diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 51 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 954 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/sge.c | 341 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 734 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.h | 80 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_regs.h | 185 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h | 97 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 5 |
9 files changed, 2169 insertions, 280 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index ec2dafe..745a1f5 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -67,12 +67,12 @@ enum { }; enum { - MEMWIN0_APERTURE = 65536, - MEMWIN0_BASE = 0x30000, + MEMWIN0_APERTURE = 2048, + MEMWIN0_BASE = 0x1b800, MEMWIN1_APERTURE = 32768, MEMWIN1_BASE = 0x28000, - MEMWIN2_APERTURE = 2048, - MEMWIN2_BASE = 0x1b800, + MEMWIN2_APERTURE = 65536, + MEMWIN2_BASE = 0x30000, }; enum dev_master { @@ -211,6 +211,9 @@ struct tp_err_stats { struct tp_params { unsigned int ntxchan; /* # of Tx channels */ unsigned int tre; /* log2 of core clocks per TP tick */ + + uint32_t dack_re; /* DACK timer resolution */ + unsigned short tx_modq[NCHAN]; /* channel to modulation queue map */ }; struct vpd_params { @@ -315,6 +318,10 @@ enum { /* adapter flags */ USING_MSI = (1 << 1), USING_MSIX = (1 << 2), FW_OK = (1 << 4), + RSS_TNLALLLOOKUP = (1 << 5), + USING_SOFT_PARAMS = (1 << 6), + MASTER_PF = (1 << 7), + FW_OFLD_CONN = (1 << 9), }; struct rx_sw_desc; @@ -467,6 +474,11 @@ struct sge { u16 rdma_rxq[NCHAN]; u16 timer_val[SGE_NTIMERS]; u8 counter_val[SGE_NCOUNTERS]; + u32 fl_pg_order; /* large page allocation size */ + u32 stat_len; /* length of status page at ring end */ + u32 pktshift; /* padding between CPL & packet data */ + u32 fl_align; /* response queue message alignment */ + u32 fl_starve_thres; /* Free List starvation threshold */ unsigned int starve_thres; u8 idma_state[2]; unsigned int egr_start; @@ -511,6 +523,8 @@ struct adapter { struct net_device *port[MAX_NPORTS]; u8 chan_map[NCHAN]; /* channel -> port map */ + unsigned int l2t_start; + unsigned int l2t_end; struct l2t_data *l2t; void *uld_handle[CXGB4_ULD_MAX]; struct list_head list_node; @@ -619,7 +633,7 @@ int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq, int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq, struct net_device *dev, unsigned int iqid); irqreturn_t t4_sge_intr_msix(int irq, void *cookie); -void t4_sge_init(struct adapter *adap); +int t4_sge_init(struct adapter *adap); void t4_sge_start(struct adapter *adap); void t4_sge_stop(struct adapter *adap); extern int dbfifo_int_thresh; @@ -638,6 +652,14 @@ static inline unsigned int us_to_core_ticks(const struct adapter *adap, return (us * adap->params.vpd.cclk) / 1000; } +static inline unsigned int core_ticks_to_us(const struct adapter *adapter, + unsigned int ticks) +{ + /* add Core Clock / 2 to round ticks to nearest uS */ + return ((ticks * 1000 + adapter->params.vpd.cclk/2) / + adapter->params.vpd.cclk); +} + void t4_set_reg_field(struct adapter *adap, unsigned int addr, u32 mask, u32 val); @@ -656,6 +678,9 @@ static inline int t4_wr_mbox_ns(struct adapter *adap, int mbox, const void *cmd, return t4_wr_mbox_meat(adap, mbox, cmd, size, rpl, false); } +void t4_write_indirect(struct adapter *adap, unsigned int addr_reg, + unsigned int data_reg, const u32 *vals, + unsigned int nregs, unsigned int start_idx); void t4_intr_enable(struct adapter *adapter); void t4_intr_disable(struct adapter *adapter); int t4_slow_intr_handler(struct adapter *adapter); @@ -664,8 +689,12 @@ int t4_wait_dev_ready(struct adapter *adap); int t4_link_start(struct adapter *adap, unsigned int mbox, unsigned int port, struct link_config *lc); int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port); +int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len, + __be32 *buf); int t4_seeprom_wp(struct adapter *adapter, bool enable); +int get_vpd_params(struct adapter *adapter, struct vpd_params *p); int t4_load_fw(struct adapter *adapter, const u8 *fw_data, unsigned int size); +unsigned int t4_flash_cfg_addr(struct adapter *adapter); int t4_check_fw_version(struct adapter *adapter); int t4_prep_adapter(struct adapter *adapter); int t4_port_init(struct adapter *adap, int mbox, int pf, int vf); @@ -680,6 +709,8 @@ int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p); void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log); +void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr, + unsigned int mask, unsigned int val); void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4, struct tp_tcp_stats *v6); void t4_load_mtus(struct adapter *adap, const unsigned short *mtus, @@ -695,6 +726,16 @@ int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, int t4_fw_bye(struct adapter *adap, unsigned int mbox); int t4_early_init(struct adapter *adap, unsigned int mbox); int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset); +int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force); +int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset); +int t4_fw_upgrade(struct adapter *adap, unsigned int mbox, + const u8 *fw_data, unsigned int size, int force); +int t4_fw_config_file(struct adapter *adap, unsigned int mbox, + unsigned int mtype, unsigned int maddr, + u32 *finiver, u32 *finicsum, u32 *cfcsum); +int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, + unsigned int cache_line_size); +int t4_fw_initialize(struct adapter *adap, unsigned int mbox); int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int nparams, const u32 *params, u32 *val); diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 9339854..6b9f6bb 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -78,28 +78,45 @@ */ #define MAX_SGE_TIMERVAL 200U -#ifdef CONFIG_PCI_IOV -/* - * Virtual Function provisioning constants. We need two extra Ingress Queues - * with Interrupt capability to serve as the VF's Firmware Event Queue and - * Forwarded Interrupt Queue (when using MSI mode) -- neither will have Free - * Lists associated with them). For each Ethernet/Control Egress Queue and - * for each Free List, we need an Egress Context. - */ enum { + /* + * Physical Function provisioning constants. + */ + PFRES_NVI = 4, /* # of Virtual Interfaces */ + PFRES_NETHCTRL = 128, /* # of EQs used for ETH or CTRL Qs */ + PFRES_NIQFLINT = 128, /* # of ingress Qs/w Free List(s)/intr + */ + PFRES_NEQ = 256, /* # of egress queues */ + PFRES_NIQ = 0, /* # of ingress queues */ + PFRES_TC = 0, /* PCI-E traffic class */ + PFRES_NEXACTF = 128, /* # of exact MPS filters */ + + PFRES_R_CAPS = FW_CMD_CAP_PF, + PFRES_WX_CAPS = FW_CMD_CAP_PF, + +#ifdef CONFIG_PCI_IOV + /* + * Virtual Function provisioning constants. We need two extra Ingress + * Queues with Interrupt capability to serve as the VF's Firmware + * Event Queue and Forwarded Interrupt Queue (when using MSI mode) -- + * neither will have Free Lists associated with them). For each + * Ethernet/Control Egress Queue and for each Free List, we need an + * Egress Context. + */ VFRES_NPORTS = 1, /* # of "ports" per VF */ VFRES_NQSETS = 2, /* # of "Queue Sets" per VF */ VFRES_NVI = VFRES_NPORTS, /* # of Virtual Interfaces */ VFRES_NETHCTRL = VFRES_NQSETS, /* # of EQs used for ETH or CTRL Qs */ VFRES_NIQFLINT = VFRES_NQSETS+2,/* # of ingress Qs/w Free List(s)/intr */ - VFRES_NIQ = 0, /* # of non-fl/int ingress queues */ VFRES_NEQ = VFRES_NQSETS*2, /* # of egress queues */ + VFRES_NIQ = 0, /* # of non-fl/int ingress queues */ VFRES_TC = 0, /* PCI-E traffic class */ VFRES_NEXACTF = 16, /* # of exact MPS filters */ VFRES_R_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF|FW_CMD_CAP_PORT, VFRES_WX_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF, +#endif }; /* @@ -146,7 +163,6 @@ static unsigned int pfvfres_pmask(struct adapter *adapter, } /*NOTREACHED*/ } -#endif enum { MAX_TXQ_ENTRIES = 16384, @@ -193,6 +209,7 @@ static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = { }; #define FW_FNAME "cxgb4/t4fw.bin" +#define FW_CFNAME "cxgb4/t4-config.txt" MODULE_DESCRIPTION(DRV_DESC); MODULE_AUTHOR("Chelsio Communications"); @@ -201,6 +218,28 @@ MODULE_VERSION(DRV_VERSION); MODULE_DEVICE_TABLE(pci, cxgb4_pci_tbl); MODULE_FIRMWARE(FW_FNAME); +/* + * Normally we're willing to become the firmware's Master PF but will be happy + * if another PF has already become the Master and initialized the adapter. + * Setting "force_init" will cause this driver to forcibly establish itself as + * the Master PF and initialize the adapter. + */ +static uint force_init; + +module_param(force_init, uint, 0644); +MODULE_PARM_DESC(force_init, "Forcibly become Master PF and initialize adapter"); + +/* + * Normally if the firmware we connect to has Configuration File support, we + * use that and only fall back to the old Driver-based initialization if the + * Configuration File fails for some reason. If force_old_init is set, then + * we'll always use the old Driver-based initialization sequence. + */ +static uint force_old_init; + +module_param(force_old_init, uint, 0644); +MODULE_PARM_DESC(force_old_init, "Force old initialization sequence"); + static int dflt_msg_enable = DFLT_MSG_ENABLE; module_param(dflt_msg_enable, int, 0644); @@ -236,6 +275,20 @@ module_param_array(intr_cnt, uint, NULL, 0644); MODULE_PARM_DESC(intr_cnt, "thresholds 1..3 for queue interrupt packet counters"); +/* + * Normally we tell the chip to deliver Ingress Packets into our DMA buffers + * offset by 2 bytes in order to have the IP headers line up on 4-byte + * boundaries. This is a requirement for many architectures which will throw + * a machine check fault if an attempt is made to access one of the 4-byte IP + * header fields on a non-4-byte boundary. And it's a major performance issue + * even on some architectures which allow it like some implementations of the + * x86 ISA. However, some architectures don't mind this and for some very + * edge-case performance sensitive applications (like forwarding large volumes + * of small packets), setting this DMA offset to 0 will decrease the number of + * PCI-E Bus transfers enough to measurably affect performance. + */ +static int rx_dma_offset = 2; + static bool vf_acls; #ifdef CONFIG_PCI_IOV @@ -248,6 +301,30 @@ module_param_array(num_vf, uint, NULL, 0644); MODULE_PARM_DESC(num_vf, "number of VFs for each of PFs 0-3"); #endif +/* + * The filter TCAM has a fixed portion and a variable portion. The fixed + * portion can match on source/destination IP IPv4/IPv6 addresses and TCP/UDP + * ports. The variable portion is 36 bits which can include things like Exact + * Match MAC Index (9 bits), Ether Type (16 bits), IP Protocol (8 bits), + * [Inner] VLAN Tag (17 bits), etc. which, if all were somehow selected, would + * far exceed the 36-bit budget for this "compressed" header portion of the + * filter. Thus, we have a scarce resource which must be carefully managed. + * + * By default we set this up to mostly match the set of filter matching + * capabilities of T3 but with accommodations for some of T4's more + * interesting features: + * + * { IP Fragment (1), MPS Match Type (3), IP Protocol (8), + * [Inner] VLAN (17), Port (3), FCoE (1) } + */ +enum { + TP_VLAN_PRI_MAP_DEFAULT = HW_TPL_FR_MT_PR_IV_P_FC, + TP_VLAN_PRI_MAP_FIRST = FCOE_SHIFT, + TP_VLAN_PRI_MAP_LAST = FRAGMENTATION_SHIFT, +}; + +static unsigned int tp_vlan_pri_map = TP_VLAN_PRI_MAP_DEFAULT; + static struct dentry *cxgb4_debugfs_root; static LIST_HEAD(adapter_list); @@ -852,11 +929,25 @@ static int upgrade_fw(struct adapter *adap) */ if (FW_HDR_FW_VER_MAJOR_GET(adap->params.fw_vers) != FW_VERSION_MAJOR || vers > adap->params.fw_vers) { - ret = -t4_load_fw(adap, fw->data, fw->size); + dev_info(dev, "upgrading firmware ...\n"); + ret = t4_fw_upgrade(adap, adap->mbox, fw->data, fw->size, + /*force=*/false); if (!ret) - dev_info(dev, "firmware upgraded to version %pI4 from " - FW_FNAME "\n", &hdr->fw_ver); + dev_info(dev, "firmware successfully upgraded to " + FW_FNAME " (%d.%d.%d.%d)\n", + FW_HDR_FW_VER_MAJOR_GET(vers), + FW_HDR_FW_VER_MINOR_GET(vers), + FW_HDR_FW_VER_MICRO_GET(vers), + FW_HDR_FW_VER_BUILD_GET(vers)); + else + dev_err(dev, "firmware upgrade failed! err=%d\n", -ret); + } else { + /* + * Tell our caller that we didn't upgrade the firmware. + */ + ret = -EINVAL; } + out: release_firmware(fw); return ret; } @@ -2470,8 +2561,8 @@ int cxgb4_sync_txq_pidx(struct net_device *dev, u16 qid, u16 pidx, else delta = size - hw_pidx + pidx; wmb(); - t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL), - V_QID(qid) | V_PIDX(delta)); + t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL), + QID(qid) | PIDX(delta)); } out: return ret; @@ -2579,8 +2670,8 @@ static void sync_txq_pidx(struct adapter *adap, struct sge_txq *q) else delta = q->size - hw_pidx + q->db_pidx; wmb(); - t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL), - V_QID(q->cntxt_id) | V_PIDX(delta)); + t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL), + QID(q->cntxt_id) | PIDX(delta)); } out: q->db_disabled = 0; @@ -2617,9 +2708,9 @@ static void process_db_full(struct work_struct *work) notify_rdma_uld(adap, CXGB4_CONTROL_DB_FULL); drain_db_fifo(adap, dbfifo_drain_delay); - t4_set_reg_field(adap, A_SGE_INT_ENABLE3, - F_DBFIFO_HP_INT | F_DBFIFO_LP_INT, - F_DBFIFO_HP_INT | F_DBFIFO_LP_INT); + t4_set_reg_field(adap, SGE_INT_ENABLE3, + DBFIFO_HP_INT | DBFIFO_LP_INT, + DBFIFO_HP_INT | DBFIFO_LP_INT); notify_rdma_uld(adap, CXGB4_CONTROL_DB_EMPTY); } @@ -2639,8 +2730,8 @@ static void process_db_drop(struct work_struct *work) void t4_db_full(struct adapter *adap) { - t4_set_reg_field(adap, A_SGE_INT_ENABLE3, - F_DBFIFO_HP_INT | F_DBFIFO_LP_INT, 0); + t4_set_reg_field(adap, SGE_INT_ENABLE3, + DBFIFO_HP_INT | DBFIFO_LP_INT, 0); queue_work(workq, &adap->db_full_task); } @@ -3076,6 +3167,10 @@ static void setup_memwin(struct adapter *adap) t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2), (bar0 + MEMWIN2_BASE) | BIR(0) | WINDOW(ilog2(MEMWIN2_APERTURE) - 10)); +} + +static void setup_memwin_rdma(struct adapter *adap) +{ if (adap->vres.ocq.size) { unsigned int start, sz_kb; @@ -3155,6 +3250,488 @@ static int adap_init1(struct adapter *adap, struct fw_caps_config_cmd *c) /* * Phase 0 of initialization: contact FW, obtain config, perform basic init. + * + * If the firmware we're dealing with has Configuration File support, then + * we use that to perform all configuration + */ + +/* + * Tweak configuration based on module parameters, etc. Most of these have + * defaults assigned to them by Firmware Configuration Files (if we're using + * them) but need to be explicitly set if we're using hard-coded + * initialization. But even in the case of using Firmware Configuration + * Files, we'd like to expose the ability to change these via module + * parameters so these are essentially common tweaks/settings for + * Configuration Files and hard-coded initialization ... + */ +static int adap_init0_tweaks(struct adapter *adapter) +{ + /* + * Fix up various Host-Dependent Parameters like Page Size, Cache + * Line Size, etc. The firmware default is for a 4KB Page Size and + * 64B Cache Line Size ... + */ + t4_fixup_host_params(adapter, PAGE_SIZE, L1_CACHE_BYTES); + + /* + * Process module parameters which affect early initialization. + */ + if (rx_dma_offset != 2 && rx_dma_offset != 0) { + dev_err(&adapter->pdev->dev, + "Ignoring illegal rx_dma_offset=%d, using 2\n", + rx_dma_offset); + rx_dma_offset = 2; + } + t4_set_reg_field(adapter, SGE_CONTROL, + PKTSHIFT_MASK, + PKTSHIFT(rx_dma_offset)); + + /* + * Don't include the "IP Pseudo Header" in CPL_RX_PKT checksums: Linux + * adds the pseudo header itself. + */ + t4_tp_wr_bits_indirect(adapter, TP_INGRESS_CONFIG, + CSUM_HAS_PSEUDO_HDR, 0); + + return 0; +} + +/* + * Attempt to initialize the adapter via a Firmware Configuration File. + */ +static int adap_init0_config(struct adapter *adapter, int reset) +{ + struct fw_caps_config_cmd caps_cmd; + const struct firmware *cf; + unsigned long mtype = 0, maddr = 0; + u32 finiver, finicsum, cfcsum; + int ret, using_flash; + + /* + * Reset device if necessary. + */ + if (reset) { + ret = t4_fw_reset(adapter, adapter->mbox, + PIORSTMODE | PIORST); + if (ret < 0) + goto bye; + } + + /* + * If we have a T4 configuration file under /lib/firmware/cxgb4/, + * then use that. Otherwise, use the configuration file stored + * in the adapter flash ... + */ + ret = request_firmware(&cf, FW_CFNAME, adapter->pdev_dev); + if (ret < 0) { + using_flash = 1; + mtype = FW_MEMTYPE_CF_FLASH; + maddr = t4_flash_cfg_addr(adapter); + } else { + u32 params[7], val[7]; + + using_flash = 0; + if (cf->size >= FLASH_CFG_MAX_SIZE) + ret = -ENOMEM; + else { + params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF)); + ret = t4_query_params(adapter, adapter->mbox, + adapter->fn, 0, 1, params, val); + if (ret == 0) { + /* + * For t4_memory_write() below addresses and + * sizes have to be in terms of multiples of 4 + * bytes. So, if the Configuration File isn't + * a multiple of 4 bytes in length we'll have + * to write that out separately since we can't + * guarantee that the bytes following the + * residual byte in the buffer returned by + * request_firmware() are zeroed out ... + */ + size_t resid = cf->size & 0x3; + size_t size = cf->size & ~0x3; + __be32 *data = (__be32 *)cf->data; + + mtype = FW_PARAMS_PARAM_Y_GET(val[0]); + maddr = FW_PARAMS_PARAM_Z_GET(val[0]) << 16; + + ret = t4_memory_write(adapter, mtype, maddr, + size, data); + if (ret == 0 && resid != 0) { + union { + __be32 word; + char buf[4]; + } last; + int i; + + last.word = data[size >> 2]; + for (i = resid; i < 4; i++) + last.buf[i] = 0; + ret = t4_memory_write(adapter, mtype, + maddr + size, + 4, &last.word); + } + } + } + + release_firmware(cf); + if (ret) + goto bye; + } + + /* + * Issue a Capability Configuration command to the firmware to get it + * to parse the Configuration File. We don't use t4_fw_config_file() + * because we want the ability to modify various features after we've + * processed the configuration file ... + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ); + caps_cmd.retval_len16 = + htonl(FW_CAPS_CONFIG_CMD_CFVALID | + FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | + FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | + FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + if (ret < 0) + goto bye; + + finiver = ntohl(caps_cmd.finiver); + finicsum = ntohl(caps_cmd.finicsum); + cfcsum = ntohl(caps_cmd.cfcsum); + if (finicsum != cfcsum) + dev_warn(adapter->pdev_dev, "Configuration File checksum "\ + "mismatch: [fini] csum=%#x, computed csum=%#x\n", + finicsum, cfcsum); + + /* + * If we're a pure NIC driver then disable all offloading facilities. + * This will allow the firmware to optimize aspects of the hardware + * configuration which will result in improved performance. + */ + caps_cmd.ofldcaps = 0; + caps_cmd.iscsicaps = 0; + caps_cmd.rdmacaps = 0; + caps_cmd.fcoecaps = 0; + + /* + * And now tell the firmware to use the configuration we just loaded. + */ + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE); + caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + NULL); + if (ret < 0) + goto bye; + + /* + * Tweak configuration based on system architecture, module + * parameters, etc. + */ + ret = adap_init0_tweaks(adapter); + if (ret < 0) + goto bye; + + /* + * And finally tell the firmware to initialize itself using the + * parameters from the Configuration File. + */ + ret = t4_fw_initialize(adapter, adapter->mbox); + if (ret < 0) + goto bye; + + /* + * Return successfully and note that we're operating with parameters + * not supplied by the driver, rather than from hard-wired + * initialization constants burried in the driver. + */ + adapter->flags |= USING_SOFT_PARAMS; + dev_info(adapter->pdev_dev, "Successfully configured using Firmware "\ + "Configuration File %s, version %#x, computed checksum %#x\n", + (using_flash + ? "in device FLASH" + : "/lib/firmware/" FW_CFNAME), + finiver, cfcsum); + return 0; + + /* + * Something bad happened. Return the error ... (If the "error" + * is that there's no Configuration File on the adapter we don't + * want to issue a warning since this is fairly common.) + */ +bye: + if (ret != -ENOENT) + dev_warn(adapter->pdev_dev, "Configuration file error %d\n", + -ret); + return ret; +} + +/* + * Attempt to initialize the adapter via hard-coded, driver supplied + * parameters ... + */ +static int adap_init0_no_config(struct adapter *adapter, int reset) +{ + struct sge *s = &adapter->sge; + struct fw_caps_config_cmd caps_cmd; + u32 v; + int i, ret; + + /* + * Reset device if necessary + */ + if (reset) { + ret = t4_fw_reset(adapter, adapter->mbox, + PIORSTMODE | PIORST); + if (ret < 0) + goto bye; + } + + /* + * Get device capabilities and select which we'll be using. + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | FW_CMD_READ); + caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + if (ret < 0) + goto bye; + +#ifndef CONFIG_CHELSIO_T4_OFFLOAD + /* + * If we're a pure NIC driver then disable all offloading facilities. + * This will allow the firmware to optimize aspects of the hardware + * configuration which will result in improved performance. + */ + caps_cmd.ofldcaps = 0; + caps_cmd.iscsicaps = 0; + caps_cmd.rdmacaps = 0; + caps_cmd.fcoecaps = 0; +#endif + + if (caps_cmd.niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) { + if (!vf_acls) + caps_cmd.niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM); + else + caps_cmd.niccaps = htons(FW_CAPS_CONFIG_NIC_VM); + } else if (vf_acls) { + dev_err(adapter->pdev_dev, "virtualization ACLs not supported"); + goto bye; + } + caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | FW_CMD_WRITE); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + NULL); + if (ret < 0) + goto bye; + + /* + * Tweak configuration based on system architecture, module + * parameters, etc. + */ + ret = adap_init0_tweaks(adapter); + if (ret < 0) + goto bye; + + /* + * Select RSS Global Mode we want to use. We use "Basic Virtual" + * mode which maps each Virtual Interface to its own section of + * the RSS Table and we turn on all map and hash enables ... + */ + adapter->flags |= RSS_TNLALLLOOKUP; + ret = t4_config_glbl_rss(adapter, adapter->mbox, + FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL, + FW_RSS_GLB_CONFIG_CMD_TNLMAPEN | + FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ | + ((adapter->flags & RSS_TNLALLLOOKUP) ? + FW_RSS_GLB_CONFIG_CMD_TNLALLLKP : 0)); + if (ret < 0) + goto bye; + + /* + * Set up our own fundamental resource provisioning ... + */ + ret = t4_cfg_pfvf(adapter, adapter->mbox, adapter->fn, 0, + PFRES_NEQ, PFRES_NETHCTRL, + PFRES_NIQFLINT, PFRES_NIQ, + PFRES_TC, PFRES_NVI, + FW_PFVF_CMD_CMASK_MASK, + pfvfres_pmask(adapter, adapter->fn, 0), + PFRES_NEXACTF, + PFRES_R_CAPS, PFRES_WX_CAPS); + if (ret < 0) + goto bye; + + /* + * Perform low level SGE initialization. We need to do this before we + * send the firmware the INITIALIZE command because that will cause + * any other PF Drivers which are waiting for the Master + * Initialization to proceed forward. + */ + for (i = 0; i < SGE_NTIMERS - 1; i++) + s->timer_val[i] = min(intr_holdoff[i], MAX_SGE_TIMERVAL); + s->timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL; + s->counter_val[0] = 1; + for (i = 1; i < SGE_NCOUNTERS; i++) + s->counter_val[i] = min(intr_cnt[i - 1], + THRESHOLD_0_GET(THRESHOLD_0_MASK)); + t4_sge_init(adapter); + +#ifdef CONFIG_PCI_IOV + /* + * Provision resource limits for Virtual Functions. We currently + * grant them all the same static resource limits except for the Port + * Access Rights Mask which we're assigning based on the PF. All of + * the static provisioning stuff for both the PF and VF really needs + * to be managed in a persistent manner for each device which the + * firmware controls. + */ + { + int pf, vf; + + for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) { + if (num_vf[pf] <= 0) + continue; + + /* VF numbering starts at 1! */ + for (vf = 1; vf <= num_vf[pf]; vf++) { + ret = t4_cfg_pfvf(adapter, adapter->mbox, + pf, vf, + VFRES_NEQ, VFRES_NETHCTRL, + VFRES_NIQFLINT, VFRES_NIQ, + VFRES_TC, VFRES_NVI, + FW_PFVF_CMD_CMASK_GET( + FW_PFVF_CMD_CMASK_MASK), + pfvfres_pmask( + adapter, pf, vf), + VFRES_NEXACTF, + VFRES_R_CAPS, VFRES_WX_CAPS); + if (ret < 0) + dev_warn(adapter->pdev_dev, + "failed to "\ + "provision pf/vf=%d/%d; " + "err=%d\n", pf, vf, ret); + } + } + } +#endif + + /* + * Set up the default filter mode. Later we'll want to implement this + * via a firmware command, etc. ... This needs to be done before the + * firmare initialization command ... If the selected set of fields + * isn't equal to the default value, we'll need to make sure that the + * field selections will fit in the 36-bit budget. + */ + if (tp_vlan_pri_map != TP_VLAN_PRI_MAP_DEFAULT) { + int i, bits = 0; + + for (i = TP_VLAN_PRI_MAP_FIRST; i <= TP_VLAN_PRI_MAP_LAST; i++) + switch (tp_vlan_pri_map & (1 << i)) { + case 0: + /* compressed filter field not enabled */ + break; + case FCOE_MASK: + bits += 1; + break; + case PORT_MASK: + bits += 3; + break; + case VNIC_ID_MASK: + bits += 17; + break; + case VLAN_MASK: + bits += 17; + break; + case TOS_MASK: + bits += 8; + break; + case PROTOCOL_MASK: + bits += 8; + break; + case ETHERTYPE_MASK: + bits += 16; + break; + case MACMATCH_MASK: + bits += 9; + break; + case MPSHITTYPE_MASK: + bits += 3; + break; + case FRAGMENTATION_MASK: + bits += 1; + break; + } + + if (bits > 36) { + dev_err(adapter->pdev_dev, + "tp_vlan_pri_map=%#x needs %d bits > 36;"\ + " using %#x\n", tp_vlan_pri_map, bits, + TP_VLAN_PRI_MAP_DEFAULT); + tp_vlan_pri_map = TP_VLAN_PRI_MAP_DEFAULT; + } + } + v = tp_vlan_pri_map; + t4_write_indirect(adapter, TP_PIO_ADDR, TP_PIO_DATA, + &v, 1, TP_VLAN_PRI_MAP); + + /* + * We need Five Tuple Lookup mode to be set in TP_GLOBAL_CONFIG order + * to support any of the compressed filter fields above. Newer + * versions of the firmware do this automatically but it doesn't hurt + * to set it here. Meanwhile, we do _not_ need to set Lookup Every + * Packet in TP_INGRESS_CONFIG to support matching non-TCP packets + * since the firmware automatically turns this on and off when we have + * a non-zero number of filters active (since it does have a + * performance impact). + */ + if (tp_vlan_pri_map) + t4_set_reg_field(adapter, TP_GLOBAL_CONFIG, + FIVETUPLELOOKUP_MASK, + FIVETUPLELOOKUP_MASK); + + /* + * Tweak some settings. + */ + t4_write_reg(adapter, TP_SHIFT_CNT, SYNSHIFTMAX(6) | + RXTSHIFTMAXR1(4) | RXTSHIFTMAXR2(15) | + PERSHIFTBACKOFFMAX(8) | PERSHIFTMAX(8) | + KEEPALIVEMAXR1(4) | KEEPALIVEMAXR2(9)); + + /* + * Get basic stuff going by issuing the Firmware Initialize command. + * Note that this _must_ be after all PFVF commands ... + */ + ret = t4_fw_initialize(adapter, adapter->mbox); + if (ret < 0) + goto bye; + + /* + * Return successfully! + */ + dev_info(adapter->pdev_dev, "Successfully configured using built-in "\ + "driver parameters\n"); + return 0; + + /* + * Something bad happened. Return the error ... + */ +bye: + return ret; +} + +/* + * Phase 0 of initialization: contact FW, obtain config, perform basic init. */ static int adap_init0(struct adapter *adap) { @@ -3162,72 +3739,216 @@ static int adap_init0(struct adapter *adap) u32 v, port_vec; enum dev_state state; u32 params[7], val[7]; - struct fw_caps_config_cmd c; - - ret = t4_check_fw_version(adap); - if (ret == -EINVAL || ret > 0) { - if (upgrade_fw(adap) >= 0) /* recache FW version */ - ret = t4_check_fw_version(adap); - } - if (ret < 0) - return ret; + int reset = 1, j; - /* contact FW, request master */ - ret = t4_fw_hello(adap, adap->fn, adap->fn, MASTER_MUST, &state); + /* + * Contact FW, advertising Master capability (and potentially forcing + * ourselves as the Master PF if our module parameter force_init is + * set). + */ + ret = t4_fw_hello(adap, adap->mbox, adap->fn, + force_init ? MASTER_MUST : MASTER_MAY, + &state); if (ret < 0) { dev_err(adap->pdev_dev, "could not connect to FW, error %d\n", ret); return ret; } + if (ret == adap->mbox) + adap->flags |= MASTER_PF; + if (force_init && state == DEV_STATE_INIT) + state = DEV_STATE_UNINIT; - /* reset device */ - ret = t4_fw_reset(adap, adap->fn, PIORSTMODE | PIORST); - if (ret < 0) - goto bye; - - for (v = 0; v < SGE_NTIMERS - 1; v++) - adap->sge.timer_val[v] = min(intr_holdoff[v], MAX_SGE_TIMERVAL); - adap->sge.timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL; - adap->sge.counter_val[0] = 1; - for (v = 1; v < SGE_NCOUNTERS; v++) - adap->sge.counter_val[v] = min(intr_cnt[v - 1], - THRESHOLD_3_MASK); -#define FW_PARAM_DEV(param) \ - (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \ - FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param)) + /* + * If we're the Master PF Driver and the device is uninitialized, + * then let's consider upgrading the firmware ... (We always want + * to check the firmware version number in order to A. get it for + * later reporting and B. to warn if the currently loaded firmware + * is excessively mismatched relative to the driver.) + */ + ret = t4_check_fw_version(adap); + if ((adap->flags & MASTER_PF) && state != DEV_STATE_INIT) { + if (ret == -EINVAL || ret > 0) { + if (upgrade_fw(adap) >= 0) { + /* + * Note that the chip was reset as part of the + * firmware upgrade so we don't reset it again + * below and grab the new firmware version. + */ + reset = 0; + ret = t4_check_fw_version(adap); + } + } + if (ret < 0) + return ret; + } - params[0] = FW_PARAM_DEV(CCLK); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 1, params, val); + /* + * Grab VPD parameters. This should be done after we establish a + * connection to the firmware since some of the VPD parameters + * (notably the Core Clock frequency) are retrieved via requests to + * the firmware. On the other hand, we need these fairly early on + * so we do this right after getting ahold of the firmware. + */ + ret = get_vpd_params(adap, &adap->params.vpd); if (ret < 0) goto bye; - adap->params.vpd.cclk = val[0]; - ret = adap_init1(adap, &c); + /* + * Find out what ports are available to us. Note that we need to do + * this before calling adap_init0_no_config() since it needs nports + * and portvec ... + */ + v = + FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_PORTVEC); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1, &v, &port_vec); if (ret < 0) goto bye; + adap->params.nports = hweight32(port_vec); + adap->params.portvec = port_vec; + + /* + * If the firmware is initialized already (and we're not forcing a + * master initialization), note that we're living with existing + * adapter parameters. Otherwise, it's time to try initializing the + * adapter ... + */ + if (state == DEV_STATE_INIT) { + dev_info(adap->pdev_dev, "Coming up as %s: "\ + "Adapter already initialized\n", + adap->flags & MASTER_PF ? "MASTER" : "SLAVE"); + adap->flags |= USING_SOFT_PARAMS; + } else { + dev_info(adap->pdev_dev, "Coming up as MASTER: "\ + "Initializing adapter\n"); + + /* + * If the firmware doesn't support Configuration + * Files warn user and exit, + */ + if (ret < 0) + dev_warn(adap->pdev_dev, "Firmware doesn't support " + "configuration file.\n"); + if (force_old_init) + ret = adap_init0_no_config(adap, reset); + else { + /* + * Find out whether we're dealing with a version of + * the firmware which has configuration file support. + */ + params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF)); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1, + params, val); + + /* + * If the firmware doesn't support Configuration + * Files, use the old Driver-based, hard-wired + * initialization. Otherwise, try using the + * Configuration File support and fall back to the + * Driver-based initialization if there's no + * Configuration File found. + */ + if (ret < 0) + ret = adap_init0_no_config(adap, reset); + else { + /* + * The firmware provides us with a memory + * buffer where we can load a Configuration + * File from the host if we want to override + * the Configuration File in flash. + */ + + ret = adap_init0_config(adap, reset); + if (ret == -ENOENT) { + dev_info(adap->pdev_dev, + "No Configuration File present " + "on adapter. Using hard-wired " + "configuration parameters.\n"); + ret = adap_init0_no_config(adap, reset); + } + } + } + if (ret < 0) { + dev_err(adap->pdev_dev, + "could not initialize adapter, error %d\n", + -ret); + goto bye; + } + } + + /* + * If we're living with non-hard-coded parameters (either from a + * Firmware Configuration File or values programmed by a different PF + * Driver), give the SGE code a chance to pull in anything that it + * needs ... Note that this must be called after we retrieve our VPD + * parameters in order to know how to convert core ticks to seconds. + */ + if (adap->flags & USING_SOFT_PARAMS) { + ret = t4_sge_init(adap); + if (ret < 0) + goto bye; + } + + /* + * Grab some of our basic fundamental operating parameters. + */ +#define FW_PARAM_DEV(param) \ + (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \ + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param)) + #define FW_PARAM_PFVF(param) \ - (FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \ - FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param) | \ - FW_PARAMS_PARAM_Y(adap->fn)) + FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \ + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param)| \ + FW_PARAMS_PARAM_Y(0) | \ + FW_PARAMS_PARAM_Z(0) - params[0] = FW_PARAM_DEV(PORTVEC); + params[0] = FW_PARAM_PFVF(EQ_START); params[1] = FW_PARAM_PFVF(L2T_START); params[2] = FW_PARAM_PFVF(L2T_END); params[3] = FW_PARAM_PFVF(FILTER_START); params[4] = FW_PARAM_PFVF(FILTER_END); params[5] = FW_PARAM_PFVF(IQFLINT_START); - params[6] = FW_PARAM_PFVF(EQ_START); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 7, params, val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, params, val); if (ret < 0) goto bye; - port_vec = val[0]; + adap->sge.egr_start = val[0]; + adap->l2t_start = val[1]; + adap->l2t_end = val[2]; adap->tids.ftid_base = val[3]; adap->tids.nftids = val[4] - val[3] + 1; adap->sge.ingr_start = val[5]; - adap->sge.egr_start = val[6]; - if (c.ofldcaps) { + /* query params related to active filter region */ + params[0] = FW_PARAM_PFVF(ACTIVE_FILTER_START); + params[1] = FW_PARAM_PFVF(ACTIVE_FILTER_END); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, params, val); + /* If Active filter size is set we enable establishing + * offload connection through firmware work request + */ + if ((val[0] != val[1]) && (ret >= 0)) { + adap->flags |= FW_OFLD_CONN; + adap->tids.aftid_base = val[0]; + adap->tids.aftid_end = val[1]; + } + +#ifdef CONFIG_CHELSIO_T4_OFFLOAD + /* + * Get device capabilities so we can determine what resources we need + * to manage. + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | FW_CMD_READ); + caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + if (ret < 0) + goto bye; + + if (caps_cmd.ofldcaps) { /* query offload-related parameters */ params[0] = FW_PARAM_DEV(NTID); params[1] = FW_PARAM_PFVF(SERVER_START); @@ -3235,28 +3956,55 @@ static int adap_init0(struct adapter *adap) params[3] = FW_PARAM_PFVF(TDDP_START); params[4] = FW_PARAM_PFVF(TDDP_END); params[5] = FW_PARAM_DEV(FLOWC_BUFFIFO_SZ); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, - val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, + params, val); if (ret < 0) goto bye; adap->tids.ntids = val[0]; adap->tids.natids = min(adap->tids.ntids / 2, MAX_ATIDS); adap->tids.stid_base = val[1]; adap->tids.nstids = val[2] - val[1] + 1; + /* + * Setup server filter region. Divide the availble filter + * region into two parts. Regular filters get 1/3rd and server + * filters get 2/3rd part. This is only enabled if workarond + * path is enabled. + * 1. For regular filters. + * 2. Server filter: This are special filters which are used + * to redirect SYN packets to offload queue. + */ + if (adap->flags & FW_OFLD_CONN && !is_bypass(adap)) { + adap->tids.sftid_base = adap->tids.ftid_base + + DIV_ROUND_UP(adap->tids.nftids, 3); + adap->tids.nsftids = adap->tids.nftids - + DIV_ROUND_UP(adap->tids.nftids, 3); + adap->tids.nftids = adap->tids.sftid_base - + adap->tids.ftid_base; + } adap->vres.ddp.start = val[3]; adap->vres.ddp.size = val[4] - val[3] + 1; adap->params.ofldq_wr_cred = val[5]; + + params[0] = FW_PARAM_PFVF(ETHOFLD_START); + params[1] = FW_PARAM_PFVF(ETHOFLD_END); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, + params, val); + if ((val[0] != val[1]) && (ret >= 0)) { + adap->tids.uotid_base = val[0]; + adap->tids.nuotids = val[1] - val[0] + 1; + } + adap->params.offload = 1; } - if (c.rdmacaps) { + if (caps_cmd.rdmacaps) { params[0] = FW_PARAM_PFVF(STAG_START); params[1] = FW_PARAM_PFVF(STAG_END); params[2] = FW_PARAM_PFVF(RQ_START); params[3] = FW_PARAM_PFVF(RQ_END); params[4] = FW_PARAM_PFVF(PBL_START); params[5] = FW_PARAM_PFVF(PBL_END); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, - val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, + params, val); if (ret < 0) goto bye; adap->vres.stag.start = val[0]; @@ -3272,8 +4020,7 @@ static int adap_init0(struct adapter *adap) params[3] = FW_PARAM_PFVF(CQ_END); params[4] = FW_PARAM_PFVF(OCQ_START); params[5] = FW_PARAM_PFVF(OCQ_END); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, - val); + ret = t4_query_params(adap, 0, 0, 0, 6, params, val); if (ret < 0) goto bye; adap->vres.qp.start = val[0]; @@ -3283,11 +4030,11 @@ static int adap_init0(struct adapter *adap) adap->vres.ocq.start = val[4]; adap->vres.ocq.size = val[5] - val[4] + 1; } - if (c.iscsicaps) { + if (caps_cmd.iscsicaps) { params[0] = FW_PARAM_PFVF(ISCSI_START); params[1] = FW_PARAM_PFVF(ISCSI_END); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 2, params, - val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, + params, val); if (ret < 0) goto bye; adap->vres.iscsi.start = val[0]; @@ -3295,63 +4042,33 @@ static int adap_init0(struct adapter *adap) } #undef FW_PARAM_PFVF #undef FW_PARAM_DEV +#endif /* CONFIG_CHELSIO_T4_OFFLOAD */ - adap->params.nports = hweight32(port_vec); - adap->params.portvec = port_vec; - adap->flags |= FW_OK; - - /* These are finalized by FW initialization, load their values now */ + /* + * These are finalized by FW initialization, load their values now. + */ v = t4_read_reg(adap, TP_TIMER_RESOLUTION); adap->params.tp.tre = TIMERRESOLUTION_GET(v); + adap->params.tp.dack_re = DELAYEDACKRESOLUTION_GET(v); t4_read_mtu_tbl(adap, adap->params.mtus, NULL); t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd, adap->params.b_wnd); -#ifdef CONFIG_PCI_IOV - /* - * Provision resource limits for Virtual Functions. We currently - * grant them all the same static resource limits except for the Port - * Access Rights Mask which we're assigning based on the PF. All of - * the static provisioning stuff for both the PF and VF really needs - * to be managed in a persistent manner for each device which the - * firmware controls. - */ - { - int pf, vf; - - for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) { - if (num_vf[pf] <= 0) - continue; + /* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */ + for (j = 0; j < NCHAN; j++) + adap->params.tp.tx_modq[j] = j; - /* VF numbering starts at 1! */ - for (vf = 1; vf <= num_vf[pf]; vf++) { - ret = t4_cfg_pfvf(adap, adap->fn, pf, vf, - VFRES_NEQ, VFRES_NETHCTRL, - VFRES_NIQFLINT, VFRES_NIQ, - VFRES_TC, VFRES_NVI, - FW_PFVF_CMD_CMASK_MASK, - pfvfres_pmask(adap, pf, vf), - VFRES_NEXACTF, - VFRES_R_CAPS, VFRES_WX_CAPS); - if (ret < 0) - dev_warn(adap->pdev_dev, "failed to " - "provision pf/vf=%d/%d; " - "err=%d\n", pf, vf, ret); - } - } - } -#endif - - setup_memwin(adap); + adap->flags |= FW_OK; return 0; /* - * If a command timed out or failed with EIO FW does not operate within - * its spec or something catastrophic happened to HW/FW, stop issuing - * commands. + * Something bad happened. If a command timed out or failed with EIO + * FW does not operate within its spec or something catastrophic + * happened to HW/FW, stop issuing commands. */ -bye: if (ret != -ETIMEDOUT && ret != -EIO) - t4_fw_bye(adap, adap->fn); +bye: + if (ret != -ETIMEDOUT && ret != -EIO) + t4_fw_bye(adap, adap->mbox); return ret; } @@ -3806,7 +4523,9 @@ static int __devinit init_one(struct pci_dev *pdev, err = t4_prep_adapter(adapter); if (err) goto out_unmap_bar; + setup_memwin(adapter); err = adap_init0(adapter); + setup_memwin_rdma(adapter); if (err) goto out_unmap_bar; @@ -3948,8 +4667,11 @@ static void __devexit remove_one(struct pci_dev *pdev) { struct adapter *adapter = pci_get_drvdata(pdev); +#ifdef CONFIG_PCI_IOV pci_disable_sriov(pdev); +#endif + if (adapter) { int i; diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h index d79980c..1b899fe 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h @@ -100,6 +100,8 @@ struct tid_info { unsigned int nftids; unsigned int ftid_base; + unsigned int aftid_base; + unsigned int aftid_end; spinlock_t atid_lock ____cacheline_aligned_in_smp; union aopen_entry *afree; diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index d49933e..3ecc087 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -68,9 +68,6 @@ */ #define RX_PKT_SKB_LEN 512 -/* Ethernet header padding prepended to RX_PKTs */ -#define RX_PKT_PAD 2 - /* * Max number of Tx descriptors we clean up at a time. Should be modest as * freeing skbs isn't cheap and it happens while holding locks. We just need @@ -137,13 +134,6 @@ */ #define MAX_CTRL_WR_LEN SGE_MAX_WR_LEN -enum { - /* packet alignment in FL buffers */ - FL_ALIGN = L1_CACHE_BYTES < 32 ? 32 : L1_CACHE_BYTES, - /* egress status entry size */ - STAT_LEN = L1_CACHE_BYTES > 64 ? 128 : 64 -}; - struct tx_sw_desc { /* SW state per Tx descriptor */ struct sk_buff *skb; struct ulptx_sgl *sgl; @@ -155,16 +145,57 @@ struct rx_sw_desc { /* SW state per Rx descriptor */ }; /* - * The low bits of rx_sw_desc.dma_addr have special meaning. + * Rx buffer sizes for "useskbs" Free List buffers (one ingress packet pe skb + * buffer). We currently only support two sizes for 1500- and 9000-byte MTUs. + * We could easily support more but there doesn't seem to be much need for + * that ... + */ +#define FL_MTU_SMALL 1500 +#define FL_MTU_LARGE 9000 + +static inline unsigned int fl_mtu_bufsize(struct adapter *adapter, + unsigned int mtu) +{ + struct sge *s = &adapter->sge; + + return ALIGN(s->pktshift + ETH_HLEN + VLAN_HLEN + mtu, s->fl_align); +} + +#define FL_MTU_SMALL_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_SMALL) +#define FL_MTU_LARGE_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_LARGE) + +/* + * Bits 0..3 of rx_sw_desc.dma_addr have special meaning. The hardware uses + * these to specify the buffer size as an index into the SGE Free List Buffer + * Size register array. We also use bit 4, when the buffer has been unmapped + * for DMA, but this is of course never sent to the hardware and is only used + * to prevent double unmappings. All of the above requires that the Free List + * Buffers which we allocate have the bottom 5 bits free (0) -- i.e. are + * 32-byte or or a power of 2 greater in alignment. Since the SGE's minimal + * Free List Buffer alignment is 32 bytes, this works out for us ... */ enum { - RX_LARGE_BUF = 1 << 0, /* buffer is larger than PAGE_SIZE */ - RX_UNMAPPED_BUF = 1 << 1, /* buffer is not mapped */ + RX_BUF_FLAGS = 0x1f, /* bottom five bits are special */ + RX_BUF_SIZE = 0x0f, /* bottom three bits are for buf sizes */ + RX_UNMAPPED_BUF = 0x10, /* buffer is not mapped */ + + /* + * XXX We shouldn't depend on being able to use these indices. + * XXX Especially when some other Master PF has initialized the + * XXX adapter or we use the Firmware Configuration File. We + * XXX should really search through the Host Buffer Size register + * XXX array for the appropriately sized buffer indices. + */ + RX_SMALL_PG_BUF = 0x0, /* small (PAGE_SIZE) page buffer */ + RX_LARGE_PG_BUF = 0x1, /* buffer large (FL_PG_ORDER) page buffer */ + + RX_SMALL_MTU_BUF = 0x2, /* small MTU buffer */ + RX_LARGE_MTU_BUF = 0x3, /* large MTU buffer */ }; static inline dma_addr_t get_buf_addr(const struct rx_sw_desc *d) { - return d->dma_addr & ~(dma_addr_t)(RX_LARGE_BUF | RX_UNMAPPED_BUF); + return d->dma_addr & ~(dma_addr_t)RX_BUF_FLAGS; } static inline bool is_buf_mapped(const struct rx_sw_desc *d) @@ -392,14 +423,35 @@ static inline void reclaim_completed_tx(struct adapter *adap, struct sge_txq *q, } } -static inline int get_buf_size(const struct rx_sw_desc *d) +static inline int get_buf_size(struct adapter *adapter, + const struct rx_sw_desc *d) { -#if FL_PG_ORDER > 0 - return (d->dma_addr & RX_LARGE_BUF) ? (PAGE_SIZE << FL_PG_ORDER) : - PAGE_SIZE; -#else - return PAGE_SIZE; -#endif + struct sge *s = &adapter->sge; + unsigned int rx_buf_size_idx = d->dma_addr & RX_BUF_SIZE; + int buf_size; + + switch (rx_buf_size_idx) { + case RX_SMALL_PG_BUF: + buf_size = PAGE_SIZE; + break; + + case RX_LARGE_PG_BUF: + buf_size = PAGE_SIZE << s->fl_pg_order; + break; + + case RX_SMALL_MTU_BUF: + buf_size = FL_MTU_SMALL_BUFSIZE(adapter); + break; + + case RX_LARGE_MTU_BUF: + buf_size = FL_MTU_LARGE_BUFSIZE(adapter); + break; + + default: + BUG_ON(1); + } + + return buf_size; } /** @@ -418,7 +470,8 @@ static void free_rx_bufs(struct adapter *adap, struct sge_fl *q, int n) if (is_buf_mapped(d)) dma_unmap_page(adap->pdev_dev, get_buf_addr(d), - get_buf_size(d), PCI_DMA_FROMDEVICE); + get_buf_size(adap, d), + PCI_DMA_FROMDEVICE); put_page(d->page); d->page = NULL; if (++q->cidx == q->size) @@ -444,7 +497,7 @@ static void unmap_rx_buf(struct adapter *adap, struct sge_fl *q) if (is_buf_mapped(d)) dma_unmap_page(adap->pdev_dev, get_buf_addr(d), - get_buf_size(d), PCI_DMA_FROMDEVICE); + get_buf_size(adap, d), PCI_DMA_FROMDEVICE); d->page = NULL; if (++q->cidx == q->size) q->cidx = 0; @@ -485,6 +538,7 @@ static inline void set_rx_sw_desc(struct rx_sw_desc *sd, struct page *pg, static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp) { + struct sge *s = &adap->sge; struct page *pg; dma_addr_t mapping; unsigned int cred = q->avail; @@ -493,25 +547,27 @@ static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp |= __GFP_NOWARN | __GFP_COLD; -#if FL_PG_ORDER > 0 + if (s->fl_pg_order == 0) + goto alloc_small_pages; + /* * Prefer large buffers */ while (n) { - pg = alloc_pages(gfp | __GFP_COMP, FL_PG_ORDER); + pg = alloc_pages(gfp | __GFP_COMP, s->fl_pg_order); if (unlikely(!pg)) { q->large_alloc_failed++; break; /* fall back to single pages */ } mapping = dma_map_page(adap->pdev_dev, pg, 0, - PAGE_SIZE << FL_PG_ORDER, + PAGE_SIZE << s->fl_pg_order, PCI_DMA_FROMDEVICE); if (unlikely(dma_mapping_error(adap->pdev_dev, mapping))) { - __free_pages(pg, FL_PG_ORDER); + __free_pages(pg, s->fl_pg_order); goto out; /* do not try small pages for this error */ } - mapping |= RX_LARGE_BUF; + mapping |= RX_LARGE_PG_BUF; *d++ = cpu_to_be64(mapping); set_rx_sw_desc(sd, pg, mapping); @@ -525,8 +581,8 @@ static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n, } n--; } -#endif +alloc_small_pages: while (n--) { pg = __skb_alloc_page(gfp, NULL); if (unlikely(!pg)) { @@ -769,8 +825,8 @@ static inline void ring_tx_db(struct adapter *adap, struct sge_txq *q, int n) wmb(); /* write descriptors before telling HW */ spin_lock(&q->db_lock); if (!q->db_disabled) { - t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL), - V_QID(q->cntxt_id) | V_PIDX(n)); + t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL), + QID(q->cntxt_id) | PIDX(n)); } q->db_pidx = q->pidx; spin_unlock(&q->db_lock); @@ -1519,6 +1575,8 @@ static noinline int handle_trace_pkt(struct adapter *adap, static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl, const struct cpl_rx_pkt *pkt) { + struct adapter *adapter = rxq->rspq.adap; + struct sge *s = &adapter->sge; int ret; struct sk_buff *skb; @@ -1529,8 +1587,8 @@ static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl, return; } - copy_frags(skb, gl, RX_PKT_PAD); - skb->len = gl->tot_len - RX_PKT_PAD; + copy_frags(skb, gl, s->pktshift); + skb->len = gl->tot_len - s->pktshift; skb->data_len = skb->len; skb->truesize += skb->data_len; skb->ip_summed = CHECKSUM_UNNECESSARY; @@ -1566,6 +1624,7 @@ int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp, struct sk_buff *skb; const struct cpl_rx_pkt *pkt; struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq); + struct sge *s = &q->adap->sge; if (unlikely(*(u8 *)rsp == CPL_TRACE_PKT)) return handle_trace_pkt(q->adap, si); @@ -1585,7 +1644,7 @@ int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp, return 0; } - __skb_pull(skb, RX_PKT_PAD); /* remove ethernet header padding */ + __skb_pull(skb, s->pktshift); /* remove ethernet header padding */ skb->protocol = eth_type_trans(skb, q->netdev); skb_record_rx_queue(skb, q->idx); if (skb->dev->features & NETIF_F_RXHASH) @@ -1696,6 +1755,8 @@ static int process_responses(struct sge_rspq *q, int budget) int budget_left = budget; const struct rsp_ctrl *rc; struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq); + struct adapter *adapter = q->adap; + struct sge *s = &adapter->sge; while (likely(budget_left)) { rc = (void *)q->cur_desc + (q->iqe_len - sizeof(*rc)); @@ -1722,7 +1783,7 @@ static int process_responses(struct sge_rspq *q, int budget) /* gather packet fragments */ for (frags = 0, fp = si.frags; ; frags++, fp++) { rsd = &rxq->fl.sdesc[rxq->fl.cidx]; - bufsz = get_buf_size(rsd); + bufsz = get_buf_size(adapter, rsd); fp->page = rsd->page; fp->offset = q->offset; fp->size = min(bufsz, len); @@ -1747,7 +1808,7 @@ static int process_responses(struct sge_rspq *q, int budget) si.nfrags = frags + 1; ret = q->handler(q, q->cur_desc, &si); if (likely(ret == 0)) - q->offset += ALIGN(fp->size, FL_ALIGN); + q->offset += ALIGN(fp->size, s->fl_align); else restore_rx_bufs(&si, &rxq->fl, frags); } else if (likely(rsp_type == RSP_TYPE_CPL)) { @@ -1983,6 +2044,7 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq, { int ret, flsz = 0; struct fw_iq_cmd c; + struct sge *s = &adap->sge; struct port_info *pi = netdev_priv(dev); /* Size needs to be multiple of 16, including status entry. */ @@ -2015,11 +2077,11 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq, fl->size = roundup(fl->size, 8); fl->desc = alloc_ring(adap->pdev_dev, fl->size, sizeof(__be64), sizeof(struct rx_sw_desc), &fl->addr, - &fl->sdesc, STAT_LEN, NUMA_NO_NODE); + &fl->sdesc, s->stat_len, NUMA_NO_NODE); if (!fl->desc) goto fl_nomem; - flsz = fl->size / 8 + STAT_LEN / sizeof(struct tx_desc); + flsz = fl->size / 8 + s->stat_len / sizeof(struct tx_desc); c.iqns_to_fl0congen = htonl(FW_IQ_CMD_FL0PACKEN | FW_IQ_CMD_FL0FETCHRO(1) | FW_IQ_CMD_FL0DATARO(1) | @@ -2096,14 +2158,15 @@ int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq, { int ret, nentries; struct fw_eq_eth_cmd c; + struct sge *s = &adap->sge; struct port_info *pi = netdev_priv(dev); /* Add status entries */ - nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc); + nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc); txq->q.desc = alloc_ring(adap->pdev_dev, txq->q.size, sizeof(struct tx_desc), sizeof(struct tx_sw_desc), - &txq->q.phys_addr, &txq->q.sdesc, STAT_LEN, + &txq->q.phys_addr, &txq->q.sdesc, s->stat_len, netdev_queue_numa_node_read(netdevq)); if (!txq->q.desc) return -ENOMEM; @@ -2149,10 +2212,11 @@ int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq, { int ret, nentries; struct fw_eq_ctrl_cmd c; + struct sge *s = &adap->sge; struct port_info *pi = netdev_priv(dev); /* Add status entries */ - nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc); + nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc); txq->q.desc = alloc_ring(adap->pdev_dev, nentries, sizeof(struct tx_desc), 0, &txq->q.phys_addr, @@ -2200,14 +2264,15 @@ int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq, { int ret, nentries; struct fw_eq_ofld_cmd c; + struct sge *s = &adap->sge; struct port_info *pi = netdev_priv(dev); /* Add status entries */ - nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc); + nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc); txq->q.desc = alloc_ring(adap->pdev_dev, txq->q.size, sizeof(struct tx_desc), sizeof(struct tx_sw_desc), - &txq->q.phys_addr, &txq->q.sdesc, STAT_LEN, + &txq->q.phys_addr, &txq->q.sdesc, s->stat_len, NUMA_NO_NODE); if (!txq->q.desc) return -ENOMEM; @@ -2251,8 +2316,10 @@ int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq, static void free_txq(struct adapter *adap, struct sge_txq *q) { + struct sge *s = &adap->sge; + dma_free_coherent(adap->pdev_dev, - q->size * sizeof(struct tx_desc) + STAT_LEN, + q->size * sizeof(struct tx_desc) + s->stat_len, q->desc, q->phys_addr); q->cntxt_id = 0; q->sdesc = NULL; @@ -2262,6 +2329,7 @@ static void free_txq(struct adapter *adap, struct sge_txq *q) static void free_rspq_fl(struct adapter *adap, struct sge_rspq *rq, struct sge_fl *fl) { + struct sge *s = &adap->sge; unsigned int fl_id = fl ? fl->cntxt_id : 0xffff; adap->sge.ingr_map[rq->cntxt_id - adap->sge.ingr_start] = NULL; @@ -2276,7 +2344,7 @@ static void free_rspq_fl(struct adapter *adap, struct sge_rspq *rq, if (fl) { free_rx_bufs(adap, fl, fl->avail); - dma_free_coherent(adap->pdev_dev, fl->size * 8 + STAT_LEN, + dma_free_coherent(adap->pdev_dev, fl->size * 8 + s->stat_len, fl->desc, fl->addr); kfree(fl->sdesc); fl->sdesc = NULL; @@ -2408,18 +2476,112 @@ void t4_sge_stop(struct adapter *adap) * Performs SGE initialization needed every time after a chip reset. * We do not initialize any of the queues here, instead the driver * top-level must request them individually. + * + * Called in two different modes: + * + * 1. Perform actual hardware initialization and record hard-coded + * parameters which were used. This gets used when we're the + * Master PF and the Firmware Configuration File support didn't + * work for some reason. + * + * 2. We're not the Master PF or initialization was performed with + * a Firmware Configuration File. In this case we need to grab + * any of the SGE operating parameters that we need to have in + * order to do our job and make sure we can live with them ... */ -void t4_sge_init(struct adapter *adap) + +static int t4_sge_init_soft(struct adapter *adap) { - unsigned int i, v; struct sge *s = &adap->sge; - unsigned int fl_align_log = ilog2(FL_ALIGN); + u32 fl_small_pg, fl_large_pg, fl_small_mtu, fl_large_mtu; + u32 timer_value_0_and_1, timer_value_2_and_3, timer_value_4_and_5; + u32 ingress_rx_threshold; - t4_set_reg_field(adap, SGE_CONTROL, PKTSHIFT_MASK | - INGPADBOUNDARY_MASK | EGRSTATUSPAGESIZE, - INGPADBOUNDARY(fl_align_log - 5) | PKTSHIFT(2) | - RXPKTCPLMODE | - (STAT_LEN == 128 ? EGRSTATUSPAGESIZE : 0)); + /* + * Verify that CPL messages are going to the Ingress Queue for + * process_responses() and that only packet data is going to the + * Free Lists. + */ + if ((t4_read_reg(adap, SGE_CONTROL) & RXPKTCPLMODE_MASK) != + RXPKTCPLMODE(X_RXPKTCPLMODE_SPLIT)) { + dev_err(adap->pdev_dev, "bad SGE CPL MODE\n"); + return -EINVAL; + } + + /* + * Validate the Host Buffer Register Array indices that we want to + * use ... + * + * XXX Note that we should really read through the Host Buffer Size + * XXX register array and find the indices of the Buffer Sizes which + * XXX meet our needs! + */ + #define READ_FL_BUF(x) \ + t4_read_reg(adap, SGE_FL_BUFFER_SIZE0+(x)*sizeof(u32)) + + fl_small_pg = READ_FL_BUF(RX_SMALL_PG_BUF); + fl_large_pg = READ_FL_BUF(RX_LARGE_PG_BUF); + fl_small_mtu = READ_FL_BUF(RX_SMALL_MTU_BUF); + fl_large_mtu = READ_FL_BUF(RX_LARGE_MTU_BUF); + + #undef READ_FL_BUF + + if (fl_small_pg != PAGE_SIZE || + (fl_large_pg != 0 && (fl_large_pg <= fl_small_pg || + (fl_large_pg & (fl_large_pg-1)) != 0))) { + dev_err(adap->pdev_dev, "bad SGE FL page buffer sizes [%d, %d]\n", + fl_small_pg, fl_large_pg); + return -EINVAL; + } + if (fl_large_pg) + s->fl_pg_order = ilog2(fl_large_pg) - PAGE_SHIFT; + + if (fl_small_mtu < FL_MTU_SMALL_BUFSIZE(adap) || + fl_large_mtu < FL_MTU_LARGE_BUFSIZE(adap)) { + dev_err(adap->pdev_dev, "bad SGE FL MTU sizes [%d, %d]\n", + fl_small_mtu, fl_large_mtu); + return -EINVAL; + } + + /* + * Retrieve our RX interrupt holdoff timer values and counter + * threshold values from the SGE parameters. + */ + timer_value_0_and_1 = t4_read_reg(adap, SGE_TIMER_VALUE_0_AND_1); + timer_value_2_and_3 = t4_read_reg(adap, SGE_TIMER_VALUE_2_AND_3); + timer_value_4_and_5 = t4_read_reg(adap, SGE_TIMER_VALUE_4_AND_5); + s->timer_val[0] = core_ticks_to_us(adap, + TIMERVALUE0_GET(timer_value_0_and_1)); + s->timer_val[1] = core_ticks_to_us(adap, + TIMERVALUE1_GET(timer_value_0_and_1)); + s->timer_val[2] = core_ticks_to_us(adap, + TIMERVALUE2_GET(timer_value_2_and_3)); + s->timer_val[3] = core_ticks_to_us(adap, + TIMERVALUE3_GET(timer_value_2_and_3)); + s->timer_val[4] = core_ticks_to_us(adap, + TIMERVALUE4_GET(timer_value_4_and_5)); + s->timer_val[5] = core_ticks_to_us(adap, + TIMERVALUE5_GET(timer_value_4_and_5)); + + ingress_rx_threshold = t4_read_reg(adap, SGE_INGRESS_RX_THRESHOLD); + s->counter_val[0] = THRESHOLD_0_GET(ingress_rx_threshold); + s->counter_val[1] = THRESHOLD_1_GET(ingress_rx_threshold); + s->counter_val[2] = THRESHOLD_2_GET(ingress_rx_threshold); + s->counter_val[3] = THRESHOLD_3_GET(ingress_rx_threshold); + + return 0; +} + +static int t4_sge_init_hard(struct adapter *adap) +{ + struct sge *s = &adap->sge; + + /* + * Set up our basic SGE mode to deliver CPL messages to our Ingress + * Queue and Packet Date to the Free List. + */ + t4_set_reg_field(adap, SGE_CONTROL, RXPKTCPLMODE_MASK, + RXPKTCPLMODE_MASK); /* * Set up to drop DOORBELL writes when the DOORBELL FIFO overflows @@ -2433,13 +2595,24 @@ void t4_sge_init(struct adapter *adap) t4_set_reg_field(adap, A_SGE_DOORBELL_CONTROL, F_ENABLE_DROP, F_ENABLE_DROP); - for (i = v = 0; i < 32; i += 4) - v |= (PAGE_SHIFT - 10) << i; - t4_write_reg(adap, SGE_HOST_PAGE_SIZE, v); - t4_write_reg(adap, SGE_FL_BUFFER_SIZE0, PAGE_SIZE); -#if FL_PG_ORDER > 0 - t4_write_reg(adap, SGE_FL_BUFFER_SIZE1, PAGE_SIZE << FL_PG_ORDER); -#endif + /* + * SGE_FL_BUFFER_SIZE0 (RX_SMALL_PG_BUF) is set up by + * t4_fixup_host_params(). + */ + s->fl_pg_order = FL_PG_ORDER; + if (s->fl_pg_order) + t4_write_reg(adap, + SGE_FL_BUFFER_SIZE0+RX_LARGE_PG_BUF*sizeof(u32), + PAGE_SIZE << FL_PG_ORDER); + t4_write_reg(adap, SGE_FL_BUFFER_SIZE0+RX_SMALL_MTU_BUF*sizeof(u32), + FL_MTU_SMALL_BUFSIZE(adap)); + t4_write_reg(adap, SGE_FL_BUFFER_SIZE0+RX_LARGE_MTU_BUF*sizeof(u32), + FL_MTU_LARGE_BUFSIZE(adap)); + + /* + * Note that the SGE Ingress Packet Count Interrupt Threshold and + * Timer Holdoff values must be supplied by our caller. + */ t4_write_reg(adap, SGE_INGRESS_RX_THRESHOLD, THRESHOLD_0(s->counter_val[0]) | THRESHOLD_1(s->counter_val[1]) | @@ -2449,14 +2622,54 @@ void t4_sge_init(struct adapter *adap) TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[0])) | TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[1]))); t4_write_reg(adap, SGE_TIMER_VALUE_2_AND_3, - TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[2])) | - TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[3]))); + TIMERVALUE2(us_to_core_ticks(adap, s->timer_val[2])) | + TIMERVALUE3(us_to_core_ticks(adap, s->timer_val[3]))); t4_write_reg(adap, SGE_TIMER_VALUE_4_AND_5, - TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[4])) | - TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[5]))); + TIMERVALUE4(us_to_core_ticks(adap, s->timer_val[4])) | + TIMERVALUE5(us_to_core_ticks(adap, s->timer_val[5]))); + + return 0; +} + +int t4_sge_init(struct adapter *adap) +{ + struct sge *s = &adap->sge; + u32 sge_control; + int ret; + + /* + * Ingress Padding Boundary and Egress Status Page Size are set up by + * t4_fixup_host_params(). + */ + sge_control = t4_read_reg(adap, SGE_CONTROL); + s->pktshift = PKTSHIFT_GET(sge_control); + s->stat_len = (sge_control & EGRSTATUSPAGESIZE_MASK) ? 128 : 64; + s->fl_align = 1 << (INGPADBOUNDARY_GET(sge_control) + + X_INGPADBOUNDARY_SHIFT); + + if (adap->flags & USING_SOFT_PARAMS) + ret = t4_sge_init_soft(adap); + else + ret = t4_sge_init_hard(adap); + if (ret < 0) + return ret; + + /* + * A FL with <= fl_starve_thres buffers is starving and a periodic + * timer will attempt to refill it. This needs to be larger than the + * SGE's Egress Congestion Threshold. If it isn't, then we can get + * stuck waiting for new packets while the SGE is waiting for us to + * give it more Free List entries. (Note that the SGE's Egress + * Congestion Threshold is in units of 2 Free List pointers.) + */ + s->fl_starve_thres + = EGRTHRESHOLD_GET(t4_read_reg(adap, SGE_CONM_CTRL))*2 + 1; + setup_timer(&s->rx_timer, sge_rx_timer_cb, (unsigned long)adap); setup_timer(&s->tx_timer, sge_tx_timer_cb, (unsigned long)adap); s->starve_thres = core_ticks_per_usec(adap) * 1000000; /* 1 s */ s->idma_state[0] = s->idma_state[1] = 0; spin_lock_init(&s->intrq_lock); + + return 0; } diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index af16013..35b81d8 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -120,6 +120,28 @@ static void t4_read_indirect(struct adapter *adap, unsigned int addr_reg, } } +/** + * t4_write_indirect - write indirectly addressed registers + * @adap: the adapter + * @addr_reg: register holding the indirect addresses + * @data_reg: register holding the value for the indirect registers + * @vals: values to write + * @nregs: how many indirect registers to write + * @start_idx: address of first indirect register to write + * + * Writes a sequential block of registers that are accessed indirectly + * through an address/data register pair. + */ +void t4_write_indirect(struct adapter *adap, unsigned int addr_reg, + unsigned int data_reg, const u32 *vals, + unsigned int nregs, unsigned int start_idx) +{ + while (nregs--) { + t4_write_reg(adap, addr_reg, start_idx++); + t4_write_reg(adap, data_reg, *vals++); + } +} + /* * Get the reply to a mailbox command and store it in @rpl in big-endian order. */ @@ -330,6 +352,143 @@ int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc) return 0; } +/* + * t4_mem_win_rw - read/write memory through PCIE memory window + * @adap: the adapter + * @addr: address of first byte requested + * @data: MEMWIN0_APERTURE bytes of data containing the requested address + * @dir: direction of transfer 1 => read, 0 => write + * + * Read/write MEMWIN0_APERTURE bytes of data from MC starting at a + * MEMWIN0_APERTURE-byte-aligned address that covers the requested + * address @addr. + */ +static int t4_mem_win_rw(struct adapter *adap, u32 addr, __be32 *data, int dir) +{ + int i; + + /* + * Setup offset into PCIE memory window. Address must be a + * MEMWIN0_APERTURE-byte-aligned address. (Read back MA register to + * ensure that changes propagate before we attempt to use the new + * values.) + */ + t4_write_reg(adap, PCIE_MEM_ACCESS_OFFSET, + addr & ~(MEMWIN0_APERTURE - 1)); + t4_read_reg(adap, PCIE_MEM_ACCESS_OFFSET); + + /* Collecting data 4 bytes at a time upto MEMWIN0_APERTURE */ + for (i = 0; i < MEMWIN0_APERTURE; i = i+0x4) { + if (dir) + *data++ = t4_read_reg(adap, (MEMWIN0_BASE + i)); + else + t4_write_reg(adap, (MEMWIN0_BASE + i), *data++); + } + + return 0; +} + +/** + * t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window + * @adap: the adapter + * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC + * @addr: address within indicated memory type + * @len: amount of memory to transfer + * @buf: host memory buffer + * @dir: direction of transfer 1 => read, 0 => write + * + * Reads/writes an [almost] arbitrary memory region in the firmware: the + * firmware memory address, length and host buffer must be aligned on + * 32-bit boudaries. The memory is transferred as a raw byte sequence + * from/to the firmware's memory. If this memory contains data + * structures which contain multi-byte integers, it's the callers + * responsibility to perform appropriate byte order conversions. + */ +static int t4_memory_rw(struct adapter *adap, int mtype, u32 addr, u32 len, + __be32 *buf, int dir) +{ + u32 pos, start, end, offset, memoffset; + int ret; + + /* + * Argument sanity checks ... + */ + if ((addr & 0x3) || (len & 0x3)) + return -EINVAL; + + /* + * Offset into the region of memory which is being accessed + * MEM_EDC0 = 0 + * MEM_EDC1 = 1 + * MEM_MC = 2 + */ + memoffset = (mtype * (5 * 1024 * 1024)); + + /* Determine the PCIE_MEM_ACCESS_OFFSET */ + addr = addr + memoffset; + + /* + * The underlaying EDC/MC read routines read MEMWIN0_APERTURE bytes + * at a time so we need to round down the start and round up the end. + * We'll start copying out of the first line at (addr - start) a word + * at a time. + */ + start = addr & ~(MEMWIN0_APERTURE-1); + end = (addr + len + MEMWIN0_APERTURE-1) & ~(MEMWIN0_APERTURE-1); + offset = (addr - start)/sizeof(__be32); + + for (pos = start; pos < end; pos += MEMWIN0_APERTURE, offset = 0) { + __be32 data[MEMWIN0_APERTURE/sizeof(__be32)]; + + /* + * If we're writing, copy the data from the caller's memory + * buffer + */ + if (!dir) { + /* + * If we're doing a partial write, then we need to do + * a read-modify-write ... + */ + if (offset || len < MEMWIN0_APERTURE) { + ret = t4_mem_win_rw(adap, pos, data, 1); + if (ret) + return ret; + } + while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) && + len > 0) { + data[offset++] = *buf++; + len -= sizeof(__be32); + } + } + + /* + * Transfer a block of memory and bail if there's an error. + */ + ret = t4_mem_win_rw(adap, pos, data, dir); + if (ret) + return ret; + + /* + * If we're reading, copy the data into the caller's memory + * buffer. + */ + if (dir) + while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) && + len > 0) { + *buf++ = data[offset++]; + len -= sizeof(__be32); + } + } + + return 0; +} + +int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len, + __be32 *buf) +{ + return t4_memory_rw(adap, mtype, addr, len, buf, 0); +} + #define EEPROM_STAT_ADDR 0x7bfc #define VPD_BASE 0 #define VPD_LEN 512 @@ -355,8 +514,9 @@ int t4_seeprom_wp(struct adapter *adapter, bool enable) * * Reads card parameters stored in VPD EEPROM. */ -static int get_vpd_params(struct adapter *adapter, struct vpd_params *p) +int get_vpd_params(struct adapter *adapter, struct vpd_params *p) { + u32 cclk_param, cclk_val; int i, ret; int ec, sn; u8 vpd[VPD_LEN], csum; @@ -418,6 +578,19 @@ static int get_vpd_params(struct adapter *adapter, struct vpd_params *p) i = pci_vpd_info_field_size(vpd + sn - PCI_VPD_INFO_FLD_HDR_SIZE); memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN)); strim(p->sn); + + /* + * Ask firmware for the Core Clock since it knows how to translate the + * Reference Clock ('V2') VPD field into a Core Clock value ... + */ + cclk_param = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CCLK)); + ret = t4_query_params(adapter, adapter->mbox, 0, 0, + 1, &cclk_param, &cclk_val); + if (ret) + return ret; + p->cclk = cclk_val; + return 0; } @@ -718,6 +891,77 @@ static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end) } /** + * t4_flash_cfg_addr - return the address of the flash configuration file + * @adapter: the adapter + * + * Return the address within the flash where the Firmware Configuration + * File is stored. + */ +unsigned int t4_flash_cfg_addr(struct adapter *adapter) +{ + if (adapter->params.sf_size == 0x100000) + return FLASH_FPGA_CFG_START; + else + return FLASH_CFG_START; +} + +/** + * t4_load_cfg - download config file + * @adap: the adapter + * @cfg_data: the cfg text file to write + * @size: text file size + * + * Write the supplied config text file to the card's serial flash. + */ +int t4_load_cfg(struct adapter *adap, const u8 *cfg_data, unsigned int size) +{ + int ret, i, n; + unsigned int addr; + unsigned int flash_cfg_start_sec; + unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec; + + addr = t4_flash_cfg_addr(adap); + flash_cfg_start_sec = addr / SF_SEC_SIZE; + + if (size > FLASH_CFG_MAX_SIZE) { + dev_err(adap->pdev_dev, "cfg file too large, max is %u bytes\n", + FLASH_CFG_MAX_SIZE); + return -EFBIG; + } + + i = DIV_ROUND_UP(FLASH_CFG_MAX_SIZE, /* # of sectors spanned */ + sf_sec_size); + ret = t4_flash_erase_sectors(adap, flash_cfg_start_sec, + flash_cfg_start_sec + i - 1); + /* + * If size == 0 then we're simply erasing the FLASH sectors associated + * with the on-adapter Firmware Configuration File. + */ + if (ret || size == 0) + goto out; + + /* this will write to the flash up to SF_PAGE_SIZE at a time */ + for (i = 0; i < size; i += SF_PAGE_SIZE) { + if ((size - i) < SF_PAGE_SIZE) + n = size - i; + else + n = SF_PAGE_SIZE; + ret = t4_write_flash(adap, addr, n, cfg_data); + if (ret) + goto out; + + addr += SF_PAGE_SIZE; + cfg_data += SF_PAGE_SIZE; + } + +out: + if (ret) + dev_err(adap->pdev_dev, "config file %s failed %d\n", + (size == 0 ? "clear" : "download"), ret); + return ret; +} + +/** * t4_load_fw - download firmware * @adap: the adapter * @fw_data: the firmware image to write @@ -1018,9 +1262,9 @@ static void sge_intr_handler(struct adapter *adapter) { ERR_INVALID_CIDX_INC, "SGE GTS CIDX increment too large", -1, 0 }, { ERR_CPL_OPCODE_0, "SGE received 0-length CPL", -1, 0 }, - { F_DBFIFO_LP_INT, NULL, -1, 0, t4_db_full }, - { F_DBFIFO_HP_INT, NULL, -1, 0, t4_db_full }, - { F_ERR_DROPPED_DB, NULL, -1, 0, t4_db_dropped }, + { DBFIFO_LP_INT, NULL, -1, 0, t4_db_full }, + { DBFIFO_HP_INT, NULL, -1, 0, t4_db_full }, + { ERR_DROPPED_DB, NULL, -1, 0, t4_db_dropped }, { ERR_DATA_CPL_ON_HIGH_QID1 | ERR_DATA_CPL_ON_HIGH_QID0, "SGE IQID > 1023 received CPL for FL", -1, 0 }, { ERR_BAD_DB_PIDX3, "SGE DBP 3 pidx increment too large", -1, @@ -1520,7 +1764,7 @@ void t4_intr_enable(struct adapter *adapter) ERR_BAD_DB_PIDX2 | ERR_BAD_DB_PIDX1 | ERR_BAD_DB_PIDX0 | ERR_ING_CTXT_PRIO | ERR_EGR_CTXT_PRIO | INGRESS_SIZE_ERR | - F_DBFIFO_HP_INT | F_DBFIFO_LP_INT | + DBFIFO_HP_INT | DBFIFO_LP_INT | EGRESS_SIZE_ERR); t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE), PF_INTR_MASK); t4_set_reg_field(adapter, PL_INT_MAP0, 0, 1 << pf); @@ -1717,6 +1961,23 @@ void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log) } /** + * t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register + * @adap: the adapter + * @addr: the indirect TP register address + * @mask: specifies the field within the register to modify + * @val: new value for the field + * + * Sets a field of an indirect TP register to the given value. + */ +void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr, + unsigned int mask, unsigned int val) +{ + t4_write_reg(adap, TP_PIO_ADDR, addr); + val |= t4_read_reg(adap, TP_PIO_DATA) & ~mask; + t4_write_reg(adap, TP_PIO_DATA, val); +} + +/** * init_cong_ctrl - initialize congestion control parameters * @a: the alpha values for congestion control * @b: the beta values for congestion control @@ -2000,9 +2261,9 @@ int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox, struct fw_ldst_cmd c; memset(&c, 0, sizeof(c)); - c.op_to_addrspace = htonl(V_FW_CMD_OP(FW_LDST_CMD) | F_FW_CMD_REQUEST | - F_FW_CMD_WRITE | - V_FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FIRMWARE)); + c.op_to_addrspace = htonl(FW_CMD_OP(FW_LDST_CMD) | FW_CMD_REQUEST | + FW_CMD_WRITE | + FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FIRMWARE)); c.cycles_to_len16 = htonl(FW_LEN16(c)); c.u.addrval.addr = htonl(addr); c.u.addrval.val = htonl(val); @@ -2033,8 +2294,8 @@ int t4_mem_win_read_len(struct adapter *adap, u32 addr, __be32 *data, int len) if ((addr & 3) || (len + off) > MEMWIN0_APERTURE) return -EINVAL; - t4_write_reg(adap, A_PCIE_MEM_ACCESS_OFFSET, addr & ~15); - t4_read_reg(adap, A_PCIE_MEM_ACCESS_OFFSET); + t4_write_reg(adap, PCIE_MEM_ACCESS_OFFSET, addr & ~15); + t4_read_reg(adap, PCIE_MEM_ACCESS_OFFSET); for (i = 0; i < len; i += 4) *data++ = t4_read_reg(adap, (MEMWIN0_BASE + off + i)); @@ -2102,39 +2363,129 @@ int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, } /** - * t4_fw_hello - establish communication with FW - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @evt_mbox: mailbox to receive async FW events - * @master: specifies the caller's willingness to be the device master - * @state: returns the current device state + * t4_fw_hello - establish communication with FW + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @evt_mbox: mailbox to receive async FW events + * @master: specifies the caller's willingness to be the device master + * @state: returns the current device state (if non-NULL) * - * Issues a command to establish communication with FW. + * Issues a command to establish communication with FW. Returns either + * an error (negative integer) or the mailbox of the Master PF. */ int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, enum dev_master master, enum dev_state *state) { int ret; struct fw_hello_cmd c; + u32 v; + unsigned int master_mbox; + int retries = FW_CMD_HELLO_RETRIES; +retry: + memset(&c, 0, sizeof(c)); INIT_CMD(c, HELLO, WRITE); c.err_to_mbasyncnot = htonl( FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) | FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) | - FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox : 0xff) | - FW_HELLO_CMD_MBASYNCNOT(evt_mbox)); + FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox : + FW_HELLO_CMD_MBMASTER_MASK) | + FW_HELLO_CMD_MBASYNCNOT(evt_mbox) | + FW_HELLO_CMD_STAGE(fw_hello_cmd_stage_os) | + FW_HELLO_CMD_CLEARINIT); + /* + * Issue the HELLO command to the firmware. If it's not successful + * but indicates that we got a "busy" or "timeout" condition, retry + * the HELLO until we exhaust our retry limit. + */ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); - if (ret == 0 && state) { - u32 v = ntohl(c.err_to_mbasyncnot); - if (v & FW_HELLO_CMD_INIT) - *state = DEV_STATE_INIT; - else if (v & FW_HELLO_CMD_ERR) + if (ret < 0) { + if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0) + goto retry; + return ret; + } + + v = ntohl(c.err_to_mbasyncnot); + master_mbox = FW_HELLO_CMD_MBMASTER_GET(v); + if (state) { + if (v & FW_HELLO_CMD_ERR) *state = DEV_STATE_ERR; + else if (v & FW_HELLO_CMD_INIT) + *state = DEV_STATE_INIT; else *state = DEV_STATE_UNINIT; } - return ret; + + /* + * If we're not the Master PF then we need to wait around for the + * Master PF Driver to finish setting up the adapter. + * + * Note that we also do this wait if we're a non-Master-capable PF and + * there is no current Master PF; a Master PF may show up momentarily + * and we wouldn't want to fail pointlessly. (This can happen when an + * OS loads lots of different drivers rapidly at the same time). In + * this case, the Master PF returned by the firmware will be + * FW_PCIE_FW_MASTER_MASK so the test below will work ... + */ + if ((v & (FW_HELLO_CMD_ERR|FW_HELLO_CMD_INIT)) == 0 && + master_mbox != mbox) { + int waiting = FW_CMD_HELLO_TIMEOUT; + + /* + * Wait for the firmware to either indicate an error or + * initialized state. If we see either of these we bail out + * and report the issue to the caller. If we exhaust the + * "hello timeout" and we haven't exhausted our retries, try + * again. Otherwise bail with a timeout error. + */ + for (;;) { + u32 pcie_fw; + + msleep(50); + waiting -= 50; + + /* + * If neither Error nor Initialialized are indicated + * by the firmware keep waiting till we exaust our + * timeout ... and then retry if we haven't exhausted + * our retries ... + */ + pcie_fw = t4_read_reg(adap, MA_PCIE_FW); + if (!(pcie_fw & (FW_PCIE_FW_ERR|FW_PCIE_FW_INIT))) { + if (waiting <= 0) { + if (retries-- > 0) + goto retry; + + return -ETIMEDOUT; + } + continue; + } + + /* + * We either have an Error or Initialized condition + * report errors preferentially. + */ + if (state) { + if (pcie_fw & FW_PCIE_FW_ERR) + *state = DEV_STATE_ERR; + else if (pcie_fw & FW_PCIE_FW_INIT) + *state = DEV_STATE_INIT; + } + + /* + * If we arrived before a Master PF was selected and + * there's not a valid Master PF, grab its identity + * for our caller. + */ + if (master_mbox == FW_PCIE_FW_MASTER_MASK && + (pcie_fw & FW_PCIE_FW_MASTER_VLD)) + master_mbox = FW_PCIE_FW_MASTER_GET(pcie_fw); + break; + } + } + + return master_mbox; } /** @@ -2186,6 +2537,334 @@ int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset) } /** + * t4_fw_halt - issue a reset/halt to FW and put uP into RESET + * @adap: the adapter + * @mbox: mailbox to use for the FW RESET command (if desired) + * @force: force uP into RESET even if FW RESET command fails + * + * Issues a RESET command to firmware (if desired) with a HALT indication + * and then puts the microprocessor into RESET state. The RESET command + * will only be issued if a legitimate mailbox is provided (mbox <= + * FW_PCIE_FW_MASTER_MASK). + * + * This is generally used in order for the host to safely manipulate the + * adapter without fear of conflicting with whatever the firmware might + * be doing. The only way out of this state is to RESTART the firmware + * ... + */ +int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force) +{ + int ret = 0; + + /* + * If a legitimate mailbox is provided, issue a RESET command + * with a HALT indication. + */ + if (mbox <= FW_PCIE_FW_MASTER_MASK) { + struct fw_reset_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, RESET, WRITE); + c.val = htonl(PIORST | PIORSTMODE); + c.halt_pkd = htonl(FW_RESET_CMD_HALT(1U)); + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); + } + + /* + * Normally we won't complete the operation if the firmware RESET + * command fails but if our caller insists we'll go ahead and put the + * uP into RESET. This can be useful if the firmware is hung or even + * missing ... We'll have to take the risk of putting the uP into + * RESET without the cooperation of firmware in that case. + * + * We also force the firmware's HALT flag to be on in case we bypassed + * the firmware RESET command above or we're dealing with old firmware + * which doesn't have the HALT capability. This will serve as a flag + * for the incoming firmware to know that it's coming out of a HALT + * rather than a RESET ... if it's new enough to understand that ... + */ + if (ret == 0 || force) { + t4_set_reg_field(adap, CIM_BOOT_CFG, UPCRST, UPCRST); + t4_set_reg_field(adap, PCIE_FW, FW_PCIE_FW_HALT, + FW_PCIE_FW_HALT); + } + + /* + * And we always return the result of the firmware RESET command + * even when we force the uP into RESET ... + */ + return ret; +} + +/** + * t4_fw_restart - restart the firmware by taking the uP out of RESET + * @adap: the adapter + * @reset: if we want to do a RESET to restart things + * + * Restart firmware previously halted by t4_fw_halt(). On successful + * return the previous PF Master remains as the new PF Master and there + * is no need to issue a new HELLO command, etc. + * + * We do this in two ways: + * + * 1. If we're dealing with newer firmware we'll simply want to take + * the chip's microprocessor out of RESET. This will cause the + * firmware to start up from its start vector. And then we'll loop + * until the firmware indicates it's started again (PCIE_FW.HALT + * reset to 0) or we timeout. + * + * 2. If we're dealing with older firmware then we'll need to RESET + * the chip since older firmware won't recognize the PCIE_FW.HALT + * flag and automatically RESET itself on startup. + */ +int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset) +{ + if (reset) { + /* + * Since we're directing the RESET instead of the firmware + * doing it automatically, we need to clear the PCIE_FW.HALT + * bit. + */ + t4_set_reg_field(adap, PCIE_FW, FW_PCIE_FW_HALT, 0); + + /* + * If we've been given a valid mailbox, first try to get the + * firmware to do the RESET. If that works, great and we can + * return success. Otherwise, if we haven't been given a + * valid mailbox or the RESET command failed, fall back to + * hitting the chip with a hammer. + */ + if (mbox <= FW_PCIE_FW_MASTER_MASK) { + t4_set_reg_field(adap, CIM_BOOT_CFG, UPCRST, 0); + msleep(100); + if (t4_fw_reset(adap, mbox, + PIORST | PIORSTMODE) == 0) + return 0; + } + + t4_write_reg(adap, PL_RST, PIORST | PIORSTMODE); + msleep(2000); + } else { + int ms; + + t4_set_reg_field(adap, CIM_BOOT_CFG, UPCRST, 0); + for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) { + if (!(t4_read_reg(adap, PCIE_FW) & FW_PCIE_FW_HALT)) + return 0; + msleep(100); + ms += 100; + } + return -ETIMEDOUT; + } + return 0; +} + +/** + * t4_fw_upgrade - perform all of the steps necessary to upgrade FW + * @adap: the adapter + * @mbox: mailbox to use for the FW RESET command (if desired) + * @fw_data: the firmware image to write + * @size: image size + * @force: force upgrade even if firmware doesn't cooperate + * + * Perform all of the steps necessary for upgrading an adapter's + * firmware image. Normally this requires the cooperation of the + * existing firmware in order to halt all existing activities + * but if an invalid mailbox token is passed in we skip that step + * (though we'll still put the adapter microprocessor into RESET in + * that case). + * + * On successful return the new firmware will have been loaded and + * the adapter will have been fully RESET losing all previous setup + * state. On unsuccessful return the adapter may be completely hosed ... + * positive errno indicates that the adapter is ~probably~ intact, a + * negative errno indicates that things are looking bad ... + */ +int t4_fw_upgrade(struct adapter *adap, unsigned int mbox, + const u8 *fw_data, unsigned int size, int force) +{ + const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data; + int reset, ret; + + ret = t4_fw_halt(adap, mbox, force); + if (ret < 0 && !force) + return ret; + + ret = t4_load_fw(adap, fw_data, size); + if (ret < 0) + return ret; + + /* + * Older versions of the firmware don't understand the new + * PCIE_FW.HALT flag and so won't know to perform a RESET when they + * restart. So for newly loaded older firmware we'll have to do the + * RESET for it so it starts up on a clean slate. We can tell if + * the newly loaded firmware will handle this right by checking + * its header flags to see if it advertises the capability. + */ + reset = ((ntohl(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0); + return t4_fw_restart(adap, mbox, reset); +} + + +/** + * t4_fw_config_file - setup an adapter via a Configuration File + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @mtype: the memory type where the Configuration File is located + * @maddr: the memory address where the Configuration File is located + * @finiver: return value for CF [fini] version + * @finicsum: return value for CF [fini] checksum + * @cfcsum: return value for CF computed checksum + * + * Issue a command to get the firmware to process the Configuration + * File located at the specified mtype/maddress. If the Configuration + * File is processed successfully and return value pointers are + * provided, the Configuration File "[fini] section version and + * checksum values will be returned along with the computed checksum. + * It's up to the caller to decide how it wants to respond to the + * checksums not matching but it recommended that a prominant warning + * be emitted in order to help people rapidly identify changed or + * corrupted Configuration Files. + * + * Also note that it's possible to modify things like "niccaps", + * "toecaps",etc. between processing the Configuration File and telling + * the firmware to use the new configuration. Callers which want to + * do this will need to "hand-roll" their own CAPS_CONFIGS commands for + * Configuration Files if they want to do this. + */ +int t4_fw_config_file(struct adapter *adap, unsigned int mbox, + unsigned int mtype, unsigned int maddr, + u32 *finiver, u32 *finicsum, u32 *cfcsum) +{ + struct fw_caps_config_cmd caps_cmd; + int ret; + + /* + * Tell the firmware to process the indicated Configuration File. + * If there are no errors and the caller has provided return value + * pointers for the [fini] section version, checksum and computed + * checksum, pass those back to the caller. + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ); + caps_cmd.retval_len16 = + htonl(FW_CAPS_CONFIG_CMD_CFVALID | + FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | + FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | + FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adap, mbox, &caps_cmd, sizeof(caps_cmd), &caps_cmd); + if (ret < 0) + return ret; + + if (finiver) + *finiver = ntohl(caps_cmd.finiver); + if (finicsum) + *finicsum = ntohl(caps_cmd.finicsum); + if (cfcsum) + *cfcsum = ntohl(caps_cmd.cfcsum); + + /* + * And now tell the firmware to use the configuration we just loaded. + */ + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE); + caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + return t4_wr_mbox(adap, mbox, &caps_cmd, sizeof(caps_cmd), NULL); +} + +/** + * t4_fixup_host_params - fix up host-dependent parameters + * @adap: the adapter + * @page_size: the host's Base Page Size + * @cache_line_size: the host's Cache Line Size + * + * Various registers in T4 contain values which are dependent on the + * host's Base Page and Cache Line Sizes. This function will fix all of + * those registers with the appropriate values as passed in ... + */ +int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, + unsigned int cache_line_size) +{ + unsigned int page_shift = fls(page_size) - 1; + unsigned int sge_hps = page_shift - 10; + unsigned int stat_len = cache_line_size > 64 ? 128 : 64; + unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size; + unsigned int fl_align_log = fls(fl_align) - 1; + + t4_write_reg(adap, SGE_HOST_PAGE_SIZE, + HOSTPAGESIZEPF0(sge_hps) | + HOSTPAGESIZEPF1(sge_hps) | + HOSTPAGESIZEPF2(sge_hps) | + HOSTPAGESIZEPF3(sge_hps) | + HOSTPAGESIZEPF4(sge_hps) | + HOSTPAGESIZEPF5(sge_hps) | + HOSTPAGESIZEPF6(sge_hps) | + HOSTPAGESIZEPF7(sge_hps)); + + t4_set_reg_field(adap, SGE_CONTROL, + INGPADBOUNDARY(INGPADBOUNDARY_MASK) | + EGRSTATUSPAGESIZE_MASK, + INGPADBOUNDARY(fl_align_log - 5) | + EGRSTATUSPAGESIZE(stat_len != 64)); + + /* + * Adjust various SGE Free List Host Buffer Sizes. + * + * This is something of a crock since we're using fixed indices into + * the array which are also known by the sge.c code and the T4 + * Firmware Configuration File. We need to come up with a much better + * approach to managing this array. For now, the first four entries + * are: + * + * 0: Host Page Size + * 1: 64KB + * 2: Buffer size corresponding to 1500 byte MTU (unpacked mode) + * 3: Buffer size corresponding to 9000 byte MTU (unpacked mode) + * + * For the single-MTU buffers in unpacked mode we need to include + * space for the SGE Control Packet Shift, 14 byte Ethernet header, + * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet + * Padding boundry. All of these are accommodated in the Factory + * Default Firmware Configuration File but we need to adjust it for + * this host's cache line size. + */ + t4_write_reg(adap, SGE_FL_BUFFER_SIZE0, page_size); + t4_write_reg(adap, SGE_FL_BUFFER_SIZE2, + (t4_read_reg(adap, SGE_FL_BUFFER_SIZE2) + fl_align-1) + & ~(fl_align-1)); + t4_write_reg(adap, SGE_FL_BUFFER_SIZE3, + (t4_read_reg(adap, SGE_FL_BUFFER_SIZE3) + fl_align-1) + & ~(fl_align-1)); + + t4_write_reg(adap, ULP_RX_TDDP_PSZ, HPZ0(page_shift - 12)); + + return 0; +} + +/** + * t4_fw_initialize - ask FW to initialize the device + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * + * Issues a command to FW to partially initialize the device. This + * performs initialization that generally doesn't depend on user input. + */ +int t4_fw_initialize(struct adapter *adap, unsigned int mbox) +{ + struct fw_initialize_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, INITIALIZE, WRITE); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** * t4_query_params - query FW or device parameters * @adap: the adapter * @mbox: mailbox to use for the FW command @@ -2835,10 +3514,6 @@ int __devinit t4_prep_adapter(struct adapter *adapter) return ret; } - ret = get_vpd_params(adapter, &adapter->params.vpd); - if (ret < 0) - return ret; - init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd); /* @@ -2846,6 +3521,7 @@ int __devinit t4_prep_adapter(struct adapter *adapter) */ adapter->params.nports = 1; adapter->params.portvec = 1; + adapter->params.vpd.cclk = 50000; return 0; } diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h index c26b455..f534ed7 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h @@ -58,6 +58,7 @@ enum { enum { SF_PAGE_SIZE = 256, /* serial flash page size */ + SF_SEC_SIZE = 64 * 1024, /* serial flash sector size */ }; enum { RSP_TYPE_FLBUF, RSP_TYPE_CPL, RSP_TYPE_INTR }; /* response entry types */ @@ -137,4 +138,83 @@ struct rsp_ctrl { #define QINTR_CNT_EN 0x1 #define QINTR_TIMER_IDX(x) ((x) << 1) #define QINTR_TIMER_IDX_GET(x) (((x) >> 1) & 0x7) + +/* + * Flash layout. + */ +#define FLASH_START(start) ((start) * SF_SEC_SIZE) +#define FLASH_MAX_SIZE(nsecs) ((nsecs) * SF_SEC_SIZE) + +enum { + /* + * Various Expansion-ROM boot images, etc. + */ + FLASH_EXP_ROM_START_SEC = 0, + FLASH_EXP_ROM_NSECS = 6, + FLASH_EXP_ROM_START = FLASH_START(FLASH_EXP_ROM_START_SEC), + FLASH_EXP_ROM_MAX_SIZE = FLASH_MAX_SIZE(FLASH_EXP_ROM_NSECS), + + /* + * iSCSI Boot Firmware Table (iBFT) and other driver-related + * parameters ... + */ + FLASH_IBFT_START_SEC = 6, + FLASH_IBFT_NSECS = 1, + FLASH_IBFT_START = FLASH_START(FLASH_IBFT_START_SEC), + FLASH_IBFT_MAX_SIZE = FLASH_MAX_SIZE(FLASH_IBFT_NSECS), + + /* + * Boot configuration data. + */ + FLASH_BOOTCFG_START_SEC = 7, + FLASH_BOOTCFG_NSECS = 1, + FLASH_BOOTCFG_START = FLASH_START(FLASH_BOOTCFG_START_SEC), + FLASH_BOOTCFG_MAX_SIZE = FLASH_MAX_SIZE(FLASH_BOOTCFG_NSECS), + + /* + * Location of firmware image in FLASH. + */ + FLASH_FW_START_SEC = 8, + FLASH_FW_NSECS = 8, + FLASH_FW_START = FLASH_START(FLASH_FW_START_SEC), + FLASH_FW_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FW_NSECS), + + /* + * iSCSI persistent/crash information. + */ + FLASH_ISCSI_CRASH_START_SEC = 29, + FLASH_ISCSI_CRASH_NSECS = 1, + FLASH_ISCSI_CRASH_START = FLASH_START(FLASH_ISCSI_CRASH_START_SEC), + FLASH_ISCSI_CRASH_MAX_SIZE = FLASH_MAX_SIZE(FLASH_ISCSI_CRASH_NSECS), + + /* + * FCoE persistent/crash information. + */ + FLASH_FCOE_CRASH_START_SEC = 30, + FLASH_FCOE_CRASH_NSECS = 1, + FLASH_FCOE_CRASH_START = FLASH_START(FLASH_FCOE_CRASH_START_SEC), + FLASH_FCOE_CRASH_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FCOE_CRASH_NSECS), + + /* + * Location of Firmware Configuration File in FLASH. Since the FPGA + * "FLASH" is smaller we need to store the Configuration File in a + * different location -- which will overlap the end of the firmware + * image if firmware ever gets that large ... + */ + FLASH_CFG_START_SEC = 31, + FLASH_CFG_NSECS = 1, + FLASH_CFG_START = FLASH_START(FLASH_CFG_START_SEC), + FLASH_CFG_MAX_SIZE = FLASH_MAX_SIZE(FLASH_CFG_NSECS), + + FLASH_FPGA_CFG_START_SEC = 15, + FLASH_FPGA_CFG_START = FLASH_START(FLASH_FPGA_CFG_START_SEC), + + /* + * Sectors 32-63 are reserved for FLASH failover. + */ +}; + +#undef FLASH_START +#undef FLASH_MAX_SIZE + #endif /* __T4_HW_H */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h index 111fc32..a1a8b57 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h @@ -86,10 +86,17 @@ #define CIDXINC_SHIFT 0 #define CIDXINC(x) ((x) << CIDXINC_SHIFT) +#define X_RXPKTCPLMODE_SPLIT 1 +#define X_INGPADBOUNDARY_SHIFT 5 + #define SGE_CONTROL 0x1008 #define DCASYSTYPE 0x00080000U -#define RXPKTCPLMODE 0x00040000U -#define EGRSTATUSPAGESIZE 0x00020000U +#define RXPKTCPLMODE_MASK 0x00040000U +#define RXPKTCPLMODE_SHIFT 18 +#define RXPKTCPLMODE(x) ((x) << RXPKTCPLMODE_SHIFT) +#define EGRSTATUSPAGESIZE_MASK 0x00020000U +#define EGRSTATUSPAGESIZE_SHIFT 17 +#define EGRSTATUSPAGESIZE(x) ((x) << EGRSTATUSPAGESIZE_SHIFT) #define PKTSHIFT_MASK 0x00001c00U #define PKTSHIFT_SHIFT 10 #define PKTSHIFT(x) ((x) << PKTSHIFT_SHIFT) @@ -108,6 +115,35 @@ #define GLOBALENABLE 0x00000001U #define SGE_HOST_PAGE_SIZE 0x100c + +#define HOSTPAGESIZEPF7_MASK 0x0000000fU +#define HOSTPAGESIZEPF7_SHIFT 28 +#define HOSTPAGESIZEPF7(x) ((x) << HOSTPAGESIZEPF7_SHIFT) + +#define HOSTPAGESIZEPF6_MASK 0x0000000fU +#define HOSTPAGESIZEPF6_SHIFT 24 +#define HOSTPAGESIZEPF6(x) ((x) << HOSTPAGESIZEPF6_SHIFT) + +#define HOSTPAGESIZEPF5_MASK 0x0000000fU +#define HOSTPAGESIZEPF5_SHIFT 20 +#define HOSTPAGESIZEPF5(x) ((x) << HOSTPAGESIZEPF5_SHIFT) + +#define HOSTPAGESIZEPF4_MASK 0x0000000fU +#define HOSTPAGESIZEPF4_SHIFT 16 +#define HOSTPAGESIZEPF4(x) ((x) << HOSTPAGESIZEPF4_SHIFT) + +#define HOSTPAGESIZEPF3_MASK 0x0000000fU +#define HOSTPAGESIZEPF3_SHIFT 12 +#define HOSTPAGESIZEPF3(x) ((x) << HOSTPAGESIZEPF3_SHIFT) + +#define HOSTPAGESIZEPF2_MASK 0x0000000fU +#define HOSTPAGESIZEPF2_SHIFT 8 +#define HOSTPAGESIZEPF2(x) ((x) << HOSTPAGESIZEPF2_SHIFT) + +#define HOSTPAGESIZEPF1_MASK 0x0000000fU +#define HOSTPAGESIZEPF1_SHIFT 4 +#define HOSTPAGESIZEPF1(x) ((x) << HOSTPAGESIZEPF1_SHIFT) + #define HOSTPAGESIZEPF0_MASK 0x0000000fU #define HOSTPAGESIZEPF0_SHIFT 0 #define HOSTPAGESIZEPF0(x) ((x) << HOSTPAGESIZEPF0_SHIFT) @@ -155,6 +191,8 @@ #define SGE_INT_ENABLE3 0x1040 #define SGE_FL_BUFFER_SIZE0 0x1044 #define SGE_FL_BUFFER_SIZE1 0x1048 +#define SGE_FL_BUFFER_SIZE2 0x104c +#define SGE_FL_BUFFER_SIZE3 0x1050 #define SGE_INGRESS_RX_THRESHOLD 0x10a0 #define THRESHOLD_0_MASK 0x3f000000U #define THRESHOLD_0_SHIFT 24 @@ -173,6 +211,12 @@ #define THRESHOLD_3(x) ((x) << THRESHOLD_3_SHIFT) #define THRESHOLD_3_GET(x) (((x) & THRESHOLD_3_MASK) >> THRESHOLD_3_SHIFT) +#define SGE_CONM_CTRL 0x1094 +#define EGRTHRESHOLD_MASK 0x00003f00U +#define EGRTHRESHOLDshift 8 +#define EGRTHRESHOLD(x) ((x) << EGRTHRESHOLDshift) +#define EGRTHRESHOLD_GET(x) (((x) & EGRTHRESHOLD_MASK) >> EGRTHRESHOLDshift) + #define SGE_TIMER_VALUE_0_AND_1 0x10b8 #define TIMERVALUE0_MASK 0xffff0000U #define TIMERVALUE0_SHIFT 16 @@ -184,64 +228,54 @@ #define TIMERVALUE1_GET(x) (((x) & TIMERVALUE1_MASK) >> TIMERVALUE1_SHIFT) #define SGE_TIMER_VALUE_2_AND_3 0x10bc +#define TIMERVALUE2_MASK 0xffff0000U +#define TIMERVALUE2_SHIFT 16 +#define TIMERVALUE2(x) ((x) << TIMERVALUE2_SHIFT) +#define TIMERVALUE2_GET(x) (((x) & TIMERVALUE2_MASK) >> TIMERVALUE2_SHIFT) +#define TIMERVALUE3_MASK 0x0000ffffU +#define TIMERVALUE3_SHIFT 0 +#define TIMERVALUE3(x) ((x) << TIMERVALUE3_SHIFT) +#define TIMERVALUE3_GET(x) (((x) & TIMERVALUE3_MASK) >> TIMERVALUE3_SHIFT) + #define SGE_TIMER_VALUE_4_AND_5 0x10c0 +#define TIMERVALUE4_MASK 0xffff0000U +#define TIMERVALUE4_SHIFT 16 +#define TIMERVALUE4(x) ((x) << TIMERVALUE4_SHIFT) +#define TIMERVALUE4_GET(x) (((x) & TIMERVALUE4_MASK) >> TIMERVALUE4_SHIFT) +#define TIMERVALUE5_MASK 0x0000ffffU +#define TIMERVALUE5_SHIFT 0 +#define TIMERVALUE5(x) ((x) << TIMERVALUE5_SHIFT) +#define TIMERVALUE5_GET(x) (((x) & TIMERVALUE5_MASK) >> TIMERVALUE5_SHIFT) + #define SGE_DEBUG_INDEX 0x10cc #define SGE_DEBUG_DATA_HIGH 0x10d0 #define SGE_DEBUG_DATA_LOW 0x10d4 #define SGE_INGRESS_QUEUES_PER_PAGE_PF 0x10f4 -#define S_LP_INT_THRESH 12 -#define V_LP_INT_THRESH(x) ((x) << S_LP_INT_THRESH) #define S_HP_INT_THRESH 28 +#define M_HP_INT_THRESH 0xfU #define V_HP_INT_THRESH(x) ((x) << S_HP_INT_THRESH) +#define M_HP_COUNT 0x7ffU +#define S_HP_COUNT 16 +#define G_HP_COUNT(x) (((x) >> S_HP_COUNT) & M_HP_COUNT) +#define S_LP_INT_THRESH 12 +#define M_LP_INT_THRESH 0xfU +#define V_LP_INT_THRESH(x) ((x) << S_LP_INT_THRESH) +#define M_LP_COUNT 0x7ffU +#define S_LP_COUNT 0 +#define G_LP_COUNT(x) (((x) >> S_LP_COUNT) & M_LP_COUNT) #define A_SGE_DBFIFO_STATUS 0x10a4 #define S_ENABLE_DROP 13 #define V_ENABLE_DROP(x) ((x) << S_ENABLE_DROP) #define F_ENABLE_DROP V_ENABLE_DROP(1U) -#define A_SGE_DOORBELL_CONTROL 0x10a8 - -#define A_SGE_CTXT_CMD 0x11fc -#define A_SGE_DBQ_CTXT_BADDR 0x1084 - -#define A_SGE_PF_KDOORBELL 0x0 - -#define S_QID 15 -#define V_QID(x) ((x) << S_QID) - -#define S_PIDX 0 -#define V_PIDX(x) ((x) << S_PIDX) - -#define M_LP_COUNT 0x7ffU -#define S_LP_COUNT 0 -#define G_LP_COUNT(x) (((x) >> S_LP_COUNT) & M_LP_COUNT) - -#define M_HP_COUNT 0x7ffU -#define S_HP_COUNT 16 -#define G_HP_COUNT(x) (((x) >> S_HP_COUNT) & M_HP_COUNT) - -#define A_SGE_INT_ENABLE3 0x1040 - -#define S_DBFIFO_HP_INT 8 -#define V_DBFIFO_HP_INT(x) ((x) << S_DBFIFO_HP_INT) -#define F_DBFIFO_HP_INT V_DBFIFO_HP_INT(1U) - -#define S_DBFIFO_LP_INT 7 -#define V_DBFIFO_LP_INT(x) ((x) << S_DBFIFO_LP_INT) -#define F_DBFIFO_LP_INT V_DBFIFO_LP_INT(1U) - #define S_DROPPED_DB 0 #define V_DROPPED_DB(x) ((x) << S_DROPPED_DB) #define F_DROPPED_DB V_DROPPED_DB(1U) +#define A_SGE_DOORBELL_CONTROL 0x10a8 -#define S_ERR_DROPPED_DB 18 -#define V_ERR_DROPPED_DB(x) ((x) << S_ERR_DROPPED_DB) -#define F_ERR_DROPPED_DB V_ERR_DROPPED_DB(1U) - -#define A_PCIE_MEM_ACCESS_OFFSET 0x306c - -#define M_HP_INT_THRESH 0xfU -#define M_LP_INT_THRESH 0xfU +#define A_SGE_CTXT_CMD 0x11fc +#define A_SGE_DBQ_CTXT_BADDR 0x1084 #define PCIE_PF_CLI 0x44 #define PCIE_INT_CAUSE 0x3004 @@ -287,6 +321,8 @@ #define WINDOW(x) ((x) << WINDOW_SHIFT) #define PCIE_MEM_ACCESS_OFFSET 0x306c +#define PCIE_FW 0x30b8 + #define PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS 0x5908 #define RNPP 0x80000000U #define RPCP 0x20000000U @@ -364,7 +400,7 @@ #define MEM_WRAP_CLIENT_NUM_MASK 0x0000000fU #define MEM_WRAP_CLIENT_NUM_SHIFT 0 #define MEM_WRAP_CLIENT_NUM_GET(x) (((x) & MEM_WRAP_CLIENT_NUM_MASK) >> MEM_WRAP_CLIENT_NUM_SHIFT) - +#define MA_PCIE_FW 0x30b8 #define MA_PARITY_ERROR_STATUS 0x77f4 #define EDC_0_BASE_ADDR 0x7900 @@ -385,6 +421,7 @@ #define CIM_BOOT_CFG 0x7b00 #define BOOTADDR_MASK 0xffffff00U +#define UPCRST 0x1U #define CIM_PF_MAILBOX_DATA 0x240 #define CIM_PF_MAILBOX_CTRL 0x280 @@ -457,6 +494,13 @@ #define VLANEXTENABLE_MASK 0x0000f000U #define VLANEXTENABLE_SHIFT 12 +#define TP_GLOBAL_CONFIG 0x7d08 +#define FIVETUPLELOOKUP_SHIFT 17 +#define FIVETUPLELOOKUP_MASK 0x00060000U +#define FIVETUPLELOOKUP(x) ((x) << FIVETUPLELOOKUP_SHIFT) +#define FIVETUPLELOOKUP_GET(x) (((x) & FIVETUPLELOOKUP_MASK) >> \ + FIVETUPLELOOKUP_SHIFT) + #define TP_PARA_REG2 0x7d68 #define MAXRXDATA_MASK 0xffff0000U #define MAXRXDATA_SHIFT 16 @@ -466,8 +510,47 @@ #define TIMERRESOLUTION_MASK 0x00ff0000U #define TIMERRESOLUTION_SHIFT 16 #define TIMERRESOLUTION_GET(x) (((x) & TIMERRESOLUTION_MASK) >> TIMERRESOLUTION_SHIFT) +#define DELAYEDACKRESOLUTION_MASK 0x000000ffU +#define DELAYEDACKRESOLUTION_SHIFT 0 +#define DELAYEDACKRESOLUTION_GET(x) \ + (((x) & DELAYEDACKRESOLUTION_MASK) >> DELAYEDACKRESOLUTION_SHIFT) #define TP_SHIFT_CNT 0x7dc0 +#define SYNSHIFTMAX_SHIFT 24 +#define SYNSHIFTMAX_MASK 0xff000000U +#define SYNSHIFTMAX(x) ((x) << SYNSHIFTMAX_SHIFT) +#define SYNSHIFTMAX_GET(x) (((x) & SYNSHIFTMAX_MASK) >> \ + SYNSHIFTMAX_SHIFT) +#define RXTSHIFTMAXR1_SHIFT 20 +#define RXTSHIFTMAXR1_MASK 0x00f00000U +#define RXTSHIFTMAXR1(x) ((x) << RXTSHIFTMAXR1_SHIFT) +#define RXTSHIFTMAXR1_GET(x) (((x) & RXTSHIFTMAXR1_MASK) >> \ + RXTSHIFTMAXR1_SHIFT) +#define RXTSHIFTMAXR2_SHIFT 16 +#define RXTSHIFTMAXR2_MASK 0x000f0000U +#define RXTSHIFTMAXR2(x) ((x) << RXTSHIFTMAXR2_SHIFT) +#define RXTSHIFTMAXR2_GET(x) (((x) & RXTSHIFTMAXR2_MASK) >> \ + RXTSHIFTMAXR2_SHIFT) +#define PERSHIFTBACKOFFMAX_SHIFT 12 +#define PERSHIFTBACKOFFMAX_MASK 0x0000f000U +#define PERSHIFTBACKOFFMAX(x) ((x) << PERSHIFTBACKOFFMAX_SHIFT) +#define PERSHIFTBACKOFFMAX_GET(x) (((x) & PERSHIFTBACKOFFMAX_MASK) >> \ + PERSHIFTBACKOFFMAX_SHIFT) +#define PERSHIFTMAX_SHIFT 8 +#define PERSHIFTMAX_MASK 0x00000f00U +#define PERSHIFTMAX(x) ((x) << PERSHIFTMAX_SHIFT) +#define PERSHIFTMAX_GET(x) (((x) & PERSHIFTMAX_MASK) >> \ + PERSHIFTMAX_SHIFT) +#define KEEPALIVEMAXR1_SHIFT 4 +#define KEEPALIVEMAXR1_MASK 0x000000f0U +#define KEEPALIVEMAXR1(x) ((x) << KEEPALIVEMAXR1_SHIFT) +#define KEEPALIVEMAXR1_GET(x) (((x) & KEEPALIVEMAXR1_MASK) >> \ + KEEPALIVEMAXR1_SHIFT) +#define KEEPALIVEMAXR2_SHIFT 0 +#define KEEPALIVEMAXR2_MASK 0x0000000fU +#define KEEPALIVEMAXR2(x) ((x) << KEEPALIVEMAXR2_SHIFT) +#define KEEPALIVEMAXR2_GET(x) (((x) & KEEPALIVEMAXR2_MASK) >> \ + KEEPALIVEMAXR2_SHIFT) #define TP_CCTRL_TABLE 0x7ddc #define TP_MTU_TABLE 0x7de4 @@ -501,6 +584,20 @@ #define TP_INT_CAUSE 0x7e74 #define FLMTXFLSTEMPTY 0x40000000U +#define TP_VLAN_PRI_MAP 0x140 +#define FRAGMENTATION_SHIFT 9 +#define FRAGMENTATION_MASK 0x00000200U +#define MPSHITTYPE_MASK 0x00000100U +#define MACMATCH_MASK 0x00000080U +#define ETHERTYPE_MASK 0x00000040U +#define PROTOCOL_MASK 0x00000020U +#define TOS_MASK 0x00000010U +#define VLAN_MASK 0x00000008U +#define VNIC_ID_MASK 0x00000004U +#define PORT_MASK 0x00000002U +#define FCOE_SHIFT 0 +#define FCOE_MASK 0x00000001U + #define TP_INGRESS_CONFIG 0x141 #define VNIC 0x00000800U #define CSUM_HAS_PSEUDO_HDR 0x00000400U diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h index ad53f79..a636463 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h @@ -79,6 +79,8 @@ struct fw_wr_hdr { #define FW_WR_FLOWID(x) ((x) << 8) #define FW_WR_LEN16(x) ((x) << 0) +#define HW_TPL_FR_MT_PR_IV_P_FC 0X32B + struct fw_ulptx_wr { __be32 op_to_compl; __be32 flowid_len16; @@ -155,6 +157,17 @@ struct fw_eth_tx_pkt_vm_wr { #define FW_CMD_MAX_TIMEOUT 3000 +/* + * If a host driver does a HELLO and discovers that there's already a MASTER + * selected, we may have to wait for that MASTER to finish issuing RESET, + * configuration and INITIALIZE commands. Also, there's a possibility that + * our own HELLO may get lost if it happens right as the MASTER is issuign a + * RESET command, so we need to be willing to make a few retries of our HELLO. + */ +#define FW_CMD_HELLO_TIMEOUT (3 * FW_CMD_MAX_TIMEOUT) +#define FW_CMD_HELLO_RETRIES 3 + + enum fw_cmd_opcodes { FW_LDST_CMD = 0x01, FW_RESET_CMD = 0x03, @@ -304,7 +317,17 @@ struct fw_reset_cmd { __be32 op_to_write; __be32 retval_len16; __be32 val; - __be32 r3; + __be32 halt_pkd; +}; + +#define FW_RESET_CMD_HALT_SHIFT 31 +#define FW_RESET_CMD_HALT_MASK 0x1 +#define FW_RESET_CMD_HALT(x) ((x) << FW_RESET_CMD_HALT_SHIFT) +#define FW_RESET_CMD_HALT_GET(x) \ + (((x) >> FW_RESET_CMD_HALT_SHIFT) & FW_RESET_CMD_HALT_MASK) + +enum fw_hellow_cmd { + fw_hello_cmd_stage_os = 0x0 }; struct fw_hello_cmd { @@ -315,8 +338,14 @@ struct fw_hello_cmd { #define FW_HELLO_CMD_INIT (1U << 30) #define FW_HELLO_CMD_MASTERDIS(x) ((x) << 29) #define FW_HELLO_CMD_MASTERFORCE(x) ((x) << 28) -#define FW_HELLO_CMD_MBMASTER(x) ((x) << 24) +#define FW_HELLO_CMD_MBMASTER_MASK 0xfU +#define FW_HELLO_CMD_MBMASTER_SHIFT 24 +#define FW_HELLO_CMD_MBMASTER(x) ((x) << FW_HELLO_CMD_MBMASTER_SHIFT) +#define FW_HELLO_CMD_MBMASTER_GET(x) \ + (((x) >> FW_HELLO_CMD_MBMASTER_SHIFT) & FW_HELLO_CMD_MBMASTER_MASK) #define FW_HELLO_CMD_MBASYNCNOT(x) ((x) << 20) +#define FW_HELLO_CMD_STAGE(x) ((x) << 17) +#define FW_HELLO_CMD_CLEARINIT (1U << 16) __be32 fwrev; }; @@ -401,6 +430,14 @@ enum fw_caps_config_fcoe { FW_CAPS_CONFIG_FCOE_TARGET = 0x00000002, }; +enum fw_memtype_cf { + FW_MEMTYPE_CF_EDC0 = 0x0, + FW_MEMTYPE_CF_EDC1 = 0x1, + FW_MEMTYPE_CF_EXTMEM = 0x2, + FW_MEMTYPE_CF_FLASH = 0x4, + FW_MEMTYPE_CF_INTERNAL = 0x5, +}; + struct fw_caps_config_cmd { __be32 op_to_write; __be32 retval_len16; @@ -416,10 +453,15 @@ struct fw_caps_config_cmd { __be16 r4; __be16 iscsicaps; __be16 fcoecaps; - __be32 r5; - __be64 r6; + __be32 cfcsum; + __be32 finiver; + __be32 finicsum; }; +#define FW_CAPS_CONFIG_CMD_CFVALID (1U << 27) +#define FW_CAPS_CONFIG_CMD_MEMTYPE_CF(x) ((x) << 24) +#define FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(x) ((x) << 16) + /* * params command mnemonics */ @@ -451,6 +493,7 @@ enum fw_params_param_dev { FW_PARAMS_PARAM_DEV_INTVER_FCOE = 0x0A, FW_PARAMS_PARAM_DEV_FWREV = 0x0B, FW_PARAMS_PARAM_DEV_TPREV = 0x0C, + FW_PARAMS_PARAM_DEV_CF = 0x0D, }; /* @@ -492,6 +535,8 @@ enum fw_params_param_pfvf { FW_PARAMS_PARAM_PFVF_IQFLINT_END = 0x2A, FW_PARAMS_PARAM_PFVF_EQ_START = 0x2B, FW_PARAMS_PARAM_PFVF_EQ_END = 0x2C, + FW_PARAMS_PARAM_PFVF_ACTIVE_FILTER_START = 0x2D, + FW_PARAMS_PARAM_PFVF_ACTIVE_FILTER_END = 0x2E }; /* @@ -507,8 +552,16 @@ enum fw_params_param_dmaq { #define FW_PARAMS_MNEM(x) ((x) << 24) #define FW_PARAMS_PARAM_X(x) ((x) << 16) -#define FW_PARAMS_PARAM_Y(x) ((x) << 8) -#define FW_PARAMS_PARAM_Z(x) ((x) << 0) +#define FW_PARAMS_PARAM_Y_SHIFT 8 +#define FW_PARAMS_PARAM_Y_MASK 0xffU +#define FW_PARAMS_PARAM_Y(x) ((x) << FW_PARAMS_PARAM_Y_SHIFT) +#define FW_PARAMS_PARAM_Y_GET(x) (((x) >> FW_PARAMS_PARAM_Y_SHIFT) &\ + FW_PARAMS_PARAM_Y_MASK) +#define FW_PARAMS_PARAM_Z_SHIFT 0 +#define FW_PARAMS_PARAM_Z_MASK 0xffu +#define FW_PARAMS_PARAM_Z(x) ((x) << FW_PARAMS_PARAM_Z_SHIFT) +#define FW_PARAMS_PARAM_Z_GET(x) (((x) >> FW_PARAMS_PARAM_Z_SHIFT) &\ + FW_PARAMS_PARAM_Z_MASK) #define FW_PARAMS_PARAM_XYZ(x) ((x) << 0) #define FW_PARAMS_PARAM_YZ(x) ((x) << 0) @@ -1599,6 +1652,16 @@ struct fw_debug_cmd { } u; }; +#define FW_PCIE_FW_ERR (1U << 31) +#define FW_PCIE_FW_INIT (1U << 30) +#define FW_PCIE_FW_HALT (1U << 29) +#define FW_PCIE_FW_MASTER_VLD (1U << 15) +#define FW_PCIE_FW_MASTER_MASK 0x7 +#define FW_PCIE_FW_MASTER_SHIFT 12 +#define FW_PCIE_FW_MASTER(x) ((x) << FW_PCIE_FW_MASTER_SHIFT) +#define FW_PCIE_FW_MASTER_GET(x) (((x) >> FW_PCIE_FW_MASTER_SHIFT) & \ + FW_PCIE_FW_MASTER_MASK) + struct fw_hdr { u8 ver; u8 reserved1; @@ -1613,7 +1676,11 @@ struct fw_hdr { u8 intfver_iscsi; u8 intfver_fcoe; u8 reserved2; - __be32 reserved3[27]; + __u32 reserved3; + __u32 reserved4; + __u32 reserved5; + __be32 flags; + __be32 reserved6[23]; }; #define FW_HDR_FW_VER_MAJOR_GET(x) (((x) >> 24) & 0xff) @@ -1621,18 +1688,8 @@ struct fw_hdr { #define FW_HDR_FW_VER_MICRO_GET(x) (((x) >> 8) & 0xff) #define FW_HDR_FW_VER_BUILD_GET(x) (((x) >> 0) & 0xff) -#define S_FW_CMD_OP 24 -#define V_FW_CMD_OP(x) ((x) << S_FW_CMD_OP) - -#define S_FW_CMD_REQUEST 23 -#define V_FW_CMD_REQUEST(x) ((x) << S_FW_CMD_REQUEST) -#define F_FW_CMD_REQUEST V_FW_CMD_REQUEST(1U) - -#define S_FW_CMD_WRITE 21 -#define V_FW_CMD_WRITE(x) ((x) << S_FW_CMD_WRITE) -#define F_FW_CMD_WRITE V_FW_CMD_WRITE(1U) - -#define S_FW_LDST_CMD_ADDRSPACE 0 -#define V_FW_LDST_CMD_ADDRSPACE(x) ((x) << S_FW_LDST_CMD_ADDRSPACE) +enum fw_hdr_flags { + FW_HDR_FLAGS_RESET_HALT = 0x00000001, +}; #endif /* _T4FW_INTERFACE_H_ */ diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c index 8877fbf..f16745f 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c @@ -2421,7 +2421,7 @@ int t4vf_sge_init(struct adapter *adapter) fl0, fl1); return -EINVAL; } - if ((sge_params->sge_control & RXPKTCPLMODE) == 0) { + if ((sge_params->sge_control & RXPKTCPLMODE_MASK) == 0) { dev_err(adapter->pdev_dev, "bad SGE CPL MODE\n"); return -EINVAL; } @@ -2431,7 +2431,8 @@ int t4vf_sge_init(struct adapter *adapter) */ if (fl1) FL_PG_ORDER = ilog2(fl1) - PAGE_SHIFT; - STAT_LEN = ((sge_params->sge_control & EGRSTATUSPAGESIZE) ? 128 : 64); + STAT_LEN = ((sge_params->sge_control & EGRSTATUSPAGESIZE_MASK) + ? 128 : 64); PKTSHIFT = PKTSHIFT_GET(sge_params->sge_control); FL_ALIGN = 1 << (INGPADBOUNDARY_GET(sge_params->sge_control) + SGE_INGPADBOUNDARY_SHIFT); |
