diff options
Diffstat (limited to 'drivers/net/gianfar_phy.c')
| -rw-r--r-- | drivers/net/gianfar_phy.c | 661 |
1 files changed, 661 insertions, 0 deletions
diff --git a/drivers/net/gianfar_phy.c b/drivers/net/gianfar_phy.c new file mode 100644 index 0000000..02b16ab --- /dev/null +++ b/drivers/net/gianfar_phy.c @@ -0,0 +1,661 @@ +/* + * drivers/net/gianfar_phy.c + * + * Gianfar Ethernet Driver -- PHY handling + * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560 + * Based on 8260_io/fcc_enet.c + * + * Author: Andy Fleming + * Maintainer: Kumar Gala (kumar.gala@freescale.com) + * + * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/mm.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/crc32.h> +#include <linux/mii.h> + +#include "gianfar.h" +#include "gianfar_phy.h" + +static void config_genmii_advert(struct gfar_mii_info *mii_info); +static void genmii_setup_forced(struct gfar_mii_info *mii_info); +static void genmii_restart_aneg(struct gfar_mii_info *mii_info); +static int gbit_config_aneg(struct gfar_mii_info *mii_info); +static int genmii_config_aneg(struct gfar_mii_info *mii_info); +static int genmii_update_link(struct gfar_mii_info *mii_info); +static int genmii_read_status(struct gfar_mii_info *mii_info); +u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum); +void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val); + +/* Write value to the PHY for this device to the register at regnum, */ +/* waiting until the write is done before it returns. All PHY */ +/* configuration has to be done through the TSEC1 MIIM regs */ +void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value) +{ + struct gfar_private *priv = netdev_priv(dev); + struct gfar *regbase = priv->phyregs; + + /* Set the PHY address and the register address we want to write */ + gfar_write(®base->miimadd, (mii_id << 8) | regnum); + + /* Write out the value we want */ + gfar_write(®base->miimcon, value); + + /* Wait for the transaction to finish */ + while (gfar_read(®base->miimind) & MIIMIND_BUSY) + cpu_relax(); +} + +/* Reads from register regnum in the PHY for device dev, */ +/* returning the value. Clears miimcom first. All PHY */ +/* configuration has to be done through the TSEC1 MIIM regs */ +int read_phy_reg(struct net_device *dev, int mii_id, int regnum) +{ + struct gfar_private *priv = netdev_priv(dev); + struct gfar *regbase = priv->phyregs; + u16 value; + + /* Set the PHY address and the register address we want to read */ + gfar_write(®base->miimadd, (mii_id << 8) | regnum); + + /* Clear miimcom, and then initiate a read */ + gfar_write(®base->miimcom, 0); + gfar_write(®base->miimcom, MII_READ_COMMAND); + + /* Wait for the transaction to finish */ + while (gfar_read(®base->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)) + cpu_relax(); + + /* Grab the value of the register from miimstat */ + value = gfar_read(®base->miimstat); + + return value; +} + +void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info) +{ + if(mii_info->phyinfo->ack_interrupt) + mii_info->phyinfo->ack_interrupt(mii_info); +} + + +void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts) +{ + mii_info->interrupts = interrupts; + if(mii_info->phyinfo->config_intr) + mii_info->phyinfo->config_intr(mii_info); +} + + +/* Writes MII_ADVERTISE with the appropriate values, after + * sanitizing advertise to make sure only supported features + * are advertised + */ +static void config_genmii_advert(struct gfar_mii_info *mii_info) +{ + u32 advertise; + u16 adv; + + /* Only allow advertising what this PHY supports */ + mii_info->advertising &= mii_info->phyinfo->features; + advertise = mii_info->advertising; + + /* Setup standard advertisement */ + adv = phy_read(mii_info, MII_ADVERTISE); + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); + if (advertise & ADVERTISED_10baseT_Half) + adv |= ADVERTISE_10HALF; + if (advertise & ADVERTISED_10baseT_Full) + adv |= ADVERTISE_10FULL; + if (advertise & ADVERTISED_100baseT_Half) + adv |= ADVERTISE_100HALF; + if (advertise & ADVERTISED_100baseT_Full) + adv |= ADVERTISE_100FULL; + phy_write(mii_info, MII_ADVERTISE, adv); +} + +static void genmii_setup_forced(struct gfar_mii_info *mii_info) +{ + u16 ctrl; + u32 features = mii_info->phyinfo->features; + + ctrl = phy_read(mii_info, MII_BMCR); + + ctrl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPEED1000|BMCR_ANENABLE); + ctrl |= BMCR_RESET; + + switch(mii_info->speed) { + case SPEED_1000: + if(features & (SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full)) { + ctrl |= BMCR_SPEED1000; + break; + } + mii_info->speed = SPEED_100; + case SPEED_100: + if (features & (SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full)) { + ctrl |= BMCR_SPEED100; + break; + } + mii_info->speed = SPEED_10; + case SPEED_10: + if (features & (SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full)) + break; + default: /* Unsupported speed! */ + printk(KERN_ERR "%s: Bad speed!\n", + mii_info->dev->name); + break; + } + + phy_write(mii_info, MII_BMCR, ctrl); +} + + +/* Enable and Restart Autonegotiation */ +static void genmii_restart_aneg(struct gfar_mii_info *mii_info) +{ + u16 ctl; + + ctl = phy_read(mii_info, MII_BMCR); + ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); + phy_write(mii_info, MII_BMCR, ctl); +} + + +static int gbit_config_aneg(struct gfar_mii_info *mii_info) +{ + u16 adv; + u32 advertise; + + if(mii_info->autoneg) { + /* Configure the ADVERTISE register */ + config_genmii_advert(mii_info); + advertise = mii_info->advertising; + + adv = phy_read(mii_info, MII_1000BASETCONTROL); + adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP | + MII_1000BASETCONTROL_HALFDUPLEXCAP); + if (advertise & SUPPORTED_1000baseT_Half) + adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP; + if (advertise & SUPPORTED_1000baseT_Full) + adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP; + phy_write(mii_info, MII_1000BASETCONTROL, adv); + + /* Start/Restart aneg */ + genmii_restart_aneg(mii_info); + } else + genmii_setup_forced(mii_info); + + return 0; +} + +static int marvell_config_aneg(struct gfar_mii_info *mii_info) +{ + /* The Marvell PHY has an errata which requires + * that certain registers get written in order + * to restart autonegotiation */ + phy_write(mii_info, MII_BMCR, BMCR_RESET); + + phy_write(mii_info, 0x1d, 0x1f); + phy_write(mii_info, 0x1e, 0x200c); + phy_write(mii_info, 0x1d, 0x5); + phy_write(mii_info, 0x1e, 0); + phy_write(mii_info, 0x1e, 0x100); + + gbit_config_aneg(mii_info); + + return 0; +} +static int genmii_config_aneg(struct gfar_mii_info *mii_info) +{ + if (mii_info->autoneg) { + config_genmii_advert(mii_info); + genmii_restart_aneg(mii_info); + } else + genmii_setup_forced(mii_info); + + return 0; +} + + +static int genmii_update_link(struct gfar_mii_info *mii_info) +{ + u16 status; + + /* Do a fake read */ + phy_read(mii_info, MII_BMSR); + + /* Read link and autonegotiation status */ + status = phy_read(mii_info, MII_BMSR); + if ((status & BMSR_LSTATUS) == 0) + mii_info->link = 0; + else + mii_info->link = 1; + + /* If we are autonegotiating, and not done, + * return an error */ + if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE)) + return -EAGAIN; + + return 0; +} + +static int genmii_read_status(struct gfar_mii_info *mii_info) +{ + u16 status; + int err; + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + if (mii_info->autoneg) { + status = phy_read(mii_info, MII_LPA); + + if (status & (LPA_10FULL | LPA_100FULL)) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + if (status & (LPA_100FULL | LPA_100HALF)) + mii_info->speed = SPEED_100; + else + mii_info->speed = SPEED_10; + mii_info->pause = 0; + } + /* On non-aneg, we assume what we put in BMCR is the speed, + * though magic-aneg shouldn't prevent this case from occurring + */ + + return 0; +} +static int marvell_read_status(struct gfar_mii_info *mii_info) +{ + u16 status; + int err; + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + /* If the link is up, read the speed and duplex */ + /* If we aren't autonegotiating, assume speeds + * are as set */ + if (mii_info->autoneg && mii_info->link) { + int speed; + status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS); + +#if 0 + /* If speed and duplex aren't resolved, + * return an error. Isn't this handled + * by checking aneg? + */ + if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0) + return -EAGAIN; +#endif + + /* Get the duplexity */ + if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + + /* Get the speed */ + speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK; + switch(speed) { + case MII_M1011_PHY_SPEC_STATUS_1000: + mii_info->speed = SPEED_1000; + break; + case MII_M1011_PHY_SPEC_STATUS_100: + mii_info->speed = SPEED_100; + break; + default: + mii_info->speed = SPEED_10; + break; + } + mii_info->pause = 0; + } + + return 0; +} + + +static int cis820x_read_status(struct gfar_mii_info *mii_info) +{ + u16 status; + int err; + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + /* If the link is up, read the speed and duplex */ + /* If we aren't autonegotiating, assume speeds + * are as set */ + if (mii_info->autoneg && mii_info->link) { + int speed; + + status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT); + if (status & MII_CIS8201_AUXCONSTAT_DUPLEX) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + + speed = status & MII_CIS8201_AUXCONSTAT_SPEED; + + switch (speed) { + case MII_CIS8201_AUXCONSTAT_GBIT: + mii_info->speed = SPEED_1000; + break; + case MII_CIS8201_AUXCONSTAT_100: + mii_info->speed = SPEED_100; + break; + default: + mii_info->speed = SPEED_10; + break; + } + } + + return 0; +} + +static int marvell_ack_interrupt(struct gfar_mii_info *mii_info) +{ + /* Clear the interrupts by reading the reg */ + phy_read(mii_info, MII_M1011_IEVENT); + + return 0; +} + +static int marvell_config_intr(struct gfar_mii_info *mii_info) +{ + if(mii_info->interrupts == MII_INTERRUPT_ENABLED) + phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); + else + phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); + + return 0; +} + +static int cis820x_init(struct gfar_mii_info *mii_info) +{ + phy_write(mii_info, MII_CIS8201_AUX_CONSTAT, + MII_CIS8201_AUXCONSTAT_INIT); + phy_write(mii_info, MII_CIS8201_EXT_CON1, + MII_CIS8201_EXTCON1_INIT); + + return 0; +} + +static int cis820x_ack_interrupt(struct gfar_mii_info *mii_info) +{ + phy_read(mii_info, MII_CIS8201_ISTAT); + + return 0; +} + +static int cis820x_config_intr(struct gfar_mii_info *mii_info) +{ + if(mii_info->interrupts == MII_INTERRUPT_ENABLED) + phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK); + else + phy_write(mii_info, MII_CIS8201_IMASK, 0); + + return 0; +} + +#define DM9161_DELAY 10 + +static int dm9161_read_status(struct gfar_mii_info *mii_info) +{ + u16 status; + int err; + + /* Update the link, but return if there + * was an error */ + err = genmii_update_link(mii_info); + if (err) + return err; + + /* If the link is up, read the speed and duplex */ + /* If we aren't autonegotiating, assume speeds + * are as set */ + if (mii_info->autoneg && mii_info->link) { + status = phy_read(mii_info, MII_DM9161_SCSR); + if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) + mii_info->speed = SPEED_100; + else + mii_info->speed = SPEED_10; + + if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F)) + mii_info->duplex = DUPLEX_FULL; + else + mii_info->duplex = DUPLEX_HALF; + } + + return 0; +} + + +static int dm9161_config_aneg(struct gfar_mii_info *mii_info) +{ + struct dm9161_private *priv = mii_info->priv; + + if(0 == priv->resetdone) + return -EAGAIN; + + return 0; +} + +static void dm9161_timer(unsigned long data) +{ + struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data; + struct dm9161_private *priv = mii_info->priv; + u16 status = phy_read(mii_info, MII_BMSR); + + if (status & BMSR_ANEGCOMPLETE) { + priv->resetdone = 1; + } else + mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); +} + +static int dm9161_init(struct gfar_mii_info *mii_info) +{ + struct dm9161_private *priv; + + /* Allocate the private data structure */ + priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL); + + if (NULL == priv) + return -ENOMEM; + + mii_info->priv = priv; + + /* Reset is not done yet */ + priv->resetdone = 0; + + /* Isolate the PHY */ + phy_write(mii_info, MII_BMCR, BMCR_ISOLATE); + + /* Do not bypass the scrambler/descrambler */ + phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); + + /* Clear 10BTCSR to default */ + phy_write(mii_info, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT); + + /* Reconnect the PHY, and enable Autonegotiation */ + phy_write(mii_info, MII_BMCR, BMCR_ANENABLE); + + /* Start a timer for DM9161_DELAY seconds to wait + * for the PHY to be ready */ + init_timer(&priv->timer); + priv->timer.function = &dm9161_timer; + priv->timer.data = (unsigned long) mii_info; + mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); + + return 0; +} + +static void dm9161_close(struct gfar_mii_info *mii_info) +{ + struct dm9161_private *priv = mii_info->priv; + + del_timer_sync(&priv->timer); + kfree(priv); +} + +#if 0 +static int dm9161_ack_interrupt(struct gfar_mii_info *mii_info) +{ + phy_read(mii_info, MII_DM9161_INTR); + + return 0; +} +#endif + +/* Cicada 820x */ +static struct phy_info phy_info_cis820x = { + 0x000fc440, + "Cicada Cis8204", + 0x000fffc0, + .features = MII_GBIT_FEATURES, + .init = &cis820x_init, + .config_aneg = &gbit_config_aneg, + .read_status = &cis820x_read_status, + .ack_interrupt = &cis820x_ack_interrupt, + .config_intr = &cis820x_config_intr, +}; + +static struct phy_info phy_info_dm9161 = { + .phy_id = 0x0181b880, + .name = "Davicom DM9161E", + .phy_id_mask = 0x0ffffff0, + .init = dm9161_init, + .config_aneg = dm9161_config_aneg, + .read_status = dm9161_read_status, + .close = dm9161_close, +}; + +static struct phy_info phy_info_marvell = { + .phy_id = 0x01410c00, + .phy_id_mask = 0xffffff00, + .name = "Marvell 88E1101", + .features = MII_GBIT_FEATURES, + .config_aneg = &marvell_config_aneg, + .read_status = &marvell_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, +}; + +static struct phy_info phy_info_genmii= { + .phy_id = 0x00000000, + .phy_id_mask = 0x00000000, + .name = "Generic MII", + .features = MII_BASIC_FEATURES, + .config_aneg = genmii_config_aneg, + .read_status = genmii_read_status, +}; + +static struct phy_info *phy_info[] = { + &phy_info_cis820x, + &phy_info_marvell, + &phy_info_dm9161, + &phy_info_genmii, + NULL +}; + +u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum) +{ + u16 retval; + unsigned long flags; + + spin_lock_irqsave(&mii_info->mdio_lock, flags); + retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum); + spin_unlock_irqrestore(&mii_info->mdio_lock, flags); + + return retval; +} + +void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val) +{ + unsigned long flags; + + spin_lock_irqsave(&mii_info->mdio_lock, flags); + mii_info->mdio_write(mii_info->dev, + mii_info->mii_id, + regnum, val); + spin_unlock_irqrestore(&mii_info->mdio_lock, flags); +} + +/* Use the PHY ID registers to determine what type of PHY is attached + * to device dev. return a struct phy_info structure describing that PHY + */ +struct phy_info * get_phy_info(struct gfar_mii_info *mii_info) +{ + u16 phy_reg; + u32 phy_ID; + int i; + struct phy_info *theInfo = NULL; + struct net_device *dev = mii_info->dev; + + /* Grab the bits from PHYIR1, and put them in the upper half */ + phy_reg = phy_read(mii_info, MII_PHYSID1); + phy_ID = (phy_reg & 0xffff) << 16; + + /* Grab the bits from PHYIR2, and put them in the lower half */ + phy_reg = phy_read(mii_info, MII_PHYSID2); + phy_ID |= (phy_reg & 0xffff); + + /* loop through all the known PHY types, and find one that */ + /* matches the ID we read from the PHY. */ + for (i = 0; phy_info[i]; i++) + if (phy_info[i]->phy_id == + (phy_ID & phy_info[i]->phy_id_mask)) { + theInfo = phy_info[i]; + break; + } + + /* This shouldn't happen, as we have generic PHY support */ + if (theInfo == NULL) { + printk("%s: PHY id %x is not supported!\n", dev->name, phy_ID); + return NULL; + } else { + printk("%s: PHY is %s (%x)\n", dev->name, theInfo->name, + phy_ID); + } + + return theInfo; +} |
