diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 69 |
1 files changed, 69 insertions, 0 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c index fd8a217..ec632e6 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -20,7 +20,9 @@ #include <linux/of_net.h> #include <linux/phy.h> #include <linux/regmap.h> +#include <linux/reset.h> #include <linux/stmmac.h> +#include "stmmac.h" #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1 @@ -34,6 +36,7 @@ struct socfpga_dwmac { u32 reg_shift; struct device *dev; struct regmap *sys_mgr_base_addr; + struct reset_control *stmmac_rst; }; static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev) @@ -43,6 +46,13 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device * u32 reg_offset, reg_shift; int ret; + dwmac->stmmac_rst = devm_reset_control_get(dev, + STMMAC_RESOURCE_NAME); + if (IS_ERR(dwmac->stmmac_rst)) { + dev_info(dev, "Could not get reset control!\n"); + return -EINVAL; + } + dwmac->interface = of_get_phy_mode(np); sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon"); @@ -125,6 +135,65 @@ static void *socfpga_dwmac_probe(struct platform_device *pdev) return dwmac; } +static void socfpga_dwmac_exit(struct platform_device *pdev, void *priv) +{ + struct socfpga_dwmac *dwmac = priv; + + /* On socfpga platform exit, assert and hold reset to the + * enet controller - the default state after a hard reset. + */ + if (dwmac->stmmac_rst) + reset_control_assert(dwmac->stmmac_rst); +} + +static int socfpga_dwmac_init(struct platform_device *pdev, void *priv) +{ + struct socfpga_dwmac *dwmac = priv; + struct net_device *ndev = platform_get_drvdata(pdev); + struct stmmac_priv *stpriv = NULL; + int ret = 0; + + if (ndev) + stpriv = netdev_priv(ndev); + + /* Assert reset to the enet controller before changing the phy mode */ + if (dwmac->stmmac_rst) + reset_control_assert(dwmac->stmmac_rst); + + /* Setup the phy mode in the system manager registers according to + * devicetree configuration + */ + ret = socfpga_dwmac_setup(dwmac); + + /* Deassert reset for the phy configuration to be sampled by + * the enet controller, and operation to start in requested mode + */ + if (dwmac->stmmac_rst) + reset_control_deassert(dwmac->stmmac_rst); + + /* Before the enet controller is suspended, the phy is suspended. + * This causes the phy clock to be gated. The enet controller is + * resumed before the phy, so the clock is still gated "off" when + * the enet controller is resumed. This code makes sure the phy + * is "resumed" before reinitializing the enet controller since + * the enet controller depends on an active phy clock to complete + * a DMA reset. A DMA reset will "time out" if executed + * with no phy clock input on the Synopsys enet controller. + * Verified through Synopsys Case #8000711656. + * + * Note that the phy clock is also gated when the phy is isolated. + * Phy "suspend" and "isolate" controls are located in phy basic + * control register 0, and can be modified by the phy driver + * framework. + */ + if (stpriv && stpriv->phydev) + phy_resume(stpriv->phydev); + + return ret; +} + const struct stmmac_of_data socfpga_gmac_data = { .setup = socfpga_dwmac_probe, + .init = socfpga_dwmac_init, + .exit = socfpga_dwmac_exit, }; |
