summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c')
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c31
1 files changed, 19 insertions, 12 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index bf83c03..2c431b6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -30,8 +30,8 @@
#include "dwmac1000.h"
#include "dwmac_dma.h"
-static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb,
- int mb, int burst_len, u32 dma_tx, u32 dma_rx)
+static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
+ int burst_len, u32 dma_tx, u32 dma_rx, int atds)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
int limit;
@@ -60,7 +60,7 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb,
* depending on pbl value.
*/
value = DMA_BUS_MODE_PBL | ((pbl << DMA_BUS_MODE_PBL_SHIFT) |
- (pbl << DMA_BUS_MODE_RPBL_SHIFT));
+ (pbl << DMA_BUS_MODE_RPBL_SHIFT));
/* Set the Fixed burst mode */
if (fb)
@@ -73,6 +73,10 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb,
#ifdef CONFIG_STMMAC_DA
value |= DMA_BUS_MODE_DA; /* Rx has priority over tx */
#endif
+
+ if (atds)
+ value |= DMA_BUS_MODE_ATDS;
+
writel(value, ioaddr + DMA_BUS_MODE);
/* In case of GMAC AXI configuration, program the DMA_AXI_BUS_MODE
@@ -90,14 +94,16 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb,
*
* For Non Fixed Burst Mode: provide the maximum value of the
* burst length. Any burst equal or below the provided burst
- * length would be allowed to perform. */
+ * length would be allowed to perform.
+ */
writel(burst_len, ioaddr + DMA_AXI_BUS_MODE);
/* Mask interrupts by writing to CSR7 */
writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
- /* The base address of the RX/TX descriptor lists must be written into
- * DMA CSR3 and CSR4, respectively. */
+ /* RX/TX descriptor base address lists must be written into
+ * DMA CSR3 and CSR4, respectively
+ */
writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
@@ -105,7 +111,7 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb,
}
static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode,
- int rxmode)
+ int rxmode)
{
u32 csr6 = readl(ioaddr + DMA_CONTROL);
@@ -114,11 +120,12 @@ static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode,
/* Transmit COE type 2 cannot be done in cut-through mode. */
csr6 |= DMA_CONTROL_TSF;
/* Operating on second frame increase the performance
- * especially when transmit store-and-forward is used.*/
+ * especially when transmit store-and-forward is used.
+ */
csr6 |= DMA_CONTROL_OSF;
} else {
- CHIP_DBG(KERN_DEBUG "GMAC: disabling TX store and forward mode"
- " (threshold = %d)\n", txmode);
+ CHIP_DBG(KERN_DEBUG "GMAC: disabling TX SF (threshold %d)\n",
+ txmode);
csr6 &= ~DMA_CONTROL_TSF;
csr6 &= DMA_CONTROL_TC_TX_MASK;
/* Set the transmit threshold */
@@ -138,8 +145,8 @@ static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode,
CHIP_DBG(KERN_DEBUG "GMAC: enable RX store and forward mode\n");
csr6 |= DMA_CONTROL_RSF;
} else {
- CHIP_DBG(KERN_DEBUG "GMAC: disabling RX store and forward mode"
- " (threshold = %d)\n", rxmode);
+ CHIP_DBG(KERN_DEBUG "GMAC: disable RX SF mode (threshold %d)\n",
+ rxmode);
csr6 &= ~DMA_CONTROL_RSF;
csr6 &= DMA_CONTROL_TC_RX_MASK;
if (rxmode <= 32)
OpenPOWER on IntegriCloud