summaryrefslogtreecommitdiffstats
path: root/drivers/net/fec.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/fec.c')
-rw-r--r--drivers/net/fec.c82
1 files changed, 41 insertions, 41 deletions
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 9eedb27..55d86bc 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -256,7 +256,7 @@ static mii_list_t *mii_free;
static mii_list_t *mii_head;
static mii_list_t *mii_tail;
-static int mii_queue(struct net_device *dev, int request,
+static int mii_queue(struct net_device *dev, int request,
void (*func)(uint, struct net_device *));
/* Make MII read/write commands for the FEC.
@@ -277,7 +277,7 @@ static int mii_queue(struct net_device *dev, int request,
#define MII_REG_SR 1 /* Status Register */
#define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */
#define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */
-#define MII_REG_ANAR 4 /* A-N Advertisement Register */
+#define MII_REG_ANAR 4 /* A-N Advertisement Register */
#define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */
#define MII_REG_ANER 6 /* A-N Expansion Register */
#define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */
@@ -289,18 +289,18 @@ static int mii_queue(struct net_device *dev, int request,
#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */
#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */
#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
+#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
+#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */
#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */
#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */
#define PHY_STAT_SPMASK 0xf000 /* mask for speed */
#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */
-#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
+#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
+#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
static int
@@ -360,7 +360,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
fep->stats.tx_bytes += skb->len;
fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK;
-
+
/* Push the data cache so the CPM does not get stale memory
* data.
*/
@@ -422,7 +422,7 @@ fec_timeout(struct net_device *dev)
bdp = fep->tx_bd_base;
printk(" tx: %u buffers\n", TX_RING_SIZE);
for (i = 0 ; i < TX_RING_SIZE; i++) {
- printk(" %08x: %04x %04x %08x\n",
+ printk(" %08x: %04x %04x %08x\n",
(uint) bdp,
bdp->cbd_sc,
bdp->cbd_datlen,
@@ -484,7 +484,7 @@ fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs)
handled = 1;
fec_enet_mii(dev);
}
-
+
}
return IRQ_RETVAL(handled);
}
@@ -534,20 +534,20 @@ fec_enet_tx(struct net_device *dev)
*/
if (status & BD_ENET_TX_DEF)
fep->stats.collisions++;
-
+
/* Free the sk buffer associated with this last transmit.
*/
dev_kfree_skb_any(skb);
fep->tx_skbuff[fep->skb_dirty] = NULL;
fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
+
/* Update pointer to next buffer descriptor to be transmitted.
*/
if (status & BD_ENET_TX_WRAP)
bdp = fep->tx_bd_base;
else
bdp++;
-
+
/* Since we have freed up a buffer, the ring is no longer
* full.
*/
@@ -577,10 +577,10 @@ fec_enet_rx(struct net_device *dev)
struct sk_buff *skb;
ushort pkt_len;
__u8 *data;
-
+
#ifdef CONFIG_M532x
flush_cache_all();
-#endif
+#endif
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
@@ -606,7 +606,7 @@ while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
/* Check for errors. */
if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
BD_ENET_RX_CR | BD_ENET_RX_OV)) {
- fep->stats.rx_errors++;
+ fep->stats.rx_errors++;
if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
/* Frame too long or too short. */
fep->stats.rx_length_errors++;
@@ -670,7 +670,7 @@ while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
bdp = fep->rx_bd_base;
else
bdp++;
-
+
#if 1
/* Doing this here will keep the FEC running while we process
* incoming frames. On a heavily loaded network, we should be
@@ -708,7 +708,7 @@ fec_enet_mii(struct net_device *dev)
mii_reg = ep->fec_mii_data;
spin_lock(&fep->lock);
-
+
if ((mip = mii_head) == NULL) {
printk("MII and no head!\n");
goto unlock;
@@ -886,14 +886,14 @@ static phy_cmd_t const phy_cmd_lxt970_shutdown[] = { /* disable interrupts */
{ mk_mii_end, }
};
static phy_info_t const phy_info_lxt970 = {
- .id = 0x07810000,
+ .id = 0x07810000,
.name = "LXT970",
.config = phy_cmd_lxt970_config,
.startup = phy_cmd_lxt970_startup,
.ack_int = phy_cmd_lxt970_ack_int,
.shutdown = phy_cmd_lxt970_shutdown
};
-
+
/* ------------------------------------------------------------------------- */
/* The Level one LXT971 is used on some of my custom boards */
@@ -906,7 +906,7 @@ static phy_info_t const phy_info_lxt970 = {
#define MII_LXT971_LCR 20 /* LED Control Register */
#define MII_LXT971_TCR 30 /* Transmit Control Register */
-/*
+/*
* I had some nice ideas of running the MDIO faster...
* The 971 should support 8MHz and I tried it, but things acted really
* weird, so 2.5 MHz ought to be enough for anyone...
@@ -944,9 +944,9 @@ static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev)
*s = status;
}
-
+
static phy_cmd_t const phy_cmd_lxt971_config[] = {
- /* limit to 10MBit because my prototype board
+ /* limit to 10MBit because my prototype board
* doesn't work with 100. */
{ mk_mii_read(MII_REG_CR), mii_parse_cr },
{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
@@ -960,7 +960,7 @@ static phy_cmd_t const phy_cmd_lxt971_startup[] = { /* enable interrupts */
/* Somehow does the 971 tell me that the link is down
* the first read after power-up.
* read here to get a valid value in ack_int */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
{ mk_mii_end, }
};
static phy_cmd_t const phy_cmd_lxt971_ack_int[] = {
@@ -976,7 +976,7 @@ static phy_cmd_t const phy_cmd_lxt971_shutdown[] = { /* disable interrupts */
{ mk_mii_end, }
};
static phy_info_t const phy_info_lxt971 = {
- .id = 0x0001378e,
+ .id = 0x0001378e,
.name = "LXT971",
.config = phy_cmd_lxt971_config,
.startup = phy_cmd_lxt971_startup,
@@ -1015,7 +1015,7 @@ static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev)
}
static phy_cmd_t const phy_cmd_qs6612_config[] = {
- /* The PHY powers up isolated on the RPX,
+ /* The PHY powers up isolated on the RPX,
* so send a command to allow operation.
*/
{ mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
@@ -1045,7 +1045,7 @@ static phy_cmd_t const phy_cmd_qs6612_shutdown[] = { /* disable interrupts */
{ mk_mii_end, }
};
static phy_info_t const phy_info_qs6612 = {
- .id = 0x00181440,
+ .id = 0x00181440,
.name = "QS6612",
.config = phy_cmd_qs6612_config,
.startup = phy_cmd_qs6612_startup,
@@ -1093,7 +1093,7 @@ static phy_cmd_t const phy_cmd_am79c874_config[] = {
static phy_cmd_t const phy_cmd_am79c874_startup[] = { /* enable interrupts */
{ mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL },
{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
{ mk_mii_end, }
};
static phy_cmd_t const phy_cmd_am79c874_ack_int[] = {
@@ -1135,7 +1135,7 @@ static phy_cmd_t const phy_cmd_ks8721bl_config[] = {
static phy_cmd_t const phy_cmd_ks8721bl_startup[] = { /* enable interrupts */
{ mk_mii_write(MII_KS8721BL_ICSR, 0xff00), NULL },
{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
{ mk_mii_end, }
};
static phy_cmd_t const phy_cmd_ks8721bl_ack_int[] = {
@@ -1150,7 +1150,7 @@ static phy_cmd_t const phy_cmd_ks8721bl_shutdown[] = { /* disable interrupts */
{ mk_mii_end, }
};
static phy_info_t const phy_info_ks8721bl = {
- .id = 0x00022161,
+ .id = 0x00022161,
.name = "KS8721BL",
.config = phy_cmd_ks8721bl_config,
.startup = phy_cmd_ks8721bl_startup,
@@ -1420,7 +1420,7 @@ static void __inline__ fec_request_intrs(struct net_device *dev)
{
volatile u16 *gpio_paspar;
volatile u8 *gpio_pehlpar;
-
+
gpio_paspar = (volatile u16 *) (MCF_IPSBAR + 0x100056);
gpio_pehlpar = (volatile u16 *) (MCF_IPSBAR + 0x100058);
*gpio_paspar |= 0x0f00;
@@ -1667,7 +1667,7 @@ static void __inline__ fec_request_intrs(struct net_device *dev)
/* Setup interrupt handlers. */
for (idp = id; idp->name; idp++) {
if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n",
+ printk("FEC: Could not allocate %s IRQ(%d)!\n",
idp->name, b+idp->irq);
}
@@ -1856,10 +1856,10 @@ static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_priva
immap->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
else
immap->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
-
+
/* Set MII speed to 2.5 MHz
*/
- fecp->fec_mii_speed = fep->phy_speed =
+ fecp->fec_mii_speed = fep->phy_speed =
((bd->bi_busfreq * 1000000) / 2500000) & 0x7e;
}
@@ -1869,7 +1869,7 @@ static void __inline__ fec_enable_phy_intr(void)
fecp = fep->hwp;
- /* Enable MII command finished interrupt
+ /* Enable MII command finished interrupt
*/
fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
}
@@ -1971,7 +1971,7 @@ static void mii_display_config(struct net_device *dev)
if (status & PHY_CONF_LOOP)
printk(", loopback enabled");
-
+
printk(".\n");
fep->sequence_done = 1;
@@ -1993,7 +1993,7 @@ static void mii_relink(struct net_device *dev)
if (fep->link) {
duplex = 0;
- if (fep->phy_status
+ if (fep->phy_status
& (PHY_STAT_100FDX | PHY_STAT_10FDX))
duplex = 1;
fec_restart(dev, duplex);
@@ -2070,7 +2070,7 @@ mii_discover_phy3(uint mii_reg, struct net_device *dev)
printk(" -- %s\n", phy_info[i]->name);
else
printk(" -- unknown PHY!\n");
-
+
fep->phy = phy_info[i];
fep->phy_id_done = 1;
}
@@ -2090,7 +2090,7 @@ mii_discover_phy(uint mii_reg, struct net_device *dev)
if (fep->phy_addr < 32) {
if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) {
-
+
/* Got first part of ID, now get remainder.
*/
fep->phy_id = phytype << 16;
@@ -2243,7 +2243,7 @@ static void set_multicast_list(struct net_device *dev)
*/
ep->fec_hash_table_high = 0;
ep->fec_hash_table_low = 0;
-
+
dmi = dev->mc_list;
for (j = 0; j < dev->mc_count; j++, dmi = dmi->next)
@@ -2252,7 +2252,7 @@ static void set_multicast_list(struct net_device *dev)
*/
if (!(dmi->dmi_addr[0] & 1))
continue;
-
+
/* calculate crc32 value of mac address
*/
crc = 0xffffffff;
@@ -2271,7 +2271,7 @@ static void set_multicast_list(struct net_device *dev)
which point to specific bit in he hash registers
*/
hash = (crc >> (32 - HASH_BITS)) & 0x3f;
-
+
if (hash > 31)
ep->fec_hash_table_high |= 1 << (hash - 32);
else
OpenPOWER on IntegriCloud