diff options
Diffstat (limited to 'drivers/net/ethernet/freescale')
| -rw-r--r-- | drivers/net/ethernet/freescale/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/fsl_pq_mdio.c | 549 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/fsl_pq_mdio.h | 52 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/gianfar.c | 12 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/gianfar.h | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/gianfar_ptp.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/ucc_geth.c | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/xgmac_mdio.c | 274 |
9 files changed, 595 insertions, 314 deletions
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig index 3574e14..feff516 100644 --- a/drivers/net/ethernet/freescale/Kconfig +++ b/drivers/net/ethernet/freescale/Kconfig @@ -62,6 +62,13 @@ config FSL_PQ_MDIO ---help--- This driver supports the MDIO bus used by the gianfar and UCC drivers. +config FSL_XGMAC_MDIO + tristate "Freescale XGMAC MDIO" + depends on FSL_SOC + select PHYLIB + ---help--- + This driver supports the MDIO bus on the Fman 10G Ethernet MACs. + config UCC_GETH tristate "Freescale QE Gigabit Ethernet" depends on QUICC_ENGINE diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile index 1752488..3d1839a 100644 --- a/drivers/net/ethernet/freescale/Makefile +++ b/drivers/net/ethernet/freescale/Makefile @@ -9,6 +9,7 @@ ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y) endif obj-$(CONFIG_FS_ENET) += fs_enet/ obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o +obj-$(CONFIG_FSL_XGMAC_MDIO) += xgmac_mdio.o obj-$(CONFIG_GIANFAR) += gianfar_driver.o obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o gianfar_driver-objs := gianfar.o \ diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c index 9527b28..c93a056 100644 --- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c +++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c @@ -19,54 +19,90 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/errno.h> -#include <linux/unistd.h> #include <linux/slab.h> -#include <linux/interrupt.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/spinlock.h> -#include <linux/mm.h> #include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/crc32.h> #include <linux/mii.h> -#include <linux/phy.h> -#include <linux/of.h> #include <linux/of_address.h> #include <linux/of_mdio.h> -#include <linux/of_platform.h> +#include <linux/of_device.h> #include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/ucc.h> +#include <asm/ucc.h> /* for ucc_set_qe_mux_mii_mng() */ #include "gianfar.h" -#include "fsl_pq_mdio.h" + +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 +#define MIIMCFG_INIT_VALUE 0x00000007 +#define MIIMCFG_RESET 0x80000000 + +#define MII_READ_COMMAND 0x00000001 + +struct fsl_pq_mii { + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ +}; + +struct fsl_pq_mdio { + u8 res1[16]; + u32 ieventm; /* MDIO Interrupt event register (for etsec2)*/ + u32 imaskm; /* MDIO Interrupt mask register (for etsec2)*/ + u8 res2[4]; + u32 emapm; /* MDIO Event mapping register (for etsec2)*/ + u8 res3[1280]; + struct fsl_pq_mii mii; + u8 res4[28]; + u32 utbipar; /* TBI phy address reg (only on UCC) */ + u8 res5[2728]; +} __packed; /* Number of microseconds to wait for an MII register to respond */ #define MII_TIMEOUT 1000 struct fsl_pq_mdio_priv { void __iomem *map; - struct fsl_pq_mdio __iomem *regs; + struct fsl_pq_mii __iomem *regs; + int irqs[PHY_MAX_ADDR]; +}; + +/* + * Per-device-type data. Each type of device tree node that we support gets + * one of these. + * + * @mii_offset: the offset of the MII registers within the memory map of the + * node. Some nodes define only the MII registers, and some define the whole + * MAC (which includes the MII registers). + * + * @get_tbipa: determines the address of the TBIPA register + * + * @ucc_configure: a special function for extra QE configuration + */ +struct fsl_pq_mdio_data { + unsigned int mii_offset; /* offset of the MII registers */ + uint32_t __iomem * (*get_tbipa)(void __iomem *p); + void (*ucc_configure)(phys_addr_t start, phys_addr_t end); }; /* - * Write value to the PHY at mii_id at register regnum, - * on the bus attached to the local interface, which may be different from the - * generic mdio bus (tied to a single interface), waiting until the write is - * done before returning. This is helpful in programming interfaces like - * the TBI which control interfaces like onchip SERDES and are always tied to - * the local mdio pins, which may not be the same as system mdio bus, used for + * Write value to the PHY at mii_id at register regnum, on the bus attached + * to the local interface, which may be different from the generic mdio bus + * (tied to a single interface), waiting until the write is done before + * returning. This is helpful in programming interfaces like the TBI which + * control interfaces like onchip SERDES and are always tied to the local + * mdio pins, which may not be the same as system mdio bus, used for * controlling the external PHYs, for example. */ -int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id, - int regnum, u16 value) +static int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, + u16 value) { + struct fsl_pq_mdio_priv *priv = bus->priv; + struct fsl_pq_mii __iomem *regs = priv->regs; u32 status; /* Set the PHY address and the register address we want to write */ @@ -83,20 +119,21 @@ int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id, } /* - * Read the bus for PHY at addr mii_id, register regnum, and - * return the value. Clears miimcom first. All PHY operation - * done on the bus attached to the local interface, - * which may be different from the generic mdio bus - * This is helpful in programming interfaces like - * the TBI which, in turn, control interfaces like onchip SERDES - * and are always tied to the local mdio pins, which may not be the + * Read the bus for PHY at addr mii_id, register regnum, and return the value. + * Clears miimcom first. + * + * All PHY operation done on the bus attached to the local interface, which + * may be different from the generic mdio bus. This is helpful in programming + * interfaces like the TBI which, in turn, control interfaces like on-chip + * SERDES and are always tied to the local mdio pins, which may not be the * same as system mdio bus, used for controlling the external PHYs, for eg. */ -int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs, - int mii_id, int regnum) +static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum) { - u16 value; + struct fsl_pq_mdio_priv *priv = bus->priv; + struct fsl_pq_mii __iomem *regs = priv->regs; u32 status; + u16 value; /* Set the PHY address and the register address we want to read */ out_be32(®s->miimadd, (mii_id << 8) | regnum); @@ -115,44 +152,15 @@ int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs, /* Grab the value of the register from miimstat */ value = in_be32(®s->miimstat); + dev_dbg(&bus->dev, "read %04x from address %x/%x\n", value, mii_id, regnum); return value; } -static struct fsl_pq_mdio __iomem *fsl_pq_mdio_get_regs(struct mii_bus *bus) -{ - struct fsl_pq_mdio_priv *priv = bus->priv; - - return priv->regs; -} - -/* - * Write value to the PHY at mii_id at register regnum, - * on the bus, waiting until the write is done before returning. - */ -int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) -{ - struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus); - - /* Write to the local MII regs */ - return fsl_pq_local_mdio_write(regs, mii_id, regnum, value); -} - -/* - * Read the bus for PHY at addr mii_id, register regnum, and - * return the value. Clears miimcom first. - */ -int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum) -{ - struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus); - - /* Read the local MII regs */ - return fsl_pq_local_mdio_read(regs, mii_id, regnum); -} - /* Reset the MIIM registers, and wait for the bus to free */ static int fsl_pq_mdio_reset(struct mii_bus *bus) { - struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus); + struct fsl_pq_mdio_priv *priv = bus->priv; + struct fsl_pq_mii __iomem *regs = priv->regs; u32 status; mutex_lock(&bus->mdio_lock); @@ -170,234 +178,291 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus) mutex_unlock(&bus->mdio_lock); if (!status) { - printk(KERN_ERR "%s: The MII Bus is stuck!\n", - bus->name); + dev_err(&bus->dev, "timeout waiting for MII bus\n"); return -EBUSY; } return 0; } -void fsl_pq_mdio_bus_name(char *name, struct device_node *np) +#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) +/* + * This is mildly evil, but so is our hardware for doing this. + * Also, we have to cast back to struct gfar because of + * definition weirdness done in gianfar.h. + */ +static uint32_t __iomem *get_gfar_tbipa(void __iomem *p) { - const u32 *addr; - u64 taddr = OF_BAD_ADDR; - - addr = of_get_address(np, 0, NULL, NULL); - if (addr) - taddr = of_translate_address(np, addr); + struct gfar __iomem *enet_regs = p; - snprintf(name, MII_BUS_ID_SIZE, "%s@%llx", np->name, - (unsigned long long)taddr); + return &enet_regs->tbipa; } -EXPORT_SYMBOL_GPL(fsl_pq_mdio_bus_name); +/* + * Return the TBIPAR address for an eTSEC2 node + */ +static uint32_t __iomem *get_etsec_tbipa(void __iomem *p) +{ + return p; +} +#endif -static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np) +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) +/* + * Return the TBIPAR address for a QE MDIO node + */ +static uint32_t __iomem *get_ucc_tbipa(void __iomem *p) { -#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) - struct gfar __iomem *enet_regs; + struct fsl_pq_mdio __iomem *mdio = p; - /* - * This is mildly evil, but so is our hardware for doing this. - * Also, we have to cast back to struct gfar because of - * definition weirdness done in gianfar.h. - */ - if(of_device_is_compatible(np, "fsl,gianfar-mdio") || - of_device_is_compatible(np, "fsl,gianfar-tbi") || - of_device_is_compatible(np, "gianfar")) { - enet_regs = (struct gfar __iomem *)regs; - return &enet_regs->tbipa; - } else if (of_device_is_compatible(np, "fsl,etsec2-mdio") || - of_device_is_compatible(np, "fsl,etsec2-tbi")) { - return of_iomap(np, 1); - } -#endif - return NULL; + return &mdio->utbipar; } - -static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id) +/* + * Find the UCC node that controls the given MDIO node + * + * For some reason, the QE MDIO nodes are not children of the UCC devices + * that control them. Therefore, we need to scan all UCC nodes looking for + * the one that encompases the given MDIO node. We do this by comparing + * physical addresses. The 'start' and 'end' addresses of the MDIO node are + * passed, and the correct UCC node will cover the entire address range. + * + * This assumes that there is only one QE MDIO node in the entire device tree. + */ +static void ucc_configure(phys_addr_t start, phys_addr_t end) { -#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) + static bool found_mii_master; struct device_node *np = NULL; - int err = 0; - for_each_compatible_node(np, NULL, "ucc_geth") { - struct resource tempres; + if (found_mii_master) + return; - err = of_address_to_resource(np, 0, &tempres); - if (err) + for_each_compatible_node(np, NULL, "ucc_geth") { + struct resource res; + const uint32_t *iprop; + uint32_t id; + int ret; + + ret = of_address_to_resource(np, 0, &res); + if (ret < 0) { + pr_debug("fsl-pq-mdio: no address range in node %s\n", + np->full_name); continue; + } /* if our mdio regs fall within this UCC regs range */ - if ((start >= tempres.start) && (end <= tempres.end)) { - /* Find the id of the UCC */ - const u32 *id; - - id = of_get_property(np, "cell-index", NULL); - if (!id) { - id = of_get_property(np, "device-id", NULL); - if (!id) - continue; + if ((start < res.start) || (end > res.end)) + continue; + + iprop = of_get_property(np, "cell-index", NULL); + if (!iprop) { + iprop = of_get_property(np, "device-id", NULL); + if (!iprop) { + pr_debug("fsl-pq-mdio: no UCC ID in node %s\n", + np->full_name); + continue; } + } - *ucc_id = *id; + id = be32_to_cpup(iprop); - return 0; + /* + * cell-index and device-id for QE nodes are + * numbered from 1, not 0. + */ + if (ucc_set_qe_mux_mii_mng(id - 1) < 0) { + pr_debug("fsl-pq-mdio: invalid UCC ID in node %s\n", + np->full_name); + continue; } + + pr_debug("fsl-pq-mdio: setting node UCC%u to MII master\n", id); + found_mii_master = true; } +} - if (err) - return err; - else - return -EINVAL; -#else - return -ENODEV; #endif -} -static int fsl_pq_mdio_probe(struct platform_device *ofdev) +static struct of_device_id fsl_pq_mdio_match[] = { +#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) + { + .compatible = "fsl,gianfar-tbi", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = 0, + .get_tbipa = get_gfar_tbipa, + }, + }, + { + .compatible = "fsl,gianfar-mdio", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = 0, + .get_tbipa = get_gfar_tbipa, + }, + }, + { + .type = "mdio", + .compatible = "gianfar", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = offsetof(struct fsl_pq_mdio, mii), + .get_tbipa = get_gfar_tbipa, + }, + }, + { + .compatible = "fsl,etsec2-tbi", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = offsetof(struct fsl_pq_mdio, mii), + .get_tbipa = get_etsec_tbipa, + }, + }, + { + .compatible = "fsl,etsec2-mdio", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = offsetof(struct fsl_pq_mdio, mii), + .get_tbipa = get_etsec_tbipa, + }, + }, +#endif +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) + { + .compatible = "fsl,ucc-mdio", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = 0, + .get_tbipa = get_ucc_tbipa, + .ucc_configure = ucc_configure, + }, + }, + { + /* Legacy UCC MDIO node */ + .type = "mdio", + .compatible = "ucc_geth_phy", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = 0, + .get_tbipa = get_ucc_tbipa, + .ucc_configure = ucc_configure, + }, + }, +#endif + /* No Kconfig option for Fman support yet */ + { + .compatible = "fsl,fman-mdio", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = 0, + /* Fman TBI operations are handled elsewhere */ + }, + }, + + {}, +}; +MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match); + +static int fsl_pq_mdio_probe(struct platform_device *pdev) { - struct device_node *np = ofdev->dev.of_node; + const struct of_device_id *id = + of_match_device(fsl_pq_mdio_match, &pdev->dev); + const struct fsl_pq_mdio_data *data = id->data; + struct device_node *np = pdev->dev.of_node; + struct resource res; struct device_node *tbi; struct fsl_pq_mdio_priv *priv; - struct fsl_pq_mdio __iomem *regs = NULL; - void __iomem *map; - u32 __iomem *tbipa; struct mii_bus *new_bus; - int tbiaddr = -1; - const u32 *addrp; - u64 addr = 0, size = 0; int err; - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; + dev_dbg(&pdev->dev, "found %s compatible node\n", id->compatible); - new_bus = mdiobus_alloc(); - if (!new_bus) { - err = -ENOMEM; - goto err_free_priv; - } + new_bus = mdiobus_alloc_size(sizeof(*priv)); + if (!new_bus) + return -ENOMEM; + priv = new_bus->priv; new_bus->name = "Freescale PowerQUICC MII Bus", - new_bus->read = &fsl_pq_mdio_read, - new_bus->write = &fsl_pq_mdio_write, - new_bus->reset = &fsl_pq_mdio_reset, - new_bus->priv = priv; - fsl_pq_mdio_bus_name(new_bus->id, np); - - addrp = of_get_address(np, 0, &size, NULL); - if (!addrp) { - err = -EINVAL; - goto err_free_bus; + new_bus->read = &fsl_pq_mdio_read; + new_bus->write = &fsl_pq_mdio_write; + new_bus->reset = &fsl_pq_mdio_reset; + new_bus->irq = priv->irqs; + + err = of_address_to_resource(np, 0, &res); + if (err < 0) { + dev_err(&pdev->dev, "could not obtain address information\n"); + goto error; } - /* Set the PHY base address */ - addr = of_translate_address(np, addrp); - if (addr == OF_BAD_ADDR) { - err = -EINVAL; - goto err_free_bus; - } + snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s@%llx", np->name, + (unsigned long long)res.start); - map = ioremap(addr, size); - if (!map) { + priv->map = of_iomap(np, 0); + if (!priv->map) { err = -ENOMEM; - goto err_free_bus; + goto error; } - priv->map = map; - - if (of_device_is_compatible(np, "fsl,gianfar-mdio") || - of_device_is_compatible(np, "fsl,gianfar-tbi") || - of_device_is_compatible(np, "fsl,ucc-mdio") || - of_device_is_compatible(np, "ucc_geth_phy")) - map -= offsetof(struct fsl_pq_mdio, miimcfg); - regs = map; - priv->regs = regs; - - new_bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); - if (NULL == new_bus->irq) { - err = -ENOMEM; - goto err_unmap_regs; + /* + * Some device tree nodes represent only the MII registers, and + * others represent the MAC and MII registers. The 'mii_offset' field + * contains the offset of the MII registers inside the mapped register + * space. + */ + if (data->mii_offset > resource_size(&res)) { + dev_err(&pdev->dev, "invalid register map\n"); + err = -EINVAL; + goto error; } + priv->regs = priv->map + data->mii_offset; - new_bus->parent = &ofdev->dev; - dev_set_drvdata(&ofdev->dev, new_bus); - - if (of_device_is_compatible(np, "fsl,gianfar-mdio") || - of_device_is_compatible(np, "fsl,gianfar-tbi") || - of_device_is_compatible(np, "fsl,etsec2-mdio") || - of_device_is_compatible(np, "fsl,etsec2-tbi") || - of_device_is_compatible(np, "gianfar")) { - tbipa = get_gfar_tbipa(regs, np); - if (!tbipa) { - err = -EINVAL; - goto err_free_irqs; - } - } else if (of_device_is_compatible(np, "fsl,ucc-mdio") || - of_device_is_compatible(np, "ucc_geth_phy")) { - u32 id; - static u32 mii_mng_master; - - tbipa = ®s->utbipar; - - if ((err = get_ucc_id_for_range(addr, addr + size, &id))) - goto err_free_irqs; + new_bus->parent = &pdev->dev; + dev_set_drvdata(&pdev->dev, new_bus); - if (!mii_mng_master) { - mii_mng_master = id; - ucc_set_qe_mux_mii_mng(id - 1); + if (data->get_tbipa) { + for_each_child_of_node(np, tbi) { + if (strcmp(tbi->type, "tbi-phy") == 0) { + dev_dbg(&pdev->dev, "found TBI PHY node %s\n", + strrchr(tbi->full_name, '/') + 1); + break; + } } - } else { - err = -ENODEV; - goto err_free_irqs; - } - for_each_child_of_node(np, tbi) { - if (!strncmp(tbi->type, "tbi-phy", 8)) - break; - } + if (tbi) { + const u32 *prop = of_get_property(tbi, "reg", NULL); + uint32_t __iomem *tbipa; - if (tbi) { - const u32 *prop = of_get_property(tbi, "reg", NULL); + if (!prop) { + dev_err(&pdev->dev, + "missing 'reg' property in node %s\n", + tbi->full_name); + err = -EBUSY; + goto error; + } - if (prop) - tbiaddr = *prop; + tbipa = data->get_tbipa(priv->map); - if (tbiaddr == -1) { - err = -EBUSY; - goto err_free_irqs; - } else { - out_be32(tbipa, tbiaddr); + out_be32(tbipa, be32_to_cpup(prop)); } } + if (data->ucc_configure) + data->ucc_configure(res.start, res.end); + err = of_mdiobus_register(new_bus, np); if (err) { - printk (KERN_ERR "%s: Cannot register as MDIO bus\n", - new_bus->name); - goto err_free_irqs; + dev_err(&pdev->dev, "cannot register %s as MDIO bus\n", + new_bus->name); + goto error; } return 0; -err_free_irqs: - kfree(new_bus->irq); -err_unmap_regs: - iounmap(priv->map); -err_free_bus: +error: + if (priv->map) + iounmap(priv->map); + kfree(new_bus); -err_free_priv: - kfree(priv); + return err; } -static int fsl_pq_mdio_remove(struct platform_device *ofdev) +static int fsl_pq_mdio_remove(struct platform_device *pdev) { - struct device *device = &ofdev->dev; + struct device *device = &pdev->dev; struct mii_bus *bus = dev_get_drvdata(device); struct fsl_pq_mdio_priv *priv = bus->priv; @@ -406,41 +471,11 @@ static int fsl_pq_mdio_remove(struct platform_device *ofdev) dev_set_drvdata(device, NULL); iounmap(priv->map); - bus->priv = NULL; mdiobus_free(bus); - kfree(priv); return 0; } -static struct of_device_id fsl_pq_mdio_match[] = { - { - .type = "mdio", - .compatible = "ucc_geth_phy", - }, - { - .type = "mdio", - .compatible = "gianfar", - }, - { - .compatible = "fsl,ucc-mdio", - }, - { - .compatible = "fsl,gianfar-tbi", - }, - { - .compatible = "fsl,gianfar-mdio", - }, - { - .compatible = "fsl,etsec2-tbi", - }, - { - .compatible = "fsl,etsec2-mdio", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match); - static struct platform_driver fsl_pq_mdio_driver = { .driver = { .name = "fsl-pq_mdio", diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.h b/drivers/net/ethernet/freescale/fsl_pq_mdio.h deleted file mode 100644 index bd17a2a..0000000 --- a/drivers/net/ethernet/freescale/fsl_pq_mdio.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Freescale PowerQUICC MDIO Driver -- MII Management Bus Implementation - * Driver for the MDIO bus controller on Freescale PowerQUICC processors - * - * Author: Andy Fleming - * Modifier: Sandeep Gopalpet - * - * Copyright 2002-2004, 2008-2009 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#ifndef __FSL_PQ_MDIO_H -#define __FSL_PQ_MDIO_H - -#define MIIMIND_BUSY 0x00000001 -#define MIIMIND_NOTVALID 0x00000004 -#define MIIMCFG_INIT_VALUE 0x00000007 -#define MIIMCFG_RESET 0x80000000 - -#define MII_READ_COMMAND 0x00000001 - -struct fsl_pq_mdio { - u8 res1[16]; - u32 ieventm; /* MDIO Interrupt event register (for etsec2)*/ - u32 imaskm; /* MDIO Interrupt mask register (for etsec2)*/ - u8 res2[4]; - u32 emapm; /* MDIO Event mapping register (for etsec2)*/ - u8 res3[1280]; - u32 miimcfg; /* MII management configuration reg */ - u32 miimcom; /* MII management command reg */ - u32 miimadd; /* MII management address reg */ - u32 miimcon; /* MII management control reg */ - u32 miimstat; /* MII management status reg */ - u32 miimind; /* MII management indication reg */ - u8 reserved[28]; /* Space holder */ - u32 utbipar; /* TBI phy address reg (only on UCC) */ - u8 res4[2728]; -} __packed; - -int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum); -int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); -int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id, - int regnum, u16 value); -int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs, int mii_id, int regnum); -int __init fsl_pq_mdio_init(void); -void fsl_pq_mdio_exit(void); -void fsl_pq_mdio_bus_name(char *name, struct device_node *np); -#endif /* FSL_PQ_MDIO_H */ diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index d3233f5..a1b52ec 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -100,7 +100,6 @@ #include <linux/of_net.h> #include "gianfar.h" -#include "fsl_pq_mdio.h" #define TX_TIMEOUT (1*HZ) @@ -395,7 +394,13 @@ static void gfar_init_mac(struct net_device *ndev) if (ndev->features & NETIF_F_IP_CSUM) tctrl |= TCTRL_INIT_CSUM; - tctrl |= TCTRL_TXSCHED_PRIO; + if (priv->prio_sched_en) + tctrl |= TCTRL_TXSCHED_PRIO; + else { + tctrl |= TCTRL_TXSCHED_WRRS; + gfar_write(®s->tr03wt, DEFAULT_WRRS_WEIGHT); + gfar_write(®s->tr47wt, DEFAULT_WRRS_WEIGHT); + } gfar_write(®s->tctrl, tctrl); @@ -1161,6 +1166,9 @@ static int gfar_probe(struct platform_device *ofdev) priv->rx_filer_enable = 1; /* Enable most messages by default */ priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1; + /* use pritority h/w tx queue scheduling for single queue devices */ + if (priv->num_tx_queues == 1) + priv->prio_sched_en = 1; /* Carrier starts down, phylib will bring it up */ netif_carrier_off(dev); diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index 2136c7f..4141ef2 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -301,8 +301,16 @@ extern const char gfar_driver_version[]; #define TCTRL_TFCPAUSE 0x00000008 #define TCTRL_TXSCHED_MASK 0x00000006 #define TCTRL_TXSCHED_INIT 0x00000000 +/* priority scheduling */ #define TCTRL_TXSCHED_PRIO 0x00000002 +/* weighted round-robin scheduling (WRRS) */ #define TCTRL_TXSCHED_WRRS 0x00000004 +/* default WRRS weight and policy setting, + * tailored to the tr03wt and tr47wt registers: + * equal weight for all Tx Qs, measured in 64byte units + */ +#define DEFAULT_WRRS_WEIGHT 0x18181818 + #define TCTRL_INIT_CSUM (TCTRL_TUCSEN | TCTRL_IPCSEN) #define IEVENT_INIT_CLEAR 0xffffffff @@ -1098,7 +1106,8 @@ struct gfar_private { extended_hash:1, bd_stash_en:1, rx_filer_enable:1, - wol_en:1; /* Wake-on-LAN enabled */ + wol_en:1, /* Wake-on-LAN enabled */ + prio_sched_en:1; /* Enable priorty based Tx scheduling in Hw */ unsigned short padding; /* PHY stuff */ diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index 0daa66b..b9db0e0 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -510,7 +510,7 @@ static int gianfar_ptp_probe(struct platform_device *dev) spin_unlock_irqrestore(&etsects->lock, flags); - etsects->clock = ptp_clock_register(&etsects->caps); + etsects->clock = ptp_clock_register(&etsects->caps, &dev->dev); if (IS_ERR(etsects->clock)) { err = PTR_ERR(etsects->clock); goto no_clock; diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index 21c6574..1642884 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -42,7 +42,6 @@ #include <asm/machdep.h> #include "ucc_geth.h" -#include "fsl_pq_mdio.h" #undef DEBUG diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c new file mode 100644 index 0000000..1afb5ea --- /dev/null +++ b/drivers/net/ethernet/freescale/xgmac_mdio.c @@ -0,0 +1,274 @@ +/* + * QorIQ 10G MDIO Controller + * + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Authors: Andy Fleming <afleming@freescale.com> + * Timur Tabi <timur@freescale.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/phy.h> +#include <linux/mdio.h> +#include <linux/of_platform.h> +#include <linux/of_mdio.h> + +/* Number of microseconds to wait for a register to respond */ +#define TIMEOUT 1000 + +struct tgec_mdio_controller { + __be32 reserved[12]; + __be32 mdio_stat; /* MDIO configuration and status */ + __be32 mdio_ctl; /* MDIO control */ + __be32 mdio_data; /* MDIO data */ + __be32 mdio_addr; /* MDIO address */ +} __packed; + +#define MDIO_STAT_CLKDIV(x) (((x>>1) & 0xff) << 8) +#define MDIO_STAT_BSY (1 << 0) +#define MDIO_STAT_RD_ER (1 << 1) +#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f) +#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5) +#define MDIO_CTL_PRE_DIS (1 << 10) +#define MDIO_CTL_SCAN_EN (1 << 11) +#define MDIO_CTL_POST_INC (1 << 14) +#define MDIO_CTL_READ (1 << 15) + +#define MDIO_DATA(x) (x & 0xffff) +#define MDIO_DATA_BSY (1 << 31) + +/* + * Wait untill the MDIO bus is free + */ +static int xgmac_wait_until_free(struct device *dev, + struct tgec_mdio_controller __iomem *regs) +{ + uint32_t status; + + /* Wait till the bus is free */ + status = spin_event_timeout( + !((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY), TIMEOUT, 0); + if (!status) { + dev_err(dev, "timeout waiting for bus to be free\n"); + return -ETIMEDOUT; + } + + return 0; +} + +/* + * Wait till the MDIO read or write operation is complete + */ +static int xgmac_wait_until_done(struct device *dev, + struct tgec_mdio_controller __iomem *regs) +{ + uint32_t status; + + /* Wait till the MDIO write is complete */ + status = spin_event_timeout( + !((in_be32(®s->mdio_data)) & MDIO_DATA_BSY), TIMEOUT, 0); + if (!status) { + dev_err(dev, "timeout waiting for operation to complete\n"); + return -ETIMEDOUT; + } + + return 0; +} + +/* + * Write value to the PHY for this device to the register at regnum,waiting + * until the write is done before it returns. All PHY configuration has to be + * done through the TSEC1 MIIM regs. + */ +static int xgmac_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 value) +{ + struct tgec_mdio_controller __iomem *regs = bus->priv; + uint16_t dev_addr = regnum >> 16; + int ret; + + /* Setup the MII Mgmt clock speed */ + out_be32(®s->mdio_stat, MDIO_STAT_CLKDIV(100)); + + ret = xgmac_wait_until_free(&bus->dev, regs); + if (ret) + return ret; + + /* Set the port and dev addr */ + out_be32(®s->mdio_ctl, + MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr)); + + /* Set the register address */ + out_be32(®s->mdio_addr, regnum & 0xffff); + + ret = xgmac_wait_until_free(&bus->dev, regs); + if (ret) + return ret; + + /* Write the value to the register */ + out_be32(®s->mdio_data, MDIO_DATA(value)); + + ret = xgmac_wait_until_done(&bus->dev, regs); + if (ret) + return ret; + + return 0; +} + +/* + * Reads from register regnum in the PHY for device dev, returning the value. + * Clears miimcom first. All PHY configuration has to be done through the + * TSEC1 MIIM regs. + */ +static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum) +{ + struct tgec_mdio_controller __iomem *regs = bus->priv; + uint16_t dev_addr = regnum >> 16; + uint32_t mdio_ctl; + uint16_t value; + int ret; + + /* Setup the MII Mgmt clock speed */ + out_be32(®s->mdio_stat, MDIO_STAT_CLKDIV(100)); + + ret = xgmac_wait_until_free(&bus->dev, regs); + if (ret) + return ret; + + /* Set the Port and Device Addrs */ + mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr); + out_be32(®s->mdio_ctl, mdio_ctl); + + /* Set the register address */ + out_be32(®s->mdio_addr, regnum & 0xffff); + + ret = xgmac_wait_until_free(&bus->dev, regs); + if (ret) + return ret; + + /* Initiate the read */ + out_be32(®s->mdio_ctl, mdio_ctl | MDIO_CTL_READ); + + ret = xgmac_wait_until_done(&bus->dev, regs); + if (ret) + return ret; + + /* Return all Fs if nothing was there */ + if (in_be32(®s->mdio_stat) & MDIO_STAT_RD_ER) { + dev_err(&bus->dev, "MDIO read error\n"); + return 0xffff; + } + + value = in_be32(®s->mdio_data) & 0xffff; + dev_dbg(&bus->dev, "read %04x\n", value); + + return value; +} + +/* Reset the MIIM registers, and wait for the bus to free */ +static int xgmac_mdio_reset(struct mii_bus *bus) +{ + struct tgec_mdio_controller __iomem *regs = bus->priv; + int ret; + + mutex_lock(&bus->mdio_lock); + + /* Setup the MII Mgmt clock speed */ + out_be32(®s->mdio_stat, MDIO_STAT_CLKDIV(100)); + + ret = xgmac_wait_until_free(&bus->dev, regs); + + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static int __devinit xgmac_mdio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mii_bus *bus; + struct resource res; + int ret; + + ret = of_address_to_resource(np, 0, &res); + if (ret) { + dev_err(&pdev->dev, "could not obtain address\n"); + return ret; + } + + bus = mdiobus_alloc_size(PHY_MAX_ADDR * sizeof(int)); + if (!bus) + return -ENOMEM; + + bus->name = "Freescale XGMAC MDIO Bus"; + bus->read = xgmac_mdio_read; + bus->write = xgmac_mdio_write; + bus->reset = xgmac_mdio_reset; + bus->irq = bus->priv; + bus->parent = &pdev->dev; + snprintf(bus->id, MII_BUS_ID_SIZE, "%llx", (unsigned long long)res.start); + + /* Set the PHY base address */ + bus->priv = of_iomap(np, 0); + if (!bus->priv) { + ret = -ENOMEM; + goto err_ioremap; + } + + ret = of_mdiobus_register(bus, np); + if (ret) { + dev_err(&pdev->dev, "cannot register MDIO bus\n"); + goto err_registration; + } + + dev_set_drvdata(&pdev->dev, bus); + + return 0; + +err_registration: + iounmap(bus->priv); + +err_ioremap: + mdiobus_free(bus); + + return ret; +} + +static int __devexit xgmac_mdio_remove(struct platform_device *pdev) +{ + struct mii_bus *bus = dev_get_drvdata(&pdev->dev); + + mdiobus_unregister(bus); + iounmap(bus->priv); + mdiobus_free(bus); + + return 0; +} + +static struct of_device_id xgmac_mdio_match[] = { + { + .compatible = "fsl,fman-xmdio", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, xgmac_mdio_match); + +static struct platform_driver xgmac_mdio_driver = { + .driver = { + .name = "fsl-fman_xmdio", + .of_match_table = xgmac_mdio_match, + }, + .probe = xgmac_mdio_probe, + .remove = xgmac_mdio_remove, +}; + +module_platform_driver(xgmac_mdio_driver); + +MODULE_DESCRIPTION("Freescale QorIQ 10G MDIO Controller"); +MODULE_LICENSE("GPL v2"); |
