summaryrefslogtreecommitdiffstats
path: root/drivers/net/ieee802154/mrf24j40.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ieee802154/mrf24j40.c')
-rw-r--r--drivers/net/ieee802154/mrf24j40.c104
1 files changed, 64 insertions, 40 deletions
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index 07e0b88..a200fa1 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -13,18 +13,14 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
#include <linux/module.h>
-#include <net/wpan-phy.h>
+#include <linux/ieee802154.h>
+#include <net/cfg802154.h>
#include <net/mac802154.h>
-#include <net/ieee802154.h>
/* MRF24J40 Short Address Registers */
#define REG_RXMCR 0x00 /* Receive MAC control */
@@ -43,6 +39,8 @@
#define REG_TXSTBL 0x2E /* TX Stabilization */
#define REG_INTSTAT 0x31 /* Interrupt Status */
#define REG_INTCON 0x32 /* Interrupt Control */
+#define REG_GPIO 0x33 /* GPIO */
+#define REG_TRISGPIO 0x34 /* GPIO direction */
#define REG_RFCTL 0x36 /* RF Control Mode Register */
#define REG_BBREG1 0x39 /* Baseband Registers */
#define REG_BBREG2 0x3A /* */
@@ -63,6 +61,7 @@
#define REG_SLPCON1 0x220
#define REG_WAKETIMEL 0x222 /* Wake-up Time Match Value Low */
#define REG_WAKETIMEH 0x223 /* Wake-up Time Match Value High */
+#define REG_TESTMODE 0x22F /* Test mode */
#define REG_RX_FIFO 0x300 /* Receive FIFO */
/* Device configuration: Only channels 11-26 on page 0 are supported. */
@@ -75,10 +74,12 @@
#define RX_FIFO_SIZE 144 /* From datasheet */
#define SET_CHANNEL_DELAY_US 192 /* From datasheet */
+enum mrf24j40_modules { MRF24J40, MRF24J40MA, MRF24J40MC };
+
/* Device Private Data */
struct mrf24j40 {
struct spi_device *spi;
- struct ieee802154_dev *dev;
+ struct ieee802154_hw *hw;
struct mutex buffer_mutex; /* only used to protect buf */
struct completion tx_complete;
@@ -331,9 +332,9 @@ out:
return ret;
}
-static int mrf24j40_tx(struct ieee802154_dev *dev, struct sk_buff *skb)
+static int mrf24j40_tx(struct ieee802154_hw *hw, struct sk_buff *skb)
{
- struct mrf24j40 *devrec = dev->priv;
+ struct mrf24j40 *devrec = hw->priv;
u8 val;
int ret = 0;
@@ -382,7 +383,7 @@ err:
return ret;
}
-static int mrf24j40_ed(struct ieee802154_dev *dev, u8 *level)
+static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level)
{
/* TODO: */
pr_warn("mrf24j40: ed not implemented\n");
@@ -390,9 +391,9 @@ static int mrf24j40_ed(struct ieee802154_dev *dev, u8 *level)
return 0;
}
-static int mrf24j40_start(struct ieee802154_dev *dev)
+static int mrf24j40_start(struct ieee802154_hw *hw)
{
- struct mrf24j40 *devrec = dev->priv;
+ struct mrf24j40 *devrec = hw->priv;
u8 val;
int ret;
@@ -407,9 +408,9 @@ static int mrf24j40_start(struct ieee802154_dev *dev)
return 0;
}
-static void mrf24j40_stop(struct ieee802154_dev *dev)
+static void mrf24j40_stop(struct ieee802154_hw *hw)
{
- struct mrf24j40 *devrec = dev->priv;
+ struct mrf24j40 *devrec = hw->priv;
u8 val;
int ret;
@@ -422,10 +423,9 @@ static void mrf24j40_stop(struct ieee802154_dev *dev)
write_short_reg(devrec, REG_INTCON, val);
}
-static int mrf24j40_set_channel(struct ieee802154_dev *dev,
- int page, int channel)
+static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
{
- struct mrf24j40 *devrec = dev->priv;
+ struct mrf24j40 *devrec = hw->priv;
u8 val;
int ret;
@@ -453,15 +453,15 @@ static int mrf24j40_set_channel(struct ieee802154_dev *dev,
return 0;
}
-static int mrf24j40_filter(struct ieee802154_dev *dev,
+static int mrf24j40_filter(struct ieee802154_hw *hw,
struct ieee802154_hw_addr_filt *filt,
unsigned long changed)
{
- struct mrf24j40 *devrec = dev->priv;
+ struct mrf24j40 *devrec = hw->priv;
dev_dbg(printdev(devrec), "filter\n");
- if (changed & IEEE802515_AFILT_SADDR_CHANGED) {
+ if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
/* Short Addr */
u8 addrh, addrl;
@@ -474,7 +474,7 @@ static int mrf24j40_filter(struct ieee802154_dev *dev,
"Set short addr to %04hx\n", filt->short_addr);
}
- if (changed & IEEE802515_AFILT_IEEEADDR_CHANGED) {
+ if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
/* Device Address */
u8 i, addr[8];
@@ -490,7 +490,7 @@ static int mrf24j40_filter(struct ieee802154_dev *dev,
#endif
}
- if (changed & IEEE802515_AFILT_PANID_CHANGED) {
+ if (changed & IEEE802154_AFILT_PANID_CHANGED) {
/* PAN ID */
u8 panidl, panidh;
@@ -502,7 +502,7 @@ static int mrf24j40_filter(struct ieee802154_dev *dev,
dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id);
}
- if (changed & IEEE802515_AFILT_PANC_CHANGED) {
+ if (changed & IEEE802154_AFILT_PANC_CHANGED) {
/* Pan Coordinator */
u8 val;
int ret;
@@ -543,7 +543,7 @@ static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
val |= 4; /* SET RXDECINV */
write_short_reg(devrec, REG_BBREG1, val);
- skb = alloc_skb(len, GFP_KERNEL);
+ skb = dev_alloc_skb(len);
if (!skb) {
ret = -ENOMEM;
goto out;
@@ -563,7 +563,7 @@ static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
/* TODO: Other drivers call ieee20154_rx_irqsafe() here (eg: cc2040,
* also from a workqueue). I think irqsafe is not necessary here.
* Can someone confirm? */
- ieee802154_rx_irqsafe(devrec->dev, skb, lqi);
+ ieee802154_rx_irqsafe(devrec->hw, skb, lqi);
dev_dbg(printdev(devrec), "RX Handled\n");
@@ -578,9 +578,9 @@ out:
return ret;
}
-static struct ieee802154_ops mrf24j40_ops = {
+static const struct ieee802154_ops mrf24j40_ops = {
.owner = THIS_MODULE,
- .xmit = mrf24j40_tx,
+ .xmit_sync = mrf24j40_tx,
.ed = mrf24j40_ed,
.start = mrf24j40_start,
.stop = mrf24j40_stop,
@@ -691,6 +691,28 @@ static int mrf24j40_hw_init(struct mrf24j40 *devrec)
if (ret)
goto err_ret;
+ if (spi_get_device_id(devrec->spi)->driver_data == MRF24J40MC) {
+ /* Enable external amplifier.
+ * From MRF24J40MC datasheet section 1.3: Operation.
+ */
+ read_long_reg(devrec, REG_TESTMODE, &val);
+ val |= 0x7; /* Configure GPIO 0-2 to control amplifier */
+ write_long_reg(devrec, REG_TESTMODE, val);
+
+ read_short_reg(devrec, REG_TRISGPIO, &val);
+ val |= 0x8; /* Set GPIO3 as output. */
+ write_short_reg(devrec, REG_TRISGPIO, val);
+
+ read_short_reg(devrec, REG_GPIO, &val);
+ val |= 0x8; /* Set GPIO3 HIGH to enable U5 voltage regulator */
+ write_short_reg(devrec, REG_GPIO, val);
+
+ /* Reduce TX pwr to meet FCC requirements.
+ * From MRF24J40MC datasheet section 3.1.1
+ */
+ write_long_reg(devrec, REG_RFCON3, 0x28);
+ }
+
return 0;
err_ret:
@@ -722,17 +744,18 @@ static int mrf24j40_probe(struct spi_device *spi)
/* Register with the 802154 subsystem */
- devrec->dev = ieee802154_alloc_device(0, &mrf24j40_ops);
- if (!devrec->dev)
+ devrec->hw = ieee802154_alloc_hw(0, &mrf24j40_ops);
+ if (!devrec->hw)
goto err_ret;
- devrec->dev->priv = devrec;
- devrec->dev->parent = &devrec->spi->dev;
- devrec->dev->phy->channels_supported[0] = CHANNEL_MASK;
- devrec->dev->flags = IEEE802154_HW_OMIT_CKSUM|IEEE802154_HW_AACK;
+ devrec->hw->priv = devrec;
+ devrec->hw->parent = &devrec->spi->dev;
+ devrec->hw->phy->channels_supported[0] = CHANNEL_MASK;
+ devrec->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
+ IEEE802154_HW_AFILT;
dev_dbg(printdev(devrec), "registered mrf24j40\n");
- ret = ieee802154_register_device(devrec->dev);
+ ret = ieee802154_register_hw(devrec->hw);
if (ret)
goto err_register_device;
@@ -757,9 +780,9 @@ static int mrf24j40_probe(struct spi_device *spi)
err_irq:
err_hw_init:
- ieee802154_unregister_device(devrec->dev);
+ ieee802154_unregister_hw(devrec->hw);
err_register_device:
- ieee802154_free_device(devrec->dev);
+ ieee802154_free_hw(devrec->hw);
err_ret:
return ret;
}
@@ -770,8 +793,8 @@ static int mrf24j40_remove(struct spi_device *spi)
dev_dbg(printdev(devrec), "remove\n");
- ieee802154_unregister_device(devrec->dev);
- ieee802154_free_device(devrec->dev);
+ ieee802154_unregister_hw(devrec->hw);
+ ieee802154_free_hw(devrec->hw);
/* TODO: Will ieee802154_free_device() wait until ->xmit() is
* complete? */
@@ -779,8 +802,9 @@ static int mrf24j40_remove(struct spi_device *spi)
}
static const struct spi_device_id mrf24j40_ids[] = {
- { "mrf24j40", 0 },
- { "mrf24j40ma", 0 },
+ { "mrf24j40", MRF24J40 },
+ { "mrf24j40ma", MRF24J40MA },
+ { "mrf24j40mc", MRF24J40MC },
{ },
};
MODULE_DEVICE_TABLE(spi, mrf24j40_ids);
OpenPOWER on IntegriCloud