summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/freescale/fec_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/freescale/fec_main.c')
-rw-r--r--drivers/net/ethernet/freescale/fec_main.c10
1 files changed, 6 insertions, 4 deletions
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 5ebdf8d..bba8777 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -91,7 +91,8 @@ static struct platform_device_id fec_devtype[] = {
.driver_data = 0,
}, {
.name = "imx28-fec",
- .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
+ .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME |
+ FEC_QUIRK_SINGLE_MDIO,
}, {
.name = "imx6q-fec",
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
@@ -1937,7 +1938,7 @@ static int fec_enet_mii_init(struct platform_device *pdev)
int err = -ENXIO, i;
/*
- * The dual fec interfaces are not equivalent with enet-mac.
+ * The i.MX28 dual fec interfaces are not equal.
* Here are the differences:
*
* - fec0 supports MII & RMII modes while fec1 only supports RMII
@@ -1952,7 +1953,7 @@ static int fec_enet_mii_init(struct platform_device *pdev)
* mdio interface in board design, and need to be configured by
* fec0 mii_bus.
*/
- if ((fep->quirks & FEC_QUIRK_ENET_MAC) && fep->dev_id > 0) {
+ if ((fep->quirks & FEC_QUIRK_SINGLE_MDIO) && fep->dev_id > 0) {
/* fec1 uses fec0 mii_bus */
if (mii_cnt && fec0_mii_bus) {
fep->mii_bus = fec0_mii_bus;
@@ -2015,7 +2016,7 @@ static int fec_enet_mii_init(struct platform_device *pdev)
mii_cnt++;
/* save fec0 mii_bus */
- if (fep->quirks & FEC_QUIRK_ENET_MAC)
+ if (fep->quirks & FEC_QUIRK_SINGLE_MDIO)
fec0_mii_bus = fep->mii_bus;
return 0;
@@ -3129,6 +3130,7 @@ fec_probe(struct platform_device *pdev)
pdev->id_entry = of_id->data;
fep->quirks = pdev->id_entry->driver_data;
+ fep->netdev = ndev;
fep->num_rx_queues = num_rx_qs;
fep->num_tx_queues = num_tx_qs;
OpenPOWER on IntegriCloud