summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/freescale/fec.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/freescale/fec.c')
-rw-r--r--drivers/net/ethernet/freescale/fec.c32
1 files changed, 26 insertions, 6 deletions
diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index ff7f4c5..fffd205 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -49,6 +49,7 @@
#include <linux/of_gpio.h>
#include <linux/of_net.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/regulator/consumer.h>
#include <asm/cacheflush.h>
@@ -1388,8 +1389,8 @@ fec_set_mac_address(struct net_device *ndev, void *p)
}
#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * fec_poll_controller: FEC Poll controller function
+/**
+ * fec_poll_controller - FEC Poll controller function
* @dev: The FEC network adapter
*
* Polled functionality used by netconsole and others in non interrupt mode
@@ -1506,18 +1507,25 @@ static int __devinit fec_get_phy_mode_dt(struct platform_device *pdev)
static void __devinit fec_reset_phy(struct platform_device *pdev)
{
int err, phy_reset;
+ int msec = 1;
struct device_node *np = pdev->dev.of_node;
if (!np)
return;
+ of_property_read_u32(np, "phy-reset-duration", &msec);
+ /* A sane reset duration should not be longer than 1s */
+ if (msec > 1000)
+ msec = 1;
+
phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
- err = gpio_request_one(phy_reset, GPIOF_OUT_INIT_LOW, "phy-reset");
+ err = devm_gpio_request_one(&pdev->dev, phy_reset,
+ GPIOF_OUT_INIT_LOW, "phy-reset");
if (err) {
pr_debug("FEC: failed to get gpio phy-reset: %d\n", err);
return;
}
- msleep(1);
+ msleep(msec);
gpio_set_value(phy_reset, 1);
}
#else /* CONFIG_OF */
@@ -1546,6 +1554,7 @@ fec_probe(struct platform_device *pdev)
const struct of_device_id *of_id;
static int dev_id;
struct pinctrl *pinctrl;
+ struct regulator *reg_phy;
of_id = of_match_device(fec_dt_ids, &pdev->dev);
if (of_id)
@@ -1593,8 +1602,6 @@ fec_probe(struct platform_device *pdev)
fep->phy_interface = ret;
}
- fec_reset_phy(pdev);
-
for (i = 0; i < FEC_IRQ_NUM; i++) {
irq = platform_get_irq(pdev, i);
if (irq < 0) {
@@ -1634,6 +1641,18 @@ fec_probe(struct platform_device *pdev)
clk_prepare_enable(fep->clk_ahb);
clk_prepare_enable(fep->clk_ipg);
+ reg_phy = devm_regulator_get(&pdev->dev, "phy");
+ if (!IS_ERR(reg_phy)) {
+ ret = regulator_enable(reg_phy);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to enable phy regulator: %d\n", ret);
+ goto failed_regulator;
+ }
+ }
+
+ fec_reset_phy(pdev);
+
ret = fec_enet_init(ndev);
if (ret)
goto failed_init;
@@ -1655,6 +1674,7 @@ failed_register:
fec_enet_mii_remove(fep);
failed_mii_init:
failed_init:
+failed_regulator:
clk_disable_unprepare(fep->clk_ahb);
clk_disable_unprepare(fep->clk_ipg);
failed_pin:
OpenPOWER on IntegriCloud