summaryrefslogtreecommitdiffstats
path: root/drivers/net/ewrk3.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ewrk3.c')
-rw-r--r--drivers/net/ewrk3.c60
1 files changed, 30 insertions, 30 deletions
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
index b987f94..78a1c42 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ewrk3.c
@@ -359,13 +359,13 @@ struct net_device * __init ewrk3_probe(int unit)
SET_MODULE_OWNER(dev);
err = ewrk3_probe1(dev, dev->base_addr, dev->irq);
- if (err)
+ if (err)
goto out;
return dev;
out:
free_netdev(dev);
return ERR_PTR(err);
-
+
}
#endif
@@ -378,7 +378,7 @@ static int __init ewrk3_probe1(struct net_device *dev, u_long iobase, int irq)
/* Address PROM pattern */
err = isa_probe(dev, iobase);
- if (err != 0)
+ if (err != 0)
err = eisa_probe(dev, iobase);
if (err)
@@ -391,7 +391,7 @@ static int __init ewrk3_probe1(struct net_device *dev, u_long iobase, int irq)
return err;
}
-static int __init
+static int __init
ewrk3_hw_init(struct net_device *dev, u_long iobase)
{
struct ewrk3_private *lp;
@@ -435,19 +435,19 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase)
printk("%s: Device has a bad on-board EEPROM.\n", dev->name);
return -ENXIO;
}
-
+
EthwrkSignature(name, eeprom_image);
- if (*name == '\0')
+ if (*name == '\0')
return -ENXIO;
dev->base_addr = iobase;
-
+
if (iobase > 0x400) {
outb(eisa_cr, EISA_CR); /* Rewrite the EISA CR */
}
lemac = eeprom_image[EEPROM_CHIPVER];
cmr = inb(EWRK3_CMR);
-
+
if (((lemac == LeMAC) && ((cmr & CMR_NO_EEPROM) != CMR_NO_EEPROM)) ||
((lemac == LeMAC2) && !(cmr & CMR_HS))) {
printk("%s: %s at %#4lx", dev->name, name, iobase);
@@ -468,7 +468,7 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase)
printk("%2.2x:", dev->dev_addr[i]);
}
printk("%2.2x,\n", dev->dev_addr[i]);
-
+
if (status) {
printk(" which has an EEPROM CRC error.\n");
return -ENXIO;
@@ -490,7 +490,7 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase)
if (eeprom_image[EEPROM_SETUP] & SETUP_DRAM)
cmr |= CMR_DRAM;
outb(cmr, EWRK3_CMR);
-
+
cr = inb(EWRK3_CR); /* Set up the Control Register */
cr |= eeprom_image[EEPROM_SETUP] & SETUP_APD;
if (cr & SETUP_APD)
@@ -524,7 +524,7 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase)
** uncommenting this line.
*/
/* FORCE_2K_MODE; */
-
+
if (hard_strapped) {
printk(" is hard strapped.\n");
} else if (mem_start) {
@@ -544,44 +544,44 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase)
lp->hard_strapped = hard_strapped;
lp->led_mask = CR_LED;
spin_lock_init(&lp->hw_lock);
-
+
lp->mPage = 64;
if (cmr & CMR_DRAM)
lp->mPage <<= 1; /* 2 DRAMS on module */
-
+
sprintf(lp->adapter_name, "%s (%s)", name, dev->name);
-
+
lp->irq_mask = ICR_TNEM | ICR_TXDM | ICR_RNEM | ICR_RXDM;
-
+
if (!hard_strapped) {
/*
** Enable EWRK3 board interrupts for autoprobing
*/
icr |= ICR_IE; /* Enable interrupts */
outb(icr, EWRK3_ICR);
-
+
/* The DMA channel may be passed in on this parameter. */
dev->dma = 0;
-
+
/* To auto-IRQ we enable the initialization-done and DMA err,
interrupts. For now we will always get a DMA error. */
if (dev->irq < 2) {
#ifndef MODULE
u_char irqnum;
unsigned long irq_mask;
-
+
irq_mask = probe_irq_on();
-
+
/*
** Trigger a TNE interrupt.
*/
icr |= ICR_TNEM;
outb(1, EWRK3_TDQ); /* Write to the TX done queue */
outb(icr, EWRK3_ICR); /* Unmask the TXD interrupt */
-
+
irqnum = irq[((icr & IRQ_SEL) >> 4)];
-
+
mdelay(20);
dev->irq = probe_irq_off(irq_mask);
if ((dev->irq) && (irqnum == dev->irq)) {
@@ -622,12 +622,12 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase)
SET_ETHTOOL_OPS(dev, &ethtool_ops);
dev->tx_timeout = ewrk3_timeout;
dev->watchdog_timeo = QUEUE_PKT_TIMEOUT;
-
+
dev->mem_start = 0;
return 0;
}
-
+
static int ewrk3_open(struct net_device *dev)
{
@@ -732,14 +732,14 @@ static void ewrk3_init(struct net_device *dev)
/*
* Transmit timeout
*/
-
+
static void ewrk3_timeout(struct net_device *dev)
{
struct ewrk3_private *lp = netdev_priv(dev);
u_char icr, csr;
u_long iobase = dev->base_addr;
-
- if (!lp->hard_strapped)
+
+ if (!lp->hard_strapped)
{
printk(KERN_WARNING"%s: transmit timed/locked out, status %04x, resetting.\n",
dev->name, inb(EWRK3_CSR));
@@ -1108,7 +1108,7 @@ static int ewrk3_close(struct net_device *dev)
u_char icr, csr;
netif_stop_queue(dev);
-
+
if (ewrk3_debug > 1) {
printk("%s: Shutting down ethercard, status was %2.2x.\n",
dev->name, inb(EWRK3_CSR));
@@ -1697,7 +1697,7 @@ static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
u_char addr[HASH_TABLE_LEN * ETH_ALEN];
u_short val[(HASH_TABLE_LEN * ETH_ALEN) >> 1];
};
-
+
union ewrk3_addr *tmp;
/* All we handle are private IOCTLs */
@@ -1717,7 +1717,7 @@ static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
if (copy_to_user(ioc->data, tmp->addr, ioc->len))
status = -EFAULT;
break;
-
+
case EWRK3_SET_HWADDR: /* Set the hardware address */
if (capable(CAP_NET_ADMIN)) {
spin_lock_irqsave(&lp->hw_lock, flags);
@@ -1990,7 +1990,7 @@ module_init(ewrk3_init_module);
#endif /* MODULE */
MODULE_LICENSE("GPL");
-
+
/*
* Local variables:
OpenPOWER on IntegriCloud