diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c')
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 91 |
1 files changed, 64 insertions, 27 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 8a2be44..526a20b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -317,14 +317,14 @@ bool ixgbe_check_reset_blocked(struct ixgbe_hw *hw) **/ static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) { - u32 status; + s32 status; u16 phy_id_high = 0; u16 phy_id_low = 0; status = hw->phy.ops.read_reg(hw, MDIO_DEVID1, MDIO_MMD_PMAPMD, &phy_id_high); - if (status == 0) { + if (!status) { hw->phy.id = (u32)(phy_id_high << 16); status = hw->phy.ops.read_reg(hw, MDIO_DEVID2, MDIO_MMD_PMAPMD, &phy_id_low); @@ -347,6 +347,7 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) case TN1010_PHY_ID: phy_type = ixgbe_phy_tn; break; + case X550_PHY_ID: case X540_PHY_ID: phy_type = ixgbe_phy_aq; break; @@ -356,6 +357,9 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) case ATH_PHY_ID: phy_type = ixgbe_phy_nl; break; + case X557_PHY_ID: + phy_type = ixgbe_phy_x550em_ext_t; + break; default: phy_type = ixgbe_phy_unknown; break; @@ -1348,6 +1352,9 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) return IXGBE_ERR_SFP_NOT_PRESENT; } + /* LAN ID is needed for sfp_type determination */ + hw->mac.ops.set_lan_id(hw); + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, &identifier); @@ -1361,9 +1368,6 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) hw->phy.id = identifier; - /* LAN ID is needed for sfp_type determination */ - hw->mac.ops.set_lan_id(hw); - status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g); @@ -1793,7 +1797,7 @@ fail: **/ static void ixgbe_i2c_start(struct ixgbe_hw *hw) { - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); /* Start condition must begin with data and clock high */ ixgbe_set_i2c_data(hw, &i2cctl, 1); @@ -1822,7 +1826,7 @@ static void ixgbe_i2c_start(struct ixgbe_hw *hw) **/ static void ixgbe_i2c_stop(struct ixgbe_hw *hw) { - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); /* Stop condition must begin with data low and clock high */ ixgbe_set_i2c_data(hw, &i2cctl, 0); @@ -1880,9 +1884,9 @@ static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) } /* Release SDA line (set high) */ - i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); - i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw); - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl); + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + i2cctl |= IXGBE_I2C_DATA_OUT(hw); + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl); IXGBE_WRITE_FLUSH(hw); return status; @@ -1898,7 +1902,7 @@ static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) { s32 status = 0; u32 i = 0; - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); u32 timeout = 10; bool ack = true; @@ -1911,7 +1915,7 @@ static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) /* Poll for ACK. Note that ACK in I2C spec is * transition from 1 to 0 */ for (i = 0; i < timeout; i++) { - i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); ack = ixgbe_get_i2c_data(hw, &i2cctl); udelay(1); @@ -1941,14 +1945,14 @@ static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) **/ static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) { - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); ixgbe_raise_i2c_clk(hw, &i2cctl); /* Minimum high period of clock is 4us */ udelay(IXGBE_I2C_T_HIGH); - i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); *data = ixgbe_get_i2c_data(hw, &i2cctl); ixgbe_lower_i2c_clk(hw, &i2cctl); @@ -1969,7 +1973,7 @@ static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) { s32 status; - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); status = ixgbe_set_i2c_data(hw, &i2cctl, data); if (status == 0) { @@ -2005,14 +2009,14 @@ static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) u32 i2cctl_r = 0; for (i = 0; i < timeout; i++) { - *i2cctl |= IXGBE_I2C_CLK_OUT_BY_MAC(hw); - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl); + *i2cctl |= IXGBE_I2C_CLK_OUT(hw); + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); IXGBE_WRITE_FLUSH(hw); /* SCL rise time (1000ns) */ udelay(IXGBE_I2C_T_RISE); - i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); - if (i2cctl_r & IXGBE_I2C_CLK_IN_BY_MAC(hw)) + i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); + if (i2cctl_r & IXGBE_I2C_CLK_IN(hw)) break; } } @@ -2027,9 +2031,9 @@ static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) { - *i2cctl &= ~IXGBE_I2C_CLK_OUT_BY_MAC(hw); + *i2cctl &= ~IXGBE_I2C_CLK_OUT(hw); - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl); + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); IXGBE_WRITE_FLUSH(hw); /* SCL fall time (300ns) */ @@ -2047,18 +2051,18 @@ static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) { if (data) - *i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw); + *i2cctl |= IXGBE_I2C_DATA_OUT(hw); else - *i2cctl &= ~IXGBE_I2C_DATA_OUT_BY_MAC(hw); + *i2cctl &= ~IXGBE_I2C_DATA_OUT(hw); - IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl); + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl); IXGBE_WRITE_FLUSH(hw); /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA); /* Verify data was set correctly */ - *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); if (data != ixgbe_get_i2c_data(hw, i2cctl)) { hw_dbg(hw, "Error - I2C data was not set to %X.\n", data); return IXGBE_ERR_I2C; @@ -2076,7 +2080,7 @@ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) **/ static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl) { - if (*i2cctl & IXGBE_I2C_DATA_IN_BY_MAC(hw)) + if (*i2cctl & IXGBE_I2C_DATA_IN(hw)) return true; return false; } @@ -2090,7 +2094,7 @@ static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl) **/ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) { - u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw)); + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw)); u32 i; ixgbe_i2c_start(hw); @@ -2137,3 +2141,36 @@ s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) return IXGBE_ERR_OVERTEMP; } + +/** ixgbe_set_copper_phy_power - Control power for copper phy + * @hw: pointer to hardware structure + * @on: true for on, false for off + **/ +s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on) +{ + u32 status; + u16 reg; + + /* Bail if we don't have copper phy */ + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) + return 0; + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + if (status) + return status; + + if (on) { + reg &= ~IXGBE_MDIO_PHY_SET_LOW_POWER_MODE; + } else { + if (ixgbe_check_reset_blocked(hw)) + return 0; + reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE; + } + + status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + reg); + return status; +} |