diff options
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 60 |
1 files changed, 52 insertions, 8 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 940ef85..5523da3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -127,6 +127,17 @@ MODULE_PARM_DESC(debug, " Default debug msglevel"); struct workqueue_struct *bnx2x_wq; +struct bnx2x_mac_vals { + u32 xmac_addr; + u32 xmac_val; + u32 emac_addr; + u32 emac_val; + u32 umac_addr; + u32 umac_val; + u32 bmac_addr; + u32 bmac_val[2]; +}; + enum bnx2x_board_type { BCM57710 = 0, BCM57711, @@ -9420,12 +9431,19 @@ static inline void bnx2x_undi_int_disable(struct bnx2x *bp) bnx2x_undi_int_disable_e1h(bp); } -static void bnx2x_prev_unload_close_mac(struct bnx2x *bp) +static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, + struct bnx2x_mac_vals *vals) { u32 val, base_addr, offset, mask, reset_reg; bool mac_stopped = false; u8 port = BP_PORT(bp); + /* reset addresses as they also mark which values were changed */ + vals->bmac_addr = 0; + vals->umac_addr = 0; + vals->xmac_addr = 0; + vals->emac_addr = 0; + reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2); if (!CHIP_IS_E3(bp)) { @@ -9447,14 +9465,18 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp) */ wb_data[0] = REG_RD(bp, base_addr + offset); wb_data[1] = REG_RD(bp, base_addr + offset + 0x4); + vals->bmac_addr = base_addr + offset; + vals->bmac_val[0] = wb_data[0]; + vals->bmac_val[1] = wb_data[1]; wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE; - REG_WR(bp, base_addr + offset, wb_data[0]); - REG_WR(bp, base_addr + offset + 0x4, wb_data[1]); + REG_WR(bp, vals->bmac_addr, wb_data[0]); + REG_WR(bp, vals->bmac_addr + 0x4, wb_data[1]); } BNX2X_DEV_INFO("Disable emac Rx\n"); - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4, 0); - + vals->emac_addr = NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4; + vals->emac_val = REG_RD(bp, vals->emac_addr); + REG_WR(bp, vals->emac_addr, 0); mac_stopped = true; } else { if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) { @@ -9465,14 +9487,18 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp) val & ~(1 << 1)); REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI, val | (1 << 1)); - REG_WR(bp, base_addr + XMAC_REG_CTRL, 0); + vals->xmac_addr = base_addr + XMAC_REG_CTRL; + vals->xmac_val = REG_RD(bp, vals->xmac_addr); + REG_WR(bp, vals->xmac_addr, 0); mac_stopped = true; } mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port; if (mask & reset_reg) { BNX2X_DEV_INFO("Disable umac Rx\n"); base_addr = BP_PORT(bp) ? GRCBASE_UMAC1 : GRCBASE_UMAC0; - REG_WR(bp, base_addr + UMAC_REG_COMMAND_CONFIG, 0); + vals->umac_addr = base_addr + UMAC_REG_COMMAND_CONFIG; + vals->umac_val = REG_RD(bp, vals->umac_addr); + REG_WR(bp, vals->umac_addr, 0); mac_stopped = true; } } @@ -9664,12 +9690,16 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) { u32 reset_reg, tmp_reg = 0, rc; bool prev_undi = false; + struct bnx2x_mac_vals mac_vals; + /* It is possible a previous function received 'common' answer, * but hasn't loaded yet, therefore creating a scenario of * multiple functions receiving 'common' on the same path. */ BNX2X_DEV_INFO("Common unload Flow\n"); + memset(&mac_vals, 0, sizeof(mac_vals)); + if (bnx2x_prev_is_path_marked(bp)) return bnx2x_prev_mcp_done(bp); @@ -9680,7 +9710,10 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) u32 timer_count = 1000; /* Close the MAC Rx to prevent BRB from filling up */ - bnx2x_prev_unload_close_mac(bp); + bnx2x_prev_unload_close_mac(bp, &mac_vals); + + /* close LLH filters towards the BRB */ + bnx2x_set_rx_filter(&bp->link_params, 0); /* Check if the UNDI driver was previously loaded * UNDI driver initializes CID offset for normal bell to 0x7 @@ -9727,6 +9760,17 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) /* No packets are in the pipeline, path is ready for reset */ bnx2x_reset_common(bp); + if (mac_vals.xmac_addr) + REG_WR(bp, mac_vals.xmac_addr, mac_vals.xmac_val); + if (mac_vals.umac_addr) + REG_WR(bp, mac_vals.umac_addr, mac_vals.umac_val); + if (mac_vals.emac_addr) + REG_WR(bp, mac_vals.emac_addr, mac_vals.emac_val); + if (mac_vals.bmac_addr) { + REG_WR(bp, mac_vals.bmac_addr, mac_vals.bmac_val[0]); + REG_WR(bp, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]); + } + rc = bnx2x_prev_mark_path(bp, prev_undi); if (rc) { bnx2x_prev_mcp_done(bp); |