diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro')
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Kconfig | 72 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Makefile | 17 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/common.h | 13 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c | 4 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c | 17 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 4 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 4 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac.h | 77 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 211 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 84 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 68 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h | 28 |
13 files changed, 260 insertions, 341 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index b02d4a3..7d3af19 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -14,62 +14,20 @@ config STMMAC_ETH if STMMAC_ETH config STMMAC_PLATFORM - bool "STMMAC Platform bus support" + tristate "STMMAC Platform bus support" depends on STMMAC_ETH default y ---help--- - This selects the platform specific bus support for - the stmmac device driver. This is the driver used - on many embedded STM platforms based on ARM and SuperH - processors. + This selects the platform specific bus support for the stmmac driver. + This is the driver used on several SoCs: + STi, Allwinner, Amlogic Meson, Altera SOCFPGA. + If you have a controller with this interface, say Y or M here. If unsure, say N. -config DWMAC_MESON - bool "Amlogic Meson dwmac support" - depends on STMMAC_PLATFORM && ARCH_MESON - help - Support for Ethernet controller on Amlogic Meson SoCs. - - This selects the Amlogic Meson SoC glue layer support for - the stmmac device driver. This driver is used for Meson6 and - Meson8 SoCs. - -config DWMAC_SOCFPGA - bool "SOCFPGA dwmac support" - depends on STMMAC_PLATFORM && MFD_SYSCON && (ARCH_SOCFPGA || COMPILE_TEST) - help - Support for ethernet controller on Altera SOCFPGA - - This selects the Altera SOCFPGA SoC glue layer support - for the stmmac device driver. This driver is used for - arria5 and cyclone5 FPGA SoCs. - -config DWMAC_SUNXI - bool "Allwinner GMAC support" - depends on STMMAC_PLATFORM && ARCH_SUNXI - default y - ---help--- - Support for Allwinner A20/A31 GMAC ethernet controllers. - - This selects Allwinner SoC glue layer support for the - stmmac device driver. This driver is used for A20/A31 - GMAC ethernet controller. - -config DWMAC_STI - bool "STi GMAC support" - depends on STMMAC_PLATFORM && ARCH_STI - default y - ---help--- - Support for ethernet controller on STi SOCs. - - This selects STi SoC glue layer support for the stmmac - device driver. This driver is used on for the STi series - SOCs GMAC ethernet controller. - config STMMAC_PCI - bool "STMMAC PCI bus support" + tristate "STMMAC PCI bus support" depends on STMMAC_ETH && PCI ---help--- This is to select the Synopsys DWMAC available on PCI devices, @@ -79,22 +37,4 @@ config STMMAC_PCI D1215994A VIRTEX FPGA board. If unsure, say N. - -config STMMAC_DEBUG_FS - bool "Enable monitoring via sysFS " - default n - depends on STMMAC_ETH && DEBUG_FS - ---help--- - The stmmac entry in /sys reports DMA TX/RX rings - or (if supported) the HW cap register. - -config STMMAC_DA - bool "STMMAC DMA arbitration scheme" - default n - ---help--- - Selecting this option, rx has priority over Tx (only for Giga - Ethernet device). - By default, the DMA arbitration scheme is based on Round-robin - (rx:tx priority is 1:1). - endif diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile index 0533d0b..ac4d562 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Makefile +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile @@ -1,11 +1,12 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac.o -stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o -stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o -stmmac-$(CONFIG_DWMAC_MESON) += dwmac-meson.o -stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o -stmmac-$(CONFIG_DWMAC_STI) += dwmac-sti.o -stmmac-$(CONFIG_DWMAC_SOCFPGA) += dwmac-socfpga.o stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \ - chain_mode.o dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o \ - dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o \ + chain_mode.o dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o \ + dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o \ mmc_core.o stmmac_hwtstamp.o stmmac_ptp.o $(stmmac-y) + +obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o +stmmac-platform-objs:= stmmac_platform.o dwmac-meson.o dwmac-sunxi.o \ + dwmac-sti.o dwmac-socfpga.o + +obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o +stmmac-pci-objs:= stmmac_pci.o diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index 593e6c4..cd77289 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -44,6 +44,7 @@ #undef FRAME_FILTER_DEBUG /* #define FRAME_FILTER_DEBUG */ +/* Extra statistic and debug information exposed by ethtool */ struct stmmac_extra_stats { /* Transmit errors */ unsigned long tx_underflow ____cacheline_aligned; @@ -220,6 +221,7 @@ enum dma_irq_status { handle_tx = 0x8, }; +/* EEE and LPI defines */ #define CORE_IRQ_TX_PATH_IN_LPI_MODE (1 << 0) #define CORE_IRQ_TX_PATH_EXIT_LPI_MODE (1 << 1) #define CORE_IRQ_RX_PATH_IN_LPI_MODE (1 << 2) @@ -229,6 +231,7 @@ enum dma_irq_status { #define CORE_PCS_LINK_STATUS (1 << 6) #define CORE_RGMII_IRQ (1 << 7) +/* Physical Coding Sublayer */ struct rgmii_adv { unsigned int pause; unsigned int duplex; @@ -294,6 +297,7 @@ struct dma_features { #define JUMBO_LEN 9000 +/* Descriptors helpers */ struct stmmac_desc_ops { /* DMA RX descriptor ring initialization */ void (*init_rx_desc) (struct dma_desc *p, int disable_rx_ic, int mode, @@ -341,6 +345,10 @@ struct stmmac_desc_ops { int (*get_rx_timestamp_status) (void *desc, u32 ats); }; +extern const struct stmmac_desc_ops enh_desc_ops; +extern const struct stmmac_desc_ops ndesc_ops; + +/* Specific DMA helpers */ struct stmmac_dma_ops { /* DMA core initialization */ int (*init) (void __iomem *ioaddr, int pbl, int fb, int mb, @@ -370,6 +378,7 @@ struct stmmac_dma_ops { struct mac_device_info; +/* Helpers to program the MAC core */ struct stmmac_ops { /* MAC core initialization */ void (*core_init)(struct mac_device_info *hw, int mtu); @@ -400,6 +409,7 @@ struct stmmac_ops { void (*get_adv)(struct mac_device_info *hw, struct rgmii_adv *adv); }; +/* PTP and HW Timer helpers */ struct stmmac_hwtimestamp { void (*config_hw_tstamping) (void __iomem *ioaddr, u32 data); void (*config_sub_second_increment) (void __iomem *ioaddr); @@ -410,6 +420,8 @@ struct stmmac_hwtimestamp { u64(*get_systime) (void __iomem *ioaddr); }; +extern const struct stmmac_hwtimestamp stmmac_ptp; + struct mac_link { int port; int duplex; @@ -421,6 +433,7 @@ struct mii_regs { unsigned int data; /* MII Data */ }; +/* Helpers to manage the descriptors for chain and ring modes */ struct stmmac_mode_ops { void (*init) (void *des, dma_addr_t phy_addr, unsigned int size, unsigned int extend_desc); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c index d225a60..cca028d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c @@ -18,6 +18,8 @@ #include <linux/platform_device.h> #include <linux/stmmac.h> +#include "stmmac_platform.h" + #define ETHMAC_SPEED_100 BIT(1) struct meson_dwmac { @@ -56,7 +58,7 @@ static void *meson6_dwmac_setup(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 1); dwmac->reg = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(dwmac->reg)) - return dwmac->reg; + return ERR_CAST(dwmac->reg); return dwmac; } diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c index 3aad413..e97074c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -23,7 +23,9 @@ #include <linux/regmap.h> #include <linux/reset.h> #include <linux/stmmac.h> + #include "stmmac.h" +#include "stmmac_platform.h" #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1 diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c index ccfe7e5..0e13775 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c @@ -1,4 +1,4 @@ -/** +/* * dwmac-sti.c - STMicroelectronics DWMAC Specific Glue layer * * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited @@ -22,6 +22,8 @@ #include <linux/of.h> #include <linux/of_net.h> +#include "stmmac_platform.h" + #define DWMAC_125MHZ 125000000 #define DWMAC_50MHZ 50000000 #define DWMAC_25MHZ 25000000 @@ -35,9 +37,8 @@ #define IS_PHY_IF_MODE_GBIT(iface) (IS_PHY_IF_MODE_RGMII(iface) || \ iface == PHY_INTERFACE_MODE_GMII) -/* STiH4xx register definitions (STiH415/STiH416/STiH407/STiH410 families) */ - -/** +/* STiH4xx register definitions (STiH415/STiH416/STiH407/STiH410 families) + * * Below table summarizes the clock requirement and clock sources for * supported phy interface modes with link speeds. * ________________________________________________ @@ -76,9 +77,7 @@ #define STIH4XX_ETH_SEL_INTERNAL_NOTEXT_PHYCLK BIT(7) #define STIH4XX_ETH_SEL_TXCLK_NOT_CLK125 BIT(6) -/* STiD127 register definitions */ - -/** +/* STiD127 register definitions *----------------------- * src |BIT(6)| BIT(7)| *----------------------- @@ -104,13 +103,13 @@ #define EN_MASK GENMASK(1, 1) #define EN BIT(1) -/** +/* * 3 bits [4:2] * 000-GMII/MII * 001-RGMII * 010-SGMII * 100-RMII -*/ + */ #define MII_PHY_SEL_MASK GENMASK(4, 2) #define ETH_PHY_SEL_RMII BIT(4) #define ETH_PHY_SEL_SGMII BIT(3) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c index 771cd15..c5ea9ab 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c @@ -1,4 +1,4 @@ -/** +/* * dwmac-sunxi.c - Allwinner sunxi DWMAC specific glue layer * * Copyright (C) 2013 Chen-Yu Tsai @@ -22,6 +22,8 @@ #include <linux/of_net.h> #include <linux/regulator/consumer.h> +#include "stmmac_platform.h" + struct sunxi_priv_data { int interface; int clk_enabled; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index 0c2058a..59d92e8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -70,10 +70,6 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb, if (mb) value |= DMA_BUS_MODE_MB; -#ifdef CONFIG_STMMAC_DA - value |= DMA_BUS_MODE_DA; /* Rx has priority over tx */ -#endif - if (atds) value |= DMA_BUS_MODE_ATDS; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index c3c4065..c0a3919 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -122,9 +122,7 @@ int stmmac_mdio_unregister(struct net_device *ndev); int stmmac_mdio_register(struct net_device *ndev); int stmmac_mdio_reset(struct mii_bus *mii); void stmmac_set_ethtool_ops(struct net_device *netdev); -extern const struct stmmac_desc_ops enh_desc_ops; -extern const struct stmmac_desc_ops ndesc_ops; -extern const struct stmmac_hwtimestamp stmmac_ptp; + int stmmac_ptp_register(struct stmmac_priv *priv); void stmmac_ptp_unregister(struct stmmac_priv *priv); int stmmac_resume(struct net_device *ndev); @@ -136,77 +134,4 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, void stmmac_disable_eee_mode(struct stmmac_priv *priv); bool stmmac_eee_init(struct stmmac_priv *priv); -#ifdef CONFIG_STMMAC_PLATFORM -#ifdef CONFIG_DWMAC_MESON -extern const struct stmmac_of_data meson6_dwmac_data; -#endif -#ifdef CONFIG_DWMAC_SUNXI -extern const struct stmmac_of_data sun7i_gmac_data; -#endif -#ifdef CONFIG_DWMAC_STI -extern const struct stmmac_of_data stih4xx_dwmac_data; -extern const struct stmmac_of_data stid127_dwmac_data; -#endif -#ifdef CONFIG_DWMAC_SOCFPGA -extern const struct stmmac_of_data socfpga_gmac_data; -#endif -extern struct platform_driver stmmac_pltfr_driver; -static inline int stmmac_register_platform(void) -{ - int err; - - err = platform_driver_register(&stmmac_pltfr_driver); - if (err) - pr_err("stmmac: failed to register the platform driver\n"); - - return err; -} - -static inline void stmmac_unregister_platform(void) -{ - platform_driver_unregister(&stmmac_pltfr_driver); -} -#else -static inline int stmmac_register_platform(void) -{ - pr_debug("stmmac: do not register the platf driver\n"); - - return 0; -} - -static inline void stmmac_unregister_platform(void) -{ -} -#endif /* CONFIG_STMMAC_PLATFORM */ - -#ifdef CONFIG_STMMAC_PCI -extern struct pci_driver stmmac_pci_driver; -static inline int stmmac_register_pci(void) -{ - int err; - - err = pci_register_driver(&stmmac_pci_driver); - if (err) - pr_err("stmmac: failed to register the PCI driver\n"); - - return err; -} - -static inline void stmmac_unregister_pci(void) -{ - pci_unregister_driver(&stmmac_pci_driver); -} -#else -static inline int stmmac_register_pci(void) -{ - pr_debug("stmmac: do not register the PCI driver\n"); - - return 0; -} - -static inline void stmmac_unregister_pci(void) -{ -} -#endif /* CONFIG_STMMAC_PCI */ - #endif /* __STMMAC_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 18c46bb..118a427 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -44,10 +44,10 @@ #include <linux/slab.h> #include <linux/prefetch.h> #include <linux/pinctrl/consumer.h> -#ifdef CONFIG_STMMAC_DEBUG_FS +#ifdef CONFIG_DEBUG_FS #include <linux/debugfs.h> #include <linux/seq_file.h> -#endif /* CONFIG_STMMAC_DEBUG_FS */ +#endif /* CONFIG_DEBUG_FS */ #include <linux/net_tstamp.h> #include "stmmac_ptp.h" #include "stmmac.h" @@ -116,7 +116,7 @@ MODULE_PARM_DESC(chain_mode, "To use chain instead of ring mode"); static irqreturn_t stmmac_interrupt(int irq, void *dev_id); -#ifdef CONFIG_STMMAC_DEBUG_FS +#ifdef CONFIG_DEBUG_FS static int stmmac_init_fs(struct net_device *dev); static void stmmac_exit_fs(void); #endif @@ -125,8 +125,8 @@ static void stmmac_exit_fs(void); /** * stmmac_verify_args - verify the driver parameters. - * Description: it verifies if some wrong parameter is passed to the driver. - * Note that wrong parameters are replaced with the default values. + * Description: it checks the driver parameters and set a default in case of + * errors. */ static void stmmac_verify_args(void) { @@ -191,14 +191,8 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv) static void print_pkt(unsigned char *buf, int len) { - int j; - pr_debug("len = %d byte, buf addr: 0x%p", len, buf); - for (j = 0; j < len; j++) { - if ((j % 16) == 0) - pr_debug("\n %03x:", j); - pr_debug(" %02x", buf[j]); - } - pr_debug("\n"); + pr_debug("len = %d byte, buf addr: 0x%p\n", len, buf); + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); } /* minimum number of free TX descriptors required to wake up TX process */ @@ -210,7 +204,7 @@ static inline u32 stmmac_tx_avail(struct stmmac_priv *priv) } /** - * stmmac_hw_fix_mac_speed: callback for speed selection + * stmmac_hw_fix_mac_speed - callback for speed selection * @priv: driver private structure * Description: on some platforms (e.g. ST), some HW system configuraton * registers have to be set according to the link speed negotiated. @@ -224,9 +218,10 @@ static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv) } /** - * stmmac_enable_eee_mode: Check and enter in LPI mode + * stmmac_enable_eee_mode - check and enter in LPI mode * @priv: driver private structure - * Description: this function is to verify and enter in LPI mode for EEE. + * Description: this function is to verify and enter in LPI mode in case of + * EEE. */ static void stmmac_enable_eee_mode(struct stmmac_priv *priv) { @@ -237,7 +232,7 @@ static void stmmac_enable_eee_mode(struct stmmac_priv *priv) } /** - * stmmac_disable_eee_mode: disable/exit from EEE + * stmmac_disable_eee_mode - disable and exit from LPI mode * @priv: driver private structure * Description: this function is to exit and disable EEE in case of * LPI state is true. This is called by the xmit. @@ -250,7 +245,7 @@ void stmmac_disable_eee_mode(struct stmmac_priv *priv) } /** - * stmmac_eee_ctrl_timer: EEE TX SW timer. + * stmmac_eee_ctrl_timer - EEE TX SW timer. * @arg : data hook * Description: * if there is no data transfer and if we are not in LPI state, @@ -265,13 +260,12 @@ static void stmmac_eee_ctrl_timer(unsigned long arg) } /** - * stmmac_eee_init: init EEE + * stmmac_eee_init - init EEE * @priv: driver private structure * Description: - * If the EEE support has been enabled while configuring the driver, - * if the GMAC actually supports the EEE (from the HW cap reg) and the - * phy can also manage EEE, so enable the LPI state and start the timer - * to verify if the tx path can enter in LPI state. + * if the GMAC supports the EEE (from the HW cap reg) and the phy device + * can also manage EEE, this function enable the LPI state and start related + * timer. */ bool stmmac_eee_init(struct stmmac_priv *priv) { @@ -338,7 +332,7 @@ out: return ret; } -/* stmmac_get_tx_hwtstamp: get HW TX timestamps +/* stmmac_get_tx_hwtstamp - get HW TX timestamps * @priv: driver private structure * @entry : descriptor index to be used. * @skb : the socket buffer @@ -380,7 +374,7 @@ static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv, return; } -/* stmmac_get_rx_hwtstamp: get HW RX timestamps +/* stmmac_get_rx_hwtstamp - get HW RX timestamps * @priv: driver private structure * @entry : descriptor index to be used. * @skb : the socket buffer @@ -636,11 +630,11 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr) } /** - * stmmac_init_ptp: init PTP + * stmmac_init_ptp - init PTP * @priv: driver private structure - * Description: this is to verify if the HW supports the PTPv1 or v2. + * Description: this is to verify if the HW supports the PTPv1 or PTPv2. * This is done by looking at the HW cap. register. - * Also it registers the ptp driver. + * This function also registers the ptp driver. */ static int stmmac_init_ptp(struct stmmac_priv *priv) { @@ -682,9 +676,13 @@ static void stmmac_release_ptp(struct stmmac_priv *priv) } /** - * stmmac_adjust_link + * stmmac_adjust_link - adjusts the link parameters * @dev: net device structure - * Description: it adjusts the link parameters. + * Description: this is the helper called by the physical abstraction layer + * drivers to communicate the phy link status. According the speed and duplex + * this driver can invoke registered glue-logic as well. + * It also invoke the eee initialization because it could happen when switch + * on different networks (that are eee capable). */ static void stmmac_adjust_link(struct net_device *dev) { @@ -774,7 +772,7 @@ static void stmmac_adjust_link(struct net_device *dev) } /** - * stmmac_check_pcs_mode: verify if RGMII/SGMII is supported + * stmmac_check_pcs_mode - verify if RGMII/SGMII is supported * @priv: driver private structure * Description: this is to verify if the HW supports the PCS. * Physical Coding Sublayer (PCS) interface that can be used when the MAC is @@ -863,7 +861,7 @@ static int stmmac_init_phy(struct net_device *dev) } /** - * stmmac_display_ring: display ring + * stmmac_display_ring - display ring * @head: pointer to the head of the ring passed. * @size: size of the ring. * @extend_desc: to verify if extended descriptors are used. @@ -931,7 +929,7 @@ static int stmmac_set_bfsize(int mtu, int bufsize) } /** - * stmmac_clear_descriptors: clear descriptors + * stmmac_clear_descriptors - clear descriptors * @priv: driver private structure * Description: this function is called to clear the tx and rx descriptors * in case of both basic and extended descriptors are used. @@ -963,6 +961,15 @@ static void stmmac_clear_descriptors(struct stmmac_priv *priv) (i == txsize - 1)); } +/** + * stmmac_init_rx_buffers - init the RX descriptor buffer. + * @priv: driver private structure + * @p: descriptor pointer + * @i: descriptor index + * @flags: gfp flag. + * Description: this function is called to allocate a receive buffer, perform + * the DMA mapping and init the descriptor. + */ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p, int i, gfp_t flags) { @@ -1007,7 +1014,8 @@ static void stmmac_free_rx_buffers(struct stmmac_priv *priv, int i) /** * init_dma_desc_rings - init the RX/TX descriptor rings * @dev: net device structure - * Description: this function initializes the DMA RX/TX descriptors + * @flags: gfp flag. + * Description: this function initializes the DMA RX/TX descriptors * and allocates the socket buffers. It suppors the chained and ring * modes. */ @@ -1144,6 +1152,14 @@ static void dma_free_tx_skbufs(struct stmmac_priv *priv) } } +/** + * alloc_dma_desc_resources - alloc TX/RX resources. + * @priv: private structure + * Description: according to which descriptor can be used (extend or basic) + * this function allocates the resources for TX and RX paths. In case of + * reception, for example, it pre-allocated the RX socket buffer in order to + * allow zero-copy mechanism. + */ static int alloc_dma_desc_resources(struct stmmac_priv *priv) { unsigned int txsize = priv->dma_tx_size; @@ -1255,8 +1271,8 @@ static void free_dma_desc_resources(struct stmmac_priv *priv) /** * stmmac_dma_operation_mode - HW DMA operation mode * @priv: driver private structure - * Description: it sets the DMA operation mode: tx/rx DMA thresholds - * or Store-And-Forward capability. + * Description: it is used for configuring the DMA operation mode register in + * order to program the tx/rx DMA thresholds or Store-And-Forward mode. */ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) { @@ -1277,9 +1293,9 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) } /** - * stmmac_tx_clean: + * stmmac_tx_clean - to manage the transmission completion * @priv: driver private structure - * Description: it reclaims resources after transmission completes. + * Description: it reclaims the transmit resources after transmission completes. */ static void stmmac_tx_clean(struct stmmac_priv *priv) { @@ -1378,10 +1394,10 @@ static inline void stmmac_disable_dma_irq(struct stmmac_priv *priv) } /** - * stmmac_tx_err: irq tx error mng function + * stmmac_tx_err - to manage the tx error * @priv: driver private structure * Description: it cleans the descriptors and restarts the transmission - * in case of errors. + * in case of transmission errors. */ static void stmmac_tx_err(struct stmmac_priv *priv) { @@ -1409,12 +1425,11 @@ static void stmmac_tx_err(struct stmmac_priv *priv) } /** - * stmmac_dma_interrupt: DMA ISR + * stmmac_dma_interrupt - DMA ISR * @priv: driver private structure * Description: this is the DMA ISR. It is called by the main ISR. - * It calls the dwmac dma routine to understand which type of interrupt - * happened. In case of there is a Normal interrupt and either TX or RX - * interrupt happened so the NAPI is scheduled. + * It calls the dwmac dma routine and schedule poll method in case of some + * work can be done. */ static void stmmac_dma_interrupt(struct stmmac_priv *priv) { @@ -1457,6 +1472,12 @@ static void stmmac_mmc_setup(struct stmmac_priv *priv) pr_info(" No MAC Management Counters available\n"); } +/** + * stmmac_get_synopsys_id - return the SYINID. + * @priv: driver private structure + * Description: this simple function is to decode and return the SYINID + * starting from the HW core register. + */ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) { u32 hwid = priv->hw->synopsys_uid; @@ -1475,11 +1496,11 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) } /** - * stmmac_selec_desc_mode: to select among: normal/alternate/extend descriptors + * stmmac_selec_desc_mode - to select among: normal/alternate/extend descriptors * @priv: driver private structure * Description: select the Enhanced/Alternate or Normal descriptors. - * In case of Enhanced/Alternate, it looks at the extended descriptors are - * supported by the HW cap. register. + * In case of Enhanced/Alternate, it checks if the extended descriptors are + * supported by the HW capability register. */ static void stmmac_selec_desc_mode(struct stmmac_priv *priv) { @@ -1501,7 +1522,7 @@ static void stmmac_selec_desc_mode(struct stmmac_priv *priv) } /** - * stmmac_get_hw_features: get MAC capabilities from the HW cap. register. + * stmmac_get_hw_features - get MAC capabilities from the HW cap. register. * @priv: driver private structure * Description: * new GMAC chip generations have a new register to indicate the @@ -1559,7 +1580,7 @@ static int stmmac_get_hw_features(struct stmmac_priv *priv) } /** - * stmmac_check_ether_addr: check if the MAC addr is valid + * stmmac_check_ether_addr - check if the MAC addr is valid * @priv: driver private structure * Description: * it is to verify if the MAC address is valid, in case of failures it @@ -1578,7 +1599,7 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv) } /** - * stmmac_init_dma_engine: DMA init. + * stmmac_init_dma_engine - DMA init. * @priv: driver private structure * Description: * It inits the DMA invoking the specific MAC/GMAC callback. @@ -1607,7 +1628,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) } /** - * stmmac_tx_timer: mitigation sw timer for tx. + * stmmac_tx_timer - mitigation sw timer for tx. * @data: data pointer * Description: * This is the timer handler to directly invoke the stmmac_tx_clean. @@ -1620,7 +1641,7 @@ static void stmmac_tx_timer(unsigned long data) } /** - * stmmac_init_tx_coalesce: init tx mitigation options. + * stmmac_init_tx_coalesce - init tx mitigation options. * @priv: driver private structure * Description: * This inits the transmit coalesce parameters: i.e. timer rate, @@ -1639,10 +1660,13 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv) } /** - * stmmac_hw_setup: setup mac in a usable state. + * stmmac_hw_setup - setup mac in a usable state. * @dev : pointer to the device structure. * Description: - * This function sets up the ip in a usable state. + * this is the main function to setup the HW in a usable state because the + * dma engine is reset, the core registers are configured (e.g. AXI, + * Checksum features, timers). The DMA is ready to start receiving and + * transmitting. * Return value: * 0 on success and an appropriate (-)ve integer as defined in errno.h * file on failure. @@ -1688,7 +1712,7 @@ static int stmmac_hw_setup(struct net_device *dev) if (ret && ret != -EOPNOTSUPP) pr_warn("%s: failed PTP initialisation\n", __func__); -#ifdef CONFIG_STMMAC_DEBUG_FS +#ifdef CONFIG_DEBUG_FS ret = stmmac_init_fs(dev); if (ret < 0) pr_warn("%s: failed debugFS registration\n", __func__); @@ -1870,7 +1894,7 @@ static int stmmac_release(struct net_device *dev) netif_carrier_off(dev); -#ifdef CONFIG_STMMAC_DEBUG_FS +#ifdef CONFIG_DEBUG_FS stmmac_exit_fs(); #endif @@ -1880,7 +1904,7 @@ static int stmmac_release(struct net_device *dev) } /** - * stmmac_xmit: Tx entry point of the driver + * stmmac_xmit - Tx entry point of the driver * @skb : the socket buffer * @dev : device pointer * Description : this is the tx entry point of the driver. @@ -2055,7 +2079,7 @@ static void stmmac_rx_vlan(struct net_device *dev, struct sk_buff *skb) /** - * stmmac_rx_refill: refill used skb preallocated buffers + * stmmac_rx_refill - refill used skb preallocated buffers * @priv: driver private structure * Description : this is to reallocate the skb for the reception process * that is based on zero-copy. @@ -2106,7 +2130,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv) } /** - * stmmac_rx_refill: refill used skb preallocated buffers + * stmmac_rx - manage the receive process * @priv: driver private structure * @limit: napi bugget. * Description : this the function called by the napi poll method. @@ -2375,8 +2399,11 @@ static int stmmac_set_features(struct net_device *netdev, * @irq: interrupt number. * @dev_id: to pass the net device pointer. * Description: this is the main driver interrupt service routine. - * It calls the DMA ISR and also the core ISR to manage PMT, MMC, LPI - * interrupts. + * It can call: + * o DMA service routine (to manage incoming frame reception and transmission + * status) + * o Core interrupts to manage: remote wake-up, management counter, LPI + * interrupts. */ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) { @@ -2457,7 +2484,7 @@ static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return ret; } -#ifdef CONFIG_STMMAC_DEBUG_FS +#ifdef CONFIG_DEBUG_FS static struct dentry *stmmac_fs_dir; static struct dentry *stmmac_rings_status; static struct dentry *stmmac_dma_cap; @@ -2642,7 +2669,7 @@ static void stmmac_exit_fs(void) debugfs_remove(stmmac_dma_cap); debugfs_remove(stmmac_fs_dir); } -#endif /* CONFIG_STMMAC_DEBUG_FS */ +#endif /* CONFIG_DEBUG_FS */ static const struct net_device_ops stmmac_netdev_ops = { .ndo_open = stmmac_open, @@ -2663,11 +2690,10 @@ static const struct net_device_ops stmmac_netdev_ops = { /** * stmmac_hw_init - Init the MAC device * @priv: driver private structure - * Description: this function detects which MAC device - * (GMAC/MAC10-100) has to attached, checks the HW capability - * (if supported) and sets the driver's features (for example - * to use the ring or chaine mode or support the normal/enh - * descriptor structure). + * Description: this function is to configure the MAC device according to + * some platform parameters or the HW capability register. It prepares the + * driver to use either ring or chain modes and to setup either enhanced or + * normal descriptors. */ static int stmmac_hw_init(struct stmmac_priv *priv) { @@ -2891,6 +2917,7 @@ error_clk_get: return ERR_PTR(ret); } +EXPORT_SYMBOL_GPL(stmmac_dvr_probe); /** * stmmac_dvr_remove @@ -2920,8 +2947,15 @@ int stmmac_dvr_remove(struct net_device *ndev) return 0; } +EXPORT_SYMBOL_GPL(stmmac_dvr_remove); -#ifdef CONFIG_PM +/** + * stmmac_suspend - suspend callback + * @ndev: net device pointer + * Description: this is the function to suspend the device and it is called + * by the platform driver to stop the network queue, release the resources, + * program the PMT register (for WoL), clean and release driver resources. + */ int stmmac_suspend(struct net_device *ndev) { struct stmmac_priv *priv = netdev_priv(ndev); @@ -2963,7 +2997,14 @@ int stmmac_suspend(struct net_device *ndev) priv->oldduplex = -1; return 0; } +EXPORT_SYMBOL_GPL(stmmac_suspend); +/** + * stmmac_resume - resume callback + * @ndev: net device pointer + * Description: when resume this function is invoked to setup the DMA and CORE + * in a usable state. + */ int stmmac_resume(struct net_device *ndev) { struct stmmac_priv *priv = netdev_priv(ndev); @@ -3009,37 +3050,7 @@ int stmmac_resume(struct net_device *ndev) return 0; } -#endif /* CONFIG_PM */ - -/* Driver can be configured w/ and w/ both PCI and Platf drivers - * depending on the configuration selected. - */ -static int __init stmmac_init(void) -{ - int ret; - - ret = stmmac_register_platform(); - if (ret) - goto err; - ret = stmmac_register_pci(); - if (ret) - goto err_pci; - return 0; -err_pci: - stmmac_unregister_platform(); -err: - pr_err("stmmac: driver registration failed\n"); - return ret; -} - -static void __exit stmmac_exit(void) -{ - stmmac_unregister_platform(); - stmmac_unregister_pci(); -} - -module_init(stmmac_init); -module_exit(stmmac_exit); +EXPORT_SYMBOL_GPL(stmmac_resume); #ifndef MODULE static int __init stmmac_cmdline_opt(char *str) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index e17a970..77a6d68 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -71,64 +71,46 @@ static void stmmac_default_data(void) static int stmmac_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { - int ret = 0; - void __iomem *addr = NULL; - struct stmmac_priv *priv = NULL; + struct stmmac_priv *priv; int i; + int ret; /* Enable pci device */ - ret = pci_enable_device(pdev); + ret = pcim_enable_device(pdev); if (ret) { - pr_err("%s : ERROR: failed to enable %s device\n", __func__, - pci_name(pdev)); + dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", + __func__); return ret; } - if (pci_request_regions(pdev, STMMAC_RESOURCE_NAME)) { - pr_err("%s: ERROR: failed to get PCI region\n", __func__); - ret = -ENODEV; - goto err_out_req_reg_failed; - } /* Get the base address of device */ - for (i = 0; i <= 5; i++) { + for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { if (pci_resource_len(pdev, i) == 0) continue; - addr = pci_iomap(pdev, i, 0); - if (addr == NULL) { - pr_err("%s: ERROR: cannot map register memory aborting", - __func__); - ret = -EIO; - goto err_out_map_failed; - } + ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev)); + if (ret) + return ret; break; } + pci_set_master(pdev); stmmac_default_data(); - priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat, addr); + priv = stmmac_dvr_probe(&pdev->dev, &plat_dat, + pcim_iomap_table(pdev)[i]); if (IS_ERR(priv)) { - pr_err("%s: main driver probe failed", __func__); - ret = PTR_ERR(priv); - goto err_out; + dev_err(&pdev->dev, "%s: main driver probe failed\n", __func__); + return PTR_ERR(priv); } priv->dev->irq = pdev->irq; priv->wol_irq = pdev->irq; pci_set_drvdata(pdev, priv->dev); - pr_debug("STMMAC platform driver registration completed"); + dev_dbg(&pdev->dev, "STMMAC PCI driver registration completed\n"); return 0; - -err_out: - pci_clear_master(pdev); -err_out_map_failed: - pci_release_regions(pdev); -err_out_req_reg_failed: - pci_disable_device(pdev); - - return ret; } /** @@ -141,39 +123,30 @@ err_out_req_reg_failed: static void stmmac_pci_remove(struct pci_dev *pdev) { struct net_device *ndev = pci_get_drvdata(pdev); - struct stmmac_priv *priv = netdev_priv(ndev); stmmac_dvr_remove(ndev); - - pci_iounmap(pdev, priv->ioaddr); - pci_release_regions(pdev); - pci_disable_device(pdev); } -#ifdef CONFIG_PM -static int stmmac_pci_suspend(struct pci_dev *pdev, pm_message_t state) +#ifdef CONFIG_PM_SLEEP +static int stmmac_pci_suspend(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct net_device *ndev = pci_get_drvdata(pdev); - int ret; - - ret = stmmac_suspend(ndev); - pci_save_state(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - return ret; + return stmmac_suspend(ndev); } -static int stmmac_pci_resume(struct pci_dev *pdev) +static int stmmac_pci_resume(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct net_device *ndev = pci_get_drvdata(pdev); - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - return stmmac_resume(ndev); } #endif +static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_pci_suspend, stmmac_pci_resume); + #define STMMAC_VENDOR_ID 0x700 #define STMMAC_DEVICE_ID 0x1108 @@ -185,17 +158,18 @@ static const struct pci_device_id stmmac_id_table[] = { MODULE_DEVICE_TABLE(pci, stmmac_id_table); -struct pci_driver stmmac_pci_driver = { +static struct pci_driver stmmac_pci_driver = { .name = STMMAC_RESOURCE_NAME, .id_table = stmmac_id_table, .probe = stmmac_pci_probe, .remove = stmmac_pci_remove, -#ifdef CONFIG_PM - .suspend = stmmac_pci_suspend, - .resume = stmmac_pci_resume, -#endif + .driver = { + .pm = &stmmac_pm_ops, + }, }; +module_pci_driver(stmmac_pci_driver); + MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PCI driver"); MODULE_AUTHOR("Rayagond Kokatanur <rayagond.kokatanur@vayavyalabs.com>"); MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 5b0da39..07054ce 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -27,25 +27,19 @@ #include <linux/of.h> #include <linux/of_net.h> #include <linux/of_device.h> + #include "stmmac.h" +#include "stmmac_platform.h" static const struct of_device_id stmmac_dt_ids[] = { -#ifdef CONFIG_DWMAC_MESON + /* SoC specific glue layers should come before generic bindings */ { .compatible = "amlogic,meson6-dwmac", .data = &meson6_dwmac_data}, -#endif -#ifdef CONFIG_DWMAC_SUNXI { .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data}, -#endif -#ifdef CONFIG_DWMAC_STI { .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data}, { .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data}, { .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data}, { .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data}, -#endif -#ifdef CONFIG_DWMAC_SOCFPGA { .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data }, -#endif - /* SoC specific glue layers should come before generic bindings */ { .compatible = "st,spear600-gmac"}, { .compatible = "snps,dwmac-3.610"}, { .compatible = "snps,dwmac-3.70a"}, @@ -57,7 +51,11 @@ MODULE_DEVICE_TABLE(of, stmmac_dt_ids); #ifdef CONFIG_OF -/* This function validates the number of Multicast filtering bins specified +/** + * dwmac1000_validate_mcast_bins - validates the number of Multicast filter bins + * @mcast_bins: Multicast filtering bins + * Description: + * this function validates the number of Multicast filtering bins specified * by the configuration through the device tree. The Synopsys GMAC supports * 64 bins, 128 bins, or 256 bins. "bins" refer to the division of CRC * number space. 64 bins correspond to 6 bits of the CRC, 128 corresponds @@ -83,7 +81,11 @@ static int dwmac1000_validate_mcast_bins(int mcast_bins) return x; } -/* This function validates the number of Unicast address entries supported +/** + * dwmac1000_validate_ucast_entries - validate the Unicast address entries + * @ucast_entries: number of Unicast address entries + * Description: + * This function validates the number of Unicast address entries supported * by a particular Synopsys 10/100/1000 controller. The Synopsys controller * supports 1, 32, 64, or 128 Unicast filter entries for it's Unicast filter * logic. This function validates a valid, supported configuration is @@ -109,6 +111,15 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries) return x; } +/** + * stmmac_probe_config_dt - parse device-tree driver parameters + * @pdev: platform_device structure + * @plat: driver data platform structure + * @mac: MAC address to use + * Description: + * this function is to read the driver parameters from device-tree and + * set some private fields that will be used by the main at runtime. + */ static int stmmac_probe_config_dt(struct platform_device *pdev, struct plat_stmmacenet_data *plat, const char **mac) @@ -242,11 +253,11 @@ static int stmmac_probe_config_dt(struct platform_device *pdev, #endif /* CONFIG_OF */ /** - * stmmac_pltfr_probe + * stmmac_pltfr_probe - platform driver probe. * @pdev: platform device pointer - * Description: platform_device probe function. It allocates - * the necessary resources and invokes the main to init - * the net device, register the mdio bus etc. + * Description: platform_device probe function. It is to allocate + * the necessary platform resources, invoke custom helper (if required) and + * invoke the main probe function. */ static int stmmac_pltfr_probe(struct platform_device *pdev) { @@ -369,7 +380,14 @@ static int stmmac_pltfr_remove(struct platform_device *pdev) return ret; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP +/** + * stmmac_pltfr_suspend + * @dev: device pointer + * Description: this function is invoked when suspend the driver and it direcly + * call the main suspend function and then, if required, on some platform, it + * can call an exit helper. + */ static int stmmac_pltfr_suspend(struct device *dev) { int ret; @@ -384,6 +402,13 @@ static int stmmac_pltfr_suspend(struct device *dev) return ret; } +/** + * stmmac_pltfr_resume + * @dev: device pointer + * Description: this function is invoked when resume the driver before calling + * the main resume function, on some platforms, it can call own init helper + * if required. + */ static int stmmac_pltfr_resume(struct device *dev) { struct net_device *ndev = dev_get_drvdata(dev); @@ -395,13 +420,12 @@ static int stmmac_pltfr_resume(struct device *dev) return stmmac_resume(ndev); } - -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops, - stmmac_pltfr_suspend, stmmac_pltfr_resume); + stmmac_pltfr_suspend, stmmac_pltfr_resume); -struct platform_driver stmmac_pltfr_driver = { +static struct platform_driver stmmac_pltfr_driver = { .probe = stmmac_pltfr_probe, .remove = stmmac_pltfr_remove, .driver = { @@ -409,9 +433,11 @@ struct platform_driver stmmac_pltfr_driver = { .owner = THIS_MODULE, .pm = &stmmac_pltfr_pm_ops, .of_match_table = of_match_ptr(stmmac_dt_ids), - }, + }, }; +module_platform_driver(stmmac_pltfr_driver); + MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PLATFORM driver"); MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h new file mode 100644 index 0000000..25dd1f7 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h @@ -0,0 +1,28 @@ +/******************************************************************************* + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#ifndef __STMMAC_PLATFORM_H__ +#define __STMMAC_PLATFORM_H__ + +extern const struct stmmac_of_data meson6_dwmac_data; +extern const struct stmmac_of_data sun7i_gmac_data; +extern const struct stmmac_of_data stih4xx_dwmac_data; +extern const struct stmmac_of_data stid127_dwmac_data; +extern const struct stmmac_of_data socfpga_gmac_data; + +#endif /* __STMMAC_PLATFORM_H__ */ |