diff options
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_ptp.c')
-rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_ptp.c | 135 |
1 files changed, 102 insertions, 33 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c index 101f439..bb7fe98b 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c @@ -25,7 +25,6 @@ ******************************************************************************/ #include "i40e.h" -#include <linux/export.h> #include <linux/ptp_classify.h> /* The XL710 timesync is very much like Intel's 82599 design when it comes to @@ -216,7 +215,7 @@ static int i40e_ptp_settime(struct ptp_clock_info *ptp, } /** - * i40e_ptp_enable - Enable/disable ancillary features of the PHC subsystem + * i40e_ptp_feature_enable - Enable/disable ancillary features of the PHC subsystem * @ptp: The PTP clock structure * @rq: The requested feature to change * @on: Enable/disable flag @@ -224,8 +223,8 @@ static int i40e_ptp_settime(struct ptp_clock_info *ptp, * The XL710 does not support any of the ancillary features of the PHC * subsystem, so this function may just return. **/ -static int i40e_ptp_enable(struct ptp_clock_info *ptp, - struct ptp_clock_request *rq, int on) +static int i40e_ptp_feature_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *rq, int on) { return -EOPNOTSUPP; } @@ -315,6 +314,7 @@ void i40e_ptp_tx_hwtstamp(struct i40e_pf *pf) skb_tstamp_tx(pf->ptp_tx_skb, &shhwtstamps); dev_kfree_skb_any(pf->ptp_tx_skb); pf->ptp_tx_skb = NULL; + clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, &pf->state); } /** @@ -423,28 +423,23 @@ int i40e_ptp_get_ts_config(struct i40e_pf *pf, struct ifreq *ifr) } /** - * i40e_ptp_set_ts_config - ioctl interface to control the HW timestamping + * i40e_ptp_set_timestamp_mode - setup hardware for requested timestamp mode * @pf: Board private structure - * @ifreq: ioctl data + * @config: hwtstamp settings requested or saved * - * Respond to the user filter requests and make the appropriate hardware - * changes here. The XL710 cannot support splitting of the Tx/Rx timestamping - * logic, so keep track in software of whether to indicate these timestamps - * or not. + * Control hardware registers to enter the specific mode requested by the + * user. Also used during reset path to ensure that timestamp settings are + * maintained. * - * It is permissible to "upgrade" the user request to a broader filter, as long - * as the user receives the timestamps they care about and the user is notified - * the filter has been broadened. + * Note: modifies config in place, and may update the requested mode to be + * more broad if the specific filter is not directly supported. **/ -int i40e_ptp_set_ts_config(struct i40e_pf *pf, struct ifreq *ifr) +static int i40e_ptp_set_timestamp_mode(struct i40e_pf *pf, + struct hwtstamp_config *config) { struct i40e_hw *hw = &pf->hw; - struct hwtstamp_config *config = &pf->tstamp_config; u32 pf_id, tsyntype, regval; - if (copy_from_user(config, ifr->ifr_data, sizeof(*config))) - return -EFAULT; - /* Reserved for future extensions. */ if (config->flags) return -EINVAL; @@ -452,8 +447,12 @@ int i40e_ptp_set_ts_config(struct i40e_pf *pf, struct ifreq *ifr) /* Confirm that 1588 is supported on this PF. */ pf_id = (rd32(hw, I40E_PRTTSYN_CTL0) & I40E_PRTTSYN_CTL0_PF_ID_MASK) >> I40E_PRTTSYN_CTL0_PF_ID_SHIFT; - if (hw->pf_id != pf_id) - return -EINVAL; + if (hw->pf_id != pf_id) { + dev_err(&pf->pdev->dev, + "PF %d attempted to control timestamp mode on port %d, which is owned by PF %d\n", + hw->pf_id, hw->port, pf_id); + return -EPERM; + } switch (config->tx_type) { case HWTSTAMP_TX_OFF: @@ -535,23 +534,59 @@ int i40e_ptp_set_ts_config(struct i40e_pf *pf, struct ifreq *ifr) wr32(hw, I40E_PRTTSYN_CTL1, regval); } - return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ? + return 0; +} + +/** + * i40e_ptp_set_ts_config - ioctl interface to control the HW timestamping + * @pf: Board private structure + * @ifreq: ioctl data + * + * Respond to the user filter requests and make the appropriate hardware + * changes here. The XL710 cannot support splitting of the Tx/Rx timestamping + * logic, so keep track in software of whether to indicate these timestamps + * or not. + * + * It is permissible to "upgrade" the user request to a broader filter, as long + * as the user receives the timestamps they care about and the user is notified + * the filter has been broadened. + **/ +int i40e_ptp_set_ts_config(struct i40e_pf *pf, struct ifreq *ifr) +{ + struct hwtstamp_config config; + int err; + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + err = i40e_ptp_set_timestamp_mode(pf, &config); + if (err) + return err; + + /* save these settings for future reference */ + pf->tstamp_config = config; + + return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? -EFAULT : 0; } /** - * i40e_ptp_init - Initialize the 1588 support and register the PHC + * i40e_ptp_create_clock - Create PTP clock device for userspace * @pf: Board private structure * - * This function registers the device clock as a PHC. If it is successful, it - * starts the clock in the hardware. + * This function creates a new PTP clock device. It only creates one if we + * don't already have one, so it is safe to call. Will return error if it + * can't create one, but success if we already have a device. Should be used + * by i40e_ptp_init to create clock initially, and prevent global resets from + * creating new clock devices. **/ -void i40e_ptp_init(struct i40e_pf *pf) +static long i40e_ptp_create_clock(struct i40e_pf *pf) { - struct i40e_hw *hw = &pf->hw; - struct net_device *netdev = pf->vsi[pf->lan_vsi]->netdev; + /* no need to create a clock device if we already have one */ + if (!IS_ERR_OR_NULL(pf->ptp_clock)) + return 0; - strncpy(pf->ptp_caps.name, "i40e", sizeof(pf->ptp_caps.name)); + strncpy(pf->ptp_caps.name, i40e_driver_name, sizeof(pf->ptp_caps.name)); pf->ptp_caps.owner = THIS_MODULE; pf->ptp_caps.max_adj = 999999999; pf->ptp_caps.n_ext_ts = 0; @@ -560,11 +595,46 @@ void i40e_ptp_init(struct i40e_pf *pf) pf->ptp_caps.adjtime = i40e_ptp_adjtime; pf->ptp_caps.gettime = i40e_ptp_gettime; pf->ptp_caps.settime = i40e_ptp_settime; - pf->ptp_caps.enable = i40e_ptp_enable; + pf->ptp_caps.enable = i40e_ptp_feature_enable; /* Attempt to register the clock before enabling the hardware. */ pf->ptp_clock = ptp_clock_register(&pf->ptp_caps, &pf->pdev->dev); if (IS_ERR(pf->ptp_clock)) { + return PTR_ERR(pf->ptp_clock); + } + + /* clear the hwtstamp settings here during clock create, instead of + * during regular init, so that we can maintain settings across a + * reset or suspend. + */ + pf->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE; + pf->tstamp_config.tx_type = HWTSTAMP_TX_OFF; + + return 0; +} + +/** + * i40e_ptp_init - Initialize the 1588 support after device probe or reset + * @pf: Board private structure + * + * This function sets device up for 1588 support. The first time it is run, it + * will create a PHC clock device. It does not create a clock device if one + * already exists. It also reconfigures the device after a reset. + **/ +void i40e_ptp_init(struct i40e_pf *pf) +{ + struct net_device *netdev = pf->vsi[pf->lan_vsi]->netdev; + struct i40e_hw *hw = &pf->hw; + long err; + + /* we have to initialize the lock first, since we can't control + * when the user will enter the PHC device entry points + */ + spin_lock_init(&pf->tmreg_lock); + + /* ensure we have a clock device */ + err = i40e_ptp_create_clock(pf); + if (err) { pf->ptp_clock = NULL; dev_err(&pf->pdev->dev, "%s: ptp_clock_register failed\n", __func__); @@ -572,8 +642,6 @@ void i40e_ptp_init(struct i40e_pf *pf) struct timespec ts; u32 regval; - spin_lock_init(&pf->tmreg_lock); - dev_info(&pf->pdev->dev, "%s: added PHC on %s\n", __func__, netdev->name); pf->flags |= I40E_FLAG_PTP; @@ -589,8 +657,8 @@ void i40e_ptp_init(struct i40e_pf *pf) /* Set the increment value per clock tick. */ i40e_ptp_set_increment(pf); - /* reset the tstamp_config */ - memset(&pf->tstamp_config, 0, sizeof(pf->tstamp_config)); + /* reset timestamping mode */ + i40e_ptp_set_timestamp_mode(pf, &pf->tstamp_config); /* Set the clock value. */ ts = ktime_to_timespec(ktime_get_real()); @@ -614,6 +682,7 @@ void i40e_ptp_stop(struct i40e_pf *pf) if (pf->ptp_tx_skb) { dev_kfree_skb_any(pf->ptp_tx_skb); pf->ptp_tx_skb = NULL; + clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, &pf->state); } if (pf->ptp_clock) { |