summaryrefslogtreecommitdiffstats
path: root/drivers/net/igb/igb_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/igb/igb_main.c')
-rw-r--r--drivers/net/igb/igb_main.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 3d850af..0dfd1b9 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -200,7 +200,7 @@ static struct pci_driver igb_driver = {
.probe = igb_probe,
.remove = __devexit_p(igb_remove),
#ifdef CONFIG_PM
- /* Power Managment Hooks */
+ /* Power Management Hooks */
.suspend = igb_suspend,
.resume = igb_resume,
#endif
@@ -2292,7 +2292,7 @@ static void igb_init_hw_timer(struct igb_adapter *adapter)
/**
* Scale the NIC clock cycle by a large factor so that
* relatively small clock corrections can be added or
- * substracted at each clock tick. The drawbacks of a large
+ * subtracted at each clock tick. The drawbacks of a large
* factor are a) that the clock register overflows more quickly
* (not such a big deal) and b) that the increment per tick has
* to fit into 24 bits. As a result we need to use a shift of
@@ -3409,7 +3409,7 @@ static void igb_set_rx_mode(struct net_device *netdev)
} else {
/*
* Write addresses to the MTA, if the attempt fails
- * then we should just turn on promiscous mode so
+ * then we should just turn on promiscuous mode so
* that we can at least receive multicast traffic
*/
count = igb_write_mc_addr_list(netdev);
@@ -3423,7 +3423,7 @@ static void igb_set_rx_mode(struct net_device *netdev)
/*
* Write addresses to available RAR registers, if there is not
* sufficient space to store all the addresses then enable
- * unicast promiscous mode
+ * unicast promiscuous mode
*/
count = igb_write_uc_addr_list(netdev);
if (count < 0) {
@@ -4317,7 +4317,7 @@ netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,
/*
* count reflects descriptors mapped, if 0 or less then mapping error
- * has occured and we need to rewind the descriptor queue
+ * has occurred and we need to rewind the descriptor queue
*/
count = igb_tx_map_adv(tx_ring, skb, first);
if (!count) {
@@ -5352,8 +5352,8 @@ static void igb_msg_task(struct igb_adapter *adapter)
* The unicast table address is a register array of 32-bit registers.
* The table is meant to be used in a way similar to how the MTA is used
* however due to certain limitations in the hardware it is necessary to
- * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscous
- * enable bit to allow vlan tag stripping when promiscous mode is enabled
+ * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
+ * enable bit to allow vlan tag stripping when promiscuous mode is enabled
**/
static void igb_set_uta(struct igb_adapter *adapter)
{
OpenPOWER on IntegriCloud