summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/e1000e
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e')
-rw-r--r--drivers/net/ethernet/intel/e1000e/80003es2lan.c131
-rw-r--r--drivers/net/ethernet/intel/e1000e/82571.c38
-rw-r--r--drivers/net/ethernet/intel/e1000e/82571.h2
-rw-r--r--drivers/net/ethernet/intel/e1000e/defines.h27
-rw-r--r--drivers/net/ethernet/intel/e1000e/e1000.h21
-rw-r--r--drivers/net/ethernet/intel/e1000e/ethtool.c240
-rw-r--r--drivers/net/ethernet/intel/e1000e/hw.h4
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c408
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.h11
-rw-r--r--drivers/net/ethernet/intel/e1000e/mac.c37
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c343
-rw-r--r--drivers/net/ethernet/intel/e1000e/nvm.c2
-rw-r--r--drivers/net/ethernet/intel/e1000e/param.c62
-rw-r--r--drivers/net/ethernet/intel/e1000e/phy.c134
-rw-r--r--drivers/net/ethernet/intel/e1000e/ptp.c3
15 files changed, 826 insertions, 637 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index e099138..b71c850 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -37,7 +37,9 @@
* "index + 5".
*/
static const u16 e1000_gg82563_cable_length_table[] = {
- 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
+ 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF
+};
+
#define GG82563_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_gg82563_cable_length_table)
@@ -116,7 +118,7 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
nvm->type = e1000_nvm_eeprom_spi;
size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
- E1000_EECD_SIZE_EX_SHIFT);
+ E1000_EECD_SIZE_EX_SHIFT);
/* Added to a constant, "size" becomes the left-shift value
* for setting word_size.
@@ -393,7 +395,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
* before the device has completed the "Page Select" MDI
* transaction. So we wait 200us after each MDI command...
*/
- udelay(200);
+ usleep_range(200, 400);
/* ...and verify the command was successful. */
ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
@@ -403,17 +405,17 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
return -E1000_ERR_PHY;
}
- udelay(200);
+ usleep_range(200, 400);
ret_val = e1000e_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
- udelay(200);
+ usleep_range(200, 400);
} else {
ret_val = e1000e_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
}
e1000_release_phy_80003es2lan(hw);
@@ -462,7 +464,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
* before the device has completed the "Page Select" MDI
* transaction. So we wait 200us after each MDI command...
*/
- udelay(200);
+ usleep_range(200, 400);
/* ...and verify the command was successful. */
ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
@@ -472,17 +474,17 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
return -E1000_ERR_PHY;
}
- udelay(200);
+ usleep_range(200, 400);
ret_val = e1000e_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS &
+ offset, data);
- udelay(200);
+ usleep_range(200, 400);
} else {
ret_val = e1000e_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS &
+ offset, data);
}
e1000_release_phy_80003es2lan(hw);
@@ -580,7 +582,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
e_dbg("Waiting for forced speed/duplex link on GG82563 phy.\n");
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
- 100000, &link);
+ 100000, &link);
if (ret_val)
return ret_val;
@@ -595,7 +597,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
/* Try once more */
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
- 100000, &link);
+ 100000, &link);
if (ret_val)
return ret_val;
}
@@ -666,14 +668,12 @@ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
s32 ret_val;
if (hw->phy.media_type == e1000_media_type_copper) {
- ret_val = e1000e_get_speed_and_duplex_copper(hw,
- speed,
- duplex);
+ ret_val = e1000e_get_speed_and_duplex_copper(hw, speed, duplex);
hw->phy.ops.cfg_on_link_up(hw);
} else {
ret_val = e1000e_get_speed_and_duplex_fiber_serdes(hw,
- speed,
- duplex);
+ speed,
+ duplex);
}
return ret_val;
@@ -754,9 +754,9 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
/* Initialize identification LED */
ret_val = mac->ops.id_led_init(hw);
+ /* An error is not fatal and we should not stop init due to this */
if (ret_val)
e_dbg("Error initializing identification LED\n");
- /* This is not fatal and we should not stop init due to this */
/* Disabling VLAN filtering */
e_dbg("Initializing the IEEE VLAN\n");
@@ -784,14 +784,14 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
/* Set the transmit descriptor write-back policy */
reg_data = er32(TXDCTL(0));
- reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
+ reg_data = ((reg_data & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC);
ew32(TXDCTL(0), reg_data);
/* ...for both queues. */
reg_data = er32(TXDCTL(1));
- reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
+ reg_data = ((reg_data & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC);
ew32(TXDCTL(1), reg_data);
/* Enable retransmit on late collisions */
@@ -818,13 +818,12 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
/* default to true to enable the MDIC W/A */
hw->dev_spec.e80003es2lan.mdic_wa_enable = true;
- ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET >>
- E1000_KMRNCTRLSTA_OFFSET_SHIFT,
- &i);
+ ret_val =
+ e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_OFFSET >>
+ E1000_KMRNCTRLSTA_OFFSET_SHIFT, &i);
if (!ret_val) {
if ((i & E1000_KMRNCTRLSTA_OPMODE_MASK) ==
- E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO)
+ E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO)
hw->dev_spec.e80003es2lan.mdic_wa_enable = false;
}
@@ -891,7 +890,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
- u32 ctrl_ext;
+ u32 reg;
u16 data;
ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &data);
@@ -954,22 +953,19 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
}
/* Bypass Rx and Tx FIFO's */
- ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL,
- E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
- E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
+ reg = E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL;
+ data = (E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
+ E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw, reg, data);
if (ret_val)
return ret_val;
- ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
- &data);
+ reg = E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE;
+ ret_val = e1000_read_kmrn_reg_80003es2lan(hw, reg, &data);
if (ret_val)
return ret_val;
data |= E1000_KMRNCTRLSTA_OPMODE_E_IDLE;
- ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
- data);
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw, reg, data);
if (ret_val)
return ret_val;
@@ -982,9 +978,9 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext &= ~(E1000_CTRL_EXT_LINK_MODE_MASK);
- ew32(CTRL_EXT, ctrl_ext);
+ reg = er32(CTRL_EXT);
+ reg &= ~E1000_CTRL_EXT_LINK_MODE_MASK;
+ ew32(CTRL_EXT, reg);
ret_val = e1e_rphy(hw, GG82563_PHY_PWR_MGMT_CTRL, &data);
if (ret_val)
@@ -1049,27 +1045,29 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
* polling the phy; this fixes erroneous timeouts at 10Mbps.
*/
ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 4),
- 0xFFFF);
+ 0xFFFF);
if (ret_val)
return ret_val;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
- &reg_data);
+ &reg_data);
if (ret_val)
return ret_val;
reg_data |= 0x3F;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
- reg_data);
+ reg_data);
if (ret_val)
return ret_val;
- ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
- &reg_data);
+ ret_val =
+ e1000_read_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
+ &reg_data);
if (ret_val)
return ret_val;
reg_data |= E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING;
- ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
- reg_data);
+ ret_val =
+ e1000_write_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
@@ -1096,7 +1094,7 @@ static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw)
if (hw->phy.media_type == e1000_media_type_copper) {
ret_val = e1000e_get_speed_and_duplex_copper(hw, &speed,
- &duplex);
+ &duplex);
if (ret_val)
return ret_val;
@@ -1125,9 +1123,10 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
u16 reg_data, reg_data2;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
- ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
+ ret_val =
+ e1000_write_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
@@ -1171,9 +1170,10 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
u32 i = 0;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
- ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
+ ret_val =
+ e1000_write_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
@@ -1220,7 +1220,7 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
return ret_val;
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
+ E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
ew32(KMRNCTRLSTA, kmrnctrlsta);
e1e_flush();
@@ -1255,7 +1255,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
return ret_val;
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | data;
+ E1000_KMRNCTRLSTA_OFFSET) | data;
ew32(KMRNCTRLSTA, kmrnctrlsta);
e1e_flush();
@@ -1419,4 +1419,3 @@ const struct e1000_info e1000_es2_info = {
.phy_ops = &es2_phy_ops,
.nvm_ops = &es2_nvm_ops,
};
-
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index 2faffbd..7380442 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -184,7 +184,7 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
default:
nvm->type = e1000_nvm_eeprom_spi;
size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
- E1000_EECD_SIZE_EX_SHIFT);
+ E1000_EECD_SIZE_EX_SHIFT);
/* Added to a constant, "size" becomes the left-shift value
* for setting word_size.
*/
@@ -437,7 +437,7 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
return ret_val;
phy->id = (u32)(phy_id << 16);
- udelay(20);
+ usleep_range(20, 40);
ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id);
if (ret_val)
return ret_val;
@@ -482,7 +482,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
if (!(swsm & E1000_SWSM_SMBI))
break;
- udelay(50);
+ usleep_range(50, 100);
i++;
}
@@ -499,7 +499,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
if (er32(SWSM) & E1000_SWSM_SWESMBI)
break;
- udelay(50);
+ usleep_range(50, 100);
}
if (i == fw_timeout) {
@@ -526,6 +526,7 @@ static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
ew32(SWSM, swsm);
}
+
/**
* e1000_get_hw_semaphore_82573 - Acquire hardware semaphore
* @hw: pointer to the HW structure
@@ -846,9 +847,9 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
}
for (i = 0; i < words; i++) {
- eewr = (data[i] << E1000_NVM_RW_REG_DATA) |
- ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
- E1000_NVM_RW_REG_START;
+ eewr = ((data[i] << E1000_NVM_RW_REG_DATA) |
+ ((offset + i) << E1000_NVM_RW_ADDR_SHIFT) |
+ E1000_NVM_RW_REG_START);
ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
if (ret_val)
@@ -875,8 +876,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
s32 timeout = PHY_CFG_TIMEOUT;
while (timeout) {
- if (er32(EEMNGCTL) &
- E1000_NVM_CFG_DONE_PORT_0)
+ if (er32(EEMNGCTL) & E1000_NVM_CFG_DONE_PORT_0)
break;
usleep_range(1000, 2000);
timeout--;
@@ -1022,7 +1022,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
}
if (hw->nvm.type == e1000_nvm_flash_hw) {
- udelay(10);
+ usleep_range(10, 20);
ctrl_ext = er32(CTRL_EXT);
ctrl_ext |= E1000_CTRL_EXT_EE_RST;
ew32(CTRL_EXT, ctrl_ext);
@@ -1095,9 +1095,9 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
/* Initialize identification LED */
ret_val = mac->ops.id_led_init(hw);
+ /* An error is not fatal and we should not stop init due to this */
if (ret_val)
e_dbg("Error initializing identification LED\n");
- /* This is not fatal and we should not stop init due to this */
/* Disabling VLAN filtering */
e_dbg("Initializing the IEEE VLAN\n");
@@ -1122,9 +1122,8 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
/* Set the transmit descriptor write-back policy */
reg_data = er32(TXDCTL(0));
- reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB |
- E1000_TXDCTL_COUNT_DESC;
+ reg_data = ((reg_data & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC);
ew32(TXDCTL(0), reg_data);
/* ...for both queues. */
@@ -1140,9 +1139,9 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
break;
default:
reg_data = er32(TXDCTL(1));
- reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB |
- E1000_TXDCTL_COUNT_DESC;
+ reg_data = ((reg_data & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB |
+ E1000_TXDCTL_COUNT_DESC);
ew32(TXDCTL(1), reg_data);
break;
}
@@ -1530,7 +1529,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
status = er32(STATUS);
er32(RXCW);
/* SYNCH bit and IV bit are sticky */
- udelay(10);
+ usleep_range(10, 20);
rxcw = er32(RXCW);
if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
@@ -1633,7 +1632,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
* the IV bit and restart Autoneg
*/
for (i = 0; i < AN_RETRY_COUNT; i++) {
- udelay(10);
+ usleep_range(10, 20);
rxcw = er32(RXCW);
if ((rxcw & E1000_RXCW_SYNCH) &&
(rxcw & E1000_RXCW_C))
@@ -2066,4 +2065,3 @@ const struct e1000_info e1000_82583_info = {
.phy_ops = &e82_phy_ops_bm,
.nvm_ops = &e82571_nvm_ops,
};
-
diff --git a/drivers/net/ethernet/intel/e1000e/82571.h b/drivers/net/ethernet/intel/e1000e/82571.h
index 85cb1a3..08e24dc 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.h
+++ b/drivers/net/ethernet/intel/e1000e/82571.h
@@ -44,6 +44,8 @@
#define E1000_EIAC_82574 0x000DC /* Ext. Interrupt Auto Clear - RW */
#define E1000_EIAC_MASK_82574 0x01F00000
+#define E1000_IVAR_INT_ALLOC_VALID 0x8
+
/* Manageability Operation Mode mask */
#define E1000_NVM_INIT_CTRL2_MNGM 0x6000
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index fc3a4fe..351c94a 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -66,7 +66,7 @@
#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
#define E1000_CTRL_EXT_EIAME 0x01000000
#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
-#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Int ACK Auto-mask */
#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
#define E1000_CTRL_EXT_LSECCK 0x00001000
#define E1000_CTRL_EXT_PHYPDEN 0x00100000
@@ -216,6 +216,8 @@
#define E1000_CTRL_MEHE 0x00080000 /* Memory Error Handling Enable */
#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */
+#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 /* PHY PM enable */
#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
#define E1000_CTRL_RST 0x04000000 /* Global reset */
#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
@@ -234,17 +236,17 @@
#define E1000_STATUS_FUNC_SHIFT 2
#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_SPEED_MASK 0x000000C0
#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
-#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Master Req status */
#define HALF_DUPLEX 1
#define FULL_DUPLEX 2
-
#define ADVERTISE_10_HALF 0x0001
#define ADVERTISE_10_FULL 0x0002
#define ADVERTISE_100_HALF 0x0004
@@ -311,6 +313,7 @@
/* SerDes Control */
#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
+#define E1000_SCTL_ENABLE_SERDES_LOOPBACK 0x0410
/* Receive Checksum Control */
#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
@@ -400,7 +403,8 @@
#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
#define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */
-#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+/* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_INT_ASSERTED 0x80000000
#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */
#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
@@ -583,13 +587,13 @@
#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES)
-#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write registers */
-#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
-#define E1000_NVM_RW_REG_START 1 /* Start operation */
-#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
-#define E1000_NVM_POLL_WRITE 1 /* Flag for polling for write complete */
-#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */
-#define E1000_FLASH_UPDATES 2000
+#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM r/w regs */
+#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_NVM_RW_REG_START 1 /* Start operation */
+#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_NVM_POLL_WRITE 1 /* Flag for polling write complete */
+#define E1000_NVM_POLL_READ 0 /* Flag for polling read complete */
+#define E1000_FLASH_UPDATES 2000
/* NVM Word Offsets */
#define NVM_COMPAT 0x0003
@@ -785,6 +789,7 @@
GG82563_REG(194, 18) /* Inband Control */
/* MDI Control */
+#define E1000_MDIC_REG_MASK 0x001F0000
#define E1000_MDIC_REG_SHIFT 16
#define E1000_MDIC_PHY_SHIFT 21
#define E1000_MDIC_OP_WRITE 0x04000000
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index fcc7581..82f1c8428 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -46,6 +46,7 @@
#include <linux/ptp_clock_kernel.h>
#include <linux/ptp_classify.h>
#include <linux/mii.h>
+#include <linux/mdio.h>
#include "hw.h"
struct e1000_info;
@@ -61,7 +62,6 @@ struct e1000_info;
#define e_notice(format, arg...) \
netdev_notice(adapter->netdev, format, ## arg)
-
/* Interrupt modes, as used by the IntMode parameter */
#define E1000E_INT_MODE_LEGACY 0
#define E1000E_INT_MODE_MSI 1
@@ -239,9 +239,8 @@ struct e1000_adapter {
u16 tx_itr;
u16 rx_itr;
- /* Tx */
- struct e1000_ring *tx_ring /* One per active queue */
- ____cacheline_aligned_in_smp;
+ /* Tx - one ring per active queue */
+ struct e1000_ring *tx_ring ____cacheline_aligned_in_smp;
u32 tx_fifo_limit;
struct napi_struct napi;
@@ -352,6 +351,8 @@ struct e1000_adapter {
struct timecounter tc;
struct ptp_clock *ptp_clock;
struct ptp_clock_info ptp_clock_info;
+
+ u16 eee_advert;
};
struct e1000_info {
@@ -487,8 +488,8 @@ extern int e1000e_setup_tx_resources(struct e1000_ring *ring);
extern void e1000e_free_rx_resources(struct e1000_ring *ring);
extern void e1000e_free_tx_resources(struct e1000_ring *ring);
extern struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
- struct rtnl_link_stats64
- *stats);
+ struct rtnl_link_stats64
+ *stats);
extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
extern void e1000e_get_hw_control(struct e1000_adapter *adapter);
@@ -558,12 +559,14 @@ static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw)
return hw->nvm.ops.update(hw);
}
-static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
return hw->nvm.ops.read(hw, offset, words, data);
}
-static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
return hw->nvm.ops.write(hw, offset, words, data);
}
@@ -597,7 +600,7 @@ static inline s32 __ew32_prepare(struct e1000_hw *hw)
s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT;
while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i)
- udelay(50);
+ usleep_range(50, 100);
return i;
}
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index f91a8f3..7c8ca65 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -35,12 +35,11 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/vmalloc.h>
-#include <linux/mdio.h>
#include <linux/pm_runtime.h>
#include "e1000.h"
-enum {NETDEV_STATS, E1000_STATS};
+enum { NETDEV_STATS, E1000_STATS };
struct e1000_stats {
char stat_string[ETH_GSTRING_LEN];
@@ -121,6 +120,7 @@ static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
"Interrupt test (offline)", "Loopback test (offline)",
"Link test (on/offline)"
};
+
#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
static int e1000_get_settings(struct net_device *netdev,
@@ -197,8 +197,7 @@ static int e1000_get_settings(struct net_device *netdev,
/* MDI-X => 2; MDI =>1; Invalid =>0 */
if ((hw->phy.media_type == e1000_media_type_copper) &&
netif_carrier_ok(netdev))
- ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
- ETH_TP_MDI;
+ ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X : ETH_TP_MDI;
else
ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
@@ -224,8 +223,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
/* Fiber NICs only allow 1000 gbps Full duplex */
if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
- spd != SPEED_1000 &&
- dplx != DUPLEX_FULL) {
+ (spd != SPEED_1000) && (dplx != DUPLEX_FULL)) {
goto err_inval;
}
@@ -298,12 +296,10 @@ static int e1000_set_settings(struct net_device *netdev,
hw->mac.autoneg = 1;
if (hw->phy.media_type == e1000_media_type_fiber)
hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE |
- ADVERTISED_Autoneg;
+ ADVERTISED_FIBRE | ADVERTISED_Autoneg;
else
hw->phy.autoneg_advertised = ecmd->advertising |
- ADVERTISED_TP |
- ADVERTISED_Autoneg;
+ ADVERTISED_TP | ADVERTISED_Autoneg;
ecmd->advertising = hw->phy.autoneg_advertised;
if (adapter->fc_autoneg)
hw->fc.requested_mode = e1000_fc_default;
@@ -346,7 +342,7 @@ static void e1000_get_pauseparam(struct net_device *netdev,
struct e1000_hw *hw = &adapter->hw;
pause->autoneg =
- (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
if (hw->fc.current_mode == e1000_fc_rx_pause) {
pause->rx_pause = 1;
@@ -435,7 +431,7 @@ static void e1000_get_regs(struct net_device *netdev,
memset(p, 0, E1000_REGS_LEN * sizeof(u32));
regs->version = (1 << 24) | (adapter->pdev->revision << 16) |
- adapter->pdev->device;
+ adapter->pdev->device;
regs_buff[0] = er32(CTRL);
regs_buff[1] = er32(STATUS);
@@ -503,8 +499,8 @@ static int e1000_get_eeprom(struct net_device *netdev,
first_word = eeprom->offset >> 1;
last_word = (eeprom->offset + eeprom->len - 1) >> 1;
- eeprom_buff = kmalloc(sizeof(u16) *
- (last_word - first_word + 1), GFP_KERNEL);
+ eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
+ GFP_KERNEL);
if (!eeprom_buff)
return -ENOMEM;
@@ -515,7 +511,7 @@ static int e1000_get_eeprom(struct net_device *netdev,
} else {
for (i = 0; i < last_word - first_word + 1; i++) {
ret_val = e1000_read_nvm(hw, first_word + i, 1,
- &eeprom_buff[i]);
+ &eeprom_buff[i]);
if (ret_val)
break;
}
@@ -553,7 +549,8 @@ static int e1000_set_eeprom(struct net_device *netdev,
if (eeprom->len == 0)
return -EOPNOTSUPP;
- if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
+ if (eeprom->magic !=
+ (adapter->pdev->vendor | (adapter->pdev->device << 16)))
return -EFAULT;
if (adapter->flags & FLAG_READ_ONLY_NVM)
@@ -579,7 +576,7 @@ static int e1000_set_eeprom(struct net_device *netdev,
/* need read/modify/write of last changed EEPROM word */
/* only the first byte of the word is being modified */
ret_val = e1000_read_nvm(hw, last_word, 1,
- &eeprom_buff[last_word - first_word]);
+ &eeprom_buff[last_word - first_word]);
if (ret_val)
goto out;
@@ -618,8 +615,7 @@ static void e1000_get_drvinfo(struct net_device *netdev,
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- strlcpy(drvinfo->driver, e1000e_driver_name,
- sizeof(drvinfo->driver));
+ strlcpy(drvinfo->driver, e1000e_driver_name, sizeof(drvinfo->driver));
strlcpy(drvinfo->version, e1000e_driver_version,
sizeof(drvinfo->version));
@@ -627,10 +623,10 @@ static void e1000_get_drvinfo(struct net_device *netdev,
* PCI-E controllers
*/
snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
- "%d.%d-%d",
- (adapter->eeprom_vers & 0xF000) >> 12,
- (adapter->eeprom_vers & 0x0FF0) >> 4,
- (adapter->eeprom_vers & 0x000F));
+ "%d.%d-%d",
+ (adapter->eeprom_vers & 0xF000) >> 12,
+ (adapter->eeprom_vers & 0x0FF0) >> 4,
+ (adapter->eeprom_vers & 0x000F));
strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
sizeof(drvinfo->bus_info));
@@ -756,7 +752,8 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
{
u32 pat, val;
static const u32 test[] = {
- 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
+ };
for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
(test[pat] & write));
@@ -786,6 +783,7 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
}
return 0;
}
+
#define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write) \
do { \
if (reg_pattern_test(adapter, data, reg, offset, mask, write)) \
@@ -813,16 +811,16 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
u32 wlock_mac = 0;
/* The status register is Read Only, so a write should fail.
- * Some bits that get toggled are ignored.
+ * Some bits that get toggled are ignored. There are several bits
+ * on newer hardware that are r/w.
*/
switch (mac->type) {
- /* there are several bits on newer hardware that are r/w */
case e1000_82571:
case e1000_82572:
case e1000_80003es2lan:
toggle = 0x7FFFF3FF;
break;
- default:
+ default:
toggle = 0x7FFFF033;
break;
}
@@ -928,7 +926,7 @@ static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
}
/* If Checksum is not Correct return error else test passed */
- if ((checksum != (u16) NVM_SUM) && !(*data))
+ if ((checksum != (u16)NVM_SUM) && !(*data))
*data = 2;
return *data;
@@ -936,7 +934,7 @@ static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
static irqreturn_t e1000_test_intr(int __always_unused irq, void *data)
{
- struct net_device *netdev = (struct net_device *) data;
+ struct net_device *netdev = (struct net_device *)data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
@@ -969,8 +967,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
netdev)) {
shared_int = 0;
- } else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
- netdev->name, netdev)) {
+ } else if (request_irq(irq, e1000_test_intr, IRQF_SHARED, netdev->name,
+ netdev)) {
*data = 1;
ret_val = -1;
goto out;
@@ -1080,28 +1078,33 @@ static void e1000_free_desc_rings(struct e1000_adapter *adapter)
struct e1000_ring *tx_ring = &adapter->test_tx_ring;
struct e1000_ring *rx_ring = &adapter->test_rx_ring;
struct pci_dev *pdev = adapter->pdev;
+ struct e1000_buffer *buffer_info;
int i;
if (tx_ring->desc && tx_ring->buffer_info) {
for (i = 0; i < tx_ring->count; i++) {
- if (tx_ring->buffer_info[i].dma)
+ buffer_info = &tx_ring->buffer_info[i];
+
+ if (buffer_info->dma)
dma_unmap_single(&pdev->dev,
- tx_ring->buffer_info[i].dma,
- tx_ring->buffer_info[i].length,
- DMA_TO_DEVICE);
- if (tx_ring->buffer_info[i].skb)
- dev_kfree_skb(tx_ring->buffer_info[i].skb);
+ buffer_info->dma,
+ buffer_info->length,
+ DMA_TO_DEVICE);
+ if (buffer_info->skb)
+ dev_kfree_skb(buffer_info->skb);
}
}
if (rx_ring->desc && rx_ring->buffer_info) {
for (i = 0; i < rx_ring->count; i++) {
- if (rx_ring->buffer_info[i].dma)
+ buffer_info = &rx_ring->buffer_info[i];
+
+ if (buffer_info->dma)
dma_unmap_single(&pdev->dev,
- rx_ring->buffer_info[i].dma,
- 2048, DMA_FROM_DEVICE);
- if (rx_ring->buffer_info[i].skb)
- dev_kfree_skb(rx_ring->buffer_info[i].skb);
+ buffer_info->dma,
+ 2048, DMA_FROM_DEVICE);
+ if (buffer_info->skb)
+ dev_kfree_skb(buffer_info->skb);
}
}
@@ -1138,8 +1141,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
tx_ring->count = E1000_DEFAULT_TXD;
tx_ring->buffer_info = kcalloc(tx_ring->count,
- sizeof(struct e1000_buffer),
- GFP_KERNEL);
+ sizeof(struct e1000_buffer), GFP_KERNEL);
if (!tx_ring->buffer_info) {
ret_val = 1;
goto err_nomem;
@@ -1156,8 +1158,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
- ew32(TDBAL(0), ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
- ew32(TDBAH(0), ((u64) tx_ring->dma >> 32));
+ ew32(TDBAL(0), ((u64)tx_ring->dma & 0x00000000FFFFFFFF));
+ ew32(TDBAH(0), ((u64)tx_ring->dma >> 32));
ew32(TDLEN(0), tx_ring->count * sizeof(struct e1000_tx_desc));
ew32(TDH(0), 0);
ew32(TDT(0), 0);
@@ -1179,8 +1181,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
tx_ring->buffer_info[i].skb = skb;
tx_ring->buffer_info[i].length = skb->len;
tx_ring->buffer_info[i].dma =
- dma_map_single(&pdev->dev, skb->data, skb->len,
- DMA_TO_DEVICE);
+ dma_map_single(&pdev->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
if (dma_mapping_error(&pdev->dev,
tx_ring->buffer_info[i].dma)) {
ret_val = 4;
@@ -1200,8 +1202,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
rx_ring->count = E1000_DEFAULT_RXD;
rx_ring->buffer_info = kcalloc(rx_ring->count,
- sizeof(struct e1000_buffer),
- GFP_KERNEL);
+ sizeof(struct e1000_buffer), GFP_KERNEL);
if (!rx_ring->buffer_info) {
ret_val = 5;
goto err_nomem;
@@ -1220,16 +1221,16 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
rctl = er32(RCTL);
if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
ew32(RCTL, rctl & ~E1000_RCTL_EN);
- ew32(RDBAL(0), ((u64) rx_ring->dma & 0xFFFFFFFF));
- ew32(RDBAH(0), ((u64) rx_ring->dma >> 32));
+ ew32(RDBAL(0), ((u64)rx_ring->dma & 0xFFFFFFFF));
+ ew32(RDBAH(0), ((u64)rx_ring->dma >> 32));
ew32(RDLEN(0), rx_ring->size);
ew32(RDH(0), 0);
ew32(RDT(0), 0);
rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
- E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
- E1000_RCTL_SBP | E1000_RCTL_SECRC |
- E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
- (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+ E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
+ E1000_RCTL_SBP | E1000_RCTL_SECRC |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
ew32(RCTL, rctl);
for (i = 0; i < rx_ring->count; i++) {
@@ -1244,8 +1245,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
skb_reserve(skb, NET_IP_ALIGN);
rx_ring->buffer_info[i].skb = skb;
rx_ring->buffer_info[i].dma =
- dma_map_single(&pdev->dev, skb->data, 2048,
- DMA_FROM_DEVICE);
+ dma_map_single(&pdev->dev, skb->data, 2048,
+ DMA_FROM_DEVICE);
if (dma_mapping_error(&pdev->dev,
rx_ring->buffer_info[i].dma)) {
ret_val = 8;
@@ -1296,7 +1297,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
ew32(CTRL, ctrl_reg);
e1e_flush();
- udelay(500);
+ usleep_range(500, 1000);
return 0;
}
@@ -1322,7 +1323,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
e1e_wphy(hw, PHY_REG(2, 21), phy_reg);
/* Assert SW reset for above settings to take effect */
hw->phy.ops.commit(hw);
- mdelay(1);
+ usleep_range(1000, 2000);
/* Force Full Duplex */
e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C);
@@ -1363,7 +1364,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
/* force 1000, set loopback */
e1e_wphy(hw, MII_BMCR, 0x4140);
- mdelay(250);
+ msleep(250);
/* Now set up the MAC to the same speed/duplex as the PHY. */
ctrl_reg = er32(CTRL);
@@ -1395,7 +1396,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
if (hw->phy.type == e1000_phy_m88)
e1000_phy_disable_receiver(adapter);
- udelay(500);
+ usleep_range(500, 1000);
return 0;
}
@@ -1431,8 +1432,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
/* special write to serdes control register to enable SerDes analog
* loopback
*/
-#define E1000_SERDES_LB_ON 0x410
- ew32(SCTL, E1000_SERDES_LB_ON);
+ ew32(SCTL, E1000_SCTL_ENABLE_SERDES_LOOPBACK);
e1e_flush();
usleep_range(10000, 20000);
@@ -1526,8 +1526,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
case e1000_82572:
if (hw->phy.media_type == e1000_media_type_fiber ||
hw->phy.media_type == e1000_media_type_internal_serdes) {
-#define E1000_SERDES_LB_OFF 0x400
- ew32(SCTL, E1000_SERDES_LB_OFF);
+ ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
e1e_flush();
usleep_range(10000, 20000);
break;
@@ -1564,7 +1563,7 @@ static int e1000_check_lbtest_frame(struct sk_buff *skb,
frame_size &= ~1;
if (*(skb->data + 3) == 0xFF)
if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
- (*(skb->data + frame_size / 2 + 12) == 0xAF))
+ (*(skb->data + frame_size / 2 + 12) == 0xAF))
return 0;
return 13;
}
@@ -1575,6 +1574,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
struct e1000_ring *rx_ring = &adapter->test_rx_ring;
struct pci_dev *pdev = adapter->pdev;
struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
int i, j, k, l;
int lc;
int good_cnt;
@@ -1595,14 +1595,17 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
k = 0;
l = 0;
- for (j = 0; j <= lc; j++) { /* loop count loop */
- for (i = 0; i < 64; i++) { /* send the packets */
- e1000_create_lbtest_frame(tx_ring->buffer_info[k].skb,
- 1024);
+ /* loop count loop */
+ for (j = 0; j <= lc; j++) {
+ /* send the packets */
+ for (i = 0; i < 64; i++) {
+ buffer_info = &tx_ring->buffer_info[k];
+
+ e1000_create_lbtest_frame(buffer_info->skb, 1024);
dma_sync_single_for_device(&pdev->dev,
- tx_ring->buffer_info[k].dma,
- tx_ring->buffer_info[k].length,
- DMA_TO_DEVICE);
+ buffer_info->dma,
+ buffer_info->length,
+ DMA_TO_DEVICE);
k++;
if (k == tx_ring->count)
k = 0;
@@ -1612,13 +1615,16 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
msleep(200);
time = jiffies; /* set the start time for the receive */
good_cnt = 0;
- do { /* receive the sent packets */
+ /* receive the sent packets */
+ do {
+ buffer_info = &rx_ring->buffer_info[l];
+
dma_sync_single_for_cpu(&pdev->dev,
- rx_ring->buffer_info[l].dma, 2048,
- DMA_FROM_DEVICE);
+ buffer_info->dma, 2048,
+ DMA_FROM_DEVICE);
- ret_val = e1000_check_lbtest_frame(
- rx_ring->buffer_info[l].skb, 1024);
+ ret_val = e1000_check_lbtest_frame(buffer_info->skb,
+ 1024);
if (!ret_val)
good_cnt++;
l++;
@@ -1637,7 +1643,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
ret_val = 14; /* error code for time out error */
break;
}
- } /* end loop count loop */
+ }
return ret_val;
}
@@ -1696,7 +1702,7 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
/* On some Phy/switch combinations, link establishment
* can take a few seconds more than expected.
*/
- msleep(5000);
+ msleep_interruptible(5000);
if (!(er32(STATUS) & E1000_STATUS_LU))
*data = 1;
@@ -1980,12 +1986,12 @@ static void e1000_get_ethtool_stats(struct net_device *netdev,
for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
switch (e1000_gstrings_stats[i].type) {
case NETDEV_STATS:
- p = (char *) &net_stats +
- e1000_gstrings_stats[i].stat_offset;
+ p = (char *)&net_stats +
+ e1000_gstrings_stats[i].stat_offset;
break;
case E1000_STATS:
- p = (char *) adapter +
- e1000_gstrings_stats[i].stat_offset;
+ p = (char *)adapter +
+ e1000_gstrings_stats[i].stat_offset;
break;
default:
data[i] = 0;
@@ -1993,7 +1999,7 @@ static void e1000_get_ethtool_stats(struct net_device *netdev,
}
data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
}
}
@@ -2069,23 +2075,20 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- u16 cap_addr, adv_addr, lpa_addr, pcs_stat_addr, phy_data, lpi_ctrl;
- u32 status, ret_val;
+ u16 cap_addr, lpa_addr, pcs_stat_addr, phy_data;
+ u32 ret_val;
- if (!(adapter->flags & FLAG_IS_ICH) ||
- !(adapter->flags2 & FLAG2_HAS_EEE))
+ if (!(adapter->flags2 & FLAG2_HAS_EEE))
return -EOPNOTSUPP;
switch (hw->phy.type) {
case e1000_phy_82579:
cap_addr = I82579_EEE_CAPABILITY;
- adv_addr = I82579_EEE_ADVERTISEMENT;
lpa_addr = I82579_EEE_LP_ABILITY;
pcs_stat_addr = I82579_EEE_PCS_STATUS;
break;
case e1000_phy_i217:
cap_addr = I217_EEE_CAPABILITY;
- adv_addr = I217_EEE_ADVERTISEMENT;
lpa_addr = I217_EEE_LP_ABILITY;
pcs_stat_addr = I217_EEE_PCS_STATUS;
break;
@@ -2104,10 +2107,7 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
edata->supported = mmd_eee_cap_to_ethtool_sup_t(phy_data);
/* EEE Advertised */
- ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &phy_data);
- if (ret_val)
- goto release;
- edata->advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+ edata->advertised = mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert);
/* EEE Link Partner Advertised */
ret_val = e1000_read_emi_reg_locked(hw, lpa_addr, &phy_data);
@@ -2125,25 +2125,11 @@ release:
if (ret_val)
return -ENODATA;
- e1e_rphy(hw, I82579_LPI_CTRL, &lpi_ctrl);
- status = er32(STATUS);
-
/* Result of the EEE auto negotiation - there is no register that
* has the status of the EEE negotiation so do a best-guess based
- * on whether both Tx and Rx LPI indications have been received or
- * base it on the link speed, the EEE advertised speeds on both ends
- * and the speeds on which EEE is enabled locally.
+ * on whether Tx or Rx LPI indications have been received.
*/
- if (((phy_data & E1000_EEE_TX_LPI_RCVD) &&
- (phy_data & E1000_EEE_RX_LPI_RCVD)) ||
- ((status & E1000_STATUS_SPEED_100) &&
- (edata->advertised & ADVERTISED_100baseT_Full) &&
- (edata->lp_advertised & ADVERTISED_100baseT_Full) &&
- (lpi_ctrl & I82579_LPI_CTRL_100_ENABLE)) ||
- ((status & E1000_STATUS_SPEED_1000) &&
- (edata->advertised & ADVERTISED_1000baseT_Full) &&
- (edata->lp_advertised & ADVERTISED_1000baseT_Full) &&
- (lpi_ctrl & I82579_LPI_CTRL_1000_ENABLE)))
+ if (phy_data & (E1000_EEE_TX_LPI_RCVD | E1000_EEE_RX_LPI_RCVD))
edata->eee_active = true;
edata->eee_enabled = !hw->dev_spec.ich8lan.eee_disable;
@@ -2160,19 +2146,10 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
struct ethtool_eee eee_curr;
s32 ret_val;
- if (!(adapter->flags & FLAG_IS_ICH) ||
- !(adapter->flags2 & FLAG2_HAS_EEE))
- return -EOPNOTSUPP;
-
ret_val = e1000e_get_eee(netdev, &eee_curr);
if (ret_val)
return ret_val;
- if (eee_curr.advertised != edata->advertised) {
- e_err("Setting EEE advertisement is not supported\n");
- return -EINVAL;
- }
-
if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) {
e_err("Setting EEE tx-lpi is not supported\n");
return -EINVAL;
@@ -2183,16 +2160,21 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
return -EINVAL;
}
- if (hw->dev_spec.ich8lan.eee_disable != !edata->eee_enabled) {
- hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled;
-
- /* reset the link */
- if (netif_running(netdev))
- e1000e_reinit_locked(adapter);
- else
- e1000e_reset(adapter);
+ if (edata->advertised & ~(ADVERTISE_100_FULL | ADVERTISE_1000_FULL)) {
+ e_err("EEE advertisement supports only 100TX and/or 1000T full-duplex\n");
+ return -EINVAL;
}
+ adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised);
+
+ hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled;
+
+ /* reset the link */
+ if (netif_running(netdev))
+ e1000e_reinit_locked(adapter);
+ else
+ e1000e_reset(adapter);
+
return 0;
}
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index 1e6b889..84850f7 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -167,7 +167,7 @@ enum e1000_1000t_rx_status {
e1000_1000t_rx_status_undefined = 0xFF
};
-enum e1000_rev_polarity{
+enum e1000_rev_polarity {
e1000_rev_polarity_normal = 0,
e1000_rev_polarity_reversed,
e1000_rev_polarity_undefined = 0xFF
@@ -545,7 +545,7 @@ struct e1000_mac_info {
u16 mta_reg_count;
/* Maximum size of the MTA register table in all supported adapters */
- #define MAX_MTA_REG 128
+#define MAX_MTA_REG 128
u32 mta_shadow[MAX_MTA_REG];
u16 rar_entry_count;
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 121a865..ad9d8f2 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -61,15 +61,15 @@
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
struct ich8_hsfsts {
- u16 flcdone :1; /* bit 0 Flash Cycle Done */
- u16 flcerr :1; /* bit 1 Flash Cycle Error */
- u16 dael :1; /* bit 2 Direct Access error Log */
- u16 berasesz :2; /* bit 4:3 Sector Erase Size */
- u16 flcinprog :1; /* bit 5 flash cycle in Progress */
- u16 reserved1 :2; /* bit 13:6 Reserved */
- u16 reserved2 :6; /* bit 13:6 Reserved */
- u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
- u16 flockdn :1; /* bit 15 Flash Config Lock-Down */
+ u16 flcdone:1; /* bit 0 Flash Cycle Done */
+ u16 flcerr:1; /* bit 1 Flash Cycle Error */
+ u16 dael:1; /* bit 2 Direct Access error Log */
+ u16 berasesz:2; /* bit 4:3 Sector Erase Size */
+ u16 flcinprog:1; /* bit 5 flash cycle in Progress */
+ u16 reserved1:2; /* bit 13:6 Reserved */
+ u16 reserved2:6; /* bit 13:6 Reserved */
+ u16 fldesvalid:1; /* bit 14 Flash Descriptor Valid */
+ u16 flockdn:1; /* bit 15 Flash Config Lock-Down */
} hsf_status;
u16 regval;
};
@@ -78,11 +78,11 @@ union ich8_hws_flash_status {
/* Offset 06h FLCTL */
union ich8_hws_flash_ctrl {
struct ich8_hsflctl {
- u16 flcgo :1; /* 0 Flash Cycle Go */
- u16 flcycle :2; /* 2:1 Flash Cycle */
- u16 reserved :5; /* 7:3 Reserved */
- u16 fldbcount :2; /* 9:8 Flash Data Byte Count */
- u16 flockdn :6; /* 15:10 Reserved */
+ u16 flcgo:1; /* 0 Flash Cycle Go */
+ u16 flcycle:2; /* 2:1 Flash Cycle */
+ u16 reserved:5; /* 7:3 Reserved */
+ u16 fldbcount:2; /* 9:8 Flash Data Byte Count */
+ u16 flockdn:6; /* 15:10 Reserved */
} hsf_ctrl;
u16 regval;
};
@@ -90,10 +90,10 @@ union ich8_hws_flash_ctrl {
/* ICH Flash Region Access Permissions */
union ich8_hws_flash_regacc {
struct ich8_flracc {
- u32 grra :8; /* 0:7 GbE region Read Access */
- u32 grwa :8; /* 8:15 GbE region Write Access */
- u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */
- u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */
+ u32 grra:8; /* 0:7 GbE region Read Access */
+ u32 grwa:8; /* 8:15 GbE region Write Access */
+ u32 gmrag:8; /* 23:16 GbE Master Read Access Grant */
+ u32 gmwag:8; /* 31:24 GbE Master Write Access Grant */
} hsf_flregacc;
u16 regval;
};
@@ -142,6 +142,7 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index);
static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index);
static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
+static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
@@ -312,7 +313,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
ew32(CTRL, mac_reg);
e1e_flush();
- udelay(10);
+ usleep_range(10, 20);
mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
ew32(CTRL, mac_reg);
e1e_flush();
@@ -548,8 +549,8 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
/* find total size of the NVM, then cut in half since the total
* size represents two separate NVM banks.
*/
- nvm->flash_bank_size = (sector_end_addr - sector_base_addr)
- << FLASH_SECTOR_ADDR_SHIFT;
+ nvm->flash_bank_size = ((sector_end_addr - sector_base_addr)
+ << FLASH_SECTOR_ADDR_SHIFT);
nvm->flash_bank_size /= 2;
/* Adjust to word count */
nvm->flash_bank_size /= sizeof(u16);
@@ -636,6 +637,8 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
if (mac->type == e1000_pch_lpt) {
mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES;
mac->ops.rar_set = e1000_rar_set_pch_lpt;
+ mac->ops.setup_physical_interface =
+ e1000_setup_copper_link_pch_lpt;
}
/* Enable PCS Lock-loss workaround for ICH8 */
@@ -692,7 +695,7 @@ s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data)
*
* Assumes the SW/FW/HW Semaphore is already acquired.
**/
-static s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data)
+s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data)
{
return __e1000_access_emi_reg_locked(hw, addr, &data, false);
}
@@ -709,11 +712,22 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
{
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
s32 ret_val;
- u16 lpi_ctrl;
+ u16 lpa, pcs_status, adv, adv_addr, lpi_ctrl, data;
- if ((hw->phy.type != e1000_phy_82579) &&
- (hw->phy.type != e1000_phy_i217))
+ switch (hw->phy.type) {
+ case e1000_phy_82579:
+ lpa = I82579_EEE_LP_ABILITY;
+ pcs_status = I82579_EEE_PCS_STATUS;
+ adv_addr = I82579_EEE_ADVERTISEMENT;
+ break;
+ case e1000_phy_i217:
+ lpa = I217_EEE_LP_ABILITY;
+ pcs_status = I217_EEE_PCS_STATUS;
+ adv_addr = I217_EEE_ADVERTISEMENT;
+ break;
+ default:
return 0;
+ }
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
@@ -728,34 +742,24 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
/* Enable EEE if not disabled by user */
if (!dev_spec->eee_disable) {
- u16 lpa, pcs_status, data;
-
/* Save off link partner's EEE ability */
- switch (hw->phy.type) {
- case e1000_phy_82579:
- lpa = I82579_EEE_LP_ABILITY;
- pcs_status = I82579_EEE_PCS_STATUS;
- break;
- case e1000_phy_i217:
- lpa = I217_EEE_LP_ABILITY;
- pcs_status = I217_EEE_PCS_STATUS;
- break;
- default:
- ret_val = -E1000_ERR_PHY;
- goto release;
- }
ret_val = e1000_read_emi_reg_locked(hw, lpa,
&dev_spec->eee_lp_ability);
if (ret_val)
goto release;
+ /* Read EEE advertisement */
+ ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &adv);
+ if (ret_val)
+ goto release;
+
/* Enable EEE only for speeds in which the link partner is
- * EEE capable.
+ * EEE capable and for which we advertise EEE.
*/
- if (dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED)
+ if (adv & dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED)
lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE;
- if (dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) {
+ if (adv & dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) {
e1e_rphy_locked(hw, MII_LPA, &data);
if (data & LPA_100FULL)
lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE;
@@ -767,13 +771,13 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
dev_spec->eee_lp_ability &=
~I82579_EEE_100_SUPPORTED;
}
-
- /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */
- ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data);
- if (ret_val)
- goto release;
}
+ /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */
+ ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data);
+ if (ret_val)
+ goto release;
+
ret_val = e1e_wphy_locked(hw, I82579_LPI_CTRL, lpi_ctrl);
release:
hw->phy.ops.release(hw);
@@ -835,6 +839,94 @@ release:
}
/**
+ * e1000_platform_pm_pch_lpt - Set platform power management values
+ * @hw: pointer to the HW structure
+ * @link: bool indicating link status
+ *
+ * Set the Latency Tolerance Reporting (LTR) values for the "PCIe-like"
+ * GbE MAC in the Lynx Point PCH based on Rx buffer size and link speed
+ * when link is up (which must not exceed the maximum latency supported
+ * by the platform), otherwise specify there is no LTR requirement.
+ * Unlike true-PCIe devices which set the LTR maximum snoop/no-snoop
+ * latencies in the LTR Extended Capability Structure in the PCIe Extended
+ * Capability register set, on this device LTR is set by writing the
+ * equivalent snoop/no-snoop latencies in the LTRV register in the MAC and
+ * set the SEND bit to send an Intel On-chip System Fabric sideband (IOSF-SB)
+ * message to the PMC.
+ **/
+static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link)
+{
+ u32 reg = link << (E1000_LTRV_REQ_SHIFT + E1000_LTRV_NOSNOOP_SHIFT) |
+ link << E1000_LTRV_REQ_SHIFT | E1000_LTRV_SEND;
+ u16 lat_enc = 0; /* latency encoded */
+
+ if (link) {
+ u16 speed, duplex, scale = 0;
+ u16 max_snoop, max_nosnoop;
+ u16 max_ltr_enc; /* max LTR latency encoded */
+ s64 lat_ns; /* latency (ns) */
+ s64 value;
+ u32 rxa;
+
+ if (!hw->adapter->max_frame_size) {
+ e_dbg("max_frame_size not set.\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ hw->mac.ops.get_link_up_info(hw, &speed, &duplex);
+ if (!speed) {
+ e_dbg("Speed not set.\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ /* Rx Packet Buffer Allocation size (KB) */
+ rxa = er32(PBA) & E1000_PBA_RXA_MASK;
+
+ /* Determine the maximum latency tolerated by the device.
+ *
+ * Per the PCIe spec, the tolerated latencies are encoded as
+ * a 3-bit encoded scale (only 0-5 are valid) multiplied by
+ * a 10-bit value (0-1023) to provide a range from 1 ns to
+ * 2^25*(2^10-1) ns. The scale is encoded as 0=2^0ns,
+ * 1=2^5ns, 2=2^10ns,...5=2^25ns.
+ */
+ lat_ns = ((s64)rxa * 1024 -
+ (2 * (s64)hw->adapter->max_frame_size)) * 8 * 1000;
+ if (lat_ns < 0)
+ lat_ns = 0;
+ else
+ do_div(lat_ns, speed);
+
+ value = lat_ns;
+ while (value > PCI_LTR_VALUE_MASK) {
+ scale++;
+ value = DIV_ROUND_UP(value, (1 << 5));
+ }
+ if (scale > E1000_LTRV_SCALE_MAX) {
+ e_dbg("Invalid LTR latency scale %d\n", scale);
+ return -E1000_ERR_CONFIG;
+ }
+ lat_enc = (u16)((scale << PCI_LTR_SCALE_SHIFT) | value);
+
+ /* Determine the maximum latency tolerated by the platform */
+ pci_read_config_word(hw->adapter->pdev, E1000_PCI_LTR_CAP_LPT,
+ &max_snoop);
+ pci_read_config_word(hw->adapter->pdev,
+ E1000_PCI_LTR_CAP_LPT + 2, &max_nosnoop);
+ max_ltr_enc = max_t(u16, max_snoop, max_nosnoop);
+
+ if (lat_enc > max_ltr_enc)
+ lat_enc = max_ltr_enc;
+ }
+
+ /* Set Snoop and No-Snoop latencies the same */
+ reg |= lat_enc | (lat_enc << E1000_LTRV_NOSNOOP_SHIFT);
+ ew32(LTRV, reg);
+
+ return 0;
+}
+
+/**
* e1000_check_for_copper_link_ich8lan - Check for link (Copper)
* @hw: pointer to the HW structure
*
@@ -871,6 +963,34 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
return ret_val;
}
+ /* When connected at 10Mbps half-duplex, 82579 parts are excessively
+ * aggressive resulting in many collisions. To avoid this, increase
+ * the IPG and reduce Rx latency in the PHY.
+ */
+ if ((hw->mac.type == e1000_pch2lan) && link) {
+ u32 reg;
+ reg = er32(STATUS);
+ if (!(reg & (E1000_STATUS_FD | E1000_STATUS_SPEED_MASK))) {
+ reg = er32(TIPG);
+ reg &= ~E1000_TIPG_IPGT_MASK;
+ reg |= 0xFF;
+ ew32(TIPG, reg);
+
+ /* Reduce Rx latency in analog PHY */
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000_write_emi_reg_locked(hw, I82579_RX_CONFIG, 0);
+
+ hw->phy.ops.release(hw);
+
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
/* Work-around I218 hang issue */
if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
(hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
@@ -879,6 +999,15 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
return ret_val;
}
+ if (hw->mac.type == e1000_pch_lpt) {
+ /* Set platform power management values for
+ * Latency Tolerance Reporting (LTR)
+ */
+ ret_val = e1000_platform_pm_pch_lpt(hw, link);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Clear link partner's EEE ability */
hw->dev_spec.ich8lan.eee_lp_ability = 0;
@@ -1002,10 +1131,6 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA;
- /* Disable EEE by default until IEEE802.3az spec is finalized */
- if (adapter->flags2 & FLAG2_HAS_EEE)
- adapter->hw.dev_spec.ich8lan.eee_disable = true;
-
return 0;
}
@@ -1134,9 +1259,9 @@ static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
u32 fwsm;
fwsm = er32(FWSM);
- return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
- ((fwsm & E1000_FWSM_MODE_MASK) ==
- (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+ return ((fwsm & E1000_ICH_FWSM_FW_VALID) &&
+ ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)));
}
/**
@@ -1153,7 +1278,7 @@ static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw)
fwsm = er32(FWSM);
return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
- (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+ (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
}
/**
@@ -1440,8 +1565,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
word_addr = (u16)(cnf_base_addr << 1);
for (i = 0; i < cnf_size; i++) {
- ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
- &reg_data);
+ ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, &reg_data);
if (ret_val)
goto release;
@@ -1501,13 +1625,13 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
if (ret_val)
goto release;
- status_reg &= BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_MASK;
+ status_reg &= (BM_CS_STATUS_LINK_UP |
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK);
if (status_reg == (BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_1000))
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
k1_enable = false;
}
@@ -1516,13 +1640,13 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
if (ret_val)
goto release;
- status_reg &= HV_M_STATUS_LINK_UP |
- HV_M_STATUS_AUTONEG_COMPLETE |
- HV_M_STATUS_SPEED_MASK;
+ status_reg &= (HV_M_STATUS_LINK_UP |
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_MASK);
if (status_reg == (HV_M_STATUS_LINK_UP |
- HV_M_STATUS_AUTONEG_COMPLETE |
- HV_M_STATUS_SPEED_1000))
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_1000))
k1_enable = false;
}
@@ -1579,7 +1703,7 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
if (ret_val)
return ret_val;
- udelay(20);
+ usleep_range(20, 40);
ctrl_ext = er32(CTRL_EXT);
ctrl_reg = er32(CTRL);
@@ -1589,11 +1713,11 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
e1e_flush();
- udelay(20);
+ usleep_range(20, 40);
ew32(CTRL, ctrl_reg);
ew32(CTRL_EXT, ctrl_ext);
e1e_flush();
- udelay(20);
+ usleep_range(20, 40);
return 0;
}
@@ -1667,7 +1791,6 @@ release:
return ret_val;
}
-
/**
* e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
* @hw: pointer to the HW structure
@@ -1834,7 +1957,7 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
* SHRAL/H) and initial CRC values to the MAC
*/
for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
- u8 mac_addr[ETH_ALEN] = {0};
+ u8 mac_addr[ETH_ALEN] = { 0 };
u32 addr_high, addr_low;
addr_high = er32(RAH(i));
@@ -1865,8 +1988,8 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
ew32(RCTL, mac_reg);
ret_val = e1000e_read_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_CTRL_OFFSET,
- &data);
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ &data);
if (ret_val)
return ret_val;
ret_val = e1000e_write_kmrn_reg(hw,
@@ -1875,8 +1998,8 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
if (ret_val)
return ret_val;
ret_val = e1000e_read_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_HD_CTRL,
- &data);
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ &data);
if (ret_val)
return ret_val;
data &= ~(0xF << 8);
@@ -1923,8 +2046,8 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
ew32(RCTL, mac_reg);
ret_val = e1000e_read_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_CTRL_OFFSET,
- &data);
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ &data);
if (ret_val)
return ret_val;
ret_val = e1000e_write_kmrn_reg(hw,
@@ -1933,8 +2056,8 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
if (ret_val)
return ret_val;
ret_val = e1000e_read_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_HD_CTRL,
- &data);
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ &data);
if (ret_val)
return ret_val;
data &= ~(0xF << 8);
@@ -2100,7 +2223,7 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
do {
data = er32(STATUS);
data &= E1000_STATUS_LAN_INIT_DONE;
- udelay(100);
+ usleep_range(100, 200);
} while ((!data) && --loop);
/* If basic configuration is incomplete before the above loop
@@ -2445,7 +2568,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
/* Check bank 0 */
ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset,
- &sig_byte);
+ &sig_byte);
if (ret_val)
return ret_val;
if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
@@ -2456,8 +2579,8 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
/* Check bank 1 */
ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset +
- bank1_offset,
- &sig_byte);
+ bank1_offset,
+ &sig_byte);
if (ret_val)
return ret_val;
if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
@@ -2510,8 +2633,8 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
ret_val = 0;
for (i = 0; i < words; i++) {
- if (dev_spec->shadow_ram[offset+i].modified) {
- data[i] = dev_spec->shadow_ram[offset+i].value;
+ if (dev_spec->shadow_ram[offset + i].modified) {
+ data[i] = dev_spec->shadow_ram[offset + i].value;
} else {
ret_val = e1000_read_flash_word_ich8lan(hw,
act_offset + i,
@@ -2696,8 +2819,8 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
return -E1000_ERR_NVM;
- flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) +
- hw->nvm.flash_base_addr;
+ flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) +
+ hw->nvm.flash_base_addr);
do {
udelay(1);
@@ -2714,8 +2837,9 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
- ret_val = e1000_flash_cycle_ich8lan(hw,
- ICH_FLASH_READ_COMMAND_TIMEOUT);
+ ret_val =
+ e1000_flash_cycle_ich8lan(hw,
+ ICH_FLASH_READ_COMMAND_TIMEOUT);
/* Check if FCERR is set to 1, if set to 1, clear it
* and try the whole sequence a few more times, else
@@ -2774,8 +2898,8 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
nvm->ops.acquire(hw);
for (i = 0; i < words; i++) {
- dev_spec->shadow_ram[offset+i].modified = true;
- dev_spec->shadow_ram[offset+i].value = data[i];
+ dev_spec->shadow_ram[offset + i].modified = true;
+ dev_spec->shadow_ram[offset + i].value = data[i];
}
nvm->ops.release(hw);
@@ -2844,8 +2968,8 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
data = dev_spec->shadow_ram[i].value;
} else {
ret_val = e1000_read_flash_word_ich8lan(hw, i +
- old_bank_offset,
- &data);
+ old_bank_offset,
+ &data);
if (ret_val)
break;
}
@@ -2863,7 +2987,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
/* Convert offset to bytes. */
act_offset = (i + new_bank_offset) << 1;
- udelay(100);
+ usleep_range(100, 200);
/* Write the bytes to the new bank. */
ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
act_offset,
@@ -2871,10 +2995,10 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
if (ret_val)
break;
- udelay(100);
+ usleep_range(100, 200);
ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
- act_offset + 1,
- (u8)(data >> 8));
+ act_offset + 1,
+ (u8)(data >> 8));
if (ret_val)
break;
}
@@ -3050,8 +3174,8 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
offset > ICH_FLASH_LINEAR_ADDR_MASK)
return -E1000_ERR_NVM;
- flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) +
- hw->nvm.flash_base_addr;
+ flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) +
+ hw->nvm.flash_base_addr);
do {
udelay(1);
@@ -3062,7 +3186,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
/* 0b/1b corresponds to 1 or 2 byte size, respectively. */
- hsflctl.hsf_ctrl.fldbcount = size -1;
+ hsflctl.hsf_ctrl.fldbcount = size - 1;
hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
@@ -3078,8 +3202,9 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
/* check if FCERR is set to 1 , if set to 1, clear it
* and try the whole sequence a few more times else done
*/
- ret_val = e1000_flash_cycle_ich8lan(hw,
- ICH_FLASH_WRITE_COMMAND_TIMEOUT);
+ ret_val =
+ e1000_flash_cycle_ich8lan(hw,
+ ICH_FLASH_WRITE_COMMAND_TIMEOUT);
if (!ret_val)
break;
@@ -3138,7 +3263,7 @@ static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
for (program_retries = 0; program_retries < 100; program_retries++) {
e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset);
- udelay(100);
+ usleep_range(100, 200);
ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
if (!ret_val)
break;
@@ -3209,8 +3334,10 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
flash_linear_addr = hw->nvm.flash_base_addr;
flash_linear_addr += (bank) ? flash_bank_size : 0;
- for (j = 0; j < iteration ; j++) {
+ for (j = 0; j < iteration; j++) {
do {
+ u32 timeout = ICH_FLASH_ERASE_COMMAND_TIMEOUT;
+
/* Steps */
ret_val = e1000_flash_cycle_init_ich8lan(hw);
if (ret_val)
@@ -3230,8 +3357,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
flash_linear_addr += (j * sector_size);
ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
- ret_val = e1000_flash_cycle_ich8lan(hw,
- ICH_FLASH_ERASE_COMMAND_TIMEOUT);
+ ret_val = e1000_flash_cycle_ich8lan(hw, timeout);
if (!ret_val)
break;
@@ -3270,8 +3396,7 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
return ret_val;
}
- if (*data == ID_LED_RESERVED_0000 ||
- *data == ID_LED_RESERVED_FFFF)
+ if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
*data = ID_LED_DEFAULT_ICH8LAN;
return 0;
@@ -3511,9 +3636,9 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
/* Initialize identification LED */
ret_val = mac->ops.id_led_init(hw);
+ /* An error is not fatal and we should not stop init due to this */
if (ret_val)
e_dbg("Error initializing identification LED\n");
- /* This is not fatal and we should not stop init due to this */
/* Setup the receive address. */
e1000e_init_rx_addrs(hw, mac->rar_entry_count);
@@ -3541,16 +3666,16 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
/* Set the transmit descriptor write-back policy for both queues */
txdctl = er32(TXDCTL(0));
- txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB;
- txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
- E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
+ txdctl = ((txdctl & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB);
+ txdctl = ((txdctl & ~E1000_TXDCTL_PTHRESH) |
+ E1000_TXDCTL_MAX_TX_DESC_PREFETCH);
ew32(TXDCTL(0), txdctl);
txdctl = er32(TXDCTL(1));
- txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB;
- txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
- E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
+ txdctl = ((txdctl & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB);
+ txdctl = ((txdctl & ~E1000_TXDCTL_PTHRESH) |
+ E1000_TXDCTL_MAX_TX_DESC_PREFETCH);
ew32(TXDCTL(1), txdctl);
/* ICH8 has opposite polarity of no_snoop bits.
@@ -3559,7 +3684,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
if (mac->type == e1000_ich8lan)
snoop = PCIE_ICH8_SNOOP_ALL;
else
- snoop = (u32) ~(PCIE_NO_SNOOP_ALL);
+ snoop = (u32)~(PCIE_NO_SNOOP_ALL);
e1000e_set_pcie_no_snoop(hw, snoop);
ctrl_ext = er32(CTRL_EXT);
@@ -3575,6 +3700,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
return ret_val;
}
+
/**
* e1000_initialize_hw_bits_ich8lan - Initialize required hardware bits
* @hw: pointer to the HW structure
@@ -3686,8 +3812,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
*/
hw->fc.current_mode = hw->fc.requested_mode;
- e_dbg("After fix-ups FlowControl is now = %x\n",
- hw->fc.current_mode);
+ e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);
/* Continue to configure the copper link. */
ret_val = hw->mac.ops.setup_physical_interface(hw);
@@ -3737,12 +3862,12 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- &reg_data);
+ &reg_data);
if (ret_val)
return ret_val;
reg_data |= 0x3F;
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- reg_data);
+ reg_data);
if (ret_val)
return ret_val;
@@ -3760,7 +3885,6 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
break;
case e1000_phy_82577:
case e1000_phy_82579:
- case e1000_phy_i217:
ret_val = e1000_copper_link_setup_82577(hw);
if (ret_val)
return ret_val;
@@ -3796,6 +3920,31 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
}
/**
+ * e1000_setup_copper_link_pch_lpt - Configure MAC/PHY interface
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY specific link setup function and then calls the
+ * generic setup_copper_link to finish configuring the link for
+ * Lynxpoint PCH devices
+ **/
+static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ew32(CTRL, ctrl);
+
+ ret_val = e1000_copper_link_setup_82577(hw);
+ if (ret_val)
+ return ret_val;
+
+ return e1000e_setup_copper_link(hw);
+}
+
+/**
* e1000_get_link_up_info_ich8lan - Get current link speed and duplex
* @hw: pointer to the HW structure
* @speed: pointer to store current link speed
@@ -3815,8 +3964,7 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
return ret_val;
if ((hw->mac.type == e1000_ich8lan) &&
- (hw->phy.type == e1000_phy_igp_3) &&
- (*speed == SPEED_1000)) {
+ (hw->phy.type == e1000_phy_igp_3) && (*speed == SPEED_1000)) {
ret_val = e1000_kmrn_lock_loss_workaround_ich8lan(hw);
}
@@ -3899,7 +4047,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
* /disabled - false).
**/
void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
- bool state)
+ bool state)
{
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
@@ -3981,12 +4129,12 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
return;
ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
- &reg_data);
+ &reg_data);
if (ret_val)
return;
reg_data |= E1000_KMRNCTRLSTA_DIAG_NELPBK;
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
- reg_data);
+ reg_data);
if (ret_val)
return;
reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK;
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index 8bf4655..80034a2 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -211,7 +211,8 @@
#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */
#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */
#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */
-#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */
+#define I82579_RX_CONFIG 0x3412 /* Receive configuration */
+#define I82579_EEE_PCS_STATUS 0x182E /* IEEE MMD Register 3.1 >> 8 */
#define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */
#define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */
#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */
@@ -249,13 +250,6 @@
/* Proprietary Latency Tolerance Reporting PCI Capability */
#define E1000_PCI_LTR_CAP_LPT 0xA8
-/* OBFF Control & Threshold Defines */
-#define E1000_SVCR_OFF_EN 0x00000001
-#define E1000_SVCR_OFF_MASKINT 0x00001000
-#define E1000_SVCR_OFF_TIMER_MASK 0xFFFF0000
-#define E1000_SVCR_OFF_TIMER_SHIFT 16
-#define E1000_SVT_OFF_HWM_MASK 0x0000001F
-
void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
bool state);
@@ -267,4 +261,5 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
+s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data);
#endif /* _E1000E_ICH8LAN_H_ */
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index b78e021..2480c10 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -596,7 +596,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
* serdes media type.
*/
/* SYNCH bit and IV bit are sticky. */
- udelay(10);
+ usleep_range(10, 20);
rxcw = er32(RXCW);
if (rxcw & E1000_RXCW_SYNCH) {
if (!(rxcw & E1000_RXCW_IV)) {
@@ -613,7 +613,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
status = er32(STATUS);
if (status & E1000_STATUS_LU) {
/* SYNCH bit and IV bit are sticky, so reread rxcw. */
- udelay(10);
+ usleep_range(10, 20);
rxcw = er32(RXCW);
if (rxcw & E1000_RXCW_SYNCH) {
if (!(rxcw & E1000_RXCW_IV)) {
@@ -1382,7 +1382,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
if (!(swsm & E1000_SWSM_SMBI))
break;
- udelay(50);
+ usleep_range(50, 100);
i++;
}
@@ -1400,7 +1400,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
if (er32(SWSM) & E1000_SWSM_SWESMBI)
break;
- udelay(50);
+ usleep_range(50, 100);
}
if (i == timeout) {
@@ -1600,15 +1600,28 @@ s32 e1000e_blink_led_generic(struct e1000_hw *hw)
ledctl_blink = E1000_LEDCTL_LED0_BLINK |
(E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
} else {
- /* set the blink bit for each LED that's "on" (0x0E)
- * in ledctl_mode2
+ /* Set the blink bit for each LED that's "on" (0x0E)
+ * (or "off" if inverted) in ledctl_mode2. The blink
+ * logic in hardware only works when mode is set to "on"
+ * so it must be changed accordingly when the mode is
+ * "off" and inverted.
*/
ledctl_blink = hw->mac.ledctl_mode2;
- for (i = 0; i < 4; i++)
- if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
- E1000_LEDCTL_MODE_LED_ON)
- ledctl_blink |= (E1000_LEDCTL_LED0_BLINK <<
- (i * 8));
+ for (i = 0; i < 32; i += 8) {
+ u32 mode = (hw->mac.ledctl_mode2 >> i) &
+ E1000_LEDCTL_LED0_MODE_MASK;
+ u32 led_default = hw->mac.ledctl_default >> i;
+
+ if ((!(led_default & E1000_LEDCTL_LED0_IVRT) &&
+ (mode == E1000_LEDCTL_MODE_LED_ON)) ||
+ ((led_default & E1000_LEDCTL_LED0_IVRT) &&
+ (mode == E1000_LEDCTL_MODE_LED_OFF))) {
+ ledctl_blink &=
+ ~(E1000_LEDCTL_LED0_MODE_MASK << i);
+ ledctl_blink |= (E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_MODE_LED_ON) << i;
+ }
+ }
}
ew32(LEDCTL, ledctl_blink);
@@ -1712,7 +1725,7 @@ s32 e1000e_disable_pcie_master(struct e1000_hw *hw)
while (timeout) {
if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
break;
- udelay(100);
+ usleep_range(100, 200);
timeout--;
}
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 7e615e2..a27e3bc 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -55,7 +55,7 @@
#define DRV_EXTRAVERSION "-k"
-#define DRV_VERSION "2.2.14" DRV_EXTRAVERSION
+#define DRV_VERSION "2.3.2" DRV_EXTRAVERSION
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
@@ -219,9 +219,8 @@ static void e1000e_dump(struct e1000_adapter *adapter)
if (netdev) {
dev_info(&adapter->pdev->dev, "Net device Info\n");
pr_info("Device Name state trans_start last_rx\n");
- pr_info("%-15s %016lX %016lX %016lX\n",
- netdev->name, netdev->state, netdev->trans_start,
- netdev->last_rx);
+ pr_info("%-15s %016lX %016lX %016lX\n", netdev->name,
+ netdev->state, netdev->trans_start, netdev->last_rx);
}
/* Print Registers */
@@ -555,7 +554,7 @@ static void e1000_receive_skb(struct e1000_adapter *adapter,
skb->protocol = eth_type_trans(skb, netdev);
if (staterr & E1000_RXD_STAT_VP)
- __vlan_hwaccel_put_tag(skb, tag);
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tag);
napi_gro_receive(&adapter->napi, skb);
}
@@ -755,8 +754,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_ring *rx_ring,
cpu_to_le64(ps_page->dma);
}
- skb = __netdev_alloc_skb_ip_align(netdev,
- adapter->rx_ps_bsize0,
+ skb = __netdev_alloc_skb_ip_align(netdev, adapter->rx_ps_bsize0,
gfp);
if (!skb) {
@@ -850,8 +848,8 @@ check_page:
if (!buffer_info->dma) {
buffer_info->dma = dma_map_page(&pdev->dev,
- buffer_info->page, 0,
- PAGE_SIZE,
+ buffer_info->page, 0,
+ PAGE_SIZE,
DMA_FROM_DEVICE);
if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
adapter->alloc_rx_buff_failed++;
@@ -942,10 +940,8 @@ static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done,
cleaned = true;
cleaned_count++;
- dma_unmap_single(&pdev->dev,
- buffer_info->dma,
- adapter->rx_buffer_len,
- DMA_FROM_DEVICE);
+ dma_unmap_single(&pdev->dev, buffer_info->dma,
+ adapter->rx_buffer_len, DMA_FROM_DEVICE);
buffer_info->dma = 0;
length = le16_to_cpu(rx_desc->wb.upper.length);
@@ -1073,8 +1069,8 @@ static void e1000_put_txbuf(struct e1000_ring *tx_ring,
static void e1000_print_hw_hang(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter,
- print_hang_task);
+ struct e1000_adapter,
+ print_hang_task);
struct net_device *netdev = adapter->netdev;
struct e1000_ring *tx_ring = adapter->tx_ring;
unsigned int i = tx_ring->next_to_clean;
@@ -1087,8 +1083,7 @@ static void e1000_print_hw_hang(struct work_struct *work)
if (test_bit(__E1000_DOWN, &adapter->state))
return;
- if (!adapter->tx_hang_recheck &&
- (adapter->flags2 & FLAG2_DMA_BURST)) {
+ if (!adapter->tx_hang_recheck && (adapter->flags2 & FLAG2_DMA_BURST)) {
/* May be block on write-back, flush and detect again
* flush pending descriptor writebacks to memory
*/
@@ -1130,19 +1125,10 @@ static void e1000_print_hw_hang(struct work_struct *work)
"PHY 1000BASE-T Status <%x>\n"
"PHY Extended Status <%x>\n"
"PCI Status <%x>\n",
- readl(tx_ring->head),
- readl(tx_ring->tail),
- tx_ring->next_to_use,
- tx_ring->next_to_clean,
- tx_ring->buffer_info[eop].time_stamp,
- eop,
- jiffies,
- eop_desc->upper.fields.status,
- er32(STATUS),
- phy_status,
- phy_1000t_status,
- phy_ext_status,
- pci_status);
+ readl(tx_ring->head), readl(tx_ring->tail), tx_ring->next_to_use,
+ tx_ring->next_to_clean, tx_ring->buffer_info[eop].time_stamp,
+ eop, jiffies, eop_desc->upper.fields.status, er32(STATUS),
+ phy_status, phy_1000t_status, phy_ext_status, pci_status);
/* Suggest workaround for known h/w issue */
if ((hw->mac.type == e1000_pchlan) && (er32(CTRL) & E1000_CTRL_TFCE))
@@ -1435,7 +1421,7 @@ copydone:
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
if (rx_desc->wb.upper.header_status &
- cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
+ cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
adapter->rx_hdr_split++;
e1000_receive_skb(adapter, netdev, skb, staterr,
@@ -1473,7 +1459,7 @@ next_desc:
* e1000_consume_page - helper function
**/
static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
- u16 length)
+ u16 length)
{
bi->page = NULL;
skb->len += length;
@@ -1500,7 +1486,8 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done,
unsigned int i;
int cleaned_count = 0;
bool cleaned = false;
- unsigned int total_rx_bytes=0, total_rx_packets=0;
+ unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+ struct skb_shared_info *shinfo;
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
@@ -1546,7 +1533,6 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done,
rx_ring->rx_skb_top = NULL;
goto next_desc;
}
-
#define rxtop (rx_ring->rx_skb_top)
if (!(staterr & E1000_RXD_STAT_EOP)) {
/* this descriptor is only the beginning (or middle) */
@@ -1554,12 +1540,13 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done,
/* this is the beginning of a chain */
rxtop = skb;
skb_fill_page_desc(rxtop, 0, buffer_info->page,
- 0, length);
+ 0, length);
} else {
/* this is the middle of a chain */
- skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->page, 0, length);
+ shinfo = skb_shinfo(rxtop);
+ skb_fill_page_desc(rxtop, shinfo->nr_frags,
+ buffer_info->page, 0,
+ length);
/* re-use the skb, only consumed the page */
buffer_info->skb = skb;
}
@@ -1568,9 +1555,10 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done,
} else {
if (rxtop) {
/* end of the chain */
- skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->page, 0, length);
+ shinfo = skb_shinfo(rxtop);
+ skb_fill_page_desc(rxtop, shinfo->nr_frags,
+ buffer_info->page, 0,
+ length);
/* re-use the current skb, we only consumed the
* page
*/
@@ -1595,10 +1583,10 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done,
skb_put(skb, length);
} else {
skb_fill_page_desc(skb, 0,
- buffer_info->page, 0,
- length);
+ buffer_info->page, 0,
+ length);
e1000_consume_page(buffer_info, skb,
- length);
+ length);
}
}
}
@@ -1671,8 +1659,7 @@ static void e1000_clean_rx_ring(struct e1000_ring *rx_ring)
DMA_FROM_DEVICE);
else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
dma_unmap_page(&pdev->dev, buffer_info->dma,
- PAGE_SIZE,
- DMA_FROM_DEVICE);
+ PAGE_SIZE, DMA_FROM_DEVICE);
else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
dma_unmap_single(&pdev->dev, buffer_info->dma,
adapter->rx_ps_bsize0,
@@ -1725,7 +1712,8 @@ static void e1000_clean_rx_ring(struct e1000_ring *rx_ring)
static void e1000e_downshift_workaround(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, downshift_task);
+ struct e1000_adapter,
+ downshift_task);
if (test_bit(__E1000_DOWN, &adapter->state))
return;
@@ -1918,7 +1906,6 @@ static irqreturn_t e1000_intr_msix_tx(int __always_unused irq, void *data)
struct e1000_hw *hw = &adapter->hw;
struct e1000_ring *tx_ring = adapter->tx_ring;
-
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
@@ -1975,7 +1962,6 @@ static void e1000_configure_msix(struct e1000_adapter *adapter)
ew32(RFCTL, rfctl);
}
-#define E1000_IVAR_INT_ALLOC_VALID 0x8
/* Configure Rx vector */
rx_ring->ims_val = E1000_IMS_RXQ0;
adapter->eiac_mask |= rx_ring->ims_val;
@@ -2050,8 +2036,9 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
if (adapter->flags & FLAG_HAS_MSIX) {
adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */
adapter->msix_entries = kcalloc(adapter->num_vectors,
- sizeof(struct msix_entry),
- GFP_KERNEL);
+ sizeof(struct
+ msix_entry),
+ GFP_KERNEL);
if (adapter->msix_entries) {
for (i = 0; i < adapter->num_vectors; i++)
adapter->msix_entries[i].entry = i;
@@ -2495,7 +2482,7 @@ static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes)
switch (itr_setting) {
case lowest_latency:
/* handle TSO and jumbo frames */
- if (bytes/packets > 8000)
+ if (bytes / packets > 8000)
retval = bulk_latency;
else if ((packets < 5) && (bytes > 512))
retval = low_latency;
@@ -2503,13 +2490,13 @@ static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes)
case low_latency: /* 50 usec aka 20000 ints/s */
if (bytes > 10000) {
/* this if handles the TSO accounting */
- if (bytes/packets > 8000)
+ if (bytes / packets > 8000)
retval = bulk_latency;
- else if ((packets < 10) || ((bytes/packets) > 1200))
+ else if ((packets < 10) || ((bytes / packets) > 1200))
retval = bulk_latency;
else if ((packets > 35))
retval = lowest_latency;
- } else if (bytes/packets > 2000) {
+ } else if (bytes / packets > 2000) {
retval = bulk_latency;
} else if (packets <= 2 && bytes < 512) {
retval = lowest_latency;
@@ -2561,8 +2548,8 @@ static void e1000_set_itr(struct e1000_adapter *adapter)
current_itr = max(adapter->rx_itr, adapter->tx_itr);
- switch (current_itr) {
/* counts and packets in update_itr are dependent on these numbers */
+ switch (current_itr) {
case lowest_latency:
new_itr = 70000;
break;
@@ -2583,8 +2570,7 @@ set_itr_now:
* increasing
*/
new_itr = new_itr > adapter->itr ?
- min(adapter->itr + (new_itr >> 2), new_itr) :
- new_itr;
+ min(adapter->itr + (new_itr >> 2), new_itr) : new_itr;
adapter->itr = new_itr;
adapter->rx_ring->itr_val = new_itr;
if (adapter->msix_entries)
@@ -2686,7 +2672,8 @@ static int e1000e_poll(struct napi_struct *napi, int weight)
return work_done;
}
-static int e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+static int e1000_vlan_rx_add_vid(struct net_device *netdev,
+ __be16 proto, u16 vid)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
@@ -2711,7 +2698,8 @@ static int e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
return 0;
}
-static int e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+static int e1000_vlan_rx_kill_vid(struct net_device *netdev,
+ __be16 proto, u16 vid)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
@@ -2755,7 +2743,8 @@ static void e1000e_vlan_filter_disable(struct e1000_adapter *adapter)
ew32(RCTL, rctl);
if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
- e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q),
+ adapter->mng_vlan_id);
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
}
}
@@ -2815,24 +2804,23 @@ static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
u16 vid = adapter->hw.mng_cookie.vlan_id;
u16 old_vid = adapter->mng_vlan_id;
- if (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
- e1000_vlan_rx_add_vid(netdev, vid);
+ if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+ e1000_vlan_rx_add_vid(netdev, htons(ETH_P_8021Q), vid);
adapter->mng_vlan_id = vid;
}
if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid))
- e1000_vlan_rx_kill_vid(netdev, old_vid);
+ e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q), old_vid);
}
static void e1000_restore_vlan(struct e1000_adapter *adapter)
{
u16 vid;
- e1000_vlan_rx_add_vid(adapter->netdev, 0);
+ e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), 0);
for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- e1000_vlan_rx_add_vid(adapter->netdev, vid);
+ e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
}
static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
@@ -3007,8 +2995,8 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
rctl = er32(RCTL);
rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
- E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
- (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
/* Do not Store bad packets */
rctl &= ~E1000_RCTL_SBP;
@@ -3094,19 +3082,17 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
/* Enable Packet split descriptors */
rctl |= E1000_RCTL_DTYP_PS;
- psrctl |= adapter->rx_ps_bsize0 >>
- E1000_PSRCTL_BSIZE0_SHIFT;
+ psrctl |= adapter->rx_ps_bsize0 >> E1000_PSRCTL_BSIZE0_SHIFT;
switch (adapter->rx_ps_pages) {
case 3:
- psrctl |= PAGE_SIZE <<
- E1000_PSRCTL_BSIZE3_SHIFT;
+ psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE3_SHIFT;
+ /* fall-through */
case 2:
- psrctl |= PAGE_SIZE <<
- E1000_PSRCTL_BSIZE2_SHIFT;
+ psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE2_SHIFT;
+ /* fall-through */
case 1:
- psrctl |= PAGE_SIZE >>
- E1000_PSRCTL_BSIZE1_SHIFT;
+ psrctl |= PAGE_SIZE >> E1000_PSRCTL_BSIZE1_SHIFT;
break;
}
@@ -3280,7 +3266,7 @@ static int e1000e_write_mc_addr_list(struct net_device *netdev)
/* update_mc_addr_list expects a packed array of only addresses. */
i = 0;
netdev_for_each_mc_addr(ha, netdev)
- memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+ memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
hw->mac.ops.update_mc_addr_list(hw, mta_list, i);
kfree(mta_list);
@@ -3390,7 +3376,7 @@ static void e1000e_set_rx_mode(struct net_device *netdev)
ew32(RCTL, rctl);
- if (netdev->features & NETIF_F_HW_VLAN_RX)
+ if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
e1000e_vlan_strip_enable(adapter);
else
e1000e_vlan_strip_disable(adapter);
@@ -3757,8 +3743,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
* but don't include ethernet FCS because hardware appends it
*/
min_tx_space = (adapter->max_frame_size +
- sizeof(struct e1000_tx_desc) -
- ETH_FCS_LEN) * 2;
+ sizeof(struct e1000_tx_desc) - ETH_FCS_LEN) * 2;
min_tx_space = ALIGN(min_tx_space, 1024);
min_tx_space >>= 10;
/* software strips receive CRC, so leave room for it */
@@ -3861,13 +3846,13 @@ void e1000e_reset(struct e1000_adapter *adapter)
if ((adapter->max_frame_size * 2) > (pba << 10)) {
if (!(adapter->flags2 & FLAG2_DISABLE_AIM)) {
dev_info(&adapter->pdev->dev,
- "Interrupt Throttle Rate turned off\n");
+ "Interrupt Throttle Rate off\n");
adapter->flags2 |= FLAG2_DISABLE_AIM;
e1000e_write_itr(adapter, 0);
}
} else if (adapter->flags2 & FLAG2_DISABLE_AIM) {
dev_info(&adapter->pdev->dev,
- "Interrupt Throttle Rate turned on\n");
+ "Interrupt Throttle Rate on\n");
adapter->flags2 &= ~FLAG2_DISABLE_AIM;
adapter->itr = 20000;
e1000e_write_itr(adapter, adapter->itr);
@@ -3898,6 +3883,38 @@ void e1000e_reset(struct e1000_adapter *adapter)
/* initialize systim and reset the ns time counter */
e1000e_config_hwtstamp(adapter);
+ /* Set EEE advertisement as appropriate */
+ if (adapter->flags2 & FLAG2_HAS_EEE) {
+ s32 ret_val;
+ u16 adv_addr;
+
+ switch (hw->phy.type) {
+ case e1000_phy_82579:
+ adv_addr = I82579_EEE_ADVERTISEMENT;
+ break;
+ case e1000_phy_i217:
+ adv_addr = I217_EEE_ADVERTISEMENT;
+ break;
+ default:
+ dev_err(&adapter->pdev->dev,
+ "Invalid PHY type setting EEE advertisement\n");
+ return;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val) {
+ dev_err(&adapter->pdev->dev,
+ "EEE advertisement - unable to acquire PHY\n");
+ return;
+ }
+
+ e1000_write_emi_reg_locked(hw, adv_addr,
+ hw->dev_spec.ich8lan.eee_disable ?
+ 0 : adapter->eee_advert);
+
+ hw->phy.ops.release(hw);
+ }
+
if (!netif_running(adapter->netdev) &&
!test_bit(__E1000_TESTING, &adapter->state)) {
e1000_power_down_phy(adapter);
@@ -3999,6 +4016,8 @@ void e1000e_down(struct e1000_adapter *adapter)
e1000_irq_disable(adapter);
+ napi_synchronize(&adapter->napi);
+
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
@@ -4266,8 +4285,7 @@ static int e1000_open(struct net_device *netdev)
e1000e_power_up_phy(adapter);
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
- if ((adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
+ if ((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
e1000_update_mng_vlan(adapter);
/* DMA latency requirement to workaround jumbo issue */
@@ -4356,12 +4374,13 @@ static int e1000_close(struct net_device *netdev)
pm_runtime_get_sync(&pdev->dev);
- napi_disable(&adapter->napi);
-
if (!test_bit(__E1000_DOWN, &adapter->state)) {
e1000e_down(adapter);
e1000_free_irq(adapter);
}
+
+ napi_disable(&adapter->napi);
+
e1000_power_down_phy(adapter);
e1000e_free_tx_resources(adapter->tx_ring);
@@ -4370,9 +4389,9 @@ static int e1000_close(struct net_device *netdev)
/* kill manageability vlan ID if supported, but not if a vlan with
* the same ID is registered on the host OS (let 8021q kill it)
*/
- if (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN)
- e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN)
+ e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q),
+ adapter->mng_vlan_id);
/* If AMT is enabled, let the firmware know that the network
* interface is now closed
@@ -4387,6 +4406,7 @@ static int e1000_close(struct net_device *netdev)
return 0;
}
+
/**
* e1000_set_mac - Change the Ethernet Address of the NIC
* @netdev: network interface device structure
@@ -4437,7 +4457,8 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
static void e1000e_update_phy_task(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, update_phy_task);
+ struct e1000_adapter,
+ update_phy_task);
if (test_bit(__E1000_DOWN, &adapter->state))
return;
@@ -4454,7 +4475,7 @@ static void e1000e_update_phy_task(struct work_struct *work)
**/
static void e1000_update_phy_info(unsigned long data)
{
- struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
if (test_bit(__E1000_DOWN, &adapter->state))
return;
@@ -4621,18 +4642,16 @@ static void e1000e_update_stats(struct e1000_adapter *adapter)
* our own version based on RUC and ROC
*/
netdev->stats.rx_errors = adapter->stats.rxerrc +
- adapter->stats.crcerrs + adapter->stats.algnerrc +
- adapter->stats.ruc + adapter->stats.roc +
- adapter->stats.cexterr;
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr;
netdev->stats.rx_length_errors = adapter->stats.ruc +
- adapter->stats.roc;
+ adapter->stats.roc;
netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
netdev->stats.rx_missed_errors = adapter->stats.mpc;
/* Tx Errors */
- netdev->stats.tx_errors = adapter->stats.ecol +
- adapter->stats.latecol;
+ netdev->stats.tx_errors = adapter->stats.ecol + adapter->stats.latecol;
netdev->stats.tx_aborted_errors = adapter->stats.ecol;
netdev->stats.tx_window_errors = adapter->stats.latecol;
netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
@@ -4790,7 +4809,7 @@ static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter)
**/
static void e1000_watchdog(unsigned long data)
{
- struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
/* Do the rest outside of interrupt context */
schedule_work(&adapter->watchdog_task);
@@ -4801,7 +4820,8 @@ static void e1000_watchdog(unsigned long data)
static void e1000_watchdog_task(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, watchdog_task);
+ struct e1000_adapter,
+ watchdog_task);
struct net_device *netdev = adapter->netdev;
struct e1000_mac_info *mac = &adapter->hw.mac;
struct e1000_phy_info *phy = &adapter->hw.phy;
@@ -4835,8 +4855,8 @@ static void e1000_watchdog_task(struct work_struct *work)
/* update snapshot of PHY registers on LSC */
e1000_phy_read_status(adapter);
mac->ops.get_link_up_info(&adapter->hw,
- &adapter->link_speed,
- &adapter->link_duplex);
+ &adapter->link_speed,
+ &adapter->link_duplex);
e1000_print_link_info(adapter);
/* check if SmartSpeed worked */
@@ -4949,7 +4969,7 @@ static void e1000_watchdog_task(struct work_struct *work)
adapter->flags |= FLAG_RESTART_NOW;
else
pm_schedule_suspend(netdev->dev.parent,
- LINK_TIMEOUT);
+ LINK_TIMEOUT);
}
}
@@ -4984,8 +5004,8 @@ link_up:
*/
u32 goc = (adapter->gotc + adapter->gorc) / 10000;
u32 dif = (adapter->gotc > adapter->gorc ?
- adapter->gotc - adapter->gorc :
- adapter->gorc - adapter->gotc) / 10000;
+ adapter->gotc - adapter->gorc :
+ adapter->gorc - adapter->gotc) / 10000;
u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
e1000e_write_itr(adapter, itr);
@@ -5064,14 +5084,14 @@ static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb)
iph->tot_len = 0;
iph->check = 0;
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
- 0, IPPROTO_TCP, 0);
+ 0, IPPROTO_TCP, 0);
cmd_length = E1000_TXD_CMD_IP;
ipcse = skb_transport_offset(skb) - 1;
} else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr,
- 0, IPPROTO_TCP, 0);
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
ipcse = 0;
}
ipcss = skb_network_offset(skb);
@@ -5080,7 +5100,7 @@ static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb)
tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
- E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+ E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
i = tx_ring->next_to_use;
context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
@@ -5150,8 +5170,7 @@ static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb)
context_desc->lower_setup.ip_config = 0;
context_desc->upper_setup.tcp_fields.tucss = css;
- context_desc->upper_setup.tcp_fields.tucso =
- css + skb->csum_offset;
+ context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset;
context_desc->upper_setup.tcp_fields.tucse = 0;
context_desc->tcp_seg_setup.data = 0;
context_desc->cmd_and_length = cpu_to_le32(cmd_len);
@@ -5224,7 +5243,8 @@ static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb,
buffer_info->time_stamp = jiffies;
buffer_info->next_to_watch = i;
buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag,
- offset, size, DMA_TO_DEVICE);
+ offset, size,
+ DMA_TO_DEVICE);
buffer_info->mapped_as_page = true;
if (dma_mapping_error(&pdev->dev, buffer_info->dma))
goto dma_error;
@@ -5273,7 +5293,7 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count)
if (tx_flags & E1000_TX_FLAGS_TSO) {
txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
- E1000_TXD_CMD_TSE;
+ E1000_TXD_CMD_TSE;
txd_upper |= E1000_TXD_POPTS_TXSM << 8;
if (tx_flags & E1000_TX_FLAGS_IPV4)
@@ -5304,8 +5324,8 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count)
buffer_info = &tx_ring->buffer_info[i];
tx_desc = E1000_TX_DESC(*tx_ring, i);
tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
- tx_desc->lower.data =
- cpu_to_le32(txd_lower | buffer_info->length);
+ tx_desc->lower.data = cpu_to_le32(txd_lower |
+ buffer_info->length);
tx_desc->upper.data = cpu_to_le32(txd_upper);
i++;
@@ -5355,11 +5375,11 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
return 0;
- if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP))
+ if (((struct ethhdr *)skb->data)->h_proto != htons(ETH_P_IP))
return 0;
{
- const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14);
+ const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data + 14);
struct udphdr *udp;
if (ip->protocol != IPPROTO_UDP)
@@ -5584,7 +5604,7 @@ static void e1000_reset_task(struct work_struct *work)
* Returns the address of the device statistics structure.
**/
struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
- struct rtnl_link_stats64 *stats)
+ struct rtnl_link_stats64 *stats)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -5605,18 +5625,15 @@ struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
* our own version based on RUC and ROC
*/
stats->rx_errors = adapter->stats.rxerrc +
- adapter->stats.crcerrs + adapter->stats.algnerrc +
- adapter->stats.ruc + adapter->stats.roc +
- adapter->stats.cexterr;
- stats->rx_length_errors = adapter->stats.ruc +
- adapter->stats.roc;
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr;
+ stats->rx_length_errors = adapter->stats.ruc + adapter->stats.roc;
stats->rx_crc_errors = adapter->stats.crcerrs;
stats->rx_frame_errors = adapter->stats.algnerrc;
stats->rx_missed_errors = adapter->stats.mpc;
/* Tx Errors */
- stats->tx_errors = adapter->stats.ecol +
- adapter->stats.latecol;
+ stats->tx_errors = adapter->stats.ecol + adapter->stats.latecol;
stats->tx_aborted_errors = adapter->stats.ecol;
stats->tx_window_errors = adapter->stats.latecol;
stats->tx_carrier_errors = adapter->stats.tncrs;
@@ -5685,9 +5702,9 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
/* adjust allocation if LPE protects us, and we aren't using SBP */
if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
- (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
+ (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
- + ETH_FCS_LEN;
+ + ETH_FCS_LEN;
if (netif_running(netdev))
e1000e_up(adapter);
@@ -5866,7 +5883,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
phy_reg &= ~(BM_RCTL_MO_MASK);
if (mac_reg & E1000_RCTL_MO_3)
phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
- << BM_RCTL_MO_SHIFT);
+ << BM_RCTL_MO_SHIFT);
if (mac_reg & E1000_RCTL_BAM)
phy_reg |= BM_RCTL_BAM;
if (mac_reg & E1000_RCTL_PMCF)
@@ -5935,10 +5952,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
}
ctrl = er32(CTRL);
- /* advertise wake from D3Cold */
- #define E1000_CTRL_ADVD3WUC 0x00100000
- /* phy power management enable */
- #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
ctrl |= E1000_CTRL_ADVD3WUC;
if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
@@ -5982,8 +5995,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
*/
e1000e_release_hw_control(adapter);
- pci_clear_master(pdev);
-
/* The pci-e switch on some quad port adapters will report a
* correctable error when the MAC transitions from D0 to D3. To
* prevent this we need to mask off the correctable errors on the
@@ -6082,24 +6093,24 @@ static int __e1000_resume(struct pci_dev *pdev)
e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
if (phy_data) {
e_info("PHY Wakeup cause - %s\n",
- phy_data & E1000_WUS_EX ? "Unicast Packet" :
- phy_data & E1000_WUS_MC ? "Multicast Packet" :
- phy_data & E1000_WUS_BC ? "Broadcast Packet" :
- phy_data & E1000_WUS_MAG ? "Magic Packet" :
- phy_data & E1000_WUS_LNKC ?
- "Link Status Change" : "other");
+ phy_data & E1000_WUS_EX ? "Unicast Packet" :
+ phy_data & E1000_WUS_MC ? "Multicast Packet" :
+ phy_data & E1000_WUS_BC ? "Broadcast Packet" :
+ phy_data & E1000_WUS_MAG ? "Magic Packet" :
+ phy_data & E1000_WUS_LNKC ?
+ "Link Status Change" : "other");
}
e1e_wphy(&adapter->hw, BM_WUS, ~0);
} else {
u32 wus = er32(WUS);
if (wus) {
e_info("MAC Wakeup cause - %s\n",
- wus & E1000_WUS_EX ? "Unicast Packet" :
- wus & E1000_WUS_MC ? "Multicast Packet" :
- wus & E1000_WUS_BC ? "Broadcast Packet" :
- wus & E1000_WUS_MAG ? "Magic Packet" :
- wus & E1000_WUS_LNKC ? "Link Status Change" :
- "other");
+ wus & E1000_WUS_EX ? "Unicast Packet" :
+ wus & E1000_WUS_MC ? "Multicast Packet" :
+ wus & E1000_WUS_BC ? "Broadcast Packet" :
+ wus & E1000_WUS_MAG ? "Magic Packet" :
+ wus & E1000_WUS_LNKC ? "Link Status Change" :
+ "other");
}
ew32(WUS, ~0);
}
@@ -6374,7 +6385,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
e_info("(PCI Express:2.5GT/s:%s) %pM\n",
/* bus width */
((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
- "Width x1"),
+ "Width x1"),
/* MAC address */
netdev->dev_addr);
e_info("Intel(R) PRO/%s Network Connection\n",
@@ -6414,7 +6425,7 @@ static int e1000_set_features(struct net_device *netdev,
if (changed & (NETIF_F_TSO | NETIF_F_TSO6))
adapter->flags |= FLAG_TSO_FORCE;
- if (!(changed & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX |
+ if (!(changed & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_RXFCS |
NETIF_F_RXALL)))
return 0;
@@ -6484,7 +6495,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
resource_size_t flash_start, flash_len;
static int cards_found;
u16 aspm_disable_flag = 0;
- int i, err, pci_using_dac;
+ int bars, i, err, pci_using_dac;
u16 eeprom_data = 0;
u16 eeprom_apme_mask = E1000_EEPROM_APME;
@@ -6511,15 +6522,16 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
if (err) {
- dev_err(&pdev->dev, "No usable DMA configuration, aborting\n");
+ dev_err(&pdev->dev,
+ "No usable DMA configuration, aborting\n");
goto err_dma;
}
}
}
- err = pci_request_selected_regions_exclusive(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM),
- e1000e_driver_name);
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ err = pci_request_selected_regions_exclusive(pdev, bars,
+ e1000e_driver_name);
if (err)
goto err_pci_reg;
@@ -6572,6 +6584,10 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_flashmap;
}
+ /* Set default EEE advertisement */
+ if (adapter->flags2 & FLAG2_HAS_EEE)
+ adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T;
+
/* construct the net_device struct */
netdev->netdev_ops = &e1000e_netdev_ops;
e1000e_set_ethtool_ops(netdev);
@@ -6620,8 +6636,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Set initial default active device features */
netdev->features = (NETIF_F_SG |
- NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_CTAG_RX |
+ NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_TSO |
NETIF_F_TSO6 |
NETIF_F_RXHASH |
@@ -6635,7 +6651,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
netdev->hw_features |= NETIF_F_RXALL;
if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
- netdev->features |= NETIF_F_HW_VLAN_FILTER;
+ netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
netdev->vlan_features |= (NETIF_F_SG |
NETIF_F_TSO |
@@ -6688,11 +6704,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
init_timer(&adapter->watchdog_timer);
adapter->watchdog_timer.function = e1000_watchdog;
- adapter->watchdog_timer.data = (unsigned long) adapter;
+ adapter->watchdog_timer.data = (unsigned long)adapter;
init_timer(&adapter->phy_info_timer);
adapter->phy_info_timer.function = e1000_update_phy_info;
- adapter->phy_info_timer.data = (unsigned long) adapter;
+ adapter->phy_info_timer.data = (unsigned long)adapter;
INIT_WORK(&adapter->reset_task, e1000_reset_task);
INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
@@ -6800,7 +6816,7 @@ err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_select_bars(pdev, IORESOURCE_MEM));
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -6870,7 +6886,7 @@ static void e1000_remove(struct pci_dev *pdev)
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_select_bars(pdev, IORESOURCE_MEM));
free_netdev(netdev);
@@ -6891,7 +6907,8 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP),
+ board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
@@ -6967,8 +6984,8 @@ MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
#ifdef CONFIG_PM
static const struct dev_pm_ops e1000_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume)
- SET_RUNTIME_PM_OPS(e1000_runtime_suspend,
- e1000_runtime_resume, e1000_idle)
+ SET_RUNTIME_PM_OPS(e1000_runtime_suspend, e1000_runtime_resume,
+ e1000_idle)
};
#endif
diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c
index 84fecc2..44ddc0a 100644
--- a/drivers/net/ethernet/intel/e1000e/nvm.c
+++ b/drivers/net/ethernet/intel/e1000e/nvm.c
@@ -630,7 +630,7 @@ void e1000e_reload_nvm_generic(struct e1000_hw *hw)
{
u32 ctrl_ext;
- udelay(10);
+ usleep_range(10, 20);
ctrl_ext = er32(CTRL_EXT);
ctrl_ext |= E1000_CTRL_EXT_EE_RST;
ew32(CTRL_EXT, ctrl_ext);
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index 98da75d..c16bd75 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -45,7 +45,7 @@
unsigned int copybreak = COPYBREAK_DEFAULT;
module_param(copybreak, uint, 0644);
MODULE_PARM_DESC(copybreak,
- "Maximum size of packet that is copied to a new buffer on receive");
+ "Maximum size of packet that is copied to a new buffer on receive");
/* All parameters are treated the same, as an integer array of values.
* This macro just reduces the need to repeat the same declaration code
@@ -143,7 +143,8 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
*
* Default Value: 1 (enabled)
*/
-E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
+E1000_PARAM(WriteProtectNVM,
+ "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
/* Enable CRC Stripping
*
@@ -160,13 +161,18 @@ struct e1000_option {
const char *err;
int def;
union {
- struct { /* range_option info */
+ /* range_option info */
+ struct {
int min;
int max;
} r;
- struct { /* list_option info */
+ /* list_option info */
+ struct {
int nr;
- struct e1000_opt_list { int i; char *str; } *p;
+ struct e1000_opt_list {
+ int i;
+ char *str;
+ } *p;
} l;
} arg;
};
@@ -246,7 +252,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
"Using defaults for all values\n");
}
- { /* Transmit Interrupt Delay */
+ /* Transmit Interrupt Delay */
+ {
static const struct e1000_option opt = {
.type = range_option,
.name = "Transmit Interrupt Delay",
@@ -265,7 +272,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
adapter->tx_int_delay = opt.def;
}
}
- { /* Transmit Absolute Interrupt Delay */
+ /* Transmit Absolute Interrupt Delay */
+ {
static const struct e1000_option opt = {
.type = range_option,
.name = "Transmit Absolute Interrupt Delay",
@@ -284,7 +292,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
adapter->tx_abs_int_delay = opt.def;
}
}
- { /* Receive Interrupt Delay */
+ /* Receive Interrupt Delay */
+ {
static struct e1000_option opt = {
.type = range_option,
.name = "Receive Interrupt Delay",
@@ -303,7 +312,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
adapter->rx_int_delay = opt.def;
}
}
- { /* Receive Absolute Interrupt Delay */
+ /* Receive Absolute Interrupt Delay */
+ {
static const struct e1000_option opt = {
.type = range_option,
.name = "Receive Absolute Interrupt Delay",
@@ -322,7 +332,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
adapter->rx_abs_int_delay = opt.def;
}
}
- { /* Interrupt Throttling Rate */
+ /* Interrupt Throttling Rate */
+ {
static const struct e1000_option opt = {
.type = range_option,
.name = "Interrupt Throttling Rate (ints/sec)",
@@ -392,7 +403,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
break;
}
}
- { /* Interrupt Mode */
+ /* Interrupt Mode */
+ {
static struct e1000_option opt = {
.type = range_option,
.name = "Interrupt Mode",
@@ -435,7 +447,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
kfree(opt.err);
#endif
}
- { /* Smart Power Down */
+ /* Smart Power Down */
+ {
static const struct e1000_option opt = {
.type = enable_option,
.name = "PHY Smart Power Down",
@@ -450,7 +463,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
adapter->flags |= FLAG_SMART_POWER_DOWN;
}
}
- { /* CRC Stripping */
+ /* CRC Stripping */
+ {
static const struct e1000_option opt = {
.type = enable_option,
.name = "CRC Stripping",
@@ -470,27 +484,28 @@ void e1000e_check_options(struct e1000_adapter *adapter)
adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
}
}
- { /* Kumeran Lock Loss Workaround */
+ /* Kumeran Lock Loss Workaround */
+ {
static const struct e1000_option opt = {
.type = enable_option,
.name = "Kumeran Lock Loss Workaround",
.err = "defaulting to Enabled",
.def = OPTION_ENABLED
};
+ bool enabled = opt.def;
if (num_KumeranLockLoss > bd) {
unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
- if (hw->mac.type == e1000_ich8lan)
- e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
- kmrn_lock_loss);
- } else {
- if (hw->mac.type == e1000_ich8lan)
- e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
- opt.def);
+ enabled = kmrn_lock_loss;
}
+
+ if (hw->mac.type == e1000_ich8lan)
+ e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
+ enabled);
}
- { /* Write-protect NVM */
+ /* Write-protect NVM */
+ {
static const struct e1000_option opt = {
.type = enable_option,
.name = "Write-protect NVM",
@@ -500,7 +515,8 @@ void e1000e_check_options(struct e1000_adapter *adapter)
if (adapter->flags & FLAG_IS_ICH) {
if (num_WriteProtectNVM > bd) {
- unsigned int write_protect_nvm = WriteProtectNVM[bd];
+ unsigned int write_protect_nvm =
+ WriteProtectNVM[bd];
e1000_validate_option(&write_protect_nvm, &opt,
adapter);
if (write_protect_nvm)
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 0930c13..59c76a6 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -37,7 +37,9 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
/* Cable length tables */
static const u16 e1000_m88_cable_length_table[] = {
- 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED
+};
+
#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_m88_cable_length_table)
@@ -49,7 +51,9 @@ static const u16 e1000_igp_2_cable_length_table[] = {
66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
- 124};
+ 124
+};
+
#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_igp_2_cable_length_table)
@@ -67,8 +71,7 @@ s32 e1000e_check_reset_block_generic(struct e1000_hw *hw)
manc = er32(MANC);
- return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
- E1000_BLK_PHY_RESET : 0;
+ return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? E1000_BLK_PHY_RESET : 0;
}
/**
@@ -94,7 +97,7 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw)
return ret_val;
phy->id = (u32)(phy_id << 16);
- udelay(20);
+ usleep_range(20, 40);
ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id);
if (ret_val)
return ret_val;
@@ -175,7 +178,13 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
e_dbg("MDI Error\n");
return -E1000_ERR_PHY;
}
- *data = (u16) mdic;
+ if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
+ e_dbg("MDI Read offset error - requested %d, returned %d\n",
+ offset,
+ (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
+ return -E1000_ERR_PHY;
+ }
+ *data = (u16)mdic;
/* Allow some time after each MDIC transaction to avoid
* reading duplicate data in the next MDIC transaction.
@@ -233,6 +242,12 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
e_dbg("MDI Error\n");
return -E1000_ERR_PHY;
}
+ if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
+ e_dbg("MDI Write offset error - requested %d, returned %d\n",
+ offset,
+ (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
+ return -E1000_ERR_PHY;
+ }
/* Allow some time after each MDIC transaction to avoid
* reading duplicate data in the next MDIC transaction.
@@ -324,7 +339,7 @@ s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page)
* semaphores before exiting.
**/
static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
+ bool locked)
{
s32 ret_val = 0;
@@ -391,7 +406,7 @@ s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
* at the offset. Release any acquired semaphores before exiting.
**/
static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
+ bool locked)
{
s32 ret_val = 0;
@@ -410,8 +425,7 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
(u16)offset);
if (!ret_val)
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS &
- offset,
- data);
+ offset, data);
if (!locked)
hw->phy.ops.release(hw);
@@ -458,7 +472,7 @@ s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
* Release any acquired semaphores before exiting.
**/
static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
+ bool locked)
{
u32 kmrnctrlsta;
@@ -531,7 +545,7 @@ s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
* before exiting.
**/
static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
+ bool locked)
{
u32 kmrnctrlsta;
@@ -772,8 +786,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
phy_data |= M88E1000_EPSCR_TX_CLK_25;
- if ((phy->revision == 2) &&
- (phy->id == M88E1111_I_PHY_ID)) {
+ if ((phy->revision == 2) && (phy->id == M88E1111_I_PHY_ID)) {
/* 82573L PHY - set the downshift counter to 5x. */
phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
@@ -1296,7 +1309,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
- 100000, &link);
+ 100000, &link);
if (ret_val)
return ret_val;
@@ -1319,7 +1332,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
/* Try once more */
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
- 100000, &link);
+ 100000, &link);
if (ret_val)
return ret_val;
}
@@ -1609,9 +1622,9 @@ s32 e1000_check_polarity_m88(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &data);
if (!ret_val)
- phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ phy->cable_polarity = ((data & M88E1000_PSSR_REV_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal);
return ret_val;
}
@@ -1653,9 +1666,9 @@ s32 e1000_check_polarity_igp(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, offset, &data);
if (!ret_val)
- phy->cable_polarity = (data & mask)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ phy->cable_polarity = ((data & mask)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal);
return ret_val;
}
@@ -1685,9 +1698,9 @@ s32 e1000_check_polarity_ife(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, offset, &phy_data);
if (!ret_val)
- phy->cable_polarity = (phy_data & mask)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ phy->cable_polarity = ((phy_data & mask)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal);
return ret_val;
}
@@ -1733,7 +1746,7 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw)
* Polls the PHY status register for link, 'iterations' number of times.
**/
s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
- u32 usec_interval, bool *success)
+ u32 usec_interval, bool *success)
{
s32 ret_val = 0;
u16 i, phy_status;
@@ -1756,7 +1769,7 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
if (phy_status & BMSR_LSTATUS)
break;
if (usec_interval >= 1000)
- mdelay(usec_interval/1000);
+ mdelay(usec_interval / 1000);
else
udelay(usec_interval);
}
@@ -1791,8 +1804,8 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ index = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT);
if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1)
return -E1000_ERR_PHY;
@@ -1824,10 +1837,10 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
u16 cur_agc_index, max_agc_index = 0;
u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
- IGP02E1000_PHY_AGC_A,
- IGP02E1000_PHY_AGC_B,
- IGP02E1000_PHY_AGC_C,
- IGP02E1000_PHY_AGC_D
+ IGP02E1000_PHY_AGC_A,
+ IGP02E1000_PHY_AGC_B,
+ IGP02E1000_PHY_AGC_C,
+ IGP02E1000_PHY_AGC_D
};
/* Read the AGC registers for all channels */
@@ -1841,8 +1854,8 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
* that can be put into the lookup table to obtain the
* approximate cable length.
*/
- cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
- IGP02E1000_AGC_LENGTH_MASK;
+ cur_agc_index = ((phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+ IGP02E1000_AGC_LENGTH_MASK);
/* Array index bound check. */
if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
@@ -1865,8 +1878,8 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
/* Calculate cable length with the error range of +/- 10 meters. */
- phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
- (agc_value - IGP02E1000_AGC_RANGE) : 0;
+ phy->min_cable_length = (((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
+ (agc_value - IGP02E1000_AGC_RANGE) : 0);
phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
@@ -2040,9 +2053,9 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
return ret_val;
} else {
/* Polarity is forced */
- phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ phy->cable_polarity = ((data & IFE_PSC_FORCE_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal);
}
ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
@@ -2119,7 +2132,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
ew32(CTRL, ctrl);
e1e_flush();
- udelay(150);
+ usleep_range(150, 300);
phy->ops.release(hw);
@@ -2375,13 +2388,13 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
- (page << page_shift));
+ (page << page_shift));
if (ret_val)
goto release;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
release:
hw->phy.ops.release(hw);
@@ -2433,13 +2446,13 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
- (page << page_shift));
+ (page << page_shift));
if (ret_val)
goto release;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
release:
hw->phy.ops.release(hw);
return ret_val;
@@ -2674,7 +2687,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
if (read) {
/* Read the Wakeup register page value using opcode 0x12 */
ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
- data);
+ data);
} else {
/* Write the Wakeup register page value using opcode 0x12 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
@@ -2763,7 +2776,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
if (page > 0 && page < HV_INTC_FC_PAGE_START) {
ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
- data, true);
+ data, true);
goto out;
}
@@ -2786,8 +2799,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
e_dbg("reading PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
page << IGP_PAGE_SHIFT, reg);
- ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
- data);
+ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data);
out:
if (!locked)
hw->phy.ops.release(hw);
@@ -2871,7 +2883,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
if (page > 0 && page < HV_INTC_FC_PAGE_START) {
ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
- &data, false);
+ &data, false);
goto out;
}
@@ -2910,7 +2922,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
page << IGP_PAGE_SHIFT, reg);
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
- data);
+ data);
out:
if (!locked)
@@ -2988,15 +3000,15 @@ static u32 e1000_get_phy_addr_for_hv_page(u32 page)
* These accesses done with PHY address 2 and without using pages.
**/
static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
- u16 *data, bool read)
+ u16 *data, bool read)
{
s32 ret_val;
u32 addr_reg;
u32 data_reg;
/* This takes care of the difference with desktop vs mobile phy */
- addr_reg = (hw->phy.type == e1000_phy_82578) ?
- I82578_ADDR_REG : I82577_ADDR_REG;
+ addr_reg = ((hw->phy.type == e1000_phy_82578) ?
+ I82578_ADDR_REG : I82577_ADDR_REG);
data_reg = addr_reg + 1;
/* All operations in this function are phy address 2 */
@@ -3050,8 +3062,8 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- data &= BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_MASK;
+ data &= (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK);
if (data != (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
BM_CS_STATUS_SPEED_1000))
@@ -3086,9 +3098,9 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
if (!ret_val)
- phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ phy->cable_polarity = ((data & I82577_PHY_STATUS2_REV_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal);
return ret_val;
}
@@ -3215,8 +3227,8 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- length = (phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
- I82577_DSTATUS_CABLE_LENGTH_SHIFT;
+ length = ((phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
+ I82577_DSTATUS_CABLE_LENGTH_SHIFT);
if (length == E1000_CABLE_LENGTH_UNDEFINED)
return -E1000_ERR_PHY;
diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c
index b477fa5..065f8c8 100644
--- a/drivers/net/ethernet/intel/e1000e/ptp.c
+++ b/drivers/net/ethernet/intel/e1000e/ptp.c
@@ -145,8 +145,7 @@ static int e1000e_phc_settime(struct ptp_clock_info *ptp,
unsigned long flags;
u64 ns;
- ns = ts->tv_sec * NSEC_PER_SEC;
- ns += ts->tv_nsec;
+ ns = timespec_to_ns(ts);
/* reset the timecounter */
spin_lock_irqsave(&adapter->systim_lock, flags);
OpenPOWER on IntegriCloud