diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_main.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 |
1 files changed, 13 insertions, 1 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index e79b0d7..ef6a8d3 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -53,7 +53,7 @@ #include "dwmac1000.h" #include "hwif.h" -#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x) +#define STMMAC_ALIGN(x) __ALIGN_KERNEL(x, SMP_CACHE_BYTES) #define TSO_MAX_BUFF_SIZE (SZ_16K - 1) /* Module parameters */ @@ -928,6 +928,7 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv) static int stmmac_init_phy(struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); + u32 tx_cnt = priv->plat->tx_queues_to_use; struct phy_device *phydev; char phy_id_fmt[MII_BUS_ID_SIZE + 3]; char bus_id[MII_BUS_ID_SIZE]; @@ -969,6 +970,15 @@ static int stmmac_init_phy(struct net_device *dev) SUPPORTED_1000baseT_Full); /* + * Half-duplex mode not supported with multiqueue + * half-duplex can only works with single queue + */ + if (tx_cnt > 1) + phydev->supported &= ~(SUPPORTED_1000baseT_Half | + SUPPORTED_100baseT_Half | + SUPPORTED_10baseT_Half); + + /* * Broken HW is sometimes missing the pull-up resistor on the * MDIO line, which results in reads to non-existent devices returning * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent @@ -1794,6 +1804,8 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan, rxfifosz, qmode); + stmmac_set_dma_bfsize(priv, priv->ioaddr, priv->dma_buf_sz, + chan); } for (chan = 0; chan < tx_channels_count; chan++) { |
