summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/chelsio/cxgb4/sge.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb4/sge.c')
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/sge.c341
1 files changed, 277 insertions, 64 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index d49933e..3ecc087 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -68,9 +68,6 @@
*/
#define RX_PKT_SKB_LEN 512
-/* Ethernet header padding prepended to RX_PKTs */
-#define RX_PKT_PAD 2
-
/*
* Max number of Tx descriptors we clean up at a time. Should be modest as
* freeing skbs isn't cheap and it happens while holding locks. We just need
@@ -137,13 +134,6 @@
*/
#define MAX_CTRL_WR_LEN SGE_MAX_WR_LEN
-enum {
- /* packet alignment in FL buffers */
- FL_ALIGN = L1_CACHE_BYTES < 32 ? 32 : L1_CACHE_BYTES,
- /* egress status entry size */
- STAT_LEN = L1_CACHE_BYTES > 64 ? 128 : 64
-};
-
struct tx_sw_desc { /* SW state per Tx descriptor */
struct sk_buff *skb;
struct ulptx_sgl *sgl;
@@ -155,16 +145,57 @@ struct rx_sw_desc { /* SW state per Rx descriptor */
};
/*
- * The low bits of rx_sw_desc.dma_addr have special meaning.
+ * Rx buffer sizes for "useskbs" Free List buffers (one ingress packet pe skb
+ * buffer). We currently only support two sizes for 1500- and 9000-byte MTUs.
+ * We could easily support more but there doesn't seem to be much need for
+ * that ...
+ */
+#define FL_MTU_SMALL 1500
+#define FL_MTU_LARGE 9000
+
+static inline unsigned int fl_mtu_bufsize(struct adapter *adapter,
+ unsigned int mtu)
+{
+ struct sge *s = &adapter->sge;
+
+ return ALIGN(s->pktshift + ETH_HLEN + VLAN_HLEN + mtu, s->fl_align);
+}
+
+#define FL_MTU_SMALL_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_SMALL)
+#define FL_MTU_LARGE_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_LARGE)
+
+/*
+ * Bits 0..3 of rx_sw_desc.dma_addr have special meaning. The hardware uses
+ * these to specify the buffer size as an index into the SGE Free List Buffer
+ * Size register array. We also use bit 4, when the buffer has been unmapped
+ * for DMA, but this is of course never sent to the hardware and is only used
+ * to prevent double unmappings. All of the above requires that the Free List
+ * Buffers which we allocate have the bottom 5 bits free (0) -- i.e. are
+ * 32-byte or or a power of 2 greater in alignment. Since the SGE's minimal
+ * Free List Buffer alignment is 32 bytes, this works out for us ...
*/
enum {
- RX_LARGE_BUF = 1 << 0, /* buffer is larger than PAGE_SIZE */
- RX_UNMAPPED_BUF = 1 << 1, /* buffer is not mapped */
+ RX_BUF_FLAGS = 0x1f, /* bottom five bits are special */
+ RX_BUF_SIZE = 0x0f, /* bottom three bits are for buf sizes */
+ RX_UNMAPPED_BUF = 0x10, /* buffer is not mapped */
+
+ /*
+ * XXX We shouldn't depend on being able to use these indices.
+ * XXX Especially when some other Master PF has initialized the
+ * XXX adapter or we use the Firmware Configuration File. We
+ * XXX should really search through the Host Buffer Size register
+ * XXX array for the appropriately sized buffer indices.
+ */
+ RX_SMALL_PG_BUF = 0x0, /* small (PAGE_SIZE) page buffer */
+ RX_LARGE_PG_BUF = 0x1, /* buffer large (FL_PG_ORDER) page buffer */
+
+ RX_SMALL_MTU_BUF = 0x2, /* small MTU buffer */
+ RX_LARGE_MTU_BUF = 0x3, /* large MTU buffer */
};
static inline dma_addr_t get_buf_addr(const struct rx_sw_desc *d)
{
- return d->dma_addr & ~(dma_addr_t)(RX_LARGE_BUF | RX_UNMAPPED_BUF);
+ return d->dma_addr & ~(dma_addr_t)RX_BUF_FLAGS;
}
static inline bool is_buf_mapped(const struct rx_sw_desc *d)
@@ -392,14 +423,35 @@ static inline void reclaim_completed_tx(struct adapter *adap, struct sge_txq *q,
}
}
-static inline int get_buf_size(const struct rx_sw_desc *d)
+static inline int get_buf_size(struct adapter *adapter,
+ const struct rx_sw_desc *d)
{
-#if FL_PG_ORDER > 0
- return (d->dma_addr & RX_LARGE_BUF) ? (PAGE_SIZE << FL_PG_ORDER) :
- PAGE_SIZE;
-#else
- return PAGE_SIZE;
-#endif
+ struct sge *s = &adapter->sge;
+ unsigned int rx_buf_size_idx = d->dma_addr & RX_BUF_SIZE;
+ int buf_size;
+
+ switch (rx_buf_size_idx) {
+ case RX_SMALL_PG_BUF:
+ buf_size = PAGE_SIZE;
+ break;
+
+ case RX_LARGE_PG_BUF:
+ buf_size = PAGE_SIZE << s->fl_pg_order;
+ break;
+
+ case RX_SMALL_MTU_BUF:
+ buf_size = FL_MTU_SMALL_BUFSIZE(adapter);
+ break;
+
+ case RX_LARGE_MTU_BUF:
+ buf_size = FL_MTU_LARGE_BUFSIZE(adapter);
+ break;
+
+ default:
+ BUG_ON(1);
+ }
+
+ return buf_size;
}
/**
@@ -418,7 +470,8 @@ static void free_rx_bufs(struct adapter *adap, struct sge_fl *q, int n)
if (is_buf_mapped(d))
dma_unmap_page(adap->pdev_dev, get_buf_addr(d),
- get_buf_size(d), PCI_DMA_FROMDEVICE);
+ get_buf_size(adap, d),
+ PCI_DMA_FROMDEVICE);
put_page(d->page);
d->page = NULL;
if (++q->cidx == q->size)
@@ -444,7 +497,7 @@ static void unmap_rx_buf(struct adapter *adap, struct sge_fl *q)
if (is_buf_mapped(d))
dma_unmap_page(adap->pdev_dev, get_buf_addr(d),
- get_buf_size(d), PCI_DMA_FROMDEVICE);
+ get_buf_size(adap, d), PCI_DMA_FROMDEVICE);
d->page = NULL;
if (++q->cidx == q->size)
q->cidx = 0;
@@ -485,6 +538,7 @@ static inline void set_rx_sw_desc(struct rx_sw_desc *sd, struct page *pg,
static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n,
gfp_t gfp)
{
+ struct sge *s = &adap->sge;
struct page *pg;
dma_addr_t mapping;
unsigned int cred = q->avail;
@@ -493,25 +547,27 @@ static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n,
gfp |= __GFP_NOWARN | __GFP_COLD;
-#if FL_PG_ORDER > 0
+ if (s->fl_pg_order == 0)
+ goto alloc_small_pages;
+
/*
* Prefer large buffers
*/
while (n) {
- pg = alloc_pages(gfp | __GFP_COMP, FL_PG_ORDER);
+ pg = alloc_pages(gfp | __GFP_COMP, s->fl_pg_order);
if (unlikely(!pg)) {
q->large_alloc_failed++;
break; /* fall back to single pages */
}
mapping = dma_map_page(adap->pdev_dev, pg, 0,
- PAGE_SIZE << FL_PG_ORDER,
+ PAGE_SIZE << s->fl_pg_order,
PCI_DMA_FROMDEVICE);
if (unlikely(dma_mapping_error(adap->pdev_dev, mapping))) {
- __free_pages(pg, FL_PG_ORDER);
+ __free_pages(pg, s->fl_pg_order);
goto out; /* do not try small pages for this error */
}
- mapping |= RX_LARGE_BUF;
+ mapping |= RX_LARGE_PG_BUF;
*d++ = cpu_to_be64(mapping);
set_rx_sw_desc(sd, pg, mapping);
@@ -525,8 +581,8 @@ static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n,
}
n--;
}
-#endif
+alloc_small_pages:
while (n--) {
pg = __skb_alloc_page(gfp, NULL);
if (unlikely(!pg)) {
@@ -769,8 +825,8 @@ static inline void ring_tx_db(struct adapter *adap, struct sge_txq *q, int n)
wmb(); /* write descriptors before telling HW */
spin_lock(&q->db_lock);
if (!q->db_disabled) {
- t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL),
- V_QID(q->cntxt_id) | V_PIDX(n));
+ t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL),
+ QID(q->cntxt_id) | PIDX(n));
}
q->db_pidx = q->pidx;
spin_unlock(&q->db_lock);
@@ -1519,6 +1575,8 @@ static noinline int handle_trace_pkt(struct adapter *adap,
static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl,
const struct cpl_rx_pkt *pkt)
{
+ struct adapter *adapter = rxq->rspq.adap;
+ struct sge *s = &adapter->sge;
int ret;
struct sk_buff *skb;
@@ -1529,8 +1587,8 @@ static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl,
return;
}
- copy_frags(skb, gl, RX_PKT_PAD);
- skb->len = gl->tot_len - RX_PKT_PAD;
+ copy_frags(skb, gl, s->pktshift);
+ skb->len = gl->tot_len - s->pktshift;
skb->data_len = skb->len;
skb->truesize += skb->data_len;
skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -1566,6 +1624,7 @@ int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp,
struct sk_buff *skb;
const struct cpl_rx_pkt *pkt;
struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
+ struct sge *s = &q->adap->sge;
if (unlikely(*(u8 *)rsp == CPL_TRACE_PKT))
return handle_trace_pkt(q->adap, si);
@@ -1585,7 +1644,7 @@ int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp,
return 0;
}
- __skb_pull(skb, RX_PKT_PAD); /* remove ethernet header padding */
+ __skb_pull(skb, s->pktshift); /* remove ethernet header padding */
skb->protocol = eth_type_trans(skb, q->netdev);
skb_record_rx_queue(skb, q->idx);
if (skb->dev->features & NETIF_F_RXHASH)
@@ -1696,6 +1755,8 @@ static int process_responses(struct sge_rspq *q, int budget)
int budget_left = budget;
const struct rsp_ctrl *rc;
struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
+ struct adapter *adapter = q->adap;
+ struct sge *s = &adapter->sge;
while (likely(budget_left)) {
rc = (void *)q->cur_desc + (q->iqe_len - sizeof(*rc));
@@ -1722,7 +1783,7 @@ static int process_responses(struct sge_rspq *q, int budget)
/* gather packet fragments */
for (frags = 0, fp = si.frags; ; frags++, fp++) {
rsd = &rxq->fl.sdesc[rxq->fl.cidx];
- bufsz = get_buf_size(rsd);
+ bufsz = get_buf_size(adapter, rsd);
fp->page = rsd->page;
fp->offset = q->offset;
fp->size = min(bufsz, len);
@@ -1747,7 +1808,7 @@ static int process_responses(struct sge_rspq *q, int budget)
si.nfrags = frags + 1;
ret = q->handler(q, q->cur_desc, &si);
if (likely(ret == 0))
- q->offset += ALIGN(fp->size, FL_ALIGN);
+ q->offset += ALIGN(fp->size, s->fl_align);
else
restore_rx_bufs(&si, &rxq->fl, frags);
} else if (likely(rsp_type == RSP_TYPE_CPL)) {
@@ -1983,6 +2044,7 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
{
int ret, flsz = 0;
struct fw_iq_cmd c;
+ struct sge *s = &adap->sge;
struct port_info *pi = netdev_priv(dev);
/* Size needs to be multiple of 16, including status entry. */
@@ -2015,11 +2077,11 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
fl->size = roundup(fl->size, 8);
fl->desc = alloc_ring(adap->pdev_dev, fl->size, sizeof(__be64),
sizeof(struct rx_sw_desc), &fl->addr,
- &fl->sdesc, STAT_LEN, NUMA_NO_NODE);
+ &fl->sdesc, s->stat_len, NUMA_NO_NODE);
if (!fl->desc)
goto fl_nomem;
- flsz = fl->size / 8 + STAT_LEN / sizeof(struct tx_desc);
+ flsz = fl->size / 8 + s->stat_len / sizeof(struct tx_desc);
c.iqns_to_fl0congen = htonl(FW_IQ_CMD_FL0PACKEN |
FW_IQ_CMD_FL0FETCHRO(1) |
FW_IQ_CMD_FL0DATARO(1) |
@@ -2096,14 +2158,15 @@ int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq,
{
int ret, nentries;
struct fw_eq_eth_cmd c;
+ struct sge *s = &adap->sge;
struct port_info *pi = netdev_priv(dev);
/* Add status entries */
- nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc);
+ nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
txq->q.desc = alloc_ring(adap->pdev_dev, txq->q.size,
sizeof(struct tx_desc), sizeof(struct tx_sw_desc),
- &txq->q.phys_addr, &txq->q.sdesc, STAT_LEN,
+ &txq->q.phys_addr, &txq->q.sdesc, s->stat_len,
netdev_queue_numa_node_read(netdevq));
if (!txq->q.desc)
return -ENOMEM;
@@ -2149,10 +2212,11 @@ int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq,
{
int ret, nentries;
struct fw_eq_ctrl_cmd c;
+ struct sge *s = &adap->sge;
struct port_info *pi = netdev_priv(dev);
/* Add status entries */
- nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc);
+ nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
txq->q.desc = alloc_ring(adap->pdev_dev, nentries,
sizeof(struct tx_desc), 0, &txq->q.phys_addr,
@@ -2200,14 +2264,15 @@ int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq,
{
int ret, nentries;
struct fw_eq_ofld_cmd c;
+ struct sge *s = &adap->sge;
struct port_info *pi = netdev_priv(dev);
/* Add status entries */
- nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc);
+ nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
txq->q.desc = alloc_ring(adap->pdev_dev, txq->q.size,
sizeof(struct tx_desc), sizeof(struct tx_sw_desc),
- &txq->q.phys_addr, &txq->q.sdesc, STAT_LEN,
+ &txq->q.phys_addr, &txq->q.sdesc, s->stat_len,
NUMA_NO_NODE);
if (!txq->q.desc)
return -ENOMEM;
@@ -2251,8 +2316,10 @@ int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq,
static void free_txq(struct adapter *adap, struct sge_txq *q)
{
+ struct sge *s = &adap->sge;
+
dma_free_coherent(adap->pdev_dev,
- q->size * sizeof(struct tx_desc) + STAT_LEN,
+ q->size * sizeof(struct tx_desc) + s->stat_len,
q->desc, q->phys_addr);
q->cntxt_id = 0;
q->sdesc = NULL;
@@ -2262,6 +2329,7 @@ static void free_txq(struct adapter *adap, struct sge_txq *q)
static void free_rspq_fl(struct adapter *adap, struct sge_rspq *rq,
struct sge_fl *fl)
{
+ struct sge *s = &adap->sge;
unsigned int fl_id = fl ? fl->cntxt_id : 0xffff;
adap->sge.ingr_map[rq->cntxt_id - adap->sge.ingr_start] = NULL;
@@ -2276,7 +2344,7 @@ static void free_rspq_fl(struct adapter *adap, struct sge_rspq *rq,
if (fl) {
free_rx_bufs(adap, fl, fl->avail);
- dma_free_coherent(adap->pdev_dev, fl->size * 8 + STAT_LEN,
+ dma_free_coherent(adap->pdev_dev, fl->size * 8 + s->stat_len,
fl->desc, fl->addr);
kfree(fl->sdesc);
fl->sdesc = NULL;
@@ -2408,18 +2476,112 @@ void t4_sge_stop(struct adapter *adap)
* Performs SGE initialization needed every time after a chip reset.
* We do not initialize any of the queues here, instead the driver
* top-level must request them individually.
+ *
+ * Called in two different modes:
+ *
+ * 1. Perform actual hardware initialization and record hard-coded
+ * parameters which were used. This gets used when we're the
+ * Master PF and the Firmware Configuration File support didn't
+ * work for some reason.
+ *
+ * 2. We're not the Master PF or initialization was performed with
+ * a Firmware Configuration File. In this case we need to grab
+ * any of the SGE operating parameters that we need to have in
+ * order to do our job and make sure we can live with them ...
*/
-void t4_sge_init(struct adapter *adap)
+
+static int t4_sge_init_soft(struct adapter *adap)
{
- unsigned int i, v;
struct sge *s = &adap->sge;
- unsigned int fl_align_log = ilog2(FL_ALIGN);
+ u32 fl_small_pg, fl_large_pg, fl_small_mtu, fl_large_mtu;
+ u32 timer_value_0_and_1, timer_value_2_and_3, timer_value_4_and_5;
+ u32 ingress_rx_threshold;
- t4_set_reg_field(adap, SGE_CONTROL, PKTSHIFT_MASK |
- INGPADBOUNDARY_MASK | EGRSTATUSPAGESIZE,
- INGPADBOUNDARY(fl_align_log - 5) | PKTSHIFT(2) |
- RXPKTCPLMODE |
- (STAT_LEN == 128 ? EGRSTATUSPAGESIZE : 0));
+ /*
+ * Verify that CPL messages are going to the Ingress Queue for
+ * process_responses() and that only packet data is going to the
+ * Free Lists.
+ */
+ if ((t4_read_reg(adap, SGE_CONTROL) & RXPKTCPLMODE_MASK) !=
+ RXPKTCPLMODE(X_RXPKTCPLMODE_SPLIT)) {
+ dev_err(adap->pdev_dev, "bad SGE CPL MODE\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Validate the Host Buffer Register Array indices that we want to
+ * use ...
+ *
+ * XXX Note that we should really read through the Host Buffer Size
+ * XXX register array and find the indices of the Buffer Sizes which
+ * XXX meet our needs!
+ */
+ #define READ_FL_BUF(x) \
+ t4_read_reg(adap, SGE_FL_BUFFER_SIZE0+(x)*sizeof(u32))
+
+ fl_small_pg = READ_FL_BUF(RX_SMALL_PG_BUF);
+ fl_large_pg = READ_FL_BUF(RX_LARGE_PG_BUF);
+ fl_small_mtu = READ_FL_BUF(RX_SMALL_MTU_BUF);
+ fl_large_mtu = READ_FL_BUF(RX_LARGE_MTU_BUF);
+
+ #undef READ_FL_BUF
+
+ if (fl_small_pg != PAGE_SIZE ||
+ (fl_large_pg != 0 && (fl_large_pg <= fl_small_pg ||
+ (fl_large_pg & (fl_large_pg-1)) != 0))) {
+ dev_err(adap->pdev_dev, "bad SGE FL page buffer sizes [%d, %d]\n",
+ fl_small_pg, fl_large_pg);
+ return -EINVAL;
+ }
+ if (fl_large_pg)
+ s->fl_pg_order = ilog2(fl_large_pg) - PAGE_SHIFT;
+
+ if (fl_small_mtu < FL_MTU_SMALL_BUFSIZE(adap) ||
+ fl_large_mtu < FL_MTU_LARGE_BUFSIZE(adap)) {
+ dev_err(adap->pdev_dev, "bad SGE FL MTU sizes [%d, %d]\n",
+ fl_small_mtu, fl_large_mtu);
+ return -EINVAL;
+ }
+
+ /*
+ * Retrieve our RX interrupt holdoff timer values and counter
+ * threshold values from the SGE parameters.
+ */
+ timer_value_0_and_1 = t4_read_reg(adap, SGE_TIMER_VALUE_0_AND_1);
+ timer_value_2_and_3 = t4_read_reg(adap, SGE_TIMER_VALUE_2_AND_3);
+ timer_value_4_and_5 = t4_read_reg(adap, SGE_TIMER_VALUE_4_AND_5);
+ s->timer_val[0] = core_ticks_to_us(adap,
+ TIMERVALUE0_GET(timer_value_0_and_1));
+ s->timer_val[1] = core_ticks_to_us(adap,
+ TIMERVALUE1_GET(timer_value_0_and_1));
+ s->timer_val[2] = core_ticks_to_us(adap,
+ TIMERVALUE2_GET(timer_value_2_and_3));
+ s->timer_val[3] = core_ticks_to_us(adap,
+ TIMERVALUE3_GET(timer_value_2_and_3));
+ s->timer_val[4] = core_ticks_to_us(adap,
+ TIMERVALUE4_GET(timer_value_4_and_5));
+ s->timer_val[5] = core_ticks_to_us(adap,
+ TIMERVALUE5_GET(timer_value_4_and_5));
+
+ ingress_rx_threshold = t4_read_reg(adap, SGE_INGRESS_RX_THRESHOLD);
+ s->counter_val[0] = THRESHOLD_0_GET(ingress_rx_threshold);
+ s->counter_val[1] = THRESHOLD_1_GET(ingress_rx_threshold);
+ s->counter_val[2] = THRESHOLD_2_GET(ingress_rx_threshold);
+ s->counter_val[3] = THRESHOLD_3_GET(ingress_rx_threshold);
+
+ return 0;
+}
+
+static int t4_sge_init_hard(struct adapter *adap)
+{
+ struct sge *s = &adap->sge;
+
+ /*
+ * Set up our basic SGE mode to deliver CPL messages to our Ingress
+ * Queue and Packet Date to the Free List.
+ */
+ t4_set_reg_field(adap, SGE_CONTROL, RXPKTCPLMODE_MASK,
+ RXPKTCPLMODE_MASK);
/*
* Set up to drop DOORBELL writes when the DOORBELL FIFO overflows
@@ -2433,13 +2595,24 @@ void t4_sge_init(struct adapter *adap)
t4_set_reg_field(adap, A_SGE_DOORBELL_CONTROL, F_ENABLE_DROP,
F_ENABLE_DROP);
- for (i = v = 0; i < 32; i += 4)
- v |= (PAGE_SHIFT - 10) << i;
- t4_write_reg(adap, SGE_HOST_PAGE_SIZE, v);
- t4_write_reg(adap, SGE_FL_BUFFER_SIZE0, PAGE_SIZE);
-#if FL_PG_ORDER > 0
- t4_write_reg(adap, SGE_FL_BUFFER_SIZE1, PAGE_SIZE << FL_PG_ORDER);
-#endif
+ /*
+ * SGE_FL_BUFFER_SIZE0 (RX_SMALL_PG_BUF) is set up by
+ * t4_fixup_host_params().
+ */
+ s->fl_pg_order = FL_PG_ORDER;
+ if (s->fl_pg_order)
+ t4_write_reg(adap,
+ SGE_FL_BUFFER_SIZE0+RX_LARGE_PG_BUF*sizeof(u32),
+ PAGE_SIZE << FL_PG_ORDER);
+ t4_write_reg(adap, SGE_FL_BUFFER_SIZE0+RX_SMALL_MTU_BUF*sizeof(u32),
+ FL_MTU_SMALL_BUFSIZE(adap));
+ t4_write_reg(adap, SGE_FL_BUFFER_SIZE0+RX_LARGE_MTU_BUF*sizeof(u32),
+ FL_MTU_LARGE_BUFSIZE(adap));
+
+ /*
+ * Note that the SGE Ingress Packet Count Interrupt Threshold and
+ * Timer Holdoff values must be supplied by our caller.
+ */
t4_write_reg(adap, SGE_INGRESS_RX_THRESHOLD,
THRESHOLD_0(s->counter_val[0]) |
THRESHOLD_1(s->counter_val[1]) |
@@ -2449,14 +2622,54 @@ void t4_sge_init(struct adapter *adap)
TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[0])) |
TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[1])));
t4_write_reg(adap, SGE_TIMER_VALUE_2_AND_3,
- TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[2])) |
- TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[3])));
+ TIMERVALUE2(us_to_core_ticks(adap, s->timer_val[2])) |
+ TIMERVALUE3(us_to_core_ticks(adap, s->timer_val[3])));
t4_write_reg(adap, SGE_TIMER_VALUE_4_AND_5,
- TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[4])) |
- TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[5])));
+ TIMERVALUE4(us_to_core_ticks(adap, s->timer_val[4])) |
+ TIMERVALUE5(us_to_core_ticks(adap, s->timer_val[5])));
+
+ return 0;
+}
+
+int t4_sge_init(struct adapter *adap)
+{
+ struct sge *s = &adap->sge;
+ u32 sge_control;
+ int ret;
+
+ /*
+ * Ingress Padding Boundary and Egress Status Page Size are set up by
+ * t4_fixup_host_params().
+ */
+ sge_control = t4_read_reg(adap, SGE_CONTROL);
+ s->pktshift = PKTSHIFT_GET(sge_control);
+ s->stat_len = (sge_control & EGRSTATUSPAGESIZE_MASK) ? 128 : 64;
+ s->fl_align = 1 << (INGPADBOUNDARY_GET(sge_control) +
+ X_INGPADBOUNDARY_SHIFT);
+
+ if (adap->flags & USING_SOFT_PARAMS)
+ ret = t4_sge_init_soft(adap);
+ else
+ ret = t4_sge_init_hard(adap);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * A FL with <= fl_starve_thres buffers is starving and a periodic
+ * timer will attempt to refill it. This needs to be larger than the
+ * SGE's Egress Congestion Threshold. If it isn't, then we can get
+ * stuck waiting for new packets while the SGE is waiting for us to
+ * give it more Free List entries. (Note that the SGE's Egress
+ * Congestion Threshold is in units of 2 Free List pointers.)
+ */
+ s->fl_starve_thres
+ = EGRTHRESHOLD_GET(t4_read_reg(adap, SGE_CONM_CTRL))*2 + 1;
+
setup_timer(&s->rx_timer, sge_rx_timer_cb, (unsigned long)adap);
setup_timer(&s->tx_timer, sge_tx_timer_cb, (unsigned long)adap);
s->starve_thres = core_ticks_per_usec(adap) * 1000000; /* 1 s */
s->idma_state[0] = s->idma_state[1] = 0;
spin_lock_init(&s->intrq_lock);
+
+ return 0;
}
OpenPOWER on IntegriCloud