summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/8390/hp-plus.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/8390/hp-plus.c')
-rw-r--r--drivers/net/ethernet/8390/hp-plus.c505
1 files changed, 0 insertions, 505 deletions
diff --git a/drivers/net/ethernet/8390/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c
deleted file mode 100644
index 52f70f9..0000000
--- a/drivers/net/ethernet/8390/hp-plus.c
+++ /dev/null
@@ -1,505 +0,0 @@
-/* hp-plus.c: A HP PCLAN/plus ethernet driver for linux. */
-/*
- Written 1994 by Donald Becker.
-
- This driver is for the Hewlett Packard PC LAN (27***) plus ethercards.
- These cards are sold under several model numbers, usually 2724*.
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
- The author may be reached as becker@scyld.com, or C/O
- Scyld Computing Corporation
- 410 Severn Ave., Suite 210
- Annapolis MD 21403
-
- As is often the case, a great deal of credit is owed to Russ Nelson.
- The Crynwr packet driver was my primary source of HP-specific
- programming information.
-*/
-
-static const char version[] =
-"hp-plus.c:v1.10 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
-
-#include <linux/module.h>
-
-#include <linux/string.h> /* Important -- this inlines word moves. */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-
-#include "8390.h"
-
-#define DRV_NAME "hp-plus"
-
-/* A zero-terminated list of I/O addresses to be probed. */
-static unsigned int hpplus_portlist[] __initdata =
-{0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0};
-
-/*
- The HP EtherTwist chip implementation is a fairly routine DP8390
- implementation. It allows both shared memory and programmed-I/O buffer
- access, using a custom interface for both. The programmed-I/O mode is
- entirely implemented in the HP EtherTwist chip, bypassing the problem
- ridden built-in 8390 facilities used on NE2000 designs. The shared
- memory mode is likewise special, with an offset register used to make
- packets appear at the shared memory base. Both modes use a base and bounds
- page register to hide the Rx ring buffer wrap -- a packet that spans the
- end of physical buffer memory appears continuous to the driver. (c.f. the
- 3c503 and Cabletron E2100)
-
- A special note: the internal buffer of the board is only 8 bits wide.
- This lays several nasty traps for the unaware:
- - the 8390 must be programmed for byte-wide operations
- - all I/O and memory operations must work on whole words (the access
- latches are serially preloaded and have no byte-swapping ability).
-
- This board is laid out in I/O space much like the earlier HP boards:
- the first 16 locations are for the board registers, and the second 16 are
- for the 8390. The board is easy to identify, with both a dedicated 16 bit
- ID register and a constant 0x530* value in the upper bits of the paging
- register.
-*/
-
-#define HP_ID 0x00 /* ID register, always 0x4850. */
-#define HP_PAGING 0x02 /* Registers visible @ 8-f, see PageName. */
-#define HPP_OPTION 0x04 /* Bitmapped options, see HP_Option. */
-#define HPP_OUT_ADDR 0x08 /* I/O output location in Perf_Page. */
-#define HPP_IN_ADDR 0x0A /* I/O input location in Perf_Page. */
-#define HP_DATAPORT 0x0c /* I/O data transfer in Perf_Page. */
-#define NIC_OFFSET 0x10 /* Offset to the 8390 registers. */
-#define HP_IO_EXTENT 32
-
-#define HP_START_PG 0x00 /* First page of TX buffer */
-#define HP_STOP_PG 0x80 /* Last page +1 of RX ring */
-
-/* The register set selected in HP_PAGING. */
-enum PageName {
- Perf_Page = 0, /* Normal operation. */
- MAC_Page = 1, /* The ethernet address (+checksum). */
- HW_Page = 2, /* EEPROM-loaded hardware parameters. */
- LAN_Page = 4, /* Transceiver selection, testing, etc. */
- ID_Page = 6 };
-
-/* The bit definitions for the HPP_OPTION register. */
-enum HP_Option {
- NICReset = 1, ChipReset = 2, /* Active low, really UNreset. */
- EnableIRQ = 4, FakeIntr = 8, BootROMEnb = 0x10, IOEnb = 0x20,
- MemEnable = 0x40, ZeroWait = 0x80, MemDisable = 0x1000, };
-
-static int hpp_probe1(struct net_device *dev, int ioaddr);
-
-static void hpp_reset_8390(struct net_device *dev);
-static int hpp_open(struct net_device *dev);
-static int hpp_close(struct net_device *dev);
-static void hpp_mem_block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset);
-static void hpp_mem_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page);
-static void hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page);
-static void hpp_io_block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset);
-static void hpp_io_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page);
-static void hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page);
-
-
-/* Probe a list of addresses for an HP LAN+ adaptor.
- This routine is almost boilerplate. */
-
-static int __init do_hpp_probe(struct net_device *dev)
-{
- int i;
- int base_addr = dev->base_addr;
- int irq = dev->irq;
-
- if (base_addr > 0x1ff) /* Check a single specified location. */
- return hpp_probe1(dev, base_addr);
- else if (base_addr != 0) /* Don't probe at all. */
- return -ENXIO;
-
- for (i = 0; hpplus_portlist[i]; i++) {
- if (hpp_probe1(dev, hpplus_portlist[i]) == 0)
- return 0;
- dev->irq = irq;
- }
-
- return -ENODEV;
-}
-
-#ifndef MODULE
-struct net_device * __init hp_plus_probe(int unit)
-{
- struct net_device *dev = alloc_eip_netdev();
- int err;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
-
- err = do_hpp_probe(dev);
- if (err)
- goto out;
- return dev;
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-#endif
-
-static const struct net_device_ops hpp_netdev_ops = {
- .ndo_open = hpp_open,
- .ndo_stop = hpp_close,
- .ndo_start_xmit = eip_start_xmit,
- .ndo_tx_timeout = eip_tx_timeout,
- .ndo_get_stats = eip_get_stats,
- .ndo_set_rx_mode = eip_set_multicast_list,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_change_mtu = eth_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = eip_poll,
-#endif
-};
-
-
-/* Do the interesting part of the probe at a single address. */
-static int __init hpp_probe1(struct net_device *dev, int ioaddr)
-{
- int i, retval;
- unsigned char checksum = 0;
- const char name[] = "HP-PC-LAN+";
- int mem_start;
- static unsigned version_printed;
-
- if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME))
- return -EBUSY;
-
- /* Check for the HP+ signature, 50 48 0x 53. */
- if (inw(ioaddr + HP_ID) != 0x4850 ||
- (inw(ioaddr + HP_PAGING) & 0xfff0) != 0x5300) {
- retval = -ENODEV;
- goto out;
- }
-
- if (ei_debug && version_printed++ == 0)
- printk(version);
-
- printk("%s: %s at %#3x, ", dev->name, name, ioaddr);
-
- /* Retrieve and checksum the station address. */
- outw(MAC_Page, ioaddr + HP_PAGING);
-
- for(i = 0; i < ETH_ALEN; i++) {
- unsigned char inval = inb(ioaddr + 8 + i);
- dev->dev_addr[i] = inval;
- checksum += inval;
- }
- checksum += inb(ioaddr + 14);
-
- printk("%pM", dev->dev_addr);
-
- if (checksum != 0xff) {
- printk(" bad checksum %2.2x.\n", checksum);
- retval = -ENODEV;
- goto out;
- } else {
- /* Point at the Software Configuration Flags. */
- outw(ID_Page, ioaddr + HP_PAGING);
- printk(" ID %4.4x", inw(ioaddr + 12));
- }
-
- /* Read the IRQ line. */
- outw(HW_Page, ioaddr + HP_PAGING);
- {
- int irq = inb(ioaddr + 13) & 0x0f;
- int option = inw(ioaddr + HPP_OPTION);
-
- dev->irq = irq;
- if (option & MemEnable) {
- mem_start = inw(ioaddr + 9) << 8;
- printk(", IRQ %d, memory address %#x.\n", irq, mem_start);
- } else {
- mem_start = 0;
- printk(", IRQ %d, programmed-I/O mode.\n", irq);
- }
- }
-
- /* Set the wrap registers for string I/O reads. */
- outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14);
-
- /* Set the base address to point to the NIC, not the "real" base! */
- dev->base_addr = ioaddr + NIC_OFFSET;
-
- dev->netdev_ops = &hpp_netdev_ops;
-
- ei_status.name = name;
- ei_status.word16 = 0; /* Agggghhhhh! Debug time: 2 days! */
- ei_status.tx_start_page = HP_START_PG;
- ei_status.rx_start_page = HP_START_PG + TX_PAGES/2;
- ei_status.stop_page = HP_STOP_PG;
-
- ei_status.reset_8390 = &hpp_reset_8390;
- ei_status.block_input = &hpp_io_block_input;
- ei_status.block_output = &hpp_io_block_output;
- ei_status.get_8390_hdr = &hpp_io_get_8390_hdr;
-
- /* Check if the memory_enable flag is set in the option register. */
- if (mem_start) {
- ei_status.block_input = &hpp_mem_block_input;
- ei_status.block_output = &hpp_mem_block_output;
- ei_status.get_8390_hdr = &hpp_mem_get_8390_hdr;
- dev->mem_start = mem_start;
- ei_status.mem = ioremap(mem_start,
- (HP_STOP_PG - HP_START_PG)*256);
- if (!ei_status.mem) {
- retval = -ENOMEM;
- goto out;
- }
- ei_status.rmem_start = dev->mem_start + TX_PAGES/2*256;
- dev->mem_end = ei_status.rmem_end
- = dev->mem_start + (HP_STOP_PG - HP_START_PG)*256;
- }
-
- outw(Perf_Page, ioaddr + HP_PAGING);
- NS8390p_init(dev, 0);
- /* Leave the 8390 and HP chip reset. */
- outw(inw(ioaddr + HPP_OPTION) & ~EnableIRQ, ioaddr + HPP_OPTION);
-
- retval = register_netdev(dev);
- if (retval)
- goto out1;
- return 0;
-out1:
- iounmap(ei_status.mem);
-out:
- release_region(ioaddr, HP_IO_EXTENT);
- return retval;
-}
-
-static int
-hpp_open(struct net_device *dev)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- int option_reg;
- int retval;
-
- if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
- return retval;
- }
-
- /* Reset the 8390 and HP chip. */
- option_reg = inw(ioaddr + HPP_OPTION);
- outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION);
- udelay(5);
- /* Unreset the board and enable interrupts. */
- outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION);
-
- /* Set the wrap registers for programmed-I/O operation. */
- outw(HW_Page, ioaddr + HP_PAGING);
- outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14);
-
- /* Select the operational page. */
- outw(Perf_Page, ioaddr + HP_PAGING);
-
- return eip_open(dev);
-}
-
-static int
-hpp_close(struct net_device *dev)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- int option_reg = inw(ioaddr + HPP_OPTION);
-
- free_irq(dev->irq, dev);
- eip_close(dev);
- outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset,
- ioaddr + HPP_OPTION);
-
- return 0;
-}
-
-static void
-hpp_reset_8390(struct net_device *dev)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- int option_reg = inw(ioaddr + HPP_OPTION);
-
- if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies);
-
- outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION);
- /* Pause a few cycles for the hardware reset to take place. */
- udelay(5);
- ei_status.txing = 0;
- outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION);
-
- udelay(5);
-
-
- if ((inb_p(ioaddr+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0)
- printk("%s: hp_reset_8390() did not complete.\n", dev->name);
-
- if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies);
-}
-
-/* The programmed-I/O version of reading the 4 byte 8390 specific header.
- Note that transfer with the EtherTwist+ must be on word boundaries. */
-
-static void
-hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
-
- outw((ring_page<<8), ioaddr + HPP_IN_ADDR);
- insw(ioaddr + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
-}
-
-/* Block input and output, similar to the Crynwr packet driver. */
-
-static void
-hpp_io_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- char *buf = skb->data;
-
- outw(ring_offset, ioaddr + HPP_IN_ADDR);
- insw(ioaddr + HP_DATAPORT, buf, count>>1);
- if (count & 0x01)
- buf[count-1] = inw(ioaddr + HP_DATAPORT);
-}
-
-/* The corresponding shared memory versions of the above 2 functions. */
-
-static void
-hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- int option_reg = inw(ioaddr + HPP_OPTION);
-
- outw((ring_page<<8), ioaddr + HPP_IN_ADDR);
- outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
- memcpy_fromio(hdr, ei_status.mem, sizeof(struct e8390_pkt_hdr));
- outw(option_reg, ioaddr + HPP_OPTION);
- hdr->count = (le16_to_cpu(hdr->count) + 3) & ~3; /* Round up allocation. */
-}
-
-static void
-hpp_mem_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- int option_reg = inw(ioaddr + HPP_OPTION);
-
- outw(ring_offset, ioaddr + HPP_IN_ADDR);
-
- outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
-
- /* Caution: this relies on get_8390_hdr() rounding up count!
- Also note that we *can't* use eth_io_copy_and_sum() because
- it will not always copy "count" bytes (e.g. padded IP). */
-
- memcpy_fromio(skb->data, ei_status.mem, count);
- outw(option_reg, ioaddr + HPP_OPTION);
-}
-
-/* A special note: we *must* always transfer >=16 bit words.
- It's always safe to round up, so we do. */
-static void
-hpp_io_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- outw(start_page << 8, ioaddr + HPP_OUT_ADDR);
- outsl(ioaddr + HP_DATAPORT, buf, (count+3)>>2);
-}
-
-static void
-hpp_mem_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- int option_reg = inw(ioaddr + HPP_OPTION);
-
- outw(start_page << 8, ioaddr + HPP_OUT_ADDR);
- outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
- memcpy_toio(ei_status.mem, buf, (count + 3) & ~3);
- outw(option_reg, ioaddr + HPP_OPTION);
-}
-
-
-#ifdef MODULE
-#define MAX_HPP_CARDS 4 /* Max number of HPP cards per module */
-static struct net_device *dev_hpp[MAX_HPP_CARDS];
-static int io[MAX_HPP_CARDS];
-static int irq[MAX_HPP_CARDS];
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O port address(es)");
-MODULE_PARM_DESC(irq, "IRQ number(s); ignored if properly detected");
-MODULE_DESCRIPTION("HP PC-LAN+ ISA ethernet driver");
-MODULE_LICENSE("GPL");
-
-/* This is set up so that only a single autoprobe takes place per call.
-ISA device autoprobes on a running machine are not recommended. */
-int __init
-init_module(void)
-{
- struct net_device *dev;
- int this_dev, found = 0;
-
- for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) {
- if (io[this_dev] == 0) {
- if (this_dev != 0) break; /* only autoprobe 1st one */
- printk(KERN_NOTICE "hp-plus.c: Presently autoprobing (not recommended) for a single card.\n");
- }
- dev = alloc_eip_netdev();
- if (!dev)
- break;
- dev->irq = irq[this_dev];
- dev->base_addr = io[this_dev];
- if (do_hpp_probe(dev) == 0) {
- dev_hpp[found++] = dev;
- continue;
- }
- free_netdev(dev);
- printk(KERN_WARNING "hp-plus.c: No HP-Plus card found (i/o = 0x%x).\n", io[this_dev]);
- break;
- }
- if (found)
- return 0;
- return -ENXIO;
-}
-
-static void cleanup_card(struct net_device *dev)
-{
- /* NB: hpp_close() handles free_irq */
- iounmap(ei_status.mem);
- release_region(dev->base_addr - NIC_OFFSET, HP_IO_EXTENT);
-}
-
-void __exit
-cleanup_module(void)
-{
- int this_dev;
-
- for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) {
- struct net_device *dev = dev_hpp[this_dev];
- if (dev) {
- unregister_netdev(dev);
- cleanup_card(dev);
- free_netdev(dev);
- }
- }
-}
-#endif /* MODULE */
OpenPOWER on IntegriCloud