diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 954 |
1 files changed, 838 insertions, 116 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 9339854..6b9f6bb 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -78,28 +78,45 @@ */ #define MAX_SGE_TIMERVAL 200U -#ifdef CONFIG_PCI_IOV -/* - * Virtual Function provisioning constants. We need two extra Ingress Queues - * with Interrupt capability to serve as the VF's Firmware Event Queue and - * Forwarded Interrupt Queue (when using MSI mode) -- neither will have Free - * Lists associated with them). For each Ethernet/Control Egress Queue and - * for each Free List, we need an Egress Context. - */ enum { + /* + * Physical Function provisioning constants. + */ + PFRES_NVI = 4, /* # of Virtual Interfaces */ + PFRES_NETHCTRL = 128, /* # of EQs used for ETH or CTRL Qs */ + PFRES_NIQFLINT = 128, /* # of ingress Qs/w Free List(s)/intr + */ + PFRES_NEQ = 256, /* # of egress queues */ + PFRES_NIQ = 0, /* # of ingress queues */ + PFRES_TC = 0, /* PCI-E traffic class */ + PFRES_NEXACTF = 128, /* # of exact MPS filters */ + + PFRES_R_CAPS = FW_CMD_CAP_PF, + PFRES_WX_CAPS = FW_CMD_CAP_PF, + +#ifdef CONFIG_PCI_IOV + /* + * Virtual Function provisioning constants. We need two extra Ingress + * Queues with Interrupt capability to serve as the VF's Firmware + * Event Queue and Forwarded Interrupt Queue (when using MSI mode) -- + * neither will have Free Lists associated with them). For each + * Ethernet/Control Egress Queue and for each Free List, we need an + * Egress Context. + */ VFRES_NPORTS = 1, /* # of "ports" per VF */ VFRES_NQSETS = 2, /* # of "Queue Sets" per VF */ VFRES_NVI = VFRES_NPORTS, /* # of Virtual Interfaces */ VFRES_NETHCTRL = VFRES_NQSETS, /* # of EQs used for ETH or CTRL Qs */ VFRES_NIQFLINT = VFRES_NQSETS+2,/* # of ingress Qs/w Free List(s)/intr */ - VFRES_NIQ = 0, /* # of non-fl/int ingress queues */ VFRES_NEQ = VFRES_NQSETS*2, /* # of egress queues */ + VFRES_NIQ = 0, /* # of non-fl/int ingress queues */ VFRES_TC = 0, /* PCI-E traffic class */ VFRES_NEXACTF = 16, /* # of exact MPS filters */ VFRES_R_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF|FW_CMD_CAP_PORT, VFRES_WX_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF, +#endif }; /* @@ -146,7 +163,6 @@ static unsigned int pfvfres_pmask(struct adapter *adapter, } /*NOTREACHED*/ } -#endif enum { MAX_TXQ_ENTRIES = 16384, @@ -193,6 +209,7 @@ static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = { }; #define FW_FNAME "cxgb4/t4fw.bin" +#define FW_CFNAME "cxgb4/t4-config.txt" MODULE_DESCRIPTION(DRV_DESC); MODULE_AUTHOR("Chelsio Communications"); @@ -201,6 +218,28 @@ MODULE_VERSION(DRV_VERSION); MODULE_DEVICE_TABLE(pci, cxgb4_pci_tbl); MODULE_FIRMWARE(FW_FNAME); +/* + * Normally we're willing to become the firmware's Master PF but will be happy + * if another PF has already become the Master and initialized the adapter. + * Setting "force_init" will cause this driver to forcibly establish itself as + * the Master PF and initialize the adapter. + */ +static uint force_init; + +module_param(force_init, uint, 0644); +MODULE_PARM_DESC(force_init, "Forcibly become Master PF and initialize adapter"); + +/* + * Normally if the firmware we connect to has Configuration File support, we + * use that and only fall back to the old Driver-based initialization if the + * Configuration File fails for some reason. If force_old_init is set, then + * we'll always use the old Driver-based initialization sequence. + */ +static uint force_old_init; + +module_param(force_old_init, uint, 0644); +MODULE_PARM_DESC(force_old_init, "Force old initialization sequence"); + static int dflt_msg_enable = DFLT_MSG_ENABLE; module_param(dflt_msg_enable, int, 0644); @@ -236,6 +275,20 @@ module_param_array(intr_cnt, uint, NULL, 0644); MODULE_PARM_DESC(intr_cnt, "thresholds 1..3 for queue interrupt packet counters"); +/* + * Normally we tell the chip to deliver Ingress Packets into our DMA buffers + * offset by 2 bytes in order to have the IP headers line up on 4-byte + * boundaries. This is a requirement for many architectures which will throw + * a machine check fault if an attempt is made to access one of the 4-byte IP + * header fields on a non-4-byte boundary. And it's a major performance issue + * even on some architectures which allow it like some implementations of the + * x86 ISA. However, some architectures don't mind this and for some very + * edge-case performance sensitive applications (like forwarding large volumes + * of small packets), setting this DMA offset to 0 will decrease the number of + * PCI-E Bus transfers enough to measurably affect performance. + */ +static int rx_dma_offset = 2; + static bool vf_acls; #ifdef CONFIG_PCI_IOV @@ -248,6 +301,30 @@ module_param_array(num_vf, uint, NULL, 0644); MODULE_PARM_DESC(num_vf, "number of VFs for each of PFs 0-3"); #endif +/* + * The filter TCAM has a fixed portion and a variable portion. The fixed + * portion can match on source/destination IP IPv4/IPv6 addresses and TCP/UDP + * ports. The variable portion is 36 bits which can include things like Exact + * Match MAC Index (9 bits), Ether Type (16 bits), IP Protocol (8 bits), + * [Inner] VLAN Tag (17 bits), etc. which, if all were somehow selected, would + * far exceed the 36-bit budget for this "compressed" header portion of the + * filter. Thus, we have a scarce resource which must be carefully managed. + * + * By default we set this up to mostly match the set of filter matching + * capabilities of T3 but with accommodations for some of T4's more + * interesting features: + * + * { IP Fragment (1), MPS Match Type (3), IP Protocol (8), + * [Inner] VLAN (17), Port (3), FCoE (1) } + */ +enum { + TP_VLAN_PRI_MAP_DEFAULT = HW_TPL_FR_MT_PR_IV_P_FC, + TP_VLAN_PRI_MAP_FIRST = FCOE_SHIFT, + TP_VLAN_PRI_MAP_LAST = FRAGMENTATION_SHIFT, +}; + +static unsigned int tp_vlan_pri_map = TP_VLAN_PRI_MAP_DEFAULT; + static struct dentry *cxgb4_debugfs_root; static LIST_HEAD(adapter_list); @@ -852,11 +929,25 @@ static int upgrade_fw(struct adapter *adap) */ if (FW_HDR_FW_VER_MAJOR_GET(adap->params.fw_vers) != FW_VERSION_MAJOR || vers > adap->params.fw_vers) { - ret = -t4_load_fw(adap, fw->data, fw->size); + dev_info(dev, "upgrading firmware ...\n"); + ret = t4_fw_upgrade(adap, adap->mbox, fw->data, fw->size, + /*force=*/false); if (!ret) - dev_info(dev, "firmware upgraded to version %pI4 from " - FW_FNAME "\n", &hdr->fw_ver); + dev_info(dev, "firmware successfully upgraded to " + FW_FNAME " (%d.%d.%d.%d)\n", + FW_HDR_FW_VER_MAJOR_GET(vers), + FW_HDR_FW_VER_MINOR_GET(vers), + FW_HDR_FW_VER_MICRO_GET(vers), + FW_HDR_FW_VER_BUILD_GET(vers)); + else + dev_err(dev, "firmware upgrade failed! err=%d\n", -ret); + } else { + /* + * Tell our caller that we didn't upgrade the firmware. + */ + ret = -EINVAL; } + out: release_firmware(fw); return ret; } @@ -2470,8 +2561,8 @@ int cxgb4_sync_txq_pidx(struct net_device *dev, u16 qid, u16 pidx, else delta = size - hw_pidx + pidx; wmb(); - t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL), - V_QID(qid) | V_PIDX(delta)); + t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL), + QID(qid) | PIDX(delta)); } out: return ret; @@ -2579,8 +2670,8 @@ static void sync_txq_pidx(struct adapter *adap, struct sge_txq *q) else delta = q->size - hw_pidx + q->db_pidx; wmb(); - t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL), - V_QID(q->cntxt_id) | V_PIDX(delta)); + t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL), + QID(q->cntxt_id) | PIDX(delta)); } out: q->db_disabled = 0; @@ -2617,9 +2708,9 @@ static void process_db_full(struct work_struct *work) notify_rdma_uld(adap, CXGB4_CONTROL_DB_FULL); drain_db_fifo(adap, dbfifo_drain_delay); - t4_set_reg_field(adap, A_SGE_INT_ENABLE3, - F_DBFIFO_HP_INT | F_DBFIFO_LP_INT, - F_DBFIFO_HP_INT | F_DBFIFO_LP_INT); + t4_set_reg_field(adap, SGE_INT_ENABLE3, + DBFIFO_HP_INT | DBFIFO_LP_INT, + DBFIFO_HP_INT | DBFIFO_LP_INT); notify_rdma_uld(adap, CXGB4_CONTROL_DB_EMPTY); } @@ -2639,8 +2730,8 @@ static void process_db_drop(struct work_struct *work) void t4_db_full(struct adapter *adap) { - t4_set_reg_field(adap, A_SGE_INT_ENABLE3, - F_DBFIFO_HP_INT | F_DBFIFO_LP_INT, 0); + t4_set_reg_field(adap, SGE_INT_ENABLE3, + DBFIFO_HP_INT | DBFIFO_LP_INT, 0); queue_work(workq, &adap->db_full_task); } @@ -3076,6 +3167,10 @@ static void setup_memwin(struct adapter *adap) t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2), (bar0 + MEMWIN2_BASE) | BIR(0) | WINDOW(ilog2(MEMWIN2_APERTURE) - 10)); +} + +static void setup_memwin_rdma(struct adapter *adap) +{ if (adap->vres.ocq.size) { unsigned int start, sz_kb; @@ -3155,6 +3250,488 @@ static int adap_init1(struct adapter *adap, struct fw_caps_config_cmd *c) /* * Phase 0 of initialization: contact FW, obtain config, perform basic init. + * + * If the firmware we're dealing with has Configuration File support, then + * we use that to perform all configuration + */ + +/* + * Tweak configuration based on module parameters, etc. Most of these have + * defaults assigned to them by Firmware Configuration Files (if we're using + * them) but need to be explicitly set if we're using hard-coded + * initialization. But even in the case of using Firmware Configuration + * Files, we'd like to expose the ability to change these via module + * parameters so these are essentially common tweaks/settings for + * Configuration Files and hard-coded initialization ... + */ +static int adap_init0_tweaks(struct adapter *adapter) +{ + /* + * Fix up various Host-Dependent Parameters like Page Size, Cache + * Line Size, etc. The firmware default is for a 4KB Page Size and + * 64B Cache Line Size ... + */ + t4_fixup_host_params(adapter, PAGE_SIZE, L1_CACHE_BYTES); + + /* + * Process module parameters which affect early initialization. + */ + if (rx_dma_offset != 2 && rx_dma_offset != 0) { + dev_err(&adapter->pdev->dev, + "Ignoring illegal rx_dma_offset=%d, using 2\n", + rx_dma_offset); + rx_dma_offset = 2; + } + t4_set_reg_field(adapter, SGE_CONTROL, + PKTSHIFT_MASK, + PKTSHIFT(rx_dma_offset)); + + /* + * Don't include the "IP Pseudo Header" in CPL_RX_PKT checksums: Linux + * adds the pseudo header itself. + */ + t4_tp_wr_bits_indirect(adapter, TP_INGRESS_CONFIG, + CSUM_HAS_PSEUDO_HDR, 0); + + return 0; +} + +/* + * Attempt to initialize the adapter via a Firmware Configuration File. + */ +static int adap_init0_config(struct adapter *adapter, int reset) +{ + struct fw_caps_config_cmd caps_cmd; + const struct firmware *cf; + unsigned long mtype = 0, maddr = 0; + u32 finiver, finicsum, cfcsum; + int ret, using_flash; + + /* + * Reset device if necessary. + */ + if (reset) { + ret = t4_fw_reset(adapter, adapter->mbox, + PIORSTMODE | PIORST); + if (ret < 0) + goto bye; + } + + /* + * If we have a T4 configuration file under /lib/firmware/cxgb4/, + * then use that. Otherwise, use the configuration file stored + * in the adapter flash ... + */ + ret = request_firmware(&cf, FW_CFNAME, adapter->pdev_dev); + if (ret < 0) { + using_flash = 1; + mtype = FW_MEMTYPE_CF_FLASH; + maddr = t4_flash_cfg_addr(adapter); + } else { + u32 params[7], val[7]; + + using_flash = 0; + if (cf->size >= FLASH_CFG_MAX_SIZE) + ret = -ENOMEM; + else { + params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF)); + ret = t4_query_params(adapter, adapter->mbox, + adapter->fn, 0, 1, params, val); + if (ret == 0) { + /* + * For t4_memory_write() below addresses and + * sizes have to be in terms of multiples of 4 + * bytes. So, if the Configuration File isn't + * a multiple of 4 bytes in length we'll have + * to write that out separately since we can't + * guarantee that the bytes following the + * residual byte in the buffer returned by + * request_firmware() are zeroed out ... + */ + size_t resid = cf->size & 0x3; + size_t size = cf->size & ~0x3; + __be32 *data = (__be32 *)cf->data; + + mtype = FW_PARAMS_PARAM_Y_GET(val[0]); + maddr = FW_PARAMS_PARAM_Z_GET(val[0]) << 16; + + ret = t4_memory_write(adapter, mtype, maddr, + size, data); + if (ret == 0 && resid != 0) { + union { + __be32 word; + char buf[4]; + } last; + int i; + + last.word = data[size >> 2]; + for (i = resid; i < 4; i++) + last.buf[i] = 0; + ret = t4_memory_write(adapter, mtype, + maddr + size, + 4, &last.word); + } + } + } + + release_firmware(cf); + if (ret) + goto bye; + } + + /* + * Issue a Capability Configuration command to the firmware to get it + * to parse the Configuration File. We don't use t4_fw_config_file() + * because we want the ability to modify various features after we've + * processed the configuration file ... + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ); + caps_cmd.retval_len16 = + htonl(FW_CAPS_CONFIG_CMD_CFVALID | + FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | + FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | + FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + if (ret < 0) + goto bye; + + finiver = ntohl(caps_cmd.finiver); + finicsum = ntohl(caps_cmd.finicsum); + cfcsum = ntohl(caps_cmd.cfcsum); + if (finicsum != cfcsum) + dev_warn(adapter->pdev_dev, "Configuration File checksum "\ + "mismatch: [fini] csum=%#x, computed csum=%#x\n", + finicsum, cfcsum); + + /* + * If we're a pure NIC driver then disable all offloading facilities. + * This will allow the firmware to optimize aspects of the hardware + * configuration which will result in improved performance. + */ + caps_cmd.ofldcaps = 0; + caps_cmd.iscsicaps = 0; + caps_cmd.rdmacaps = 0; + caps_cmd.fcoecaps = 0; + + /* + * And now tell the firmware to use the configuration we just loaded. + */ + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE); + caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + NULL); + if (ret < 0) + goto bye; + + /* + * Tweak configuration based on system architecture, module + * parameters, etc. + */ + ret = adap_init0_tweaks(adapter); + if (ret < 0) + goto bye; + + /* + * And finally tell the firmware to initialize itself using the + * parameters from the Configuration File. + */ + ret = t4_fw_initialize(adapter, adapter->mbox); + if (ret < 0) + goto bye; + + /* + * Return successfully and note that we're operating with parameters + * not supplied by the driver, rather than from hard-wired + * initialization constants burried in the driver. + */ + adapter->flags |= USING_SOFT_PARAMS; + dev_info(adapter->pdev_dev, "Successfully configured using Firmware "\ + "Configuration File %s, version %#x, computed checksum %#x\n", + (using_flash + ? "in device FLASH" + : "/lib/firmware/" FW_CFNAME), + finiver, cfcsum); + return 0; + + /* + * Something bad happened. Return the error ... (If the "error" + * is that there's no Configuration File on the adapter we don't + * want to issue a warning since this is fairly common.) + */ +bye: + if (ret != -ENOENT) + dev_warn(adapter->pdev_dev, "Configuration file error %d\n", + -ret); + return ret; +} + +/* + * Attempt to initialize the adapter via hard-coded, driver supplied + * parameters ... + */ +static int adap_init0_no_config(struct adapter *adapter, int reset) +{ + struct sge *s = &adapter->sge; + struct fw_caps_config_cmd caps_cmd; + u32 v; + int i, ret; + + /* + * Reset device if necessary + */ + if (reset) { + ret = t4_fw_reset(adapter, adapter->mbox, + PIORSTMODE | PIORST); + if (ret < 0) + goto bye; + } + + /* + * Get device capabilities and select which we'll be using. + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | FW_CMD_READ); + caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + if (ret < 0) + goto bye; + +#ifndef CONFIG_CHELSIO_T4_OFFLOAD + /* + * If we're a pure NIC driver then disable all offloading facilities. + * This will allow the firmware to optimize aspects of the hardware + * configuration which will result in improved performance. + */ + caps_cmd.ofldcaps = 0; + caps_cmd.iscsicaps = 0; + caps_cmd.rdmacaps = 0; + caps_cmd.fcoecaps = 0; +#endif + + if (caps_cmd.niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) { + if (!vf_acls) + caps_cmd.niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM); + else + caps_cmd.niccaps = htons(FW_CAPS_CONFIG_NIC_VM); + } else if (vf_acls) { + dev_err(adapter->pdev_dev, "virtualization ACLs not supported"); + goto bye; + } + caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | FW_CMD_WRITE); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + NULL); + if (ret < 0) + goto bye; + + /* + * Tweak configuration based on system architecture, module + * parameters, etc. + */ + ret = adap_init0_tweaks(adapter); + if (ret < 0) + goto bye; + + /* + * Select RSS Global Mode we want to use. We use "Basic Virtual" + * mode which maps each Virtual Interface to its own section of + * the RSS Table and we turn on all map and hash enables ... + */ + adapter->flags |= RSS_TNLALLLOOKUP; + ret = t4_config_glbl_rss(adapter, adapter->mbox, + FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL, + FW_RSS_GLB_CONFIG_CMD_TNLMAPEN | + FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ | + ((adapter->flags & RSS_TNLALLLOOKUP) ? + FW_RSS_GLB_CONFIG_CMD_TNLALLLKP : 0)); + if (ret < 0) + goto bye; + + /* + * Set up our own fundamental resource provisioning ... + */ + ret = t4_cfg_pfvf(adapter, adapter->mbox, adapter->fn, 0, + PFRES_NEQ, PFRES_NETHCTRL, + PFRES_NIQFLINT, PFRES_NIQ, + PFRES_TC, PFRES_NVI, + FW_PFVF_CMD_CMASK_MASK, + pfvfres_pmask(adapter, adapter->fn, 0), + PFRES_NEXACTF, + PFRES_R_CAPS, PFRES_WX_CAPS); + if (ret < 0) + goto bye; + + /* + * Perform low level SGE initialization. We need to do this before we + * send the firmware the INITIALIZE command because that will cause + * any other PF Drivers which are waiting for the Master + * Initialization to proceed forward. + */ + for (i = 0; i < SGE_NTIMERS - 1; i++) + s->timer_val[i] = min(intr_holdoff[i], MAX_SGE_TIMERVAL); + s->timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL; + s->counter_val[0] = 1; + for (i = 1; i < SGE_NCOUNTERS; i++) + s->counter_val[i] = min(intr_cnt[i - 1], + THRESHOLD_0_GET(THRESHOLD_0_MASK)); + t4_sge_init(adapter); + +#ifdef CONFIG_PCI_IOV + /* + * Provision resource limits for Virtual Functions. We currently + * grant them all the same static resource limits except for the Port + * Access Rights Mask which we're assigning based on the PF. All of + * the static provisioning stuff for both the PF and VF really needs + * to be managed in a persistent manner for each device which the + * firmware controls. + */ + { + int pf, vf; + + for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) { + if (num_vf[pf] <= 0) + continue; + + /* VF numbering starts at 1! */ + for (vf = 1; vf <= num_vf[pf]; vf++) { + ret = t4_cfg_pfvf(adapter, adapter->mbox, + pf, vf, + VFRES_NEQ, VFRES_NETHCTRL, + VFRES_NIQFLINT, VFRES_NIQ, + VFRES_TC, VFRES_NVI, + FW_PFVF_CMD_CMASK_GET( + FW_PFVF_CMD_CMASK_MASK), + pfvfres_pmask( + adapter, pf, vf), + VFRES_NEXACTF, + VFRES_R_CAPS, VFRES_WX_CAPS); + if (ret < 0) + dev_warn(adapter->pdev_dev, + "failed to "\ + "provision pf/vf=%d/%d; " + "err=%d\n", pf, vf, ret); + } + } + } +#endif + + /* + * Set up the default filter mode. Later we'll want to implement this + * via a firmware command, etc. ... This needs to be done before the + * firmare initialization command ... If the selected set of fields + * isn't equal to the default value, we'll need to make sure that the + * field selections will fit in the 36-bit budget. + */ + if (tp_vlan_pri_map != TP_VLAN_PRI_MAP_DEFAULT) { + int i, bits = 0; + + for (i = TP_VLAN_PRI_MAP_FIRST; i <= TP_VLAN_PRI_MAP_LAST; i++) + switch (tp_vlan_pri_map & (1 << i)) { + case 0: + /* compressed filter field not enabled */ + break; + case FCOE_MASK: + bits += 1; + break; + case PORT_MASK: + bits += 3; + break; + case VNIC_ID_MASK: + bits += 17; + break; + case VLAN_MASK: + bits += 17; + break; + case TOS_MASK: + bits += 8; + break; + case PROTOCOL_MASK: + bits += 8; + break; + case ETHERTYPE_MASK: + bits += 16; + break; + case MACMATCH_MASK: + bits += 9; + break; + case MPSHITTYPE_MASK: + bits += 3; + break; + case FRAGMENTATION_MASK: + bits += 1; + break; + } + + if (bits > 36) { + dev_err(adapter->pdev_dev, + "tp_vlan_pri_map=%#x needs %d bits > 36;"\ + " using %#x\n", tp_vlan_pri_map, bits, + TP_VLAN_PRI_MAP_DEFAULT); + tp_vlan_pri_map = TP_VLAN_PRI_MAP_DEFAULT; + } + } + v = tp_vlan_pri_map; + t4_write_indirect(adapter, TP_PIO_ADDR, TP_PIO_DATA, + &v, 1, TP_VLAN_PRI_MAP); + + /* + * We need Five Tuple Lookup mode to be set in TP_GLOBAL_CONFIG order + * to support any of the compressed filter fields above. Newer + * versions of the firmware do this automatically but it doesn't hurt + * to set it here. Meanwhile, we do _not_ need to set Lookup Every + * Packet in TP_INGRESS_CONFIG to support matching non-TCP packets + * since the firmware automatically turns this on and off when we have + * a non-zero number of filters active (since it does have a + * performance impact). + */ + if (tp_vlan_pri_map) + t4_set_reg_field(adapter, TP_GLOBAL_CONFIG, + FIVETUPLELOOKUP_MASK, + FIVETUPLELOOKUP_MASK); + + /* + * Tweak some settings. + */ + t4_write_reg(adapter, TP_SHIFT_CNT, SYNSHIFTMAX(6) | + RXTSHIFTMAXR1(4) | RXTSHIFTMAXR2(15) | + PERSHIFTBACKOFFMAX(8) | PERSHIFTMAX(8) | + KEEPALIVEMAXR1(4) | KEEPALIVEMAXR2(9)); + + /* + * Get basic stuff going by issuing the Firmware Initialize command. + * Note that this _must_ be after all PFVF commands ... + */ + ret = t4_fw_initialize(adapter, adapter->mbox); + if (ret < 0) + goto bye; + + /* + * Return successfully! + */ + dev_info(adapter->pdev_dev, "Successfully configured using built-in "\ + "driver parameters\n"); + return 0; + + /* + * Something bad happened. Return the error ... + */ +bye: + return ret; +} + +/* + * Phase 0 of initialization: contact FW, obtain config, perform basic init. */ static int adap_init0(struct adapter *adap) { @@ -3162,72 +3739,216 @@ static int adap_init0(struct adapter *adap) u32 v, port_vec; enum dev_state state; u32 params[7], val[7]; - struct fw_caps_config_cmd c; - - ret = t4_check_fw_version(adap); - if (ret == -EINVAL || ret > 0) { - if (upgrade_fw(adap) >= 0) /* recache FW version */ - ret = t4_check_fw_version(adap); - } - if (ret < 0) - return ret; + int reset = 1, j; - /* contact FW, request master */ - ret = t4_fw_hello(adap, adap->fn, adap->fn, MASTER_MUST, &state); + /* + * Contact FW, advertising Master capability (and potentially forcing + * ourselves as the Master PF if our module parameter force_init is + * set). + */ + ret = t4_fw_hello(adap, adap->mbox, adap->fn, + force_init ? MASTER_MUST : MASTER_MAY, + &state); if (ret < 0) { dev_err(adap->pdev_dev, "could not connect to FW, error %d\n", ret); return ret; } + if (ret == adap->mbox) + adap->flags |= MASTER_PF; + if (force_init && state == DEV_STATE_INIT) + state = DEV_STATE_UNINIT; - /* reset device */ - ret = t4_fw_reset(adap, adap->fn, PIORSTMODE | PIORST); - if (ret < 0) - goto bye; - - for (v = 0; v < SGE_NTIMERS - 1; v++) - adap->sge.timer_val[v] = min(intr_holdoff[v], MAX_SGE_TIMERVAL); - adap->sge.timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL; - adap->sge.counter_val[0] = 1; - for (v = 1; v < SGE_NCOUNTERS; v++) - adap->sge.counter_val[v] = min(intr_cnt[v - 1], - THRESHOLD_3_MASK); -#define FW_PARAM_DEV(param) \ - (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \ - FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param)) + /* + * If we're the Master PF Driver and the device is uninitialized, + * then let's consider upgrading the firmware ... (We always want + * to check the firmware version number in order to A. get it for + * later reporting and B. to warn if the currently loaded firmware + * is excessively mismatched relative to the driver.) + */ + ret = t4_check_fw_version(adap); + if ((adap->flags & MASTER_PF) && state != DEV_STATE_INIT) { + if (ret == -EINVAL || ret > 0) { + if (upgrade_fw(adap) >= 0) { + /* + * Note that the chip was reset as part of the + * firmware upgrade so we don't reset it again + * below and grab the new firmware version. + */ + reset = 0; + ret = t4_check_fw_version(adap); + } + } + if (ret < 0) + return ret; + } - params[0] = FW_PARAM_DEV(CCLK); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 1, params, val); + /* + * Grab VPD parameters. This should be done after we establish a + * connection to the firmware since some of the VPD parameters + * (notably the Core Clock frequency) are retrieved via requests to + * the firmware. On the other hand, we need these fairly early on + * so we do this right after getting ahold of the firmware. + */ + ret = get_vpd_params(adap, &adap->params.vpd); if (ret < 0) goto bye; - adap->params.vpd.cclk = val[0]; - ret = adap_init1(adap, &c); + /* + * Find out what ports are available to us. Note that we need to do + * this before calling adap_init0_no_config() since it needs nports + * and portvec ... + */ + v = + FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_PORTVEC); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1, &v, &port_vec); if (ret < 0) goto bye; + adap->params.nports = hweight32(port_vec); + adap->params.portvec = port_vec; + + /* + * If the firmware is initialized already (and we're not forcing a + * master initialization), note that we're living with existing + * adapter parameters. Otherwise, it's time to try initializing the + * adapter ... + */ + if (state == DEV_STATE_INIT) { + dev_info(adap->pdev_dev, "Coming up as %s: "\ + "Adapter already initialized\n", + adap->flags & MASTER_PF ? "MASTER" : "SLAVE"); + adap->flags |= USING_SOFT_PARAMS; + } else { + dev_info(adap->pdev_dev, "Coming up as MASTER: "\ + "Initializing adapter\n"); + + /* + * If the firmware doesn't support Configuration + * Files warn user and exit, + */ + if (ret < 0) + dev_warn(adap->pdev_dev, "Firmware doesn't support " + "configuration file.\n"); + if (force_old_init) + ret = adap_init0_no_config(adap, reset); + else { + /* + * Find out whether we're dealing with a version of + * the firmware which has configuration file support. + */ + params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF)); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1, + params, val); + + /* + * If the firmware doesn't support Configuration + * Files, use the old Driver-based, hard-wired + * initialization. Otherwise, try using the + * Configuration File support and fall back to the + * Driver-based initialization if there's no + * Configuration File found. + */ + if (ret < 0) + ret = adap_init0_no_config(adap, reset); + else { + /* + * The firmware provides us with a memory + * buffer where we can load a Configuration + * File from the host if we want to override + * the Configuration File in flash. + */ + + ret = adap_init0_config(adap, reset); + if (ret == -ENOENT) { + dev_info(adap->pdev_dev, + "No Configuration File present " + "on adapter. Using hard-wired " + "configuration parameters.\n"); + ret = adap_init0_no_config(adap, reset); + } + } + } + if (ret < 0) { + dev_err(adap->pdev_dev, + "could not initialize adapter, error %d\n", + -ret); + goto bye; + } + } + + /* + * If we're living with non-hard-coded parameters (either from a + * Firmware Configuration File or values programmed by a different PF + * Driver), give the SGE code a chance to pull in anything that it + * needs ... Note that this must be called after we retrieve our VPD + * parameters in order to know how to convert core ticks to seconds. + */ + if (adap->flags & USING_SOFT_PARAMS) { + ret = t4_sge_init(adap); + if (ret < 0) + goto bye; + } + + /* + * Grab some of our basic fundamental operating parameters. + */ +#define FW_PARAM_DEV(param) \ + (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \ + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param)) + #define FW_PARAM_PFVF(param) \ - (FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \ - FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param) | \ - FW_PARAMS_PARAM_Y(adap->fn)) + FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \ + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param)| \ + FW_PARAMS_PARAM_Y(0) | \ + FW_PARAMS_PARAM_Z(0) - params[0] = FW_PARAM_DEV(PORTVEC); + params[0] = FW_PARAM_PFVF(EQ_START); params[1] = FW_PARAM_PFVF(L2T_START); params[2] = FW_PARAM_PFVF(L2T_END); params[3] = FW_PARAM_PFVF(FILTER_START); params[4] = FW_PARAM_PFVF(FILTER_END); params[5] = FW_PARAM_PFVF(IQFLINT_START); - params[6] = FW_PARAM_PFVF(EQ_START); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 7, params, val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, params, val); if (ret < 0) goto bye; - port_vec = val[0]; + adap->sge.egr_start = val[0]; + adap->l2t_start = val[1]; + adap->l2t_end = val[2]; adap->tids.ftid_base = val[3]; adap->tids.nftids = val[4] - val[3] + 1; adap->sge.ingr_start = val[5]; - adap->sge.egr_start = val[6]; - if (c.ofldcaps) { + /* query params related to active filter region */ + params[0] = FW_PARAM_PFVF(ACTIVE_FILTER_START); + params[1] = FW_PARAM_PFVF(ACTIVE_FILTER_END); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, params, val); + /* If Active filter size is set we enable establishing + * offload connection through firmware work request + */ + if ((val[0] != val[1]) && (ret >= 0)) { + adap->flags |= FW_OFLD_CONN; + adap->tids.aftid_base = val[0]; + adap->tids.aftid_end = val[1]; + } + +#ifdef CONFIG_CHELSIO_T4_OFFLOAD + /* + * Get device capabilities so we can determine what resources we need + * to manage. + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | FW_CMD_READ); + caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + if (ret < 0) + goto bye; + + if (caps_cmd.ofldcaps) { /* query offload-related parameters */ params[0] = FW_PARAM_DEV(NTID); params[1] = FW_PARAM_PFVF(SERVER_START); @@ -3235,28 +3956,55 @@ static int adap_init0(struct adapter *adap) params[3] = FW_PARAM_PFVF(TDDP_START); params[4] = FW_PARAM_PFVF(TDDP_END); params[5] = FW_PARAM_DEV(FLOWC_BUFFIFO_SZ); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, - val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, + params, val); if (ret < 0) goto bye; adap->tids.ntids = val[0]; adap->tids.natids = min(adap->tids.ntids / 2, MAX_ATIDS); adap->tids.stid_base = val[1]; adap->tids.nstids = val[2] - val[1] + 1; + /* + * Setup server filter region. Divide the availble filter + * region into two parts. Regular filters get 1/3rd and server + * filters get 2/3rd part. This is only enabled if workarond + * path is enabled. + * 1. For regular filters. + * 2. Server filter: This are special filters which are used + * to redirect SYN packets to offload queue. + */ + if (adap->flags & FW_OFLD_CONN && !is_bypass(adap)) { + adap->tids.sftid_base = adap->tids.ftid_base + + DIV_ROUND_UP(adap->tids.nftids, 3); + adap->tids.nsftids = adap->tids.nftids - + DIV_ROUND_UP(adap->tids.nftids, 3); + adap->tids.nftids = adap->tids.sftid_base - + adap->tids.ftid_base; + } adap->vres.ddp.start = val[3]; adap->vres.ddp.size = val[4] - val[3] + 1; adap->params.ofldq_wr_cred = val[5]; + + params[0] = FW_PARAM_PFVF(ETHOFLD_START); + params[1] = FW_PARAM_PFVF(ETHOFLD_END); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, + params, val); + if ((val[0] != val[1]) && (ret >= 0)) { + adap->tids.uotid_base = val[0]; + adap->tids.nuotids = val[1] - val[0] + 1; + } + adap->params.offload = 1; } - if (c.rdmacaps) { + if (caps_cmd.rdmacaps) { params[0] = FW_PARAM_PFVF(STAG_START); params[1] = FW_PARAM_PFVF(STAG_END); params[2] = FW_PARAM_PFVF(RQ_START); params[3] = FW_PARAM_PFVF(RQ_END); params[4] = FW_PARAM_PFVF(PBL_START); params[5] = FW_PARAM_PFVF(PBL_END); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, - val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, + params, val); if (ret < 0) goto bye; adap->vres.stag.start = val[0]; @@ -3272,8 +4020,7 @@ static int adap_init0(struct adapter *adap) params[3] = FW_PARAM_PFVF(CQ_END); params[4] = FW_PARAM_PFVF(OCQ_START); params[5] = FW_PARAM_PFVF(OCQ_END); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, - val); + ret = t4_query_params(adap, 0, 0, 0, 6, params, val); if (ret < 0) goto bye; adap->vres.qp.start = val[0]; @@ -3283,11 +4030,11 @@ static int adap_init0(struct adapter *adap) adap->vres.ocq.start = val[4]; adap->vres.ocq.size = val[5] - val[4] + 1; } - if (c.iscsicaps) { + if (caps_cmd.iscsicaps) { params[0] = FW_PARAM_PFVF(ISCSI_START); params[1] = FW_PARAM_PFVF(ISCSI_END); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 2, params, - val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, + params, val); if (ret < 0) goto bye; adap->vres.iscsi.start = val[0]; @@ -3295,63 +4042,33 @@ static int adap_init0(struct adapter *adap) } #undef FW_PARAM_PFVF #undef FW_PARAM_DEV +#endif /* CONFIG_CHELSIO_T4_OFFLOAD */ - adap->params.nports = hweight32(port_vec); - adap->params.portvec = port_vec; - adap->flags |= FW_OK; - - /* These are finalized by FW initialization, load their values now */ + /* + * These are finalized by FW initialization, load their values now. + */ v = t4_read_reg(adap, TP_TIMER_RESOLUTION); adap->params.tp.tre = TIMERRESOLUTION_GET(v); + adap->params.tp.dack_re = DELAYEDACKRESOLUTION_GET(v); t4_read_mtu_tbl(adap, adap->params.mtus, NULL); t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd, adap->params.b_wnd); -#ifdef CONFIG_PCI_IOV - /* - * Provision resource limits for Virtual Functions. We currently - * grant them all the same static resource limits except for the Port - * Access Rights Mask which we're assigning based on the PF. All of - * the static provisioning stuff for both the PF and VF really needs - * to be managed in a persistent manner for each device which the - * firmware controls. - */ - { - int pf, vf; - - for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) { - if (num_vf[pf] <= 0) - continue; + /* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */ + for (j = 0; j < NCHAN; j++) + adap->params.tp.tx_modq[j] = j; - /* VF numbering starts at 1! */ - for (vf = 1; vf <= num_vf[pf]; vf++) { - ret = t4_cfg_pfvf(adap, adap->fn, pf, vf, - VFRES_NEQ, VFRES_NETHCTRL, - VFRES_NIQFLINT, VFRES_NIQ, - VFRES_TC, VFRES_NVI, - FW_PFVF_CMD_CMASK_MASK, - pfvfres_pmask(adap, pf, vf), - VFRES_NEXACTF, - VFRES_R_CAPS, VFRES_WX_CAPS); - if (ret < 0) - dev_warn(adap->pdev_dev, "failed to " - "provision pf/vf=%d/%d; " - "err=%d\n", pf, vf, ret); - } - } - } -#endif - - setup_memwin(adap); + adap->flags |= FW_OK; return 0; /* - * If a command timed out or failed with EIO FW does not operate within - * its spec or something catastrophic happened to HW/FW, stop issuing - * commands. + * Something bad happened. If a command timed out or failed with EIO + * FW does not operate within its spec or something catastrophic + * happened to HW/FW, stop issuing commands. */ -bye: if (ret != -ETIMEDOUT && ret != -EIO) - t4_fw_bye(adap, adap->fn); +bye: + if (ret != -ETIMEDOUT && ret != -EIO) + t4_fw_bye(adap, adap->mbox); return ret; } @@ -3806,7 +4523,9 @@ static int __devinit init_one(struct pci_dev *pdev, err = t4_prep_adapter(adapter); if (err) goto out_unmap_bar; + setup_memwin(adapter); err = adap_init0(adapter); + setup_memwin_rdma(adapter); if (err) goto out_unmap_bar; @@ -3948,8 +4667,11 @@ static void __devexit remove_one(struct pci_dev *pdev) { struct adapter *adapter = pci_get_drvdata(pdev); +#ifdef CONFIG_PCI_IOV pci_disable_sriov(pdev); +#endif + if (adapter) { int i; |
