diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/82571.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/82571.c | 115 |
1 files changed, 38 insertions, 77 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index c985864..c77d010 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -26,8 +26,7 @@ *******************************************************************************/ -/* - * 82571EB Gigabit Ethernet Controller +/* 82571EB Gigabit Ethernet Controller * 82571EB Gigabit Ethernet Controller (Copper) * 82571EB Gigabit Ethernet Controller (Fiber) * 82571EB Dual Port Gigabit Mezzanine Adapter @@ -191,8 +190,7 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) if (((eecd >> 15) & 0x3) == 0x3) { nvm->type = e1000_nvm_flash_hw; nvm->word_size = 2048; - /* - * Autonomous Flash update bit must be cleared due + /* Autonomous Flash update bit must be cleared due * to Flash update issue. */ eecd &= ~E1000_EECD_AUPDEN; @@ -204,8 +202,7 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) nvm->type = e1000_nvm_eeprom_spi; size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> E1000_EECD_SIZE_EX_SHIFT); - /* - * Added to a constant, "size" becomes the left-shift value + /* Added to a constant, "size" becomes the left-shift value * for setting word_size. */ size += NVM_WORD_SIZE_BASE_SHIFT; @@ -291,8 +288,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_hw *hw) /* FWSM register */ mac->has_fwsm = true; - /* - * ARC supported; valid only if manageability features are + /* ARC supported; valid only if manageability features are * enabled. */ mac->arc_subsystem_valid = !!(er32(FWSM) & @@ -314,8 +310,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_hw *hw) break; } - /* - * Ensure that the inter-port SWSM.SMBI lock bit is clear before + /* Ensure that the inter-port SWSM.SMBI lock bit is clear before * first NVM or PHY access. This should be done for single-port * devices, and for one port only on dual-port devices so that * for those devices we can still use the SMBI lock to synchronize @@ -352,11 +347,8 @@ static s32 e1000_init_mac_params_82571(struct e1000_hw *hw) ew32(SWSM, swsm & ~E1000_SWSM_SMBI); } - /* - * Initialize device specific counter of SMBI acquisition - * timeouts. - */ - hw->dev_spec.e82571.smb_counter = 0; + /* Initialize device specific counter of SMBI acquisition timeouts. */ + hw->dev_spec.e82571.smb_counter = 0; return 0; } @@ -445,8 +437,7 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82571: case e1000_82572: - /* - * The 82571 firmware may still be configuring the PHY. + /* The 82571 firmware may still be configuring the PHY. * In this case, we cannot access the PHY until the * configuration is done. So we explicitly set the * PHY ID. @@ -492,8 +483,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) s32 fw_timeout = hw->nvm.word_size + 1; s32 i = 0; - /* - * If we have timedout 3 times on trying to acquire + /* If we have timedout 3 times on trying to acquire * the inter-port SMBI semaphore, there is old code * operating on the other port, and it is not * releasing SMBI. Modify the number of times that @@ -787,8 +777,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * If our nvm is an EEPROM, then we're done + /* If our nvm is an EEPROM, then we're done * otherwise, commit the checksum to the flash NVM. */ if (hw->nvm.type != e1000_nvm_flash_hw) @@ -806,8 +795,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) /* Reset the firmware if using STM opcode. */ if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) { - /* - * The enabling of and the actual reset must be done + /* The enabling of and the actual reset must be done * in two write cycles. */ ew32(HICR, E1000_HICR_FW_RESET_ENABLE); @@ -867,8 +855,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u32 i, eewr = 0; s32 ret_val = 0; - /* - * A check for invalid values: offset too large, too many words, + /* A check for invalid values: offset too large, too many words, * and not enough words. */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || @@ -957,8 +944,7 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) } else { data &= ~IGP02E1000_PM_D0_LPLU; ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable * SmartSpeed, so performance is maintained. @@ -1002,8 +988,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) u32 ctrl, ctrl_ext, eecd, tctl; s32 ret_val; - /* - * Prevent the PCI-E bus from sticking if there is no TLP connection + /* Prevent the PCI-E bus from sticking if there is no TLP connection * on the last TLP read/write transaction when MAC is reset. */ ret_val = e1000e_disable_pcie_master(hw); @@ -1021,8 +1006,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) usleep_range(10000, 20000); - /* - * Must acquire the MDIO ownership before MAC reset. + /* Must acquire the MDIO ownership before MAC reset. * Ownership defaults to firmware after a reset. */ switch (hw->mac.type) { @@ -1067,8 +1051,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) /* We don't want to continue accessing MAC registers. */ return ret_val; - /* - * Phy configuration from NVM just starts after EECD_AUTO_RD is set. + /* Phy configuration from NVM just starts after EECD_AUTO_RD is set. * Need to wait for Phy configuration completion before accessing * NVM and Phy. */ @@ -1076,8 +1059,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82571: case e1000_82572: - /* - * REQ and GNT bits need to be cleared when using AUTO_RD + /* REQ and GNT bits need to be cleared when using AUTO_RD * to access the EEPROM. */ eecd = er32(EECD); @@ -1138,8 +1120,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) e_dbg("Initializing the IEEE VLAN\n"); mac->ops.clear_vfta(hw); - /* Setup the receive address. */ - /* + /* Setup the receive address. * If, however, a locally administered address was assigned to the * 82571, we must reserve a RAR for it to work around an issue where * resetting one port will reload the MAC on the other port. @@ -1183,8 +1164,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) break; } - /* - * Clear all of the statistics registers (clear on read). It is + /* Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there * is no link. @@ -1281,8 +1261,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) ew32(PBA_ECC, reg); } - /* - * Workaround for hardware errata. + /* Workaround for hardware errata. * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572 */ if ((hw->mac.type == e1000_82571) || (hw->mac.type == e1000_82572)) { @@ -1291,8 +1270,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) ew32(CTRL_EXT, reg); } - /* - * Disable IPv6 extension header parsing because some malformed + /* Disable IPv6 extension header parsing because some malformed * IPv6 headers can hang the Rx. */ if (hw->mac.type <= e1000_82573) { @@ -1309,8 +1287,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) reg |= (1 << 22); ew32(GCR, reg); - /* - * Workaround for hardware errata. + /* Workaround for hardware errata. * apply workaround for hardware errata documented in errata * docs Fixes issue where some error prone or unreliable PCIe * completions are occurring, particularly with ASPM enabled. @@ -1344,8 +1321,7 @@ static void e1000_clear_vfta_82571(struct e1000_hw *hw) case e1000_82574: case e1000_82583: if (hw->mng_cookie.vlan_id != 0) { - /* - * The VFTA is a 4096b bit-field, each identifying + /* The VFTA is a 4096b bit-field, each identifying * a single VLAN ID. The following operations * determine which 32b entry (i.e. offset) into the * array we want to set the VLAN ID (i.e. bit) of @@ -1362,8 +1338,7 @@ static void e1000_clear_vfta_82571(struct e1000_hw *hw) break; } for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { - /* - * If the offset we want to clear is the same offset of the + /* If the offset we want to clear is the same offset of the * manageability VLAN ID, then clear all bits except that of * the manageability unit. */ @@ -1401,8 +1376,7 @@ static s32 e1000_led_on_82574(struct e1000_hw *hw) ctrl = hw->mac.ledctl_mode2; if (!(E1000_STATUS_LU & er32(STATUS))) { - /* - * If no link, then turn LED on by setting the invert bit + /* If no link, then turn LED on by setting the invert bit * for each LED that's "on" (0x0E) in ledctl_mode2. */ for (i = 0; i < 4; i++) @@ -1427,8 +1401,7 @@ bool e1000_check_phy_82574(struct e1000_hw *hw) u16 receive_errors = 0; s32 ret_val = 0; - /* - * Read PHY Receive Error counter first, if its is max - all F's then + /* Read PHY Receive Error counter first, if its is max - all F's then * read the Base1000T status register If both are max then PHY is hung. */ ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors); @@ -1458,8 +1431,7 @@ bool e1000_check_phy_82574(struct e1000_hw *hw) **/ static s32 e1000_setup_link_82571(struct e1000_hw *hw) { - /* - * 82573 does not have a word in the NVM to determine + /* 82573 does not have a word in the NVM to determine * the default flow control setting, so we explicitly * set it to full. */ @@ -1526,8 +1498,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82571: case e1000_82572: - /* - * If SerDes loopback mode is entered, there is no form + /* If SerDes loopback mode is entered, there is no form * of reset to take the adapter out of that mode. So we * have to explicitly take the adapter out of loopback * mode. This prevents drivers from twiddling their thumbs @@ -1584,8 +1555,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) switch (mac->serdes_link_state) { case e1000_serdes_link_autoneg_complete: if (!(status & E1000_STATUS_LU)) { - /* - * We have lost link, retry autoneg before + /* We have lost link, retry autoneg before * reporting link failure */ mac->serdes_link_state = @@ -1598,8 +1568,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) break; case e1000_serdes_link_forced_up: - /* - * If we are receiving /C/ ordered sets, re-enable + /* If we are receiving /C/ ordered sets, re-enable * auto-negotiation in the TXCW register and disable * forced link in the Device Control register in an * attempt to auto-negotiate with our link partner. @@ -1619,8 +1588,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) case e1000_serdes_link_autoneg_progress: if (rxcw & E1000_RXCW_C) { - /* - * We received /C/ ordered sets, meaning the + /* We received /C/ ordered sets, meaning the * link partner has autonegotiated, and we can * trust the Link Up (LU) status bit. */ @@ -1636,8 +1604,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) e_dbg("AN_PROG -> DOWN\n"); } } else { - /* - * The link partner did not autoneg. + /* The link partner did not autoneg. * Force link up and full duplex, and change * state to forced. */ @@ -1660,8 +1627,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) case e1000_serdes_link_down: default: - /* - * The link was down but the receiver has now gained + /* The link was down but the receiver has now gained * valid sync, so lets see if we can bring the link * up. */ @@ -1679,8 +1645,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) mac->serdes_link_state = e1000_serdes_link_down; e_dbg("ANYSTATE -> DOWN\n"); } else { - /* - * Check several times, if SYNCH bit and CONFIG + /* Check several times, if SYNCH bit and CONFIG * bit both are consistently 1 then simply ignore * the IV bit and restart Autoneg */ @@ -1780,8 +1745,7 @@ void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) /* If workaround is activated... */ if (state) - /* - * Hold a copy of the LAA in RAR[14] This is done so that + /* Hold a copy of the LAA in RAR[14] This is done so that * between the time RAR[0] gets clobbered and the time it * gets fixed, the actual LAA is in one of the RARs and no * incoming packets directed to this port are dropped. @@ -1810,8 +1774,7 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) if (nvm->type != e1000_nvm_flash_hw) return 0; - /* - * Check bit 4 of word 10h. If it is 0, firmware is done updating + /* Check bit 4 of word 10h. If it is 0, firmware is done updating * 10h-12h. Checksum may need to be fixed. */ ret_val = e1000_read_nvm(hw, 0x10, 1, &data); @@ -1819,8 +1782,7 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) return ret_val; if (!(data & 0x10)) { - /* - * Read 0x23 and check bit 15. This bit is a 1 + /* Read 0x23 and check bit 15. This bit is a 1 * when the checksum has already been fixed. If * the checksum is still wrong and this bit is a * 1, we need to return bad checksum. Otherwise, @@ -1852,8 +1814,7 @@ static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw) if (hw->mac.type == e1000_82571) { s32 ret_val = 0; - /* - * If there's an alternate MAC address place it in RAR0 + /* If there's an alternate MAC address place it in RAR0 * so that it will override the Si installed default perm * address. */ |
