diff options
Diffstat (limited to 'drivers/net/ethernet/smsc/smsc911x.c')
| -rw-r--r-- | drivers/net/ethernet/smsc/smsc911x.c | 17 |
1 files changed, 15 insertions, 2 deletions
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 62d1baf..c53c0f4 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -2110,7 +2110,7 @@ static void __devinit smsc911x_read_mac_address(struct net_device *dev) static int __devinit smsc911x_init(struct net_device *dev) { struct smsc911x_data *pdata = netdev_priv(dev); - unsigned int byte_test; + unsigned int byte_test, mask; unsigned int to = 100; SMSC_TRACE(pdata, probe, "Driver Parameters:"); @@ -2130,9 +2130,22 @@ static int __devinit smsc911x_init(struct net_device *dev) /* * poll the READY bit in PMT_CTRL. Any other access to the device is * forbidden while this bit isn't set. Try for 100ms + * + * Note that this test is done before the WORD_SWAP register is + * programmed. So in some configurations the READY bit is at 16 before + * WORD_SWAP is written to. This issue is worked around by waiting + * until either bit 0 or bit 16 gets set in PMT_CTRL. + * + * SMSC has confirmed that checking bit 16 (marked as reserved in + * the datasheet) is fine since these bits "will either never be set + * or can only go high after READY does (so also indicate the device + * is ready)". */ - while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to) + + mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_); + while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to) udelay(1000); + if (to == 0) { pr_err("Device not READY in 100ms aborting\n"); return -ENODEV; |
