diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/e1000.h')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/e1000.h | 46 |
1 files changed, 45 insertions, 1 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index b89b181..dea9e55 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -41,6 +41,8 @@ #include <linux/pci-aspm.h> #include <linux/crc32.h> #include <linux/if_vlan.h> +#include <linux/clocksource.h> +#include <linux/net_tstamp.h> #include "hw.h" @@ -353,6 +355,7 @@ struct e1000_adapter { u64 gorc_old; u32 alloc_rx_buff_failed; u32 rx_dma_failed; + u32 rx_hwtstamp_cleared; unsigned int rx_ps_pages; u16 rx_ps_bsize0; @@ -402,6 +405,14 @@ struct e1000_adapter { u16 tx_ring_count; u16 rx_ring_count; + + struct hwtstamp_config hwtstamp_config; + struct delayed_work systim_overflow_work; + struct sk_buff *tx_hwtstamp_skb; + struct work_struct tx_hwtstamp_work; + spinlock_t systim_lock; /* protects SYSTIML/H regsters */ + struct cyclecounter cc; + struct timecounter tc; }; struct e1000_info { @@ -416,6 +427,38 @@ struct e1000_info { const struct e1000_nvm_operations *nvm_ops; }; +/* The system time is maintained by a 64-bit counter comprised of the 32-bit + * SYSTIMH and SYSTIML registers. How the counter increments (and therefore + * its resolution) is based on the contents of the TIMINCA register - it + * increments every incperiod (bits 31:24) clock ticks by incvalue (bits 23:0). + * For the best accuracy, the incperiod should be as small as possible. The + * incvalue is scaled by a factor as large as possible (while still fitting + * in bits 23:0) so that relatively small clock corrections can be made. + * + * As a result, a shift of INCVALUE_SHIFT_n is used to fit a value of + * INCVALUE_n into the TIMINCA register allowing 32+8+(24-INCVALUE_SHIFT_n) + * bits to count nanoseconds leaving the rest for fractional nonseconds. + */ +#define INCVALUE_96MHz 125 +#define INCVALUE_SHIFT_96MHz 17 +#define INCPERIOD_SHIFT_96MHz 2 +#define INCPERIOD_96MHz (12 >> INCPERIOD_SHIFT_96MHz) + +#define INCVALUE_25MHz 40 +#define INCVALUE_SHIFT_25MHz 18 +#define INCPERIOD_25MHz 1 + +/* Another drawback of scaling the incvalue by a large factor is the + * 64-bit SYSTIM register overflows more quickly. This is dealt with + * by simply reading the clock before it overflows. + * + * Clock ns bits Overflows after + * ~~~~~~ ~~~~~~~ ~~~~~~~~~~~~~~~ + * 96MHz 47-bit 2^(47-INCPERIOD_SHIFT_96MHz) / 10^9 / 3600 = 9.77 hrs + * 25MHz 46-bit 2^46 / 10^9 / 3600 = 19.55 hours + */ +#define E1000_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 60 * 4) + /* hardware capability, feature, and workaround flags */ #define FLAG_HAS_AMT (1 << 0) #define FLAG_HAS_FLASH (1 << 1) @@ -431,7 +474,7 @@ struct e1000_info { #define FLAG_HAS_SMART_POWER_DOWN (1 << 11) #define FLAG_IS_QUAD_PORT_A (1 << 12) #define FLAG_IS_QUAD_PORT (1 << 13) -/* reserved bit14 */ +#define FLAG_HAS_HW_TIMESTAMP (1 << 14) #define FLAG_APME_IN_WUC (1 << 15) #define FLAG_APME_IN_CTRL3 (1 << 16) #define FLAG_APME_CHECK_PORT_B (1 << 17) @@ -463,6 +506,7 @@ struct e1000_info { #define FLAG2_NO_DISABLE_RX (1 << 10) #define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11) #define FLAG2_DFLT_CRC_STRIPPING (1 << 12) +#define FLAG2_CHECK_RX_HWTSTAMP (1 << 13) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) |
