summaryrefslogtreecommitdiffstats
path: root/drivers/net/gianfar.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/gianfar.c')
-rw-r--r--drivers/net/gianfar.c152
1 files changed, 115 insertions, 37 deletions
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 28b53d1..27f0297 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -85,6 +85,7 @@
#include <linux/net_tstamp.h>
#include <asm/io.h>
+#include <asm/reg.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <linux/module.h>
@@ -685,8 +686,8 @@ static int gfar_of_init(struct of_device *ofdev, struct net_device **pdev)
priv->rx_queue[i] = NULL;
for (i = 0; i < priv->num_tx_queues; i++) {
- priv->tx_queue[i] = (struct gfar_priv_tx_q *)kzalloc(
- sizeof (struct gfar_priv_tx_q), GFP_KERNEL);
+ priv->tx_queue[i] = kzalloc(sizeof(struct gfar_priv_tx_q),
+ GFP_KERNEL);
if (!priv->tx_queue[i]) {
err = -ENOMEM;
goto tx_alloc_failed;
@@ -698,8 +699,8 @@ static int gfar_of_init(struct of_device *ofdev, struct net_device **pdev)
}
for (i = 0; i < priv->num_rx_queues; i++) {
- priv->rx_queue[i] = (struct gfar_priv_rx_q *)kzalloc(
- sizeof (struct gfar_priv_rx_q), GFP_KERNEL);
+ priv->rx_queue[i] = kzalloc(sizeof(struct gfar_priv_rx_q),
+ GFP_KERNEL);
if (!priv->rx_queue[i]) {
err = -ENOMEM;
goto rx_alloc_failed;
@@ -846,7 +847,7 @@ static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
if (!priv->phydev)
return -ENODEV;
- return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
+ return phy_mii_ioctl(priv->phydev, rq, cmd);
}
static unsigned int reverse_bitmap(unsigned int bit_map, unsigned int max_qs)
@@ -928,6 +929,34 @@ static void gfar_init_filer_table(struct gfar_private *priv)
}
}
+static void gfar_detect_errata(struct gfar_private *priv)
+{
+ struct device *dev = &priv->ofdev->dev;
+ unsigned int pvr = mfspr(SPRN_PVR);
+ unsigned int svr = mfspr(SPRN_SVR);
+ unsigned int mod = (svr >> 16) & 0xfff6; /* w/o E suffix */
+ unsigned int rev = svr & 0xffff;
+
+ /* MPC8313 Rev 2.0 and higher; All MPC837x */
+ if ((pvr == 0x80850010 && mod == 0x80b0 && rev >= 0x0020) ||
+ (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
+ priv->errata |= GFAR_ERRATA_74;
+
+ /* MPC8313 and MPC837x all rev */
+ if ((pvr == 0x80850010 && mod == 0x80b0) ||
+ (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
+ priv->errata |= GFAR_ERRATA_76;
+
+ /* MPC8313 and MPC837x all rev */
+ if ((pvr == 0x80850010 && mod == 0x80b0) ||
+ (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
+ priv->errata |= GFAR_ERRATA_A002;
+
+ if (priv->errata)
+ dev_info(dev, "enabled errata workarounds, flags: 0x%x\n",
+ priv->errata);
+}
+
/* Set up the ethernet device structure, private data,
* and anything else we need before we start */
static int gfar_probe(struct of_device *ofdev,
@@ -960,6 +989,8 @@ static int gfar_probe(struct of_device *ofdev,
dev_set_drvdata(&ofdev->dev, priv);
regs = priv->gfargrp[0].regs;
+ gfar_detect_errata(priv);
+
/* Stop the DMA engine now, in case it was running before */
/* (The firmware could have used it, and left it running). */
gfar_halt(dev);
@@ -974,7 +1005,10 @@ static int gfar_probe(struct of_device *ofdev,
gfar_write(&regs->maccfg1, tempval);
/* Initialize MACCFG2. */
- gfar_write(&regs->maccfg2, MACCFG2_INIT_SETTINGS);
+ tempval = MACCFG2_INIT_SETTINGS;
+ if (gfar_has_errata(priv, GFAR_ERRATA_74))
+ tempval |= MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK;
+ gfar_write(&regs->maccfg2, tempval);
/* Initialize ECNTRL */
gfar_write(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
@@ -1541,6 +1575,29 @@ static void init_registers(struct net_device *dev)
gfar_write(&regs->minflr, MINFLR_INIT_SETTINGS);
}
+static int __gfar_is_rx_idle(struct gfar_private *priv)
+{
+ u32 res;
+
+ /*
+ * Normaly TSEC should not hang on GRS commands, so we should
+ * actually wait for IEVENT_GRSC flag.
+ */
+ if (likely(!gfar_has_errata(priv, GFAR_ERRATA_A002)))
+ return 0;
+
+ /*
+ * Read the eTSEC register at offset 0xD1C. If bits 7-14 are
+ * the same as bits 23-30, the eTSEC Rx is assumed to be idle
+ * and the Rx can be safely reset.
+ */
+ res = gfar_read((void __iomem *)priv->gfargrp[0].regs + 0xd1c);
+ res &= 0x7f807f80;
+ if ((res & 0xffff) == (res >> 16))
+ return 1;
+
+ return 0;
+}
/* Halt the receive and transmit queues */
static void gfar_halt_nodisable(struct net_device *dev)
@@ -1564,12 +1621,18 @@ static void gfar_halt_nodisable(struct net_device *dev)
tempval = gfar_read(&regs->dmactrl);
if ((tempval & (DMACTRL_GRS | DMACTRL_GTS))
!= (DMACTRL_GRS | DMACTRL_GTS)) {
+ int ret;
+
tempval |= (DMACTRL_GRS | DMACTRL_GTS);
gfar_write(&regs->dmactrl, tempval);
- spin_event_timeout(((gfar_read(&regs->ievent) &
- (IEVENT_GRSC | IEVENT_GTSC)) ==
- (IEVENT_GRSC | IEVENT_GTSC)), -1, 0);
+ do {
+ ret = spin_event_timeout(((gfar_read(&regs->ievent) &
+ (IEVENT_GRSC | IEVENT_GTSC)) ==
+ (IEVENT_GRSC | IEVENT_GTSC)), 1000000, 0);
+ if (!ret && !(gfar_read(&regs->ievent) & IEVENT_GRSC))
+ ret = __gfar_is_rx_idle(priv);
+ } while (!ret);
}
}
@@ -1987,6 +2050,20 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
unsigned int nr_frags, nr_txbds, length;
union skb_shared_tx *shtx;
+ /*
+ * TOE=1 frames larger than 2500 bytes may see excess delays
+ * before start of transmission.
+ */
+ if (unlikely(gfar_has_errata(priv, GFAR_ERRATA_76) &&
+ skb->ip_summed == CHECKSUM_PARTIAL &&
+ skb->len > 2500)) {
+ int ret;
+
+ ret = skb_checksum_help(skb);
+ if (ret)
+ return ret;
+ }
+
rq = skb->queue_mapping;
tx_queue = priv->tx_queue[rq];
txq = netdev_get_tx_queue(dev, rq);
@@ -2300,7 +2377,8 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
* to allow huge frames, and to check the length */
tempval = gfar_read(&regs->maccfg2);
- if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE)
+ if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE ||
+ gfar_has_errata(priv, GFAR_ERRATA_74))
tempval |= (MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
else
tempval &= ~(MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
@@ -2342,6 +2420,15 @@ static void gfar_timeout(struct net_device *dev)
schedule_work(&priv->reset_task);
}
+static void gfar_align_skb(struct sk_buff *skb)
+{
+ /* We need the data buffer to be aligned properly. We will reserve
+ * as many bytes as needed to align the data properly
+ */
+ skb_reserve(skb, RXBUF_ALIGNMENT -
+ (((unsigned long) skb->data) & (RXBUF_ALIGNMENT - 1)));
+}
+
/* Interrupt Handler for Transmit complete */
static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue)
{
@@ -2426,9 +2513,10 @@ static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue)
*/
if (skb_queue_len(&priv->rx_recycle) < rx_queue->rx_ring_size &&
skb_recycle_check(skb, priv->rx_buffer_size +
- RXBUF_ALIGNMENT))
+ RXBUF_ALIGNMENT)) {
+ gfar_align_skb(skb);
__skb_queue_head(&priv->rx_recycle, skb);
- else
+ } else
dev_kfree_skb_any(skb);
tx_queue->tx_skbuff[skb_dirtytx] = NULL;
@@ -2491,29 +2579,28 @@ static void gfar_new_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp,
gfar_init_rxbdp(rx_queue, bdp, buf);
}
-
-struct sk_buff * gfar_new_skb(struct net_device *dev)
+static struct sk_buff * gfar_alloc_skb(struct net_device *dev)
{
- unsigned int alignamount;
struct gfar_private *priv = netdev_priv(dev);
struct sk_buff *skb = NULL;
- skb = __skb_dequeue(&priv->rx_recycle);
- if (!skb)
- skb = netdev_alloc_skb(dev,
- priv->rx_buffer_size + RXBUF_ALIGNMENT);
-
+ skb = netdev_alloc_skb(dev, priv->rx_buffer_size + RXBUF_ALIGNMENT);
if (!skb)
return NULL;
- alignamount = RXBUF_ALIGNMENT -
- (((unsigned long) skb->data) & (RXBUF_ALIGNMENT - 1));
+ gfar_align_skb(skb);
- /* We need the data buffer to be aligned properly. We will reserve
- * as many bytes as needed to align the data properly
- */
- skb_reserve(skb, alignamount);
- GFAR_CB(skb)->alignamount = alignamount;
+ return skb;
+}
+
+struct sk_buff * gfar_new_skb(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ struct sk_buff *skb = NULL;
+
+ skb = __skb_dequeue(&priv->rx_recycle);
+ if (!skb)
+ skb = gfar_alloc_skb(dev);
return skb;
}
@@ -2666,17 +2753,8 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit)
if (unlikely(!newskb))
newskb = skb;
- else if (skb) {
- /*
- * We need to un-reserve() the skb to what it
- * was before gfar_new_skb() re-aligned
- * it to an RXBUF_ALIGNMENT boundary
- * before we put the skb back on the
- * recycle list.
- */
- skb_reserve(skb, -GFAR_CB(skb)->alignamount);
+ else if (skb)
__skb_queue_head(&priv->rx_recycle, skb);
- }
} else {
/* Increment the number of packets */
rx_queue->stats.rx_packets++;
OpenPOWER on IntegriCloud