summaryrefslogtreecommitdiffstats
path: root/drivers/net/gianfar.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/gianfar.c')
-rw-r--r--drivers/net/gianfar.c652
1 files changed, 469 insertions, 183 deletions
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index b43b2b1..6518334 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1,4 +1,4 @@
-/*
+/*
* drivers/net/gianfar.c
*
* Gianfar Ethernet Driver
@@ -22,10 +22,9 @@
* B-V +1.62
*
* Theory of operation
- * This driver is designed for the Triple-speed Ethernet
- * controllers on the Freescale 8540/8560 integrated processors,
- * as well as the Fast Ethernet Controller on the 8540.
- *
+ * This driver is designed for the non-CPM ethernet controllers
+ * on the 85xx and 83xx family of integrated processors
+ *
* The driver is initialized through platform_device. Structures which
* define the configuration needed by the board are defined in a
* board structure in arch/ppc/platforms (though I do not
@@ -39,12 +38,12 @@
*
* The Gianfar Ethernet Controller uses a ring of buffer
* descriptors. The beginning is indicated by a register
- * pointing to the physical address of the start of the ring.
- * The end is determined by a "wrap" bit being set in the
+ * pointing to the physical address of the start of the ring.
+ * The end is determined by a "wrap" bit being set in the
* last descriptor of the ring.
*
* When a packet is received, the RXF bit in the
- * IEVENT register is set, triggering an interrupt when the
+ * IEVENT register is set, triggering an interrupt when the
* corresponding bit in the IMASK register is also set (if
* interrupt coalescing is active, then the interrupt may not
* happen immediately, but will wait until either a set number
@@ -52,7 +51,7 @@
* interrupt handler will signal there is work to be done, and
* exit. Without NAPI, the packet(s) will be handled
* immediately. Both methods will start at the last known empty
- * descriptor, and process every subsequent descriptor until there
+ * descriptor, and process every subsequent descriptor until there
* are none left with data (NAPI will stop after a set number of
* packets to give time to other tasks, but will eventually
* process all the packets). The data arrives inside a
@@ -83,9 +82,13 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
+#include <linux/if_vlan.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/device.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -123,7 +126,7 @@ static int gfar_set_mac_address(struct net_device *dev);
static int gfar_change_mtu(struct net_device *dev, int new_mtu);
static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs);
static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs);
-irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs);
static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static void gfar_phy_change(void *data);
@@ -139,9 +142,12 @@ static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
#ifdef CONFIG_GFAR_NAPI
static int gfar_poll(struct net_device *dev, int *budget);
#endif
-static int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
+int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length);
static void gfar_phy_startup_timer(unsigned long data);
+static void gfar_vlan_rx_register(struct net_device *netdev,
+ struct vlan_group *grp);
+static void gfar_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
extern struct ethtool_ops gfar_ethtool_ops;
@@ -149,6 +155,13 @@ MODULE_AUTHOR("Freescale Semiconductor, Inc");
MODULE_DESCRIPTION("Gianfar Ethernet Driver");
MODULE_LICENSE("GPL");
+int gfar_uses_fcb(struct gfar_private *priv)
+{
+ if (priv->vlan_enable || priv->rx_csum_enable)
+ return 1;
+ else
+ return 0;
+}
static int gfar_probe(struct device *device)
{
u32 tempval;
@@ -159,7 +172,6 @@ static int gfar_probe(struct device *device)
struct resource *r;
int idx;
int err = 0;
- int dev_ethtool_ops = 0;
einfo = (struct gianfar_platform_data *) pdev->dev.platform_data;
@@ -265,15 +277,69 @@ static int gfar_probe(struct device *device)
dev->mtu = 1500;
dev->set_multicast_list = gfar_set_multi;
- /* Index into the array of possible ethtool
- * ops to catch all 4 possibilities */
- if((priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) == 0)
- dev_ethtool_ops += 1;
+ dev->ethtool_ops = &gfar_ethtool_ops;
+
+ if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
+ priv->rx_csum_enable = 1;
+ dev->features |= NETIF_F_IP_CSUM;
+ } else
+ priv->rx_csum_enable = 0;
+
+ priv->vlgrp = NULL;
- if((priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE) == 0)
- dev_ethtool_ops += 2;
+ if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) {
+ dev->vlan_rx_register = gfar_vlan_rx_register;
+ dev->vlan_rx_kill_vid = gfar_vlan_rx_kill_vid;
- dev->ethtool_ops = gfar_op_array[dev_ethtool_ops];
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+
+ priv->vlan_enable = 1;
+ }
+
+ if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) {
+ priv->extended_hash = 1;
+ priv->hash_width = 9;
+
+ priv->hash_regs[0] = &priv->regs->igaddr0;
+ priv->hash_regs[1] = &priv->regs->igaddr1;
+ priv->hash_regs[2] = &priv->regs->igaddr2;
+ priv->hash_regs[3] = &priv->regs->igaddr3;
+ priv->hash_regs[4] = &priv->regs->igaddr4;
+ priv->hash_regs[5] = &priv->regs->igaddr5;
+ priv->hash_regs[6] = &priv->regs->igaddr6;
+ priv->hash_regs[7] = &priv->regs->igaddr7;
+ priv->hash_regs[8] = &priv->regs->gaddr0;
+ priv->hash_regs[9] = &priv->regs->gaddr1;
+ priv->hash_regs[10] = &priv->regs->gaddr2;
+ priv->hash_regs[11] = &priv->regs->gaddr3;
+ priv->hash_regs[12] = &priv->regs->gaddr4;
+ priv->hash_regs[13] = &priv->regs->gaddr5;
+ priv->hash_regs[14] = &priv->regs->gaddr6;
+ priv->hash_regs[15] = &priv->regs->gaddr7;
+
+ } else {
+ priv->extended_hash = 0;
+ priv->hash_width = 8;
+
+ priv->hash_regs[0] = &priv->regs->gaddr0;
+ priv->hash_regs[1] = &priv->regs->gaddr1;
+ priv->hash_regs[2] = &priv->regs->gaddr2;
+ priv->hash_regs[3] = &priv->regs->gaddr3;
+ priv->hash_regs[4] = &priv->regs->gaddr4;
+ priv->hash_regs[5] = &priv->regs->gaddr5;
+ priv->hash_regs[6] = &priv->regs->gaddr6;
+ priv->hash_regs[7] = &priv->regs->gaddr7;
+ }
+
+ if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_PADDING)
+ priv->padding = DEFAULT_PADDING;
+ else
+ priv->padding = 0;
+
+ dev->hard_header_len += priv->padding;
+
+ if (dev->features & NETIF_F_IP_CSUM)
+ dev->hard_header_len += GMAC_FCB_LEN;
priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE;
#ifdef CONFIG_GFAR_BUFSTASH
@@ -289,6 +355,9 @@ static int gfar_probe(struct device *device)
priv->rxcount = DEFAULT_RXCOUNT;
priv->rxtime = DEFAULT_RXTIME;
+ /* Enable most messages by default */
+ priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1;
+
err = register_netdev(dev);
if (err) {
@@ -360,8 +429,9 @@ static int init_phy(struct net_device *dev)
GFP_KERNEL);
if(NULL == mii_info) {
- printk(KERN_ERR "%s: Could not allocate mii_info\n",
- dev->name);
+ if (netif_msg_ifup(priv))
+ printk(KERN_ERR "%s: Could not allocate mii_info\n",
+ dev->name);
return -ENOMEM;
}
@@ -410,7 +480,8 @@ static int init_phy(struct net_device *dev)
curphy = get_phy_info(priv->mii_info);
if (curphy == NULL) {
- printk(KERN_ERR "%s: No PHY found\n", dev->name);
+ if (netif_msg_ifup(priv))
+ printk(KERN_ERR "%s: No PHY found\n", dev->name);
err = -1;
goto no_phy;
}
@@ -421,7 +492,7 @@ static int init_phy(struct net_device *dev)
if(curphy->init) {
err = curphy->init(priv->mii_info);
- if (err)
+ if (err)
goto phy_init_fail;
}
@@ -446,14 +517,14 @@ static void init_registers(struct net_device *dev)
gfar_write(&priv->regs->imask, IMASK_INIT_CLEAR);
/* Init hash registers to zero */
- gfar_write(&priv->regs->iaddr0, 0);
- gfar_write(&priv->regs->iaddr1, 0);
- gfar_write(&priv->regs->iaddr2, 0);
- gfar_write(&priv->regs->iaddr3, 0);
- gfar_write(&priv->regs->iaddr4, 0);
- gfar_write(&priv->regs->iaddr5, 0);
- gfar_write(&priv->regs->iaddr6, 0);
- gfar_write(&priv->regs->iaddr7, 0);
+ gfar_write(&priv->regs->igaddr0, 0);
+ gfar_write(&priv->regs->igaddr1, 0);
+ gfar_write(&priv->regs->igaddr2, 0);
+ gfar_write(&priv->regs->igaddr3, 0);
+ gfar_write(&priv->regs->igaddr4, 0);
+ gfar_write(&priv->regs->igaddr5, 0);
+ gfar_write(&priv->regs->igaddr6, 0);
+ gfar_write(&priv->regs->igaddr7, 0);
gfar_write(&priv->regs->gaddr0, 0);
gfar_write(&priv->regs->gaddr1, 0);
@@ -464,9 +535,6 @@ static void init_registers(struct net_device *dev)
gfar_write(&priv->regs->gaddr6, 0);
gfar_write(&priv->regs->gaddr7, 0);
- /* Zero out rctrl */
- gfar_write(&priv->regs->rctrl, 0x00000000);
-
/* Zero out the rmon mib registers if it has them */
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
memset((void *) &(priv->regs->rmon), 0,
@@ -497,20 +565,14 @@ static void init_registers(struct net_device *dev)
gfar_write(&priv->regs->tbipa, TBIPA_VALUE);
}
-void stop_gfar(struct net_device *dev)
+
+/* Halt the receive and transmit queues */
+void gfar_halt(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
struct gfar *regs = priv->regs;
- unsigned long flags;
u32 tempval;
- /* Lock it down */
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Tell the kernel the link is down */
- priv->mii_info->link = 0;
- adjust_link(dev);
-
/* Mask all interrupts */
gfar_write(&regs->imask, IMASK_INIT_CLEAR);
@@ -533,13 +595,29 @@ void stop_gfar(struct net_device *dev)
tempval = gfar_read(&regs->maccfg1);
tempval &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN);
gfar_write(&regs->maccfg1, tempval);
+}
+
+void stop_gfar(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ struct gfar *regs = priv->regs;
+ unsigned long flags;
+
+ /* Lock it down */
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /* Tell the kernel the link is down */
+ priv->mii_info->link = 0;
+ adjust_link(dev);
+
+ gfar_halt(dev);
if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) {
/* Clear any pending interrupts */
mii_clear_phy_interrupt(priv->mii_info);
/* Disable PHY Interrupts */
- mii_configure_phy_interrupt(priv->mii_info,
+ mii_configure_phy_interrupt(priv->mii_info,
MII_INTERRUPT_DISABLED);
}
@@ -566,7 +644,7 @@ void stop_gfar(struct net_device *dev)
sizeof(struct txbd8)*priv->tx_ring_size
+ sizeof(struct rxbd8)*priv->rx_ring_size,
priv->tx_bd_base,
- gfar_read(&regs->tbase));
+ gfar_read(&regs->tbase0));
}
/* If there are any tx skbs or rx skbs still around, free them.
@@ -620,6 +698,34 @@ void free_skb_resources(struct gfar_private *priv)
}
}
+void gfar_start(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ struct gfar *regs = priv->regs;
+ u32 tempval;
+
+ /* Enable Rx and Tx in MACCFG1 */
+ tempval = gfar_read(&regs->maccfg1);
+ tempval |= (MACCFG1_RX_EN | MACCFG1_TX_EN);
+ gfar_write(&regs->maccfg1, tempval);
+
+ /* Initialize DMACTRL to have WWR and WOP */
+ tempval = gfar_read(&priv->regs->dmactrl);
+ tempval |= DMACTRL_INIT_SETTINGS;
+ gfar_write(&priv->regs->dmactrl, tempval);
+
+ /* Clear THLT, so that the DMA starts polling now */
+ gfar_write(&regs->tstat, TSTAT_CLEAR_THALT);
+
+ /* Make sure we aren't stopped */
+ tempval = gfar_read(&priv->regs->dmactrl);
+ tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
+ gfar_write(&priv->regs->dmactrl, tempval);
+
+ /* Unmask the interrupts we look for */
+ gfar_write(&regs->imask, IMASK_DEFAULT);
+}
+
/* Bring the controller up and running */
int startup_gfar(struct net_device *dev)
{
@@ -630,33 +736,34 @@ int startup_gfar(struct net_device *dev)
int i;
struct gfar_private *priv = netdev_priv(dev);
struct gfar *regs = priv->regs;
- u32 tempval;
int err = 0;
+ u32 rctrl = 0;
gfar_write(&regs->imask, IMASK_INIT_CLEAR);
/* Allocate memory for the buffer descriptors */
- vaddr = (unsigned long) dma_alloc_coherent(NULL,
+ vaddr = (unsigned long) dma_alloc_coherent(NULL,
sizeof (struct txbd8) * priv->tx_ring_size +
sizeof (struct rxbd8) * priv->rx_ring_size,
&addr, GFP_KERNEL);
if (vaddr == 0) {
- printk(KERN_ERR "%s: Could not allocate buffer descriptors!\n",
- dev->name);
+ if (netif_msg_ifup(priv))
+ printk(KERN_ERR "%s: Could not allocate buffer descriptors!\n",
+ dev->name);
return -ENOMEM;
}
priv->tx_bd_base = (struct txbd8 *) vaddr;
/* enet DMA only understands physical addresses */
- gfar_write(&regs->tbase, addr);
+ gfar_write(&regs->tbase0, addr);
/* Start the rx descriptor ring where the tx ring leaves off */
addr = addr + sizeof (struct txbd8) * priv->tx_ring_size;
vaddr = vaddr + sizeof (struct txbd8) * priv->tx_ring_size;
priv->rx_bd_base = (struct rxbd8 *) vaddr;
- gfar_write(&regs->rbase, addr);
+ gfar_write(&regs->rbase0, addr);
/* Setup the skbuff rings */
priv->tx_skbuff =
@@ -664,8 +771,9 @@ int startup_gfar(struct net_device *dev)
priv->tx_ring_size, GFP_KERNEL);
if (priv->tx_skbuff == NULL) {
- printk(KERN_ERR "%s: Could not allocate tx_skbuff\n",
- dev->name);
+ if (netif_msg_ifup(priv))
+ printk(KERN_ERR "%s: Could not allocate tx_skbuff\n",
+ dev->name);
err = -ENOMEM;
goto tx_skb_fail;
}
@@ -678,8 +786,9 @@ int startup_gfar(struct net_device *dev)
priv->rx_ring_size, GFP_KERNEL);
if (priv->rx_skbuff == NULL) {
- printk(KERN_ERR "%s: Could not allocate rx_skbuff\n",
- dev->name);
+ if (netif_msg_ifup(priv))
+ printk(KERN_ERR "%s: Could not allocate rx_skbuff\n",
+ dev->name);
err = -ENOMEM;
goto rx_skb_fail;
}
@@ -726,12 +835,13 @@ int startup_gfar(struct net_device *dev)
/* If the device has multiple interrupts, register for
* them. Otherwise, only register for the one */
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
- /* Install our interrupt handlers for Error,
+ /* Install our interrupt handlers for Error,
* Transmit, and Receive */
if (request_irq(priv->interruptError, gfar_error,
0, "enet_error", dev) < 0) {
- printk(KERN_ERR "%s: Can't get IRQ %d\n",
- dev->name, priv->interruptError);
+ if (netif_msg_intr(priv))
+ printk(KERN_ERR "%s: Can't get IRQ %d\n",
+ dev->name, priv->interruptError);
err = -1;
goto err_irq_fail;
@@ -739,8 +849,9 @@ int startup_gfar(struct net_device *dev)
if (request_irq(priv->interruptTransmit, gfar_transmit,
0, "enet_tx", dev) < 0) {
- printk(KERN_ERR "%s: Can't get IRQ %d\n",
- dev->name, priv->interruptTransmit);
+ if (netif_msg_intr(priv))
+ printk(KERN_ERR "%s: Can't get IRQ %d\n",
+ dev->name, priv->interruptTransmit);
err = -1;
@@ -749,8 +860,9 @@ int startup_gfar(struct net_device *dev)
if (request_irq(priv->interruptReceive, gfar_receive,
0, "enet_rx", dev) < 0) {
- printk(KERN_ERR "%s: Can't get IRQ %d (receive0)\n",
- dev->name, priv->interruptReceive);
+ if (netif_msg_intr(priv))
+ printk(KERN_ERR "%s: Can't get IRQ %d (receive0)\n",
+ dev->name, priv->interruptReceive);
err = -1;
goto rx_irq_fail;
@@ -758,8 +870,9 @@ int startup_gfar(struct net_device *dev)
} else {
if (request_irq(priv->interruptTransmit, gfar_interrupt,
0, "gfar_interrupt", dev) < 0) {
- printk(KERN_ERR "%s: Can't get IRQ %d\n",
- dev->name, priv->interruptError);
+ if (netif_msg_intr(priv))
+ printk(KERN_ERR "%s: Can't get IRQ %d\n",
+ dev->name, priv->interruptError);
err = -1;
goto err_irq_fail;
@@ -787,28 +900,22 @@ int startup_gfar(struct net_device *dev)
else
gfar_write(&regs->rxic, 0);
- init_waitqueue_head(&priv->rxcleanupq);
+ if (priv->rx_csum_enable)
+ rctrl |= RCTRL_CHECKSUMMING;
- /* Enable Rx and Tx in MACCFG1 */
- tempval = gfar_read(&regs->maccfg1);
- tempval |= (MACCFG1_RX_EN | MACCFG1_TX_EN);
- gfar_write(&regs->maccfg1, tempval);
+ if (priv->extended_hash)
+ rctrl |= RCTRL_EXTHASH;
- /* Initialize DMACTRL to have WWR and WOP */
- tempval = gfar_read(&priv->regs->dmactrl);
- tempval |= DMACTRL_INIT_SETTINGS;
- gfar_write(&priv->regs->dmactrl, tempval);
+ if (priv->vlan_enable)
+ rctrl |= RCTRL_VLAN;
- /* Clear THLT, so that the DMA starts polling now */
- gfar_write(&regs->tstat, TSTAT_CLEAR_THALT);
+ /* Init rctrl based on our settings */
+ gfar_write(&priv->regs->rctrl, rctrl);
- /* Make sure we aren't stopped */
- tempval = gfar_read(&priv->regs->dmactrl);
- tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
- gfar_write(&priv->regs->dmactrl, tempval);
+ if (dev->features & NETIF_F_IP_CSUM)
+ gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM);
- /* Unmask the interrupts we look for */
- gfar_write(&regs->imask, IMASK_DEFAULT);
+ gfar_start(dev);
return 0;
@@ -824,7 +931,7 @@ tx_skb_fail:
sizeof(struct txbd8)*priv->tx_ring_size
+ sizeof(struct rxbd8)*priv->rx_ring_size,
priv->tx_bd_base,
- gfar_read(&regs->tbase));
+ gfar_read(&regs->tbase0));
if (priv->mii_info->phyinfo->close)
priv->mii_info->phyinfo->close(priv->mii_info);
@@ -857,11 +964,62 @@ static int gfar_enet_open(struct net_device *dev)
return err;
}
+static struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp)
+{
+ struct txfcb *fcb = (struct txfcb *)skb_push (skb, GMAC_FCB_LEN);
+
+ memset(fcb, 0, GMAC_FCB_LEN);
+
+ /* Flag the bd so the controller looks for the FCB */
+ bdp->status |= TXBD_TOE;
+
+ return fcb;
+}
+
+static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb)
+{
+ int len;
+
+ /* If we're here, it's a IP packet with a TCP or UDP
+ * payload. We set it to checksum, using a pseudo-header
+ * we provide
+ */
+ fcb->ip = 1;
+ fcb->tup = 1;
+ fcb->ctu = 1;
+ fcb->nph = 1;
+
+ /* Notify the controller what the protocol is */
+ if (skb->nh.iph->protocol == IPPROTO_UDP)
+ fcb->udp = 1;
+
+ /* l3os is the distance between the start of the
+ * frame (skb->data) and the start of the IP hdr.
+ * l4os is the distance between the start of the
+ * l3 hdr and the l4 hdr */
+ fcb->l3os = (u16)(skb->nh.raw - skb->data - GMAC_FCB_LEN);
+ fcb->l4os = (u16)(skb->h.raw - skb->nh.raw);
+
+ len = skb->nh.iph->tot_len - fcb->l4os;
+
+ /* Provide the pseudoheader csum */
+ fcb->phcs = ~csum_tcpudp_magic(skb->nh.iph->saddr,
+ skb->nh.iph->daddr, len,
+ skb->nh.iph->protocol, 0);
+}
+
+void gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb)
+{
+ fcb->vln = 1;
+ fcb->vlctl = vlan_tx_tag_get(skb);
+}
+
/* This is called by the kernel when a frame is ready for transmission. */
/* It is pointed to by the dev->hard_start_xmit function pointer */
static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
+ struct txfcb *fcb = NULL;
struct txbd8 *txbdp;
/* Update transmit stats */
@@ -876,9 +1034,24 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
/* Clear all but the WRAP status flags */
txbdp->status &= TXBD_WRAP;
+ /* Set up checksumming */
+ if ((dev->features & NETIF_F_IP_CSUM)
+ && (CHECKSUM_HW == skb->ip_summed)) {
+ fcb = gfar_add_fcb(skb, txbdp);
+ gfar_tx_checksum(skb, fcb);
+ }
+
+ if (priv->vlan_enable &&
+ unlikely(priv->vlgrp && vlan_tx_tag_present(skb))) {
+ if (NULL == fcb)
+ fcb = gfar_add_fcb(skb, txbdp);
+
+ gfar_tx_vlan(skb, fcb);
+ }
+
/* Set buffer length and pointer */
txbdp->length = skb->len;
- txbdp->bufPtr = dma_map_single(NULL, skb->data,
+ txbdp->bufPtr = dma_map_single(NULL, skb->data,
skb->len, DMA_TO_DEVICE);
/* Save the skb pointer so we can free it later */
@@ -972,15 +1145,78 @@ int gfar_set_mac_address(struct net_device *dev)
}
+/* Enables and disables VLAN insertion/extraction */
+static void gfar_vlan_rx_register(struct net_device *dev,
+ struct vlan_group *grp)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ u32 tempval;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ priv->vlgrp = grp;
+
+ if (grp) {
+ /* Enable VLAN tag insertion */
+ tempval = gfar_read(&priv->regs->tctrl);
+ tempval |= TCTRL_VLINS;
+
+ gfar_write(&priv->regs->tctrl, tempval);
+
+ /* Enable VLAN tag extraction */
+ tempval = gfar_read(&priv->regs->rctrl);
+ tempval |= RCTRL_VLEX;
+ gfar_write(&priv->regs->rctrl, tempval);
+ } else {
+ /* Disable VLAN tag insertion */
+ tempval = gfar_read(&priv->regs->tctrl);
+ tempval &= ~TCTRL_VLINS;
+ gfar_write(&priv->regs->tctrl, tempval);
+
+ /* Disable VLAN tag extraction */
+ tempval = gfar_read(&priv->regs->rctrl);
+ tempval &= ~RCTRL_VLEX;
+ gfar_write(&priv->regs->rctrl, tempval);
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+
+static void gfar_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ if (priv->vlgrp)
+ priv->vlgrp->vlan_devices[vid] = NULL;
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+
static int gfar_change_mtu(struct net_device *dev, int new_mtu)
{
int tempsize, tempval;
struct gfar_private *priv = netdev_priv(dev);
int oldsize = priv->rx_buffer_size;
- int frame_size = new_mtu + 18;
+ int frame_size = new_mtu + ETH_HLEN;
+
+ if (priv->vlan_enable)
+ frame_size += VLAN_ETH_HLEN;
+
+ if (gfar_uses_fcb(priv))
+ frame_size += GMAC_FCB_LEN;
+
+ frame_size += priv->padding;
if ((frame_size < 64) || (frame_size > JUMBO_FRAME_SIZE)) {
- printk(KERN_ERR "%s: Invalid MTU setting\n", dev->name);
+ if (netif_msg_drv(priv))
+ printk(KERN_ERR "%s: Invalid MTU setting\n",
+ dev->name);
return -EINVAL;
}
@@ -1120,7 +1356,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
skb->dev = dev;
bdp->bufPtr = dma_map_single(NULL, skb->data,
- priv->rx_buffer_size + RXBUF_ALIGNMENT,
+ priv->rx_buffer_size + RXBUF_ALIGNMENT,
DMA_FROM_DEVICE);
bdp->length = 0;
@@ -1190,11 +1426,10 @@ irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs)
__netif_rx_schedule(dev);
} else {
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_DEBUG "%s: receive called twice (%x)[%x]\n",
- dev->name, gfar_read(&priv->regs->ievent),
- gfar_read(&priv->regs->imask));
-#endif
+ if (netif_msg_rx_err(priv))
+ printk(KERN_DEBUG "%s: receive called twice (%x)[%x]\n",
+ dev->name, gfar_read(&priv->regs->ievent),
+ gfar_read(&priv->regs->imask));
}
#else
@@ -1209,15 +1444,43 @@ irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs)
else
gfar_write(&priv->regs->rxic, 0);
- /* Just in case we need to wake the ring param changer */
- priv->rxclean = 1;
-
spin_unlock(&priv->lock);
#endif
return IRQ_HANDLED;
}
+static inline int gfar_rx_vlan(struct sk_buff *skb,
+ struct vlan_group *vlgrp, unsigned short vlctl)
+{
+#ifdef CONFIG_GFAR_NAPI
+ return vlan_hwaccel_receive_skb(skb, vlgrp, vlctl);
+#else
+ return vlan_hwaccel_rx(skb, vlgrp, vlctl);
+#endif
+}
+
+static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb)
+{
+ /* If valid headers were found, and valid sums
+ * were verified, then we tell the kernel that no
+ * checksumming is necessary. Otherwise, it is */
+ if (fcb->cip && !fcb->eip && fcb->ctu && !fcb->etu)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
+}
+
+
+static inline struct rxfcb *gfar_get_fcb(struct sk_buff *skb)
+{
+ struct rxfcb *fcb = (struct rxfcb *)skb->data;
+
+ /* Remove the FCB from the skb */
+ skb_pull(skb, GMAC_FCB_LEN);
+
+ return fcb;
+}
/* gfar_process_frame() -- handle one incoming packet if skb
* isn't NULL. */
@@ -1225,35 +1488,51 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
int length)
{
struct gfar_private *priv = netdev_priv(dev);
+ struct rxfcb *fcb = NULL;
if (skb == NULL) {
-#ifdef BRIEF_GFAR_ERRORS
- printk(KERN_WARNING "%s: Missing skb!!.\n",
- dev->name);
-#endif
+ if (netif_msg_rx_err(priv))
+ printk(KERN_WARNING "%s: Missing skb!!.\n", dev->name);
priv->stats.rx_dropped++;
priv->extra_stats.rx_skbmissing++;
} else {
+ int ret;
+
/* Prep the skb for the packet */
skb_put(skb, length);
+ /* Grab the FCB if there is one */
+ if (gfar_uses_fcb(priv))
+ fcb = gfar_get_fcb(skb);
+
+ /* Remove the padded bytes, if there are any */
+ if (priv->padding)
+ skb_pull(skb, priv->padding);
+
+ if (priv->rx_csum_enable)
+ gfar_rx_checksum(skb, fcb);
+
/* Tell the skb what kind of packet this is */
skb->protocol = eth_type_trans(skb, dev);
/* Send the packet up the stack */
- if (RECEIVE(skb) == NET_RX_DROP) {
+ if (unlikely(priv->vlgrp && fcb->vln))
+ ret = gfar_rx_vlan(skb, priv->vlgrp, fcb->vlctl);
+ else
+ ret = RECEIVE(skb);
+
+ if (NET_RX_DROP == ret)
priv->extra_stats.kernel_dropped++;
- }
}
return 0;
}
/* gfar_clean_rx_ring() -- Processes each frame in the rx ring
- * until the budget/quota has been reached. Returns the number
+ * until the budget/quota has been reached. Returns the number
* of frames handled
*/
-static int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
+int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
{
struct rxbd8 *bdp;
struct sk_buff *skb;
@@ -1355,9 +1634,6 @@ static int gfar_poll(struct net_device *dev, int *budget)
mk_ic_value(priv->rxcount, priv->rxtime));
else
gfar_write(&priv->regs->rxic, 0);
-
- /* Signal to the ring size changer that it's safe to go */
- priv->rxclean = 1;
}
return (rx_work_limit < 0) ? 1 : 0;
@@ -1393,10 +1669,8 @@ static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs)
if (events & IEVENT_CRL)
priv->stats.tx_aborted_errors++;
if (events & IEVENT_XFUN) {
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_WARNING "%s: tx underrun. dropped packet\n",
- dev->name);
-#endif
+ if (netif_msg_tx_err(priv))
+ printk(KERN_WARNING "%s: tx underrun. dropped packet\n", dev->name);
priv->stats.tx_dropped++;
priv->extra_stats.tx_underrun++;
@@ -1415,36 +1689,30 @@ static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs)
gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT);
#endif
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_DEBUG "%s: busy error (rhalt: %x)\n", dev->name,
- gfar_read(&priv->regs->rstat));
-#endif
+ if (netif_msg_rx_err(priv))
+ printk(KERN_DEBUG "%s: busy error (rhalt: %x)\n",
+ dev->name,
+ gfar_read(&priv->regs->rstat));
}
if (events & IEVENT_BABR) {
priv->stats.rx_errors++;
priv->extra_stats.rx_babr++;
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_DEBUG "%s: babbling error\n", dev->name);
-#endif
+ if (netif_msg_rx_err(priv))
+ printk(KERN_DEBUG "%s: babbling error\n", dev->name);
}
if (events & IEVENT_EBERR) {
priv->extra_stats.eberr++;
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_DEBUG "%s: EBERR\n", dev->name);
-#endif
- }
- if (events & IEVENT_RXC) {
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_DEBUG "%s: control frame\n", dev->name);
-#endif
+ if (netif_msg_rx_err(priv))
+ printk(KERN_DEBUG "%s: EBERR\n", dev->name);
}
+ if ((events & IEVENT_RXC) && (netif_msg_rx_err(priv)))
+ printk(KERN_DEBUG "%s: control frame\n", dev->name);
if (events & IEVENT_BABT) {
priv->extra_stats.tx_babt++;
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_DEBUG "%s: babt error\n", dev->name);
-#endif
+ if (netif_msg_rx_err(priv))
+ printk(KERN_DEBUG "%s: babt error\n", dev->name);
}
return IRQ_HANDLED;
@@ -1510,7 +1778,7 @@ static void gfar_phy_timer(unsigned long data)
* If, after GFAR_AN_TIMEOUT seconds, it has not
* finished, we switch to forced.
* Either way, once the process has completed, we either
- * request the interrupt, or switch the timer over to
+ * request the interrupt, or switch the timer over to
* using gfar_phy_timer to check status */
static void gfar_phy_startup_timer(unsigned long data)
{
@@ -1535,8 +1803,9 @@ static void gfar_phy_startup_timer(unsigned long data)
/* Forcing failed! Give up */
if(result) {
- printk(KERN_ERR "%s: Forcing failed!\n",
- mii_info->dev->name);
+ if (netif_msg_link(priv))
+ printk(KERN_ERR "%s: Forcing failed!\n",
+ mii_info->dev->name);
return;
}
}
@@ -1546,16 +1815,17 @@ static void gfar_phy_startup_timer(unsigned long data)
/* Grab the PHY interrupt, if necessary/possible */
if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) {
- if (request_irq(priv->einfo->interruptPHY,
+ if (request_irq(priv->einfo->interruptPHY,
phy_interrupt,
- SA_SHIRQ,
- "phy_interrupt",
+ SA_SHIRQ,
+ "phy_interrupt",
mii_info->dev) < 0) {
- printk(KERN_ERR "%s: Can't get IRQ %d (PHY)\n",
- mii_info->dev->name,
+ if (netif_msg_intr(priv))
+ printk(KERN_ERR "%s: Can't get IRQ %d (PHY)\n",
+ mii_info->dev->name,
priv->einfo->interruptPHY);
} else {
- mii_configure_phy_interrupt(priv->mii_info,
+ mii_configure_phy_interrupt(priv->mii_info,
MII_INTERRUPT_ENABLED);
return;
}
@@ -1592,15 +1862,17 @@ static void adjust_link(struct net_device *dev)
tempval &= ~(MACCFG2_FULL_DUPLEX);
gfar_write(&regs->maccfg2, tempval);
- printk(KERN_INFO "%s: Half Duplex\n",
- dev->name);
+ if (netif_msg_link(priv))
+ printk(KERN_INFO "%s: Half Duplex\n",
+ dev->name);
} else {
tempval = gfar_read(&regs->maccfg2);
tempval |= MACCFG2_FULL_DUPLEX;
gfar_write(&regs->maccfg2, tempval);
- printk(KERN_INFO "%s: Full Duplex\n",
- dev->name);
+ if (netif_msg_link(priv))
+ printk(KERN_INFO "%s: Full Duplex\n",
+ dev->name);
}
priv->oldduplex = mii_info->duplex;
@@ -1622,27 +1894,32 @@ static void adjust_link(struct net_device *dev)
gfar_write(&regs->maccfg2, tempval);
break;
default:
- printk(KERN_WARNING
- "%s: Ack! Speed (%d) is not 10/100/1000!\n",
- dev->name, mii_info->speed);
+ if (netif_msg_link(priv))
+ printk(KERN_WARNING
+ "%s: Ack! Speed (%d) is not 10/100/1000!\n",
+ dev->name, mii_info->speed);
break;
}
- printk(KERN_INFO "%s: Speed %dBT\n", dev->name,
- mii_info->speed);
+ if (netif_msg_link(priv))
+ printk(KERN_INFO "%s: Speed %dBT\n", dev->name,
+ mii_info->speed);
priv->oldspeed = mii_info->speed;
}
if (!priv->oldlink) {
- printk(KERN_INFO "%s: Link is up\n", dev->name);
+ if (netif_msg_link(priv))
+ printk(KERN_INFO "%s: Link is up\n", dev->name);
priv->oldlink = 1;
netif_carrier_on(dev);
netif_schedule(dev);
}
} else {
if (priv->oldlink) {
- printk(KERN_INFO "%s: Link is down\n", dev->name);
+ if (netif_msg_link(priv))
+ printk(KERN_INFO "%s: Link is down\n",
+ dev->name);
priv->oldlink = 0;
priv->oldspeed = 0;
priv->oldduplex = -1;
@@ -1664,8 +1941,9 @@ static void gfar_set_multi(struct net_device *dev)
u32 tempval;
if(dev->flags & IFF_PROMISC) {
- printk(KERN_INFO "%s: Entering promiscuous mode.\n",
- dev->name);
+ if (netif_msg_drv(priv))
+ printk(KERN_INFO "%s: Entering promiscuous mode.\n",
+ dev->name);
/* Set RCTRL to PROM */
tempval = gfar_read(&regs->rctrl);
tempval |= RCTRL_PROM;
@@ -1679,6 +1957,14 @@ static void gfar_set_multi(struct net_device *dev)
if(dev->flags & IFF_ALLMULTI) {
/* Set the hash to rx all multicast frames */
+ gfar_write(&regs->igaddr0, 0xffffffff);
+ gfar_write(&regs->igaddr1, 0xffffffff);
+ gfar_write(&regs->igaddr2, 0xffffffff);
+ gfar_write(&regs->igaddr3, 0xffffffff);
+ gfar_write(&regs->igaddr4, 0xffffffff);
+ gfar_write(&regs->igaddr5, 0xffffffff);
+ gfar_write(&regs->igaddr6, 0xffffffff);
+ gfar_write(&regs->igaddr7, 0xffffffff);
gfar_write(&regs->gaddr0, 0xffffffff);
gfar_write(&regs->gaddr1, 0xffffffff);
gfar_write(&regs->gaddr2, 0xffffffff);
@@ -1689,6 +1975,14 @@ static void gfar_set_multi(struct net_device *dev)
gfar_write(&regs->gaddr7, 0xffffffff);
} else {
/* zero out the hash */
+ gfar_write(&regs->igaddr0, 0x0);
+ gfar_write(&regs->igaddr1, 0x0);
+ gfar_write(&regs->igaddr2, 0x0);
+ gfar_write(&regs->igaddr3, 0x0);
+ gfar_write(&regs->igaddr4, 0x0);
+ gfar_write(&regs->igaddr5, 0x0);
+ gfar_write(&regs->igaddr6, 0x0);
+ gfar_write(&regs->igaddr7, 0x0);
gfar_write(&regs->gaddr0, 0x0);
gfar_write(&regs->gaddr1, 0x0);
gfar_write(&regs->gaddr2, 0x0);
@@ -1727,16 +2021,15 @@ static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr)
{
u32 tempval;
struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regs = priv->regs;
- u32 *hash = &regs->gaddr0;
u32 result = ether_crc(MAC_ADDR_LEN, addr);
- u8 whichreg = ((result >> 29) & 0x7);
- u8 whichbit = ((result >> 24) & 0x1f);
+ int width = priv->hash_width;
+ u8 whichbit = (result >> (32 - width)) & 0x1f;
+ u8 whichreg = result >> (32 - width + 5);
u32 value = (1 << (31-whichbit));
- tempval = gfar_read(&hash[whichreg]);
+ tempval = gfar_read(priv->hash_regs[whichreg]);
tempval |= value;
- gfar_write(&hash[whichreg], tempval);
+ gfar_write(priv->hash_regs[whichreg], tempval);
return;
}
@@ -1754,10 +2047,9 @@ static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs)
gfar_write(&priv->regs->ievent, IEVENT_ERR_MASK);
/* Hmm... */
-#if defined (BRIEF_GFAR_ERRORS) || defined (VERBOSE_GFAR_ERRORS)
- printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n",
- dev->name, events, gfar_read(&priv->regs->imask));
-#endif
+ if (netif_msg_rx_err(priv) || netif_msg_tx_err(priv))
+ printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n",
+ dev->name, events, gfar_read(&priv->regs->imask));
/* Update the error counters */
if (events & IEVENT_TXE) {
@@ -1768,19 +2060,17 @@ static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs)
if (events & IEVENT_CRL)
priv->stats.tx_aborted_errors++;
if (events & IEVENT_XFUN) {
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_DEBUG "%s: underrun. packet dropped.\n",
- dev->name);
-#endif
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG "%s: underrun. packet dropped.\n",
+ dev->name);
priv->stats.tx_dropped++;
priv->extra_stats.tx_underrun++;
/* Reactivate the Tx Queues */
gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
}
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_DEBUG "%s: Transmit Error\n", dev->name);
-#endif
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG "%s: Transmit Error\n", dev->name);
}
if (events & IEVENT_BSY) {
priv->stats.rx_errors++;
@@ -1793,35 +2083,31 @@ static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs)
gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT);
#endif
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_DEBUG "%s: busy error (rhalt: %x)\n", dev->name,
- gfar_read(&priv->regs->rstat));
-#endif
+ if (netif_msg_rx_err(priv))
+ printk(KERN_DEBUG "%s: busy error (rhalt: %x)\n",
+ dev->name,
+ gfar_read(&priv->regs->rstat));
}
if (events & IEVENT_BABR) {
priv->stats.rx_errors++;
priv->extra_stats.rx_babr++;
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_DEBUG "%s: babbling error\n", dev->name);
-#endif
+ if (netif_msg_rx_err(priv))
+ printk(KERN_DEBUG "%s: babbling error\n", dev->name);
}
if (events & IEVENT_EBERR) {
priv->extra_stats.eberr++;
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_DEBUG "%s: EBERR\n", dev->name);
-#endif
+ if (netif_msg_rx_err(priv))
+ printk(KERN_DEBUG "%s: EBERR\n", dev->name);
}
- if (events & IEVENT_RXC)
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_DEBUG "%s: control frame\n", dev->name);
-#endif
+ if ((events & IEVENT_RXC) && netif_msg_rx_status(priv))
+ if (netif_msg_rx_status(priv))
+ printk(KERN_DEBUG "%s: control frame\n", dev->name);
if (events & IEVENT_BABT) {
priv->extra_stats.tx_babt++;
-#ifdef VERBOSE_GFAR_ERRORS
- printk(KERN_DEBUG "%s: babt error\n", dev->name);
-#endif
+ if (netif_msg_tx_err(priv))
+ printk(KERN_DEBUG "%s: babt error\n", dev->name);
}
return IRQ_HANDLED;
}
OpenPOWER on IntegriCloud