw);
+
+static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw);
+static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw);
+static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw);
+static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw);
+
+static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw);
+static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw);
+static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
+static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr);
+
+/**
+ * ixgbe_start_hw - Prepare hardware for TX/RX
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware by filling the bus info structure and media type, clears
+ * all on chip counters, initializes receive address registers, multicast
+ * table, VLAN filter table, calls routine to set up link and flow control
+ * settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+s32 ixgbe_start_hw(struct ixgbe_hw *hw)
+{
+ u32 ctrl_ext;
+
+ /* Set the media type */
+ hw->phy.media_type = hw->mac.ops.get_media_type(hw);
+
+ /* Identify the PHY */
+ ixgbe_identify_phy(hw);
+
+ /*
+ * Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table
+ */
+ ixgbe_init_rx_addrs(hw);
+
+ /* Clear the VLAN filter table */
+ ixgbe_clear_vfta(hw);
+
+ /* Set up link */
+ hw->phy.ops.setup(hw);
+
+ /* Clear statistics registers */
+ ixgbe_clear_hw_cntrs(hw);
+
+ /* Set No Snoop Disable */
+ ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+ ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+
+ /* Clear adapter stopped flag */
+ hw->adapter_stopped = false;
+
+ return 0;
+}
+
+/**
+ * ixgbe_init_hw - Generic hardware initialization
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the hardware by reseting the hardware, filling the bus info
+ * structure and media type, clears all on chip counters, initializes receive
+ * address registers, multicast table, VLAN filter table, calls routine to set
+ * up link and flow control settings, and leaves transmit and receive units
+ * disabled and uninitialized
+ **/
+s32 ixgbe_init_hw(struct ixgbe_hw *hw)
+{
+ /* Reset the hardware */
+ hw->mac.ops.reset(hw);
+
+ /* Start the HW */
+ ixgbe_start_hw(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_clear_hw_cntrs - Generic clear hardware counters
+ * @hw: pointer to hardware structure
+ *
+ * Clears all hardware statistics counters by reading them from the hardware
+ * Statistics counters are clear on read.
+ **/
+static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
+{
+ u16 i = 0;
+
+ IXGBE_READ_REG(hw, IXGBE_CRCERRS);
+ IXGBE_READ_REG(hw, IXGBE_ILLERRC);
+ IXGBE_READ_REG(hw, IXGBE_ERRBC);
+ IXGBE_READ_REG(hw, IXGBE_MSPDC);
+ for (i = 0; i < 8; i++)
+ IXGBE_READ_REG(hw, IXGBE_MPC(i));
+
+ IXGBE_READ_REG(hw, IXGBE_MLFC);
+ IXGBE_READ_REG(hw, IXGBE_MRFC);
+ IXGBE_READ_REG(hw, IXGBE_RLEC);
+ IXGBE_READ_REG(hw, IXGBE_LXONTXC);
+ IXGBE_READ_REG(hw, IXGBE_LXONRXC);
+ IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
+ IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
+
+ for (i = 0; i < 8; i++) {
+ IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
+ IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
+ IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
+ IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
+ }
+
+ IXGBE_READ_REG(hw, IXGBE_PRC64);
+ IXGBE_READ_REG(hw, IXGBE_PRC127);
+ IXGBE_READ_REG(hw, IXGBE_PRC255);
+ IXGBE_READ_REG(hw, IXGBE_PRC511);
+ IXGBE_READ_REG(hw, IXGBE_PRC1023);
+ IXGBE_READ_REG(hw, IXGBE_PRC1522);
+ IXGBE_READ_REG(hw, IXGBE_GPRC);
+ IXGBE_READ_REG(hw, IXGBE_BPRC);
+ IXGBE_READ_REG(hw, IXGBE_MPRC);
+ IXGBE_READ_REG(hw, IXGBE_GPTC);
+ IXGBE_READ_REG(hw, IXGBE_GORCL);
+ IXGBE_READ_REG(hw, IXGBE_GORCH);
+ IXGBE_READ_REG(hw, IXGBE_GOTCL);
+ IXGBE_READ_REG(hw, IXGBE_GOTCH);
+ for (i = 0; i < 8; i++)
+ IXGBE_READ_REG(hw, IXGBE_RNBC(i));
+ IXGBE_READ_REG(hw, IXGBE_RUC);
+ IXGBE_READ_REG(hw, IXGBE_RFC);
+ IXGBE_READ_REG(hw, IXGBE_ROC);
+ IXGBE_READ_REG(hw, IXGBE_RJC);
+ IXGBE_READ_REG(hw, IXGBE_MNGPRC);
+ IXGBE_READ_REG(hw, IXGBE_MNGPDC);
+ IXGBE_READ_REG(hw, IXGBE_MNGPTC);
+ IXGBE_READ_REG(hw, IXGBE_TORL);
+ IXGBE_READ_REG(hw, IXGBE_TORH);
+ IXGBE_READ_REG(hw, IXGBE_TPR);
+ IXGBE_READ_REG(hw, IXGBE_TPT);
+ IXGBE_READ_REG(hw, IXGBE_PTC64);
+ IXGBE_READ_REG(hw, IXGBE_PTC127);
+ IXGBE_READ_REG(hw, IXGBE_PTC255);
+ IXGBE_READ_REG(hw, IXGBE_PTC511);
+ IXGBE_READ_REG(hw, IXGBE_PTC1023);
+ IXGBE_READ_REG(hw, IXGBE_PTC1522);
+ IXGBE_READ_REG(hw, IXGBE_MPTC);
+ IXGBE_READ_REG(hw, IXGBE_BPTC);
+ for (i = 0; i < 16; i++) {
+ IXGBE_READ_REG(hw, IXGBE_QPRC(i));
+ IXGBE_READ_REG(hw, IXGBE_QBRC(i));
+ IXGBE_READ_REG(hw, IXGBE_QPTC(i));
+ IXGBE_READ_REG(hw, IXGBE_QBTC(i));
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_get_mac_addr - Generic get MAC address
+ * @hw: pointer to hardware structure
+ * @mac_addr: Adapter MAC address
+ *
+ * Reads the adapter's MAC address from first Receive Address Register (RAR0)
+ * A reset of the adapter must be performed prior to calling this function
+ * in order for the MAC address to have been loaded from the EEPROM into RAR0
+ **/
+s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+ u32 rar_high;
+ u32 rar_low;
+ u16 i;
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0));
+ rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0));
+
+ for (i = 0; i < 4; i++)
+ mac_addr[i] = (u8)(rar_low >> (i*8));
+
+ for (i = 0; i < 2; i++)
+ mac_addr[i+4] = (u8)(rar_high >> (i*8));
+
+ return 0;
+}
+
+s32 ixgbe_read_part_num(struct ixgbe_hw *hw, u32 *part_num)
+{
+ s32 ret_val;
+ u16 data;
+
+ ret_val = ixgbe_read_eeprom(hw, IXGBE_PBANUM0_PTR, &data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ return ret_val;
+ }
+ *part_num = (u32)(data << 16);
+
+ ret_val = ixgbe_read_eeprom(hw, IXGBE_PBANUM1_PTR, &data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ return ret_val;
+ }
+ *part_num |= data;
+
+ return 0;
+}
+
+/**
+ * ixgbe_stop_adapter - Generic stop TX/RX units
+ * @hw: pointer to hardware structure
+ *
+ * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ * disables transmit and receive units. The adapter_stopped flag is used by
+ * the shared code and drivers to determine if the adapter is in a stopped
+ * state and should not touch the hardware.
+ **/
+s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
+{
+ u32 number_of_queues;
+ u32 reg_val;
+ u16 i;
+
+ /*
+ * Set the adapter_stopped flag so other driver functions stop touching
+ * the hardware
+ */
+ hw->adapter_stopped = true;
+
+ /* Disable the receive unit */
+ reg_val = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ reg_val &= ~(IXGBE_RXCTRL_RXEN);
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val);
+ msleep(2);
+
+ /* Clear interrupt mask to stop from interrupts being generated */
+ IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
+
+ /* Clear any pending interrupts */
+ IXGBE_READ_REG(hw, IXGBE_EICR);
+
+ /* Disable the transmit unit. Each queue must be disabled. */
+ number_of_queues = hw->mac.num_tx_queues;
+ for (i = 0; i < number_of_queues; i++) {
+ reg_val = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
+ if (reg_val & IXGBE_TXDCTL_ENABLE) {
+ reg_val &= ~IXGBE_TXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), reg_val);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_led_on - Turns on the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @index: led number to turn on
+ **/
+s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
+{
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ /* To turn on the LED, set mode to ON. */
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+
+ return 0;
+}
+
+/**
+ * ixgbe_led_off - Turns off the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @index: led number to turn off
+ **/
+s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
+{
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ /* To turn off the LED, set mode to OFF. */
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+
+ return 0;
+}
+
+
+/**
+ * ixgbe_init_eeprom - Initialize EEPROM params
+ * @hw: pointer to hardware structure
+ *
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom(struct ixgbe_hw *hw)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ u32 eec;
+ u16 eeprom_size;
+
+ if (eeprom->type == ixgbe_eeprom_uninitialized) {
+ eeprom->type = ixgbe_eeprom_none;
+
+ /*
+ * Check for EEPROM present first.
+ * If not present leave as none
+ */
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ if (eec & IXGBE_EEC_PRES) {
+ eeprom->type = ixgbe_eeprom_spi;
+
+ /*
+ * SPI EEPROM is assumed here. This code would need to
+ * change if a future EEPROM is not SPI.
+ */
+ eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+ IXGBE_EEC_SIZE_SHIFT);
+ eeprom->word_size = 1 << (eeprom_size +
+ IXGBE_EEPROM_WORD_SIZE_SHIFT);
+ }
+
+ if (eec & IXGBE_EEC_ADDR_SIZE)
+ eeprom->address_bits = 16;
+ else
+ eeprom->address_bits = 8;
+ hw_dbg(hw, "Eeprom params: type = %d, size = %d, address bits: "
+ "%d\n", eeprom->type, eeprom->word_size,
+ eeprom->address_bits);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_read_eeprom - Read EEPROM word using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+ u32 eerd;
+ s32 status;
+
+ eerd = (offset << IXGBE_EEPROM_READ_ADDR_SHIFT) +
+ IXGBE_EEPROM_READ_REG_START;
+
+ IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
+ status = ixgbe_poll_eeprom_eerd_done(hw);
+
+ if (status == 0)
+ *data = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
+ IXGBE_EEPROM_READ_REG_DATA);
+ else
+ hw_dbg(hw, "Eeprom read timed out\n");
+
+ return status;
+}
+
+/**
+ * ixgbe_poll_eeprom_eerd_done - Poll EERD status
+ * @hw: pointer to hardware structure
+ *
+ * Polls the status bit (bit 1) of the EERD to determine when the read is done.
+ **/
+static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u32 reg;
+ s32 status = IXGBE_ERR_EEPROM;
+
+ for (i = 0; i < IXGBE_EERD_ATTEMPTS; i++) {
+ reg = IXGBE_READ_REG(hw, IXGBE_EERD);
+ if (reg & IXGBE_EEPROM_READ_REG_DONE) {
+ status = 0;
+ break;
+ }
+ udelay(5);
+ }
+ return status;
+}
+
+/**
+ * ixgbe_get_eeprom_semaphore - Get hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * Sets the hardware semaphores so EEPROM access can occur for bit-bang method
+ **/
+static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_EEPROM;
+ u32 timeout;
+ u32 i;
+ u32 swsm;
+
+ /* Set timeout value based on size of EEPROM */
+ timeout = hw->eeprom.word_size + 1;
+
+ /* Get SMBI software semaphore between device drivers first */
+ for (i = 0; i < timeout; i++) {
+ /*
+ * If the SMBI bit is 0 when we read it, then the bit will be
+ * set and we have the semaphore
+ */
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ if (!(swsm & IXGBE_SWSM_SMBI)) {
+ status = 0;
+ break;
+ }
+ msleep(1);
+ }
+
+ /* Now get the semaphore between SW/FW through the SWESMBI bit */
+ if (status == 0) {
+ for (i = 0; i < timeout; i++) {
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+
+ /* Set the SW EEPROM semaphore bit to request access */
+ swsm |= IXGBE_SWSM_SWESMBI;
+ IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+
+ /*
+ * If we set the bit successfully then we got the
+ * semaphore.
+ */
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ if (swsm & IXGBE_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ }
+
+ /*
+ * Release semaphores and return error if SW EEPROM semaphore
+ * was not granted because we don't have access to the EEPROM
+ */
+ if (i >= timeout) {
+ hw_dbg(hw, "Driver can't access the Eeprom - Semaphore "
+ "not granted.\n");
+ ixgbe_release_eeprom_semaphore(hw);
+ status = IXGBE_ERR_EEPROM;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_release_eeprom_semaphore - Release hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * This function clears hardware semaphore bits.
+ **/
+static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw)
+{
+ u32 swsm;
+
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+
+ /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */
+ swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI);
+ IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+}
+
+/**
+ * ixgbe_calc_eeprom_checksum - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ **/
+static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw)
+{
+ u16 i;
+ u16 j;
+ u16 checksum = 0;
+ u16 length = 0;
+ u16 pointer = 0;
+ u16 word = 0;
+
+ /* Include 0x0-0x3F in the checksum */
+ for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
+ if (ixgbe_read_eeprom(hw, i, &word) != 0) {
+ hw_dbg(hw, "EEPROM read failed\n");
+ break;
+ }
+ checksum += word;
+ }
+
+ /* Include all data from pointers except for the fw pointer */
+ for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
+ ixgbe_read_eeprom(hw, i, &pointer);
+
+ /* Make sure the pointer seems valid */
+ if (pointer != 0xFFFF && pointer != 0) {
+ ixgbe_read_eeprom(hw, pointer, &length);
+
+ if (length != 0xFFFF && length != 0) {
+ for (j = pointer+1; j <= pointer+length; j++) {
+ ixgbe_read_eeprom(hw, j, &word);
+ checksum += word;
+ }
+ }
+ }
+ }
+
+ checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+ return checksum;
+}
+
+/**
+ * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
+ *
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
+{
+ s32 status;
+ u16 checksum;
+ u16 read_checksum = 0;
+
+ /*
+ * Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = ixgbe_read_eeprom(hw, 0, &checksum);
+
+ if (status == 0) {
+ checksum = ixgbe_calc_eeprom_checksum(hw);
+
+ ixgbe_read_eeprom(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
+
+ /*
+ * Verify read checksum from EEPROM is the same as
+ * calculated checksum
+ */
+ if (read_checksum != checksum)
+ status = IXGBE_ERR_EEPROM_CHECKSUM;
+
+ /* If the user cares, return the calculated checksum */
+ if (checksum_val)
+ *checksum_val = checksum;
+ } else {
+ hw_dbg(hw, "EEPROM read failed\n");
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_validate_mac_addr - Validate MAC address
+ * @mac_addr: pointer to MAC address.
+ *
+ * Tests a MAC address to ensure it is a valid Individual Address
+ **/
+s32 ixgbe_validate_mac_addr(u8 *mac_addr)
+{
+ s32 status = 0;
+
+ /* Make sure it is not a multicast address */
+ if (IXGBE_IS_MULTICAST(mac_addr))
+ status = IXGBE_ERR_INVALID_MAC_ADDR;
+ /* Not a broadcast address */
+ else if (IXGBE_IS_BROADCAST(mac_addr))
+ status = IXGBE_ERR_INVALID_MAC_ADDR;
+ /* Reject the zero address */
+ else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
+ mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0)
+ status = IXGBE_ERR_INVALID_MAC_ADDR;
+
+ return status;
+}
+
+/**
+ * ixgbe_set_rar - Set RX address register
+ * @hw: pointer to hardware structure
+ * @addr: Address to put into receive address register
+ * @index: Receive address register to write
+ * @vind: Vind to set RAR to
+ * @enable_addr: set flag that address is active
+ *
+ * Puts an ethernet address into a receive address register.
+ **/
+s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind,
+ u32 enable_addr)
+{
+ u32 rar_low, rar_high;
+
+ /*
+ * HW expects these in little endian so we reverse the byte order from
+ * network order (big endian) to little endian
+ */
+ rar_low = ((u32)addr[0] |
+ ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) |
+ ((u32)addr[3] << 24));
+
+ rar_high = ((u32)addr[4] |
+ ((u32)addr[5] << 8) |
+ ((vind << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK));
+
+ if (enable_addr != 0)
+ rar_high |= IXGBE_RAH_AV;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+
+ return 0;
+}
+
+/**
+ * ixgbe_init_rx_addrs - Initializes receive address filters.
+ * @hw: pointer to hardware structure
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive addresss registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ **/
+static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u32 rar_entries = hw->mac.num_rx_addrs;
+
+ /*
+ * If the current mac address is valid, assume it is a software override
+ * to the permanent address.
+ * Otherwise, use the permanent address from the eeprom.
+ */
+ if (ixgbe_validate_mac_addr(hw->mac.addr) ==
+ IXGBE_ERR_INVALID_MAC_ADDR) {
+ /* Get the MAC address from the RAR0 for later reference */
+ ixgbe_get_mac_addr(hw, hw->mac.addr);
+
+ hw_dbg(hw, " Keeping Current RAR0 Addr =%.2X %.2X %.2X ",
+ hw->mac.addr[0], hw->mac.addr[1],
+ hw->mac.addr[2]);
+ hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3],
+ hw->mac.addr[4], hw->mac.addr[5]);
+ } else {
+ /* Setup the receive address. */
+ hw_dbg(hw, "Overriding MAC Address in RAR[0]\n");
+ hw_dbg(hw, " New MAC Addr =%.2X %.2X %.2X ",
+ hw->mac.addr[0], hw->mac.addr[1],
+ hw->mac.addr[2]);
+ hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3],
+ hw->mac.addr[4], hw->mac.addr[5]);
+
+ ixgbe_set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+ }
+
+ hw->addr_ctrl.rar_used_count = 1;
+
+ /* Zero out the other receive addresses. */
+ hw_dbg(hw, "Clearing RAR[1-15]\n");
+ for (i = 1; i < rar_entries; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
+ }
+
+ /* Clear the MTA */
+ hw->addr_ctrl.mc_addr_in_rar_count = 0;
+ hw->addr_ctrl.mta_in_use = 0;
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
+
+ hw_dbg(hw, " Clearing MTA\n");
+ for (i = 0; i < IXGBE_MC_TBL_SIZE; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
+
+ return 0;
+}
+
+/**
+ * ixgbe_mta_vector - Determines bit-vector in multicast table to set
+ * @hw: pointer to hardware structure
+ * @mc_addr: the multicast address
+ *
+ * Extracts the 12 bits, from a multicast address, to determine which
+ * bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ * incoming rx multicast addresses, to determine the bit-vector to check in
+ * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ * by the MO field of the MCSTCTRL. The MO field is set during initalization
+ * to mc_filter_type.
+ **/
+static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+ u32 vector = 0;
+
+ switch (hw->mac.mc_filter_type) {
+ case 0: /* use bits [47:36] of the address */
+ vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+ break;
+ case 1: /* use bits [46:35] of the address */
+ vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+ break;
+ case 2: /* use bits [45:34] of the address */
+ vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+ break;
+ case 3: /* use bits [43:32] of the address */
+ vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+ break;
+ default: /* Invalid mc_filter_type */
+ hw_dbg(hw, "MC filter type param set incorrectly\n");
+ break;
+ }
+
+ /* vector can only be 12-bits or boundary will be exceeded */
+ vector &= 0xFFF;
+ return vector;
+}
+
+/**
+ * ixgbe_set_mta - Set bit-vector in multicast table
+ * @hw: pointer to hardware structure
+ * @hash_value: Multicast address hash value
+ *
+ * Sets the bit-vector in the multicast table.
+ **/
+static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+ u32 vector;
+ u32 vector_bit;
+ u32 vector_reg;
+ u32 mta_reg;
+
+ hw->addr_ctrl.mta_in_use++;
+
+ vector = ixgbe_mta_vector(hw, mc_addr);
+ hw_dbg(hw, " bit-vector = 0x%03X\n", vector);
+
+ /*
+ * The MTA is a register array of 128 32-bit registers. It is treated
+ * like an array of 4096 bits. We want to set bit
+ * BitArray[vector_value]. So we figure out what register the bit is
+ * in, read it, OR in the new bit, then write back the new value. The
+ * register is determined by the upper 7 bits of the vector value and
+ * the bit within that register are determined by the lower 5 bits of
+ * the value.
+ */
+ vector_reg = (vector >> 5) & 0x7F;
+ vector_bit = vector & 0x1F;
+ mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
+ mta_reg |= (1 << vector_bit);
+ IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
+}
+
+/**
+ * ixgbe_add_mc_addr - Adds a multicast address.
+ * @hw: pointer to hardware structure
+ * @mc_addr: new multicast address
+ *
+ * Adds it to unused receive address register or to the multicast table.
+ **/
+static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+ u32 rar_entries = hw->mac.num_rx_addrs;
+
+ hw_dbg(hw, " MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n",
+ mc_addr[0], mc_addr[1], mc_addr[2],
+ mc_addr[3], mc_addr[4], mc_addr[5]);
+
+ /*
+ * Place this multicast address in the RAR if there is room,
+ * else put it in the MTA
+ */
+ if (hw->addr_ctrl.rar_used_count < rar_entries) {
+ ixgbe_set_rar(hw, hw->addr_ctrl.rar_used_count,
+ mc_addr, 0, IXGBE_RAH_AV);
+ hw_dbg(hw, "Added a multicast address to RAR[%d]\n",
+ hw->addr_ctrl.rar_used_count);
+ hw->addr_ctrl.rar_used_count++;
+ hw->addr_ctrl.mc_addr_in_rar_count++;
+ } else {
+ ixgbe_set_mta(hw, mc_addr);
+ }
+
+ hw_dbg(hw, "ixgbe_add_mc_addr Complete\n");
+}
+
+/**
+ * ixgbe_update_mc_addr_list - Updates MAC list of multicast addresses
+ * @hw: pointer to hardware structure
+ * @mc_addr_list: the list of new multicast addresses
+ * @mc_addr_count: number of addresses
+ * @pad: number of bytes between addresses in the list
+ *
+ * The given list replaces any existing list. Clears the MC addrs from receive
+ * address registers and the multicast table. Uses unsed receive address
+ * registers for the first multicast addresses, and hashes the rest into the
+ * multicast table.
+ **/
+s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count, u32 pad)
+{
+ u32 i;
+ u32 rar_entries = hw->mac.num_rx_addrs;
+
+ /*
+ * Set the new number of MC addresses that we are being requested to
+ * use.
+ */
+ hw->addr_ctrl.num_mc_addrs = mc_addr_count;
+ hw->addr_ctrl.rar_used_count -= hw->addr_ctrl.mc_addr_in_rar_count;
+ hw->addr_ctrl.mc_addr_in_rar_count = 0;
+ hw->addr_ctrl.mta_in_use = 0;
+
+ /* Zero out the other receive addresses. */
+ hw_dbg(hw, "Clearing RAR[1-15]\n");
+ for (i = hw->addr_ctrl.rar_used_count; i < rar_entries; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
+ }
+
+ /* Clear the MTA */
+ hw_dbg(hw, " Clearing MTA\n");
+ for (i = 0; i < IXGBE_MC_TBL_SIZE; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
+
+ /* Add the new addresses */
+ for (i = 0; i < mc_addr_count; i++) {
+ hw_dbg(hw, " Adding the multicast addresses:\n");
+ ixgbe_add_mc_addr(hw, mc_addr_list +
+ (i * (IXGBE_ETH_LENGTH_OF_ADDRESS + pad)));
+ }
+
+ /* Enable mta */
+ if (hw->addr_ctrl.mta_in_use > 0)
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL,
+ IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type);
+
+ hw_dbg(hw, "ixgbe_update_mc_addr_list Complete\n");
+ return 0;
+}
+
+/**
+ * ixgbe_clear_vfta - Clear VLAN filter table
+ * @hw: pointer to hardware structure
+ *
+ * Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
+{
+ u32 offset;
+ u32 vlanbyte;
+
+ for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+ for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
+ for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
+ 0);
+
+ return 0;
+}
+
+/**
+ * ixgbe_set_vfta - Set VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFTA
+ * @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ *
+ * Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on)
+{
+ u32 VftaIndex;
+ u32 BitOffset;
+ u32 VftaReg;
+ u32 VftaByte;
+
+ /* Determine 32-bit word position in array */
+ VftaIndex = (vlan >> 5) & 0x7F; /* upper seven bits */
+
+ /* Determine the location of the (VMD) queue index */
+ VftaByte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
+ BitOffset = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */
+
+ /* Set the nibble for VMD queue index */
+ VftaReg = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(VftaByte, VftaIndex));
+ VftaReg &= (~(0x0F << BitOffset));
+ VftaReg |= (vind << BitOffset);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(VftaByte, VftaIndex), VftaReg);
+
+ /* Determine the location of the bit for this VLAN id */
+ BitOffset = vlan & 0x1F; /* lower five bits */
+
+ VftaReg = IXGBE_READ_REG(hw, IXGBE_VFTA(VftaIndex));
+ if (vlan_on)
+ /* Turn on this VLAN id */
+ VftaReg |= (1 << BitOffset);
+ else
+ /* Turn off this VLAN id */
+ VftaReg &= ~(1 << BitOffset);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(VftaIndex), VftaReg);
+
+ return 0;
+}
+
+/**
+ * ixgbe_setup_fc - Configure flow control settings
+ * @hw: pointer to hardware structure
+ * @packetbuf_num: packet buffer number (0-7)
+ *
+ * Configures the flow control settings based on SW configuration.
+ * This function is used for 802.3x flow control configuration only.
+ **/
+s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
+{
+ u32 frctl_reg;
+ u32 rmcs_reg;
+
+ if (packetbuf_num < 0 || packetbuf_num > 7)
+ hw_dbg(hw, "Invalid packet buffer number [%d], expected range"
+ "is 0-7\n", packetbuf_num);
+
+ frctl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ frctl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
+
+ rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+ rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
+
+ /*
+ * We want to save off the original Flow Control configuration just in
+ * case we get disconnected and then reconnected into a different hub
+ * or switch with different Flow Control capabilities.
+ */
+ hw->fc.type = hw->fc.original_type;
+
+ /*
+ * The possible values of the "flow_control" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames but not
+ * send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but we do not
+ * support receiving pause frames)
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: Invalid.
+ */
+ switch (hw->fc.type) {
+ case ixgbe_fc_none:
+ break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * RX Flow control is enabled,
+ * and TX Flow control is disabled.
+ */
+ frctl_reg |= IXGBE_FCTRL_RFCE;
+ break;
+ case ixgbe_fc_tx_pause:
+ /*
+ * TX Flow control is enabled, and RX Flow control is disabled,
+ * by a software over-ride.
+ */
+ rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+ break;
+ case ixgbe_fc_full:
+ /*
+ * Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ frctl_reg |= IXGBE_FCTRL_RFCE;
+ rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+ break;
+ default:
+ /* We should never get here. The value should be 0-3. */
+ hw_dbg(hw, "Flow control param set incorrectly\n");
+ break;
+ }
+
+ /* Enable 802.3x based flow control settings. */
+ IXGBE_WRITE_REG(hw, IXGBE_FCTRL, frctl_reg);
+ IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
+
+ /*
+ * We need to set up the Receive Threshold high and low water
+ * marks as well as (optionally) enabling the transmission of
+ * XON frames.
+ */
+ if (hw->fc.type & ixgbe_fc_tx_pause) {
+ if (hw->fc.send_xon) {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
+ (hw->fc.low_water | IXGBE_FCRTL_XONE));
+ } else {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
+ hw->fc.low_water);
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num),
+ (hw->fc.high_water)|IXGBE_FCRTH_FCEN);
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(0), hw->fc.pause_time);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
+
+ return 0;
+}
+
+/**
+ * ixgbe_disable_pcie_master - Disable PCI-express master access
+ * @hw: pointer to hardware structure
+ *
+ * Disables PCI-Express master access and verifies there are no pending
+ * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable
+ * bit hasn't caused the master requests to be disabled, else 0
+ * is returned signifying master requests disabled.
+ **/
+s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
+{
+ u32 ctrl;
+ s32 i;
+ s32 status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
+
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ ctrl |= IXGBE_CTRL_GIO_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+
+ for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
+ if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) {
+ status = 0;
+ break;
+ }
+ udelay(100);
+ }
+
+ return status;
+}
+
+
+/**
+ * ixgbe_acquire_swfw_sync - Aquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify wich semaphore to acquire
+ *
+ * Aquires the SWFW semaphore throught the GSSR register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
+{
+ u32 gssr;
+ u32 swmask = mask;
+ u32 fwmask = mask << 5;
+ s32 timeout = 200;
+
+ while (timeout) {
+ if (ixgbe_get_eeprom_semaphore(hw))
+ return -IXGBE_ERR_SWFW_SYNC;
+
+ gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
+ if (!(gssr & (fwmask | swmask)))
+ break;
+
+ /*
+ * Firmware currently using resource (fwmask) or other software
+ * thread currently using resource (swmask)
+ */
+ ixgbe_release_eeprom_semaphore(hw);
+ msleep(5);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg(hw, "Driver can't access resource, GSSR timeout.\n");
+ return -IXGBE_ERR_SWFW_SYNC;
+ }
+
+ gssr |= swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+
+ ixgbe_release_eeprom_semaphore(hw);
+ return 0;
+}
+
+/**
+ * ixgbe_release_swfw_sync - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify wich semaphore to release
+ *
+ * Releases the SWFW semaphore throught the GSSR register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask)
+{
+ u32 gssr;
+ u32 swmask = mask;
+
+ ixgbe_get_eeprom_semaphore(hw);
+
+ gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
+ gssr &= ~swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+
+ ixgbe_release_eeprom_semaphore(hw);
+}
+
+/**
+ * ixgbe_read_analog_reg8- Reads 8 bit 82598 Atlas analog register
+ * @hw: pointer to hardware structure
+ * @reg: analog register to read
+ * @val: read value
+ *
+ * Performs write operation to analog register specified.
+ **/
+s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+ u32 atlas_ctl;
+
+ IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
+ IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(10);
+ atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
+ *val = (u8)atlas_ctl;
+
+ return 0;
+}
+
+/**
+ * ixgbe_write_analog_reg8- Writes 8 bit Atlas analog register
+ * @hw: pointer to hardware structure
+ * @reg: atlas register to write
+ * @val: value to write
+ *
+ * Performs write operation to Atlas analog register specified.
+ **/
+s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+ u32 atlas_ctl;
+
+ atlas_ctl = (reg << 8) | val;
+ IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(10);
+
+ return 0;
+}
+
OpenPOWER on IntegriCloud