diff options
Diffstat (limited to 'drivers/net/ethernet/allwinner')
| -rw-r--r-- | drivers/net/ethernet/allwinner/Kconfig | 36 | ||||
| -rw-r--r-- | drivers/net/ethernet/allwinner/Makefile | 5 | ||||
| -rw-r--r-- | drivers/net/ethernet/allwinner/sun4i-emac.c | 960 | ||||
| -rw-r--r-- | drivers/net/ethernet/allwinner/sun4i-emac.h | 108 |
4 files changed, 1109 insertions, 0 deletions
diff --git a/drivers/net/ethernet/allwinner/Kconfig b/drivers/net/ethernet/allwinner/Kconfig new file mode 100644 index 0000000..66d3532 --- /dev/null +++ b/drivers/net/ethernet/allwinner/Kconfig @@ -0,0 +1,36 @@ +# +# Allwinner device configuration +# + +config NET_VENDOR_ALLWINNER + bool "Allwinner devices" + default y + depends on ARCH_SUNXI + ---help--- + If you have a network (Ethernet) card belonging to this + class, say Y and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly + affect the kernel: saying N will just cause the configurator + to skip all the questions about Allwinner cards. If you say Y, + you will be asked for your specific card in the following + questions. + +if NET_VENDOR_ALLWINNER + +config SUN4I_EMAC + tristate "Allwinner A10 EMAC support" + depends on ARCH_SUNXI + depends on OF + select CRC32 + select NET_CORE + select MII + select PHYLIB + ---help--- + Support for Allwinner A10 EMAC ethernet driver. + + To compile this driver as a module, choose M here. The module + will be called sun4i-emac. + +endif # NET_VENDOR_ALLWINNER diff --git a/drivers/net/ethernet/allwinner/Makefile b/drivers/net/ethernet/allwinner/Makefile new file mode 100644 index 0000000..03129f7 --- /dev/null +++ b/drivers/net/ethernet/allwinner/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Allwinner device drivers. +# + +obj-$(CONFIG_SUN4I_EMAC) += sun4i-emac.o diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c new file mode 100644 index 0000000..b411344 --- /dev/null +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c @@ -0,0 +1,960 @@ +/* + * Allwinner EMAC Fast Ethernet driver for Linux. + * + * Copyright 2012-2013 Stefan Roese <sr@denx.de> + * Copyright 2013 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * Based on the Linux driver provided by Allwinner: + * Copyright (C) 1997 Sten Wang + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/mii.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_mdio.h> +#include <linux/of_net.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/phy.h> + +#include "sun4i-emac.h" + +#define DRV_NAME "sun4i-emac" +#define DRV_VERSION "1.02" + +#define EMAC_MAX_FRAME_LEN 0x0600 + +/* Transmit timeout, default 5 seconds. */ +static int watchdog = 5000; +module_param(watchdog, int, 0400); +MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); + +/* EMAC register address locking. + * + * The EMAC uses an address register to control where data written + * to the data register goes. This means that the address register + * must be preserved over interrupts or similar calls. + * + * During interrupt and other critical calls, a spinlock is used to + * protect the system, but the calls themselves save the address + * in the address register in case they are interrupting another + * access to the device. + * + * For general accesses a lock is provided so that calls which are + * allowed to sleep are serialised so that the address register does + * not need to be saved. This lock also serves to serialise access + * to the EEPROM and PHY access registers which are shared between + * these two devices. + */ + +/* The driver supports the original EMACE, and now the two newer + * devices, EMACA and EMACB. + */ + +struct emac_board_info { + struct clk *clk; + struct device *dev; + struct platform_device *pdev; + spinlock_t lock; + void __iomem *membase; + u32 msg_enable; + struct net_device *ndev; + struct sk_buff *skb_last; + u16 tx_fifo_stat; + + int emacrx_completed_flag; + + struct phy_device *phy_dev; + struct device_node *phy_node; + unsigned int link; + unsigned int speed; + unsigned int duplex; + + phy_interface_t phy_interface; +}; + +static void emac_update_speed(struct net_device *dev) +{ + struct emac_board_info *db = netdev_priv(dev); + unsigned int reg_val; + + /* set EMAC SPEED, depend on PHY */ + reg_val = readl(db->membase + EMAC_MAC_SUPP_REG); + reg_val &= ~(0x1 << 8); + if (db->speed == SPEED_100) + reg_val |= 1 << 8; + writel(reg_val, db->membase + EMAC_MAC_SUPP_REG); +} + +static void emac_update_duplex(struct net_device *dev) +{ + struct emac_board_info *db = netdev_priv(dev); + unsigned int reg_val; + + /* set duplex depend on phy */ + reg_val = readl(db->membase + EMAC_MAC_CTL1_REG); + reg_val &= ~EMAC_MAC_CTL1_DUPLEX_EN; + if (db->duplex) + reg_val |= EMAC_MAC_CTL1_DUPLEX_EN; + writel(reg_val, db->membase + EMAC_MAC_CTL1_REG); +} + +static void emac_handle_link_change(struct net_device *dev) +{ + struct emac_board_info *db = netdev_priv(dev); + struct phy_device *phydev = db->phy_dev; + unsigned long flags; + int status_change = 0; + + if (phydev->link) { + if (db->speed != phydev->speed) { + spin_lock_irqsave(&db->lock, flags); + db->speed = phydev->speed; + emac_update_speed(dev); + spin_unlock_irqrestore(&db->lock, flags); + status_change = 1; + } + + if (db->duplex != phydev->duplex) { + spin_lock_irqsave(&db->lock, flags); + db->duplex = phydev->duplex; + emac_update_duplex(dev); + spin_unlock_irqrestore(&db->lock, flags); + status_change = 1; + } + } + + if (phydev->link != db->link) { + if (!phydev->link) { + db->speed = 0; + db->duplex = -1; + } + db->link = phydev->link; + + status_change = 1; + } + + if (status_change) + phy_print_status(phydev); +} + +static int emac_mdio_probe(struct net_device *dev) +{ + struct emac_board_info *db = netdev_priv(dev); + + /* to-do: PHY interrupts are currently not supported */ + + /* attach the mac to the phy */ + db->phy_dev = of_phy_connect(db->ndev, db->phy_node, + &emac_handle_link_change, 0, + db->phy_interface); + if (!db->phy_dev) { + netdev_err(db->ndev, "could not find the PHY\n"); + return -ENODEV; + } + + /* mask with MAC supported features */ + db->phy_dev->supported &= PHY_BASIC_FEATURES; + db->phy_dev->advertising = db->phy_dev->supported; + + db->link = 0; + db->speed = 0; + db->duplex = -1; + + return 0; +} + +static void emac_mdio_remove(struct net_device *dev) +{ + struct emac_board_info *db = netdev_priv(dev); + + phy_disconnect(db->phy_dev); + db->phy_dev = NULL; +} + +static void emac_reset(struct emac_board_info *db) +{ + dev_dbg(db->dev, "resetting device\n"); + + /* RESET device */ + writel(0, db->membase + EMAC_CTL_REG); + udelay(200); + writel(EMAC_CTL_RESET, db->membase + EMAC_CTL_REG); + udelay(200); +} + +static void emac_outblk_32bit(void __iomem *reg, void *data, int count) +{ + writesl(reg, data, round_up(count, 4) / 4); +} + +static void emac_inblk_32bit(void __iomem *reg, void *data, int count) +{ + readsl(reg, data, round_up(count, 4) / 4); +} + +static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct emac_board_info *dm = netdev_priv(dev); + struct phy_device *phydev = dm->phy_dev; + + if (!netif_running(dev)) + return -EINVAL; + + if (!phydev) + return -ENODEV; + + return phy_mii_ioctl(phydev, rq, cmd); +} + +/* ethtool ops */ +static void emac_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strlcpy(info->driver, DRV_NAME, sizeof(DRV_NAME)); + strlcpy(info->version, DRV_VERSION, sizeof(DRV_VERSION)); + strlcpy(info->bus_info, dev_name(&dev->dev), sizeof(info->bus_info)); +} + +static int emac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct emac_board_info *dm = netdev_priv(dev); + struct phy_device *phydev = dm->phy_dev; + + if (!phydev) + return -ENODEV; + + return phy_ethtool_gset(phydev, cmd); +} + +static int emac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct emac_board_info *dm = netdev_priv(dev); + struct phy_device *phydev = dm->phy_dev; + + if (!phydev) + return -ENODEV; + + return phy_ethtool_sset(phydev, cmd); +} + +static const struct ethtool_ops emac_ethtool_ops = { + .get_drvinfo = emac_get_drvinfo, + .get_settings = emac_get_settings, + .set_settings = emac_set_settings, + .get_link = ethtool_op_get_link, +}; + +unsigned int emac_setup(struct net_device *ndev) +{ + struct emac_board_info *db = netdev_priv(ndev); + unsigned int reg_val; + + /* set up TX */ + reg_val = readl(db->membase + EMAC_TX_MODE_REG); + + writel(reg_val | EMAC_TX_MODE_ABORTED_FRAME_EN, + db->membase + EMAC_TX_MODE_REG); + + /* set up RX */ + reg_val = readl(db->membase + EMAC_RX_CTL_REG); + + writel(reg_val | EMAC_RX_CTL_PASS_LEN_OOR_EN | + EMAC_RX_CTL_ACCEPT_UNICAST_EN | EMAC_RX_CTL_DA_FILTER_EN | + EMAC_RX_CTL_ACCEPT_MULTICAST_EN | + EMAC_RX_CTL_ACCEPT_BROADCAST_EN, + db->membase + EMAC_RX_CTL_REG); + + /* set MAC */ + /* set MAC CTL0 */ + reg_val = readl(db->membase + EMAC_MAC_CTL0_REG); + writel(reg_val | EMAC_MAC_CTL0_RX_FLOW_CTL_EN | + EMAC_MAC_CTL0_TX_FLOW_CTL_EN, + db->membase + EMAC_MAC_CTL0_REG); + + /* set MAC CTL1 */ + reg_val = readl(db->membase + EMAC_MAC_CTL1_REG); + reg_val |= EMAC_MAC_CTL1_LEN_CHECK_EN; + reg_val |= EMAC_MAC_CTL1_CRC_EN; + reg_val |= EMAC_MAC_CTL1_PAD_EN; + writel(reg_val, db->membase + EMAC_MAC_CTL1_REG); + + /* set up IPGT */ + writel(EMAC_MAC_IPGT_FULL_DUPLEX, db->membase + EMAC_MAC_IPGT_REG); + + /* set up IPGR */ + writel((EMAC_MAC_IPGR_IPG1 << 8) | EMAC_MAC_IPGR_IPG2, + db->membase + EMAC_MAC_IPGR_REG); + + /* set up Collison window */ + writel((EMAC_MAC_CLRT_COLLISION_WINDOW << 8) | EMAC_MAC_CLRT_RM, + db->membase + EMAC_MAC_CLRT_REG); + + /* set up Max Frame Length */ + writel(EMAC_MAX_FRAME_LEN, + db->membase + EMAC_MAC_MAXF_REG); + + return 0; +} + +unsigned int emac_powerup(struct net_device *ndev) +{ + struct emac_board_info *db = netdev_priv(ndev); + unsigned int reg_val; + + /* initial EMAC */ + /* flush RX FIFO */ + reg_val = readl(db->membase + EMAC_RX_CTL_REG); + reg_val |= 0x8; + writel(reg_val, db->membase + EMAC_RX_CTL_REG); + udelay(1); + + /* initial MAC */ + /* soft reset MAC */ + reg_val = readl(db->membase + EMAC_MAC_CTL0_REG); + reg_val &= ~EMAC_MAC_CTL0_SOFT_RESET; + writel(reg_val, db->membase + EMAC_MAC_CTL0_REG); + + /* set MII clock */ + reg_val = readl(db->membase + EMAC_MAC_MCFG_REG); + reg_val &= (~(0xf << 2)); + reg_val |= (0xD << 2); + writel(reg_val, db->membase + EMAC_MAC_MCFG_REG); + + /* clear RX counter */ + writel(0x0, db->membase + EMAC_RX_FBC_REG); + + /* disable all interrupt and clear interrupt status */ + writel(0, db->membase + EMAC_INT_CTL_REG); + reg_val = readl(db->membase + EMAC_INT_STA_REG); + writel(reg_val, db->membase + EMAC_INT_STA_REG); + + udelay(1); + + /* set up EMAC */ + emac_setup(ndev); + + /* set mac_address to chip */ + writel(ndev->dev_addr[0] << 16 | ndev->dev_addr[1] << 8 | ndev-> + dev_addr[2], db->membase + EMAC_MAC_A1_REG); + writel(ndev->dev_addr[3] << 16 | ndev->dev_addr[4] << 8 | ndev-> + dev_addr[5], db->membase + EMAC_MAC_A0_REG); + + mdelay(1); + + return 0; +} + +static int emac_set_mac_address(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + struct emac_board_info *db = netdev_priv(dev); + + if (netif_running(dev)) + return -EBUSY; + + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); + + writel(dev->dev_addr[0] << 16 | dev->dev_addr[1] << 8 | dev-> + dev_addr[2], db->membase + EMAC_MAC_A1_REG); + writel(dev->dev_addr[3] << 16 | dev->dev_addr[4] << 8 | dev-> + dev_addr[5], db->membase + EMAC_MAC_A0_REG); + + return 0; +} + +/* Initialize emac board */ +static void emac_init_device(struct net_device *dev) +{ + struct emac_board_info *db = netdev_priv(dev); + unsigned long flags; + unsigned int reg_val; + + spin_lock_irqsave(&db->lock, flags); + + emac_update_speed(dev); + emac_update_duplex(dev); + + /* enable RX/TX */ + reg_val = readl(db->membase + EMAC_CTL_REG); + writel(reg_val | EMAC_CTL_RESET | EMAC_CTL_TX_EN | EMAC_CTL_RX_EN, + db->membase + EMAC_CTL_REG); + + /* enable RX/TX0/RX Hlevel interrup */ + reg_val = readl(db->membase + EMAC_INT_CTL_REG); + reg_val |= (0xf << 0) | (0x01 << 8); + writel(reg_val, db->membase + EMAC_INT_CTL_REG); + + spin_unlock_irqrestore(&db->lock, flags); +} + +/* Our watchdog timed out. Called by the networking layer */ +static void emac_timeout(struct net_device *dev) +{ + struct emac_board_info *db = netdev_priv(dev); + unsigned long flags; + + if (netif_msg_timer(db)) + dev_err(db->dev, "tx time out.\n"); + + /* Save previous register address */ + spin_lock_irqsave(&db->lock, flags); + + netif_stop_queue(dev); + emac_reset(db); + emac_init_device(dev); + /* We can accept TX packets again */ + dev->trans_start = jiffies; + netif_wake_queue(dev); + + /* Restore previous register address */ + spin_unlock_irqrestore(&db->lock, flags); +} + +/* Hardware start transmission. + * Send a packet to media from the upper layer. + */ +static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct emac_board_info *db = netdev_priv(dev); + unsigned long channel; + unsigned long flags; + + channel = db->tx_fifo_stat & 3; + if (channel == 3) + return 1; + + channel = (channel == 1 ? 1 : 0); + + spin_lock_irqsave(&db->lock, flags); + + writel(channel, db->membase + EMAC_TX_INS_REG); + + emac_outblk_32bit(db->membase + EMAC_TX_IO_DATA_REG, + skb->data, skb->len); + dev->stats.tx_bytes += skb->len; + + db->tx_fifo_stat |= 1 << channel; + /* TX control: First packet immediately send, second packet queue */ + if (channel == 0) { + /* set TX len */ + writel(skb->len, db->membase + EMAC_TX_PL0_REG); + /* start translate from fifo to phy */ + writel(readl(db->membase + EMAC_TX_CTL0_REG) | 1, + db->membase + EMAC_TX_CTL0_REG); + + /* save the time stamp */ + dev->trans_start = jiffies; + } else if (channel == 1) { + /* set TX len */ + writel(skb->len, db->membase + EMAC_TX_PL1_REG); + /* start translate from fifo to phy */ + writel(readl(db->membase + EMAC_TX_CTL1_REG) | 1, + db->membase + EMAC_TX_CTL1_REG); + + /* save the time stamp */ + dev->trans_start = jiffies; + } + + if ((db->tx_fifo_stat & 3) == 3) { + /* Second packet */ + netif_stop_queue(dev); + } + + spin_unlock_irqrestore(&db->lock, flags); + + /* free this SKB */ + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + +/* EMAC interrupt handler + * receive the packet to upper layer, free the transmitted packet + */ +static void emac_tx_done(struct net_device *dev, struct emac_board_info *db, + unsigned int tx_status) +{ + /* One packet sent complete */ + db->tx_fifo_stat &= ~(tx_status & 3); + if (3 == (tx_status & 3)) + dev->stats.tx_packets += 2; + else + dev->stats.tx_packets++; + + if (netif_msg_tx_done(db)) + dev_dbg(db->dev, "tx done, NSR %02x\n", tx_status); + + netif_wake_queue(dev); +} + +/* Received a packet and pass to upper layer + */ +static void emac_rx(struct net_device *dev) +{ + struct emac_board_info *db = netdev_priv(dev); + struct sk_buff *skb; + u8 *rdptr; + bool good_packet; + static int rxlen_last; + unsigned int reg_val; + u32 rxhdr, rxstatus, rxcount, rxlen; + + /* Check packet ready or not */ + while (1) { + /* race warning: the first packet might arrive with + * the interrupts disabled, but the second will fix + * it + */ + rxcount = readl(db->membase + EMAC_RX_FBC_REG); + + if (netif_msg_rx_status(db)) + dev_dbg(db->dev, "RXCount: %x\n", rxcount); + + if ((db->skb_last != NULL) && (rxlen_last > 0)) { + dev->stats.rx_bytes += rxlen_last; + + /* Pass to upper layer */ + db->skb_last->protocol = eth_type_trans(db->skb_last, + dev); + netif_rx(db->skb_last); + dev->stats.rx_packets++; + db->skb_last = NULL; + rxlen_last = 0; + + reg_val = readl(db->membase + EMAC_RX_CTL_REG); + reg_val &= ~EMAC_RX_CTL_DMA_EN; + writel(reg_val, db->membase + EMAC_RX_CTL_REG); + } + + if (!rxcount) { + db->emacrx_completed_flag = 1; + reg_val = readl(db->membase + EMAC_INT_CTL_REG); + reg_val |= (0xf << 0) | (0x01 << 8); + writel(reg_val, db->membase + EMAC_INT_CTL_REG); + + /* had one stuck? */ + rxcount = readl(db->membase + EMAC_RX_FBC_REG); + if (!rxcount) + return; + } + + reg_val = readl(db->membase + EMAC_RX_IO_DATA_REG); + if (netif_msg_rx_status(db)) + dev_dbg(db->dev, "receive header: %x\n", reg_val); + if (reg_val != EMAC_UNDOCUMENTED_MAGIC) { + /* disable RX */ + reg_val = readl(db->membase + EMAC_CTL_REG); + writel(reg_val & ~EMAC_CTL_RX_EN, + db->membase + EMAC_CTL_REG); + + /* Flush RX FIFO */ + reg_val = readl(db->membase + EMAC_RX_CTL_REG); + writel(reg_val | (1 << 3), + db->membase + EMAC_RX_CTL_REG); + + do { + reg_val = readl(db->membase + EMAC_RX_CTL_REG); + } while (reg_val & (1 << 3)); + + /* enable RX */ + reg_val = readl(db->membase + EMAC_CTL_REG); + writel(reg_val | EMAC_CTL_RX_EN, + db->membase + EMAC_CTL_REG); + reg_val = readl(db->membase + EMAC_INT_CTL_REG); + reg_val |= (0xf << 0) | (0x01 << 8); + writel(reg_val, db->membase + EMAC_INT_CTL_REG); + + db->emacrx_completed_flag = 1; + + return; + } + + /* A packet ready now & Get status/length */ + good_packet = true; + + emac_inblk_32bit(db->membase + EMAC_RX_IO_DATA_REG, + &rxhdr, sizeof(rxhdr)); + + if (netif_msg_rx_status(db)) + dev_dbg(db->dev, "rxhdr: %x\n", *((int *)(&rxhdr))); + + rxlen = EMAC_RX_IO_DATA_LEN(rxhdr); + rxstatus = EMAC_RX_IO_DATA_STATUS(rxhdr); + + if (netif_msg_rx_status(db)) + dev_dbg(db->dev, "RX: status %02x, length %04x\n", + rxstatus, rxlen); + + /* Packet Status check */ + if (rxlen < 0x40) { + good_packet = false; + if (netif_msg_rx_err(db)) + dev_dbg(db->dev, "RX: Bad Packet (runt)\n"); + } + + if (unlikely(!(rxstatus & EMAC_RX_IO_DATA_STATUS_OK))) { + good_packet = false; + + if (rxstatus & EMAC_RX_IO_DATA_STATUS_CRC_ERR) { + if (netif_msg_rx_err(db)) + dev_dbg(db->dev, "crc error\n"); + dev->stats.rx_crc_errors++; + } + + if (rxstatus & EMAC_RX_IO_DATA_STATUS_LEN_ERR) { + if (netif_msg_rx_err(db)) + dev_dbg(db->dev, "length error\n"); + dev->stats.rx_length_errors++; + } + } + + /* Move data from EMAC */ + skb = dev_alloc_skb(rxlen + 4); + if (good_packet && skb) { + skb_reserve(skb, 2); + rdptr = (u8 *) skb_put(skb, rxlen - 4); + + /* Read received packet from RX SRAM */ + if (netif_msg_rx_status(db)) + dev_dbg(db->dev, "RxLen %x\n", rxlen); + + emac_inblk_32bit(db->membase + EMAC_RX_IO_DATA_REG, + rdptr, rxlen); + dev->stats.rx_bytes += rxlen; + + /* Pass to upper layer */ + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + } + } +} + +static irqreturn_t emac_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct emac_board_info *db = netdev_priv(dev); + int int_status; + unsigned long flags; + unsigned int reg_val; + + /* A real interrupt coming */ + + /* holders of db->lock must always block IRQs */ + spin_lock_irqsave(&db->lock, flags); + + /* Disable all interrupts */ + writel(0, db->membase + EMAC_INT_CTL_REG); + + /* Got EMAC interrupt status */ + /* Got ISR */ + int_status = readl(db->membase + EMAC_INT_STA_REG); + /* Clear ISR status */ + writel(int_status, db->membase + EMAC_INT_STA_REG); + + if (netif_msg_intr(db)) + dev_dbg(db->dev, "emac interrupt %02x\n", int_status); + + /* Received the coming packet */ + if ((int_status & 0x100) && (db->emacrx_completed_flag == 1)) { + /* carrier lost */ + db->emacrx_completed_flag = 0; + emac_rx(dev); + } + + /* Transmit Interrupt check */ + if (int_status & (0x01 | 0x02)) + emac_tx_done(dev, db, int_status); + + if (int_status & (0x04 | 0x08)) + netdev_info(dev, " ab : %x\n", int_status); + + /* Re-enable interrupt mask */ + if (db->emacrx_completed_flag == 1) { + reg_val = readl(db->membase + EMAC_INT_CTL_REG); + reg_val |= (0xf << 0) | (0x01 << 8); + writel(reg_val, db->membase + EMAC_INT_CTL_REG); + } + spin_unlock_irqrestore(&db->lock, flags); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Used by netconsole + */ +static void emac_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + emac_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +/* Open the interface. + * The interface is opened whenever "ifconfig" actives it. + */ +static int emac_open(struct net_device *dev) +{ + struct emac_board_info *db = netdev_priv(dev); + int ret; + + if (netif_msg_ifup(db)) + dev_dbg(db->dev, "enabling %s\n", dev->name); + + if (devm_request_irq(db->dev, dev->irq, &emac_interrupt, + 0, dev->name, dev)) + return -EAGAIN; + + /* Initialize EMAC board */ + emac_reset(db); + emac_init_device(dev); + + ret = emac_mdio_probe(dev); + if (ret < 0) { + netdev_err(dev, "cannot probe MDIO bus\n"); + return ret; + } + + phy_start(db->phy_dev); + netif_start_queue(dev); + + return 0; +} + +static void emac_shutdown(struct net_device *dev) +{ + unsigned int reg_val; + struct emac_board_info *db = netdev_priv(dev); + + /* Disable all interrupt */ + writel(0, db->membase + EMAC_INT_CTL_REG); + + /* clear interupt status */ + reg_val = readl(db->membase + EMAC_INT_STA_REG); + writel(reg_val, db->membase + EMAC_INT_STA_REG); + + /* Disable RX/TX */ + reg_val = readl(db->membase + EMAC_CTL_REG); + reg_val &= ~(EMAC_CTL_TX_EN | EMAC_CTL_RX_EN | EMAC_CTL_RESET); + writel(reg_val, db->membase + EMAC_CTL_REG); +} + +/* Stop the interface. + * The interface is stopped when it is brought. + */ +static int emac_stop(struct net_device *ndev) +{ + struct emac_board_info *db = netdev_priv(ndev); + + if (netif_msg_ifdown(db)) + dev_dbg(db->dev, "shutting down %s\n", ndev->name); + + netif_stop_queue(ndev); + netif_carrier_off(ndev); + + phy_stop(db->phy_dev); + + emac_mdio_remove(ndev); + + emac_shutdown(ndev); + + return 0; +} + +static const struct net_device_ops emac_netdev_ops = { + .ndo_open = emac_open, + .ndo_stop = emac_stop, + .ndo_start_xmit = emac_start_xmit, + .ndo_tx_timeout = emac_timeout, + .ndo_do_ioctl = emac_ioctl, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = emac_set_mac_address, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = emac_poll_controller, +#endif +}; + +/* Search EMAC board, allocate space and register it + */ +static int emac_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct emac_board_info *db; + struct net_device *ndev; + int ret = 0; + const char *mac_addr; + + ndev = alloc_etherdev(sizeof(struct emac_board_info)); + if (!ndev) { + dev_err(&pdev->dev, "could not allocate device.\n"); + return -ENOMEM; + } + + SET_NETDEV_DEV(ndev, &pdev->dev); + + db = netdev_priv(ndev); + memset(db, 0, sizeof(*db)); + + db->dev = &pdev->dev; + db->ndev = ndev; + db->pdev = pdev; + + spin_lock_init(&db->lock); + + db->membase = of_iomap(np, 0); + if (!db->membase) { + dev_err(&pdev->dev, "failed to remap registers\n"); + return -ENOMEM; + goto out; + } + + /* fill in parameters for net-dev structure */ + ndev->base_addr = (unsigned long)db->membase; + ndev->irq = irq_of_parse_and_map(np, 0); + if (ndev->irq == -ENXIO) { + netdev_err(ndev, "No irq resource\n"); + ret = ndev->irq; + goto out; + } + + db->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(db->clk)) + goto out; + + clk_prepare_enable(db->clk); + + db->phy_node = of_parse_phandle(np, "phy", 0); + if (!db->phy_node) { + dev_err(&pdev->dev, "no associated PHY\n"); + ret = -ENODEV; + goto out; + } + + /* Read MAC-address from DT */ + mac_addr = of_get_mac_address(np); + if (mac_addr) + memcpy(ndev->dev_addr, mac_addr, ETH_ALEN); + + /* Check if the MAC address is valid, if not get a random one */ + if (!is_valid_ether_addr(ndev->dev_addr)) { + eth_hw_addr_random(ndev); + dev_warn(&pdev->dev, "using random MAC address %pM\n", + ndev->dev_addr); + } + + db->emacrx_completed_flag = 1; + emac_powerup(ndev); + emac_reset(db); + + ether_setup(ndev); + + ndev->netdev_ops = &emac_netdev_ops; + ndev->watchdog_timeo = msecs_to_jiffies(watchdog); + ndev->ethtool_ops = &emac_ethtool_ops; + +#ifdef CONFIG_NET_POLL_CONTROLLER + ndev->poll_controller = &emac_poll_controller; +#endif + + platform_set_drvdata(pdev, ndev); + + /* Carrier starts down, phylib will bring it up */ + netif_carrier_off(ndev); + + ret = register_netdev(ndev); + if (ret) { + dev_err(&pdev->dev, "Registering netdev failed!\n"); + ret = -ENODEV; + goto out; + } + + dev_info(&pdev->dev, "%s: at %p, IRQ %d MAC: %pM\n", + ndev->name, db->membase, ndev->irq, ndev->dev_addr); + + return 0; + +out: + dev_err(db->dev, "not found (%d).\n", ret); + + free_netdev(ndev); + + return ret; +} + +static int emac_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + unregister_netdev(ndev); + free_netdev(ndev); + + dev_dbg(&pdev->dev, "released and freed device\n"); + return 0; +} + +static int emac_suspend(struct platform_device *dev, pm_message_t state) +{ + struct net_device *ndev = platform_get_drvdata(dev); + + netif_carrier_off(ndev); + netif_device_detach(ndev); + emac_shutdown(ndev); + + return 0; +} + +static int emac_resume(struct platform_device *dev) +{ + struct net_device *ndev = platform_get_drvdata(dev); + struct emac_board_info *db = netdev_priv(ndev); + + emac_reset(db); + emac_init_device(ndev); + netif_device_attach(ndev); + + return 0; +} + +static const struct of_device_id emac_of_match[] = { + {.compatible = "allwinner,sun4i-emac",}, + {}, +}; + +MODULE_DEVICE_TABLE(of, emac_of_match); + +static struct platform_driver emac_driver = { + .driver = { + .name = "sun4i-emac", + .of_match_table = emac_of_match, + }, + .probe = emac_probe, + .remove = emac_remove, + .suspend = emac_suspend, + .resume = emac_resume, +}; + +module_platform_driver(emac_driver); + +MODULE_AUTHOR("Stefan Roese <sr@denx.de>"); +MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); +MODULE_DESCRIPTION("Allwinner A10 emac network driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.h b/drivers/net/ethernet/allwinner/sun4i-emac.h new file mode 100644 index 0000000..38c72d9 --- /dev/null +++ b/drivers/net/ethernet/allwinner/sun4i-emac.h @@ -0,0 +1,108 @@ +/* + * Allwinner EMAC Fast Ethernet driver for Linux. + * + * Copyright 2012 Stefan Roese <sr@denx.de> + * Copyright 2013 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * Based on the Linux driver provided by Allwinner: + * Copyright (C) 1997 Sten Wang + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _SUN4I_EMAC_H_ +#define _SUN4I_EMAC_H_ + +#define EMAC_CTL_REG (0x00) +#define EMAC_CTL_RESET (1 << 0) +#define EMAC_CTL_TX_EN (1 << 1) +#define EMAC_CTL_RX_EN (1 << 2) +#define EMAC_TX_MODE_REG (0x04) +#define EMAC_TX_MODE_ABORTED_FRAME_EN (1 << 0) +#define EMAC_TX_MODE_DMA_EN (1 << 1) +#define EMAC_TX_FLOW_REG (0x08) +#define EMAC_TX_CTL0_REG (0x0c) +#define EMAC_TX_CTL1_REG (0x10) +#define EMAC_TX_INS_REG (0x14) +#define EMAC_TX_PL0_REG (0x18) +#define EMAC_TX_PL1_REG (0x1c) +#define EMAC_TX_STA_REG (0x20) +#define EMAC_TX_IO_DATA_REG (0x24) +#define EMAC_TX_IO_DATA1_REG (0x28) +#define EMAC_TX_TSVL0_REG (0x2c) +#define EMAC_TX_TSVH0_REG (0x30) +#define EMAC_TX_TSVL1_REG (0x34) +#define EMAC_TX_TSVH1_REG (0x38) +#define EMAC_RX_CTL_REG (0x3c) +#define EMAC_RX_CTL_AUTO_DRQ_EN (1 << 1) +#define EMAC_RX_CTL_DMA_EN (1 << 2) +#define EMAC_RX_CTL_PASS_ALL_EN (1 << 4) +#define EMAC_RX_CTL_PASS_CTL_EN (1 << 5) +#define EMAC_RX_CTL_PASS_CRC_ERR_EN (1 << 6) +#define EMAC_RX_CTL_PASS_LEN_ERR_EN (1 << 7) +#define EMAC_RX_CTL_PASS_LEN_OOR_EN (1 << 8) +#define EMAC_RX_CTL_ACCEPT_UNICAST_EN (1 << 16) +#define EMAC_RX_CTL_DA_FILTER_EN (1 << 17) +#define EMAC_RX_CTL_ACCEPT_MULTICAST_EN (1 << 20) +#define EMAC_RX_CTL_HASH_FILTER_EN (1 << 21) +#define EMAC_RX_CTL_ACCEPT_BROADCAST_EN (1 << 22) +#define EMAC_RX_CTL_SA_FILTER_EN (1 << 24) +#define EMAC_RX_CTL_SA_FILTER_INVERT_EN (1 << 25) +#define EMAC_RX_HASH0_REG (0x40) +#define EMAC_RX_HASH1_REG (0x44) +#define EMAC_RX_STA_REG (0x48) +#define EMAC_RX_IO_DATA_REG (0x4c) +#define EMAC_RX_IO_DATA_LEN(x) (x & 0xffff) +#define EMAC_RX_IO_DATA_STATUS(x) ((x >> 16) & 0xffff) +#define EMAC_RX_IO_DATA_STATUS_CRC_ERR (1 << 4) +#define EMAC_RX_IO_DATA_STATUS_LEN_ERR (3 << 5) +#define EMAC_RX_IO_DATA_STATUS_OK (1 << 7) +#define EMAC_RX_FBC_REG (0x50) +#define EMAC_INT_CTL_REG (0x54) +#define EMAC_INT_STA_REG (0x58) +#define EMAC_MAC_CTL0_REG (0x5c) +#define EMAC_MAC_CTL0_RX_FLOW_CTL_EN (1 << 2) +#define EMAC_MAC_CTL0_TX_FLOW_CTL_EN (1 << 3) +#define EMAC_MAC_CTL0_SOFT_RESET (1 << 15) +#define EMAC_MAC_CTL1_REG (0x60) +#define EMAC_MAC_CTL1_DUPLEX_EN (1 << 0) +#define EMAC_MAC_CTL1_LEN_CHECK_EN (1 << 1) +#define EMAC_MAC_CTL1_HUGE_FRAME_EN (1 << 2) +#define EMAC_MAC_CTL1_DELAYED_CRC_EN (1 << 3) +#define EMAC_MAC_CTL1_CRC_EN (1 << 4) +#define EMAC_MAC_CTL1_PAD_EN (1 << 5) +#define EMAC_MAC_CTL1_PAD_CRC_EN (1 << 6) +#define EMAC_MAC_CTL1_AD_SHORT_FRAME_EN (1 << 7) +#define EMAC_MAC_CTL1_BACKOFF_DIS (1 << 12) +#define EMAC_MAC_IPGT_REG (0x64) +#define EMAC_MAC_IPGT_HALF_DUPLEX (0x12) +#define EMAC_MAC_IPGT_FULL_DUPLEX (0x15) +#define EMAC_MAC_IPGR_REG (0x68) +#define EMAC_MAC_IPGR_IPG1 (0x0c) +#define EMAC_MAC_IPGR_IPG2 (0x12) +#define EMAC_MAC_CLRT_REG (0x6c) +#define EMAC_MAC_CLRT_COLLISION_WINDOW (0x37) +#define EMAC_MAC_CLRT_RM (0x0f) +#define EMAC_MAC_MAXF_REG (0x70) +#define EMAC_MAC_SUPP_REG (0x74) +#define EMAC_MAC_TEST_REG (0x78) +#define EMAC_MAC_MCFG_REG (0x7c) +#define EMAC_MAC_A0_REG (0x98) +#define EMAC_MAC_A1_REG (0x9c) +#define EMAC_MAC_A2_REG (0xa0) +#define EMAC_SAFX_L_REG0 (0xa4) +#define EMAC_SAFX_H_REG0 (0xa8) +#define EMAC_SAFX_L_REG1 (0xac) +#define EMAC_SAFX_H_REG1 (0xb0) +#define EMAC_SAFX_L_REG2 (0xb4) +#define EMAC_SAFX_H_REG2 (0xb8) +#define EMAC_SAFX_L_REG3 (0xbc) +#define EMAC_SAFX_H_REG3 (0xc0) + +#define EMAC_PHY_DUPLEX (1 << 8) + +#define EMAC_EEPROM_MAGIC (0x444d394b) +#define EMAC_UNDOCUMENTED_MAGIC (0x0143414d) +#endif /* _SUN4I_EMAC_H_ */ |
