diff options
Diffstat (limited to 'drivers/net/gianfar_phy.c')
| -rw-r--r-- | drivers/net/gianfar_phy.c | 661 |
1 files changed, 0 insertions, 661 deletions
diff --git a/drivers/net/gianfar_phy.c b/drivers/net/gianfar_phy.c deleted file mode 100644 index 7c965f2..0000000 --- a/drivers/net/gianfar_phy.c +++ /dev/null @@ -1,661 +0,0 @@ -/* - * drivers/net/gianfar_phy.c - * - * Gianfar Ethernet Driver -- PHY handling - * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560 - * Based on 8260_io/fcc_enet.c - * - * Author: Andy Fleming - * Maintainer: Kumar Gala (kumar.gala@freescale.com) - * - * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/spinlock.h> -#include <linux/mm.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <linux/module.h> -#include <linux/version.h> -#include <linux/crc32.h> -#include <linux/mii.h> - -#include "gianfar.h" -#include "gianfar_phy.h" - -static void config_genmii_advert(struct gfar_mii_info *mii_info); -static void genmii_setup_forced(struct gfar_mii_info *mii_info); -static void genmii_restart_aneg(struct gfar_mii_info *mii_info); -static int gbit_config_aneg(struct gfar_mii_info *mii_info); -static int genmii_config_aneg(struct gfar_mii_info *mii_info); -static int genmii_update_link(struct gfar_mii_info *mii_info); -static int genmii_read_status(struct gfar_mii_info *mii_info); -u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum); -void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val); - -/* Write value to the PHY for this device to the register at regnum, */ -/* waiting until the write is done before it returns. All PHY */ -/* configuration has to be done through the TSEC1 MIIM regs */ -void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value) -{ - struct gfar_private *priv = netdev_priv(dev); - struct gfar *regbase = priv->phyregs; - - /* Set the PHY address and the register address we want to write */ - gfar_write(®base->miimadd, (mii_id << 8) | regnum); - - /* Write out the value we want */ - gfar_write(®base->miimcon, value); - - /* Wait for the transaction to finish */ - while (gfar_read(®base->miimind) & MIIMIND_BUSY) - cpu_relax(); -} - -/* Reads from register regnum in the PHY for device dev, */ -/* returning the value. Clears miimcom first. All PHY */ -/* configuration has to be done through the TSEC1 MIIM regs */ -int read_phy_reg(struct net_device *dev, int mii_id, int regnum) -{ - struct gfar_private *priv = netdev_priv(dev); - struct gfar *regbase = priv->phyregs; - u16 value; - - /* Set the PHY address and the register address we want to read */ - gfar_write(®base->miimadd, (mii_id << 8) | regnum); - - /* Clear miimcom, and then initiate a read */ - gfar_write(®base->miimcom, 0); - gfar_write(®base->miimcom, MII_READ_COMMAND); - - /* Wait for the transaction to finish */ - while (gfar_read(®base->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)) - cpu_relax(); - - /* Grab the value of the register from miimstat */ - value = gfar_read(®base->miimstat); - - return value; -} - -void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info) -{ - if(mii_info->phyinfo->ack_interrupt) - mii_info->phyinfo->ack_interrupt(mii_info); -} - - -void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts) -{ - mii_info->interrupts = interrupts; - if(mii_info->phyinfo->config_intr) - mii_info->phyinfo->config_intr(mii_info); -} - - -/* Writes MII_ADVERTISE with the appropriate values, after - * sanitizing advertise to make sure only supported features - * are advertised - */ -static void config_genmii_advert(struct gfar_mii_info *mii_info) -{ - u32 advertise; - u16 adv; - - /* Only allow advertising what this PHY supports */ - mii_info->advertising &= mii_info->phyinfo->features; - advertise = mii_info->advertising; - - /* Setup standard advertisement */ - adv = phy_read(mii_info, MII_ADVERTISE); - adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); - if (advertise & ADVERTISED_10baseT_Half) - adv |= ADVERTISE_10HALF; - if (advertise & ADVERTISED_10baseT_Full) - adv |= ADVERTISE_10FULL; - if (advertise & ADVERTISED_100baseT_Half) - adv |= ADVERTISE_100HALF; - if (advertise & ADVERTISED_100baseT_Full) - adv |= ADVERTISE_100FULL; - phy_write(mii_info, MII_ADVERTISE, adv); -} - -static void genmii_setup_forced(struct gfar_mii_info *mii_info) -{ - u16 ctrl; - u32 features = mii_info->phyinfo->features; - - ctrl = phy_read(mii_info, MII_BMCR); - - ctrl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPEED1000|BMCR_ANENABLE); - ctrl |= BMCR_RESET; - - switch(mii_info->speed) { - case SPEED_1000: - if(features & (SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full)) { - ctrl |= BMCR_SPEED1000; - break; - } - mii_info->speed = SPEED_100; - case SPEED_100: - if (features & (SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full)) { - ctrl |= BMCR_SPEED100; - break; - } - mii_info->speed = SPEED_10; - case SPEED_10: - if (features & (SUPPORTED_10baseT_Half - | SUPPORTED_10baseT_Full)) - break; - default: /* Unsupported speed! */ - printk(KERN_ERR "%s: Bad speed!\n", - mii_info->dev->name); - break; - } - - phy_write(mii_info, MII_BMCR, ctrl); -} - - -/* Enable and Restart Autonegotiation */ -static void genmii_restart_aneg(struct gfar_mii_info *mii_info) -{ - u16 ctl; - - ctl = phy_read(mii_info, MII_BMCR); - ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); - phy_write(mii_info, MII_BMCR, ctl); -} - - -static int gbit_config_aneg(struct gfar_mii_info *mii_info) -{ - u16 adv; - u32 advertise; - - if(mii_info->autoneg) { - /* Configure the ADVERTISE register */ - config_genmii_advert(mii_info); - advertise = mii_info->advertising; - - adv = phy_read(mii_info, MII_1000BASETCONTROL); - adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP | - MII_1000BASETCONTROL_HALFDUPLEXCAP); - if (advertise & SUPPORTED_1000baseT_Half) - adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP; - if (advertise & SUPPORTED_1000baseT_Full) - adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP; - phy_write(mii_info, MII_1000BASETCONTROL, adv); - - /* Start/Restart aneg */ - genmii_restart_aneg(mii_info); - } else - genmii_setup_forced(mii_info); - - return 0; -} - -static int marvell_config_aneg(struct gfar_mii_info *mii_info) -{ - /* The Marvell PHY has an errata which requires - * that certain registers get written in order - * to restart autonegotiation */ - phy_write(mii_info, MII_BMCR, BMCR_RESET); - - phy_write(mii_info, 0x1d, 0x1f); - phy_write(mii_info, 0x1e, 0x200c); - phy_write(mii_info, 0x1d, 0x5); - phy_write(mii_info, 0x1e, 0); - phy_write(mii_info, 0x1e, 0x100); - - gbit_config_aneg(mii_info); - - return 0; -} -static int genmii_config_aneg(struct gfar_mii_info *mii_info) -{ - if (mii_info->autoneg) { - config_genmii_advert(mii_info); - genmii_restart_aneg(mii_info); - } else - genmii_setup_forced(mii_info); - - return 0; -} - - -static int genmii_update_link(struct gfar_mii_info *mii_info) -{ - u16 status; - - /* Do a fake read */ - phy_read(mii_info, MII_BMSR); - - /* Read link and autonegotiation status */ - status = phy_read(mii_info, MII_BMSR); - if ((status & BMSR_LSTATUS) == 0) - mii_info->link = 0; - else - mii_info->link = 1; - - /* If we are autonegotiating, and not done, - * return an error */ - if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE)) - return -EAGAIN; - - return 0; -} - -static int genmii_read_status(struct gfar_mii_info *mii_info) -{ - u16 status; - int err; - - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; - - if (mii_info->autoneg) { - status = phy_read(mii_info, MII_LPA); - - if (status & (LPA_10FULL | LPA_100FULL)) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - if (status & (LPA_100FULL | LPA_100HALF)) - mii_info->speed = SPEED_100; - else - mii_info->speed = SPEED_10; - mii_info->pause = 0; - } - /* On non-aneg, we assume what we put in BMCR is the speed, - * though magic-aneg shouldn't prevent this case from occurring - */ - - return 0; -} -static int marvell_read_status(struct gfar_mii_info *mii_info) -{ - u16 status; - int err; - - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; - - /* If the link is up, read the speed and duplex */ - /* If we aren't autonegotiating, assume speeds - * are as set */ - if (mii_info->autoneg && mii_info->link) { - int speed; - status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS); - -#if 0 - /* If speed and duplex aren't resolved, - * return an error. Isn't this handled - * by checking aneg? - */ - if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0) - return -EAGAIN; -#endif - - /* Get the duplexity */ - if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - - /* Get the speed */ - speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK; - switch(speed) { - case MII_M1011_PHY_SPEC_STATUS_1000: - mii_info->speed = SPEED_1000; - break; - case MII_M1011_PHY_SPEC_STATUS_100: - mii_info->speed = SPEED_100; - break; - default: - mii_info->speed = SPEED_10; - break; - } - mii_info->pause = 0; - } - - return 0; -} - - -static int cis820x_read_status(struct gfar_mii_info *mii_info) -{ - u16 status; - int err; - - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; - - /* If the link is up, read the speed and duplex */ - /* If we aren't autonegotiating, assume speeds - * are as set */ - if (mii_info->autoneg && mii_info->link) { - int speed; - - status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT); - if (status & MII_CIS8201_AUXCONSTAT_DUPLEX) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - - speed = status & MII_CIS8201_AUXCONSTAT_SPEED; - - switch (speed) { - case MII_CIS8201_AUXCONSTAT_GBIT: - mii_info->speed = SPEED_1000; - break; - case MII_CIS8201_AUXCONSTAT_100: - mii_info->speed = SPEED_100; - break; - default: - mii_info->speed = SPEED_10; - break; - } - } - - return 0; -} - -static int marvell_ack_interrupt(struct gfar_mii_info *mii_info) -{ - /* Clear the interrupts by reading the reg */ - phy_read(mii_info, MII_M1011_IEVENT); - - return 0; -} - -static int marvell_config_intr(struct gfar_mii_info *mii_info) -{ - if(mii_info->interrupts == MII_INTERRUPT_ENABLED) - phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); - else - phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); - - return 0; -} - -static int cis820x_init(struct gfar_mii_info *mii_info) -{ - phy_write(mii_info, MII_CIS8201_AUX_CONSTAT, - MII_CIS8201_AUXCONSTAT_INIT); - phy_write(mii_info, MII_CIS8201_EXT_CON1, - MII_CIS8201_EXTCON1_INIT); - - return 0; -} - -static int cis820x_ack_interrupt(struct gfar_mii_info *mii_info) -{ - phy_read(mii_info, MII_CIS8201_ISTAT); - - return 0; -} - -static int cis820x_config_intr(struct gfar_mii_info *mii_info) -{ - if(mii_info->interrupts == MII_INTERRUPT_ENABLED) - phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK); - else - phy_write(mii_info, MII_CIS8201_IMASK, 0); - - return 0; -} - -#define DM9161_DELAY 10 - -static int dm9161_read_status(struct gfar_mii_info *mii_info) -{ - u16 status; - int err; - - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; - - /* If the link is up, read the speed and duplex */ - /* If we aren't autonegotiating, assume speeds - * are as set */ - if (mii_info->autoneg && mii_info->link) { - status = phy_read(mii_info, MII_DM9161_SCSR); - if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) - mii_info->speed = SPEED_100; - else - mii_info->speed = SPEED_10; - - if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F)) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - } - - return 0; -} - - -static int dm9161_config_aneg(struct gfar_mii_info *mii_info) -{ - struct dm9161_private *priv = mii_info->priv; - - if(0 == priv->resetdone) - return -EAGAIN; - - return 0; -} - -static void dm9161_timer(unsigned long data) -{ - struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data; - struct dm9161_private *priv = mii_info->priv; - u16 status = phy_read(mii_info, MII_BMSR); - - if (status & BMSR_ANEGCOMPLETE) { - priv->resetdone = 1; - } else - mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); -} - -static int dm9161_init(struct gfar_mii_info *mii_info) -{ - struct dm9161_private *priv; - - /* Allocate the private data structure */ - priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL); - - if (NULL == priv) - return -ENOMEM; - - mii_info->priv = priv; - - /* Reset is not done yet */ - priv->resetdone = 0; - - /* Isolate the PHY */ - phy_write(mii_info, MII_BMCR, BMCR_ISOLATE); - - /* Do not bypass the scrambler/descrambler */ - phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); - - /* Clear 10BTCSR to default */ - phy_write(mii_info, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT); - - /* Reconnect the PHY, and enable Autonegotiation */ - phy_write(mii_info, MII_BMCR, BMCR_ANENABLE); - - /* Start a timer for DM9161_DELAY seconds to wait - * for the PHY to be ready */ - init_timer(&priv->timer); - priv->timer.function = &dm9161_timer; - priv->timer.data = (unsigned long) mii_info; - mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); - - return 0; -} - -static void dm9161_close(struct gfar_mii_info *mii_info) -{ - struct dm9161_private *priv = mii_info->priv; - - del_timer_sync(&priv->timer); - kfree(priv); -} - -#if 0 -static int dm9161_ack_interrupt(struct gfar_mii_info *mii_info) -{ - phy_read(mii_info, MII_DM9161_INTR); - - return 0; -} -#endif - -/* Cicada 820x */ -static struct phy_info phy_info_cis820x = { - 0x000fc440, - "Cicada Cis8204", - 0x000fffc0, - .features = MII_GBIT_FEATURES, - .init = &cis820x_init, - .config_aneg = &gbit_config_aneg, - .read_status = &cis820x_read_status, - .ack_interrupt = &cis820x_ack_interrupt, - .config_intr = &cis820x_config_intr, -}; - -static struct phy_info phy_info_dm9161 = { - .phy_id = 0x0181b880, - .name = "Davicom DM9161E", - .phy_id_mask = 0x0ffffff0, - .init = dm9161_init, - .config_aneg = dm9161_config_aneg, - .read_status = dm9161_read_status, - .close = dm9161_close, -}; - -static struct phy_info phy_info_marvell = { - .phy_id = 0x01410c00, - .phy_id_mask = 0xffffff00, - .name = "Marvell 88E1101/88E1111", - .features = MII_GBIT_FEATURES, - .config_aneg = &marvell_config_aneg, - .read_status = &marvell_read_status, - .ack_interrupt = &marvell_ack_interrupt, - .config_intr = &marvell_config_intr, -}; - -static struct phy_info phy_info_genmii= { - .phy_id = 0x00000000, - .phy_id_mask = 0x00000000, - .name = "Generic MII", - .features = MII_BASIC_FEATURES, - .config_aneg = genmii_config_aneg, - .read_status = genmii_read_status, -}; - -static struct phy_info *phy_info[] = { - &phy_info_cis820x, - &phy_info_marvell, - &phy_info_dm9161, - &phy_info_genmii, - NULL -}; - -u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum) -{ - u16 retval; - unsigned long flags; - - spin_lock_irqsave(&mii_info->mdio_lock, flags); - retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum); - spin_unlock_irqrestore(&mii_info->mdio_lock, flags); - - return retval; -} - -void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val) -{ - unsigned long flags; - - spin_lock_irqsave(&mii_info->mdio_lock, flags); - mii_info->mdio_write(mii_info->dev, - mii_info->mii_id, - regnum, val); - spin_unlock_irqrestore(&mii_info->mdio_lock, flags); -} - -/* Use the PHY ID registers to determine what type of PHY is attached - * to device dev. return a struct phy_info structure describing that PHY - */ -struct phy_info * get_phy_info(struct gfar_mii_info *mii_info) -{ - u16 phy_reg; - u32 phy_ID; - int i; - struct phy_info *theInfo = NULL; - struct net_device *dev = mii_info->dev; - - /* Grab the bits from PHYIR1, and put them in the upper half */ - phy_reg = phy_read(mii_info, MII_PHYSID1); - phy_ID = (phy_reg & 0xffff) << 16; - - /* Grab the bits from PHYIR2, and put them in the lower half */ - phy_reg = phy_read(mii_info, MII_PHYSID2); - phy_ID |= (phy_reg & 0xffff); - - /* loop through all the known PHY types, and find one that */ - /* matches the ID we read from the PHY. */ - for (i = 0; phy_info[i]; i++) - if (phy_info[i]->phy_id == - (phy_ID & phy_info[i]->phy_id_mask)) { - theInfo = phy_info[i]; - break; - } - - /* This shouldn't happen, as we have generic PHY support */ - if (theInfo == NULL) { - printk("%s: PHY id %x is not supported!\n", dev->name, phy_ID); - return NULL; - } else { - printk("%s: PHY is %s (%x)\n", dev->name, theInfo->name, - phy_ID); - } - - return theInfo; -} |
