diff options
Diffstat (limited to 'drivers/net/ethernet/freescale')
-rw-r--r-- | drivers/net/ethernet/freescale/fsl_pq_mdio.c | 34 |
1 files changed, 28 insertions, 6 deletions
diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c index 3c40f6b..55c3623 100644 --- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c +++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c @@ -198,11 +198,13 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus) #if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) /* + * Return the TBIPA address, starting from the address + * of the mapped GFAR MDIO registers (struct gfar) * This is mildly evil, but so is our hardware for doing this. * Also, we have to cast back to struct gfar because of * definition weirdness done in gianfar.h. */ -static uint32_t __iomem *get_gfar_tbipa(void __iomem *p) +static uint32_t __iomem *get_gfar_tbipa_from_mdio(void __iomem *p) { struct gfar __iomem *enet_regs = p; @@ -210,6 +212,15 @@ static uint32_t __iomem *get_gfar_tbipa(void __iomem *p) } /* + * Return the TBIPA address, starting from the address + * of the mapped GFAR MII registers (gfar_mii_regs[] within struct gfar) + */ +static uint32_t __iomem *get_gfar_tbipa_from_mii(void __iomem *p) +{ + return get_gfar_tbipa_from_mdio(container_of(p, struct gfar, gfar_mii_regs)); +} + +/* * Return the TBIPAR address for an eTSEC2 node */ static uint32_t __iomem *get_etsec_tbipa(void __iomem *p) @@ -220,11 +231,12 @@ static uint32_t __iomem *get_etsec_tbipa(void __iomem *p) #if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) /* - * Return the TBIPAR address for a QE MDIO node + * Return the TBIPAR address for a QE MDIO node, starting from the address + * of the mapped MII registers (struct fsl_pq_mii) */ static uint32_t __iomem *get_ucc_tbipa(void __iomem *p) { - struct fsl_pq_mdio __iomem *mdio = p; + struct fsl_pq_mdio __iomem *mdio = container_of(p, struct fsl_pq_mdio, mii); return &mdio->utbipar; } @@ -300,14 +312,14 @@ static const struct of_device_id fsl_pq_mdio_match[] = { .compatible = "fsl,gianfar-tbi", .data = &(struct fsl_pq_mdio_data) { .mii_offset = 0, - .get_tbipa = get_gfar_tbipa, + .get_tbipa = get_gfar_tbipa_from_mii, }, }, { .compatible = "fsl,gianfar-mdio", .data = &(struct fsl_pq_mdio_data) { .mii_offset = 0, - .get_tbipa = get_gfar_tbipa, + .get_tbipa = get_gfar_tbipa_from_mii, }, }, { @@ -315,7 +327,7 @@ static const struct of_device_id fsl_pq_mdio_match[] = { .compatible = "gianfar", .data = &(struct fsl_pq_mdio_data) { .mii_offset = offsetof(struct fsl_pq_mdio, mii), - .get_tbipa = get_gfar_tbipa, + .get_tbipa = get_gfar_tbipa_from_mdio, }, }, { @@ -445,6 +457,16 @@ static int fsl_pq_mdio_probe(struct platform_device *pdev) tbipa = data->get_tbipa(priv->map); + /* + * Add consistency check to make sure TBI is contained + * within the mapped range (not because we would get a + * segfault, rather to catch bugs in computing TBI + * address). Print error message but continue anyway. + */ + if ((void *)tbipa > priv->map + resource_size(&res) - 4) + dev_err(&pdev->dev, "invalid register map (should be at least 0x%04x to contain TBI address)\n", + ((void *)tbipa - priv->map) + 4); + iowrite32be(be32_to_cpup(prop), tbipa); } } |