diff options
Diffstat (limited to 'drivers/net/e1000e')
-rw-r--r-- | drivers/net/e1000e/82571.c | 22 | ||||
-rw-r--r-- | drivers/net/e1000e/e1000.h | 12 | ||||
-rw-r--r-- | drivers/net/e1000e/es2lan.c | 5 | ||||
-rw-r--r-- | drivers/net/e1000e/ethtool.c | 154 | ||||
-rw-r--r-- | drivers/net/e1000e/hw.h | 1 | ||||
-rw-r--r-- | drivers/net/e1000e/ich8lan.c | 16 | ||||
-rw-r--r-- | drivers/net/e1000e/lib.c | 18 | ||||
-rw-r--r-- | drivers/net/e1000e/netdev.c | 213 | ||||
-rw-r--r-- | drivers/net/e1000e/phy.c | 4 |
9 files changed, 242 insertions, 203 deletions
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 89a6903..8295f21 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -300,6 +300,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) func->set_lan_id = e1000_set_lan_id_single_port; func->check_mng_mode = e1000e_check_mng_mode_generic; func->led_on = e1000e_led_on_generic; + func->blink_led = e1000e_blink_led_generic; /* FWSM register */ mac->has_fwsm = true; @@ -320,6 +321,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) default: func->check_mng_mode = e1000e_check_mng_mode_generic; func->led_on = e1000e_led_on_generic; + func->blink_led = e1000e_blink_led_generic; /* FWSM register */ mac->has_fwsm = true; @@ -431,9 +433,6 @@ static s32 e1000_get_variants_82571(struct e1000_adapter *adapter) case e1000_82573: case e1000_82574: case e1000_82583: - /* Disable ASPM L0s due to hardware errata */ - e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L0S); - if (pdev->device == E1000_DEV_ID_82573L) { adapter->flags |= FLAG_HAS_JUMBO_FRAMES; adapter->max_hw_frame_size = DEFAULT_JUMBO; @@ -594,7 +593,7 @@ static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw) extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; - msleep(2); + usleep_range(2000, 4000); i++; } while (i < MDIO_OWNERSHIP_TIMEOUT); @@ -816,7 +815,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) /* Check for pending operations. */ for (i = 0; i < E1000_FLASH_UPDATES; i++) { - msleep(1); + usleep_range(1000, 2000); if ((er32(EECD) & E1000_EECD_FLUPD) == 0) break; } @@ -840,7 +839,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) ew32(EECD, eecd); for (i = 0; i < E1000_FLASH_UPDATES; i++) { - msleep(1); + usleep_range(1000, 2000); if ((er32(EECD) & E1000_EECD_FLUPD) == 0) break; } @@ -930,7 +929,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw) if (er32(EEMNGCTL) & E1000_NVM_CFG_DONE_PORT_0) break; - msleep(1); + usleep_range(1000, 2000); timeout--; } if (!timeout) { @@ -1037,7 +1036,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) ew32(TCTL, E1000_TCTL_PSP); e1e_flush(); - msleep(10); + usleep_range(10000, 20000); /* * Must acquire the MDIO ownership before MAC reset. @@ -2066,7 +2065,8 @@ struct e1000_info e1000_82573_info = { | FLAG_HAS_SMART_POWER_DOWN | FLAG_HAS_AMT | FLAG_HAS_SWSM_ON_LOAD, - .flags2 = FLAG2_DISABLE_ASPM_L1, + .flags2 = FLAG2_DISABLE_ASPM_L1 + | FLAG2_DISABLE_ASPM_L0S, .pba = 20, .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, .get_variants = e1000_get_variants_82571, @@ -2086,7 +2086,8 @@ struct e1000_info e1000_82574_info = { | FLAG_HAS_SMART_POWER_DOWN | FLAG_HAS_AMT | FLAG_HAS_CTRLEXT_ON_LOAD, - .flags2 = FLAG2_CHECK_PHY_HANG, + .flags2 = FLAG2_CHECK_PHY_HANG + | FLAG2_DISABLE_ASPM_L0S, .pba = 32, .max_hw_frame_size = DEFAULT_JUMBO, .get_variants = e1000_get_variants_82571, @@ -2104,6 +2105,7 @@ struct e1000_info e1000_82583_info = { | FLAG_HAS_SMART_POWER_DOWN | FLAG_HAS_AMT | FLAG_HAS_CTRLEXT_ON_LOAD, + .flags2 = FLAG2_DISABLE_ASPM_L0S, .pba = 32, .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, .get_variants = e1000_get_variants_82571, diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 00bf595..9549879 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -31,6 +31,7 @@ #ifndef _E1000_H_ #define _E1000_H_ +#include <linux/bitops.h> #include <linux/types.h> #include <linux/timer.h> #include <linux/workqueue.h> @@ -39,6 +40,7 @@ #include <linux/pci.h> #include <linux/pci-aspm.h> #include <linux/crc32.h> +#include <linux/if_vlan.h> #include "hw.h" @@ -280,7 +282,7 @@ struct e1000_adapter { const struct e1000_info *ei; - struct vlan_group *vlgrp; + unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; u32 bd_number; u32 rx_buffer_len; u16 mng_vlan_id; @@ -389,13 +391,10 @@ struct e1000_adapter { bool fc_autoneg; - unsigned long led_status; - unsigned int flags; unsigned int flags2; struct work_struct downshift_task; struct work_struct update_phy_task; - struct work_struct led_blink_task; struct work_struct print_hang_task; bool idle_check; @@ -456,6 +455,7 @@ struct e1000_info { #define FLAG2_HAS_PHY_STATS (1 << 4) #define FLAG2_HAS_EEE (1 << 5) #define FLAG2_DMA_BURST (1 << 6) +#define FLAG2_DISABLE_ASPM_L0S (1 << 7) #define FLAG2_DISABLE_AIM (1 << 8) #define FLAG2_CHECK_PHY_HANG (1 << 9) @@ -484,7 +484,6 @@ extern const char e1000e_driver_version[]; extern void e1000e_check_options(struct e1000_adapter *adapter); extern void e1000e_set_ethtool_ops(struct net_device *netdev); -extern void e1000e_led_blink_task(struct work_struct *work); extern int e1000e_up(struct e1000_adapter *adapter); extern void e1000e_down(struct e1000_adapter *adapter); @@ -502,7 +501,6 @@ extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter); extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter); extern void e1000e_get_hw_control(struct e1000_adapter *adapter); extern void e1000e_release_hw_control(struct e1000_adapter *adapter); -extern void e1000e_disable_aspm(struct pci_dev *pdev, u16 state); extern unsigned int copybreak; @@ -573,7 +571,7 @@ extern s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data); extern void e1000e_config_collision_dist(struct e1000_hw *hw); extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw); extern s32 e1000e_force_mac_fc(struct e1000_hw *hw); -extern s32 e1000e_blink_led(struct e1000_hw *hw); +extern s32 e1000e_blink_led_generic(struct e1000_hw *hw); extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value); extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw); extern void e1000e_reset_adaptive(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index 2fefa82..f4bbeb2 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -612,7 +612,7 @@ static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw) while (timeout) { if (er32(EEMNGCTL) & mask) break; - msleep(1); + usleep_range(1000, 2000); timeout--; } if (!timeout) { @@ -802,7 +802,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) ew32(TCTL, E1000_TCTL_PSP); e1e_flush(); - msleep(10); + usleep_range(10000, 20000); ctrl = er32(CTRL); @@ -1434,6 +1434,7 @@ static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw) static struct e1000_mac_operations es2_mac_ops = { .read_mac_addr = e1000_read_mac_addr_80003es2lan, .id_led_init = e1000e_id_led_init, + .blink_led = e1000e_blink_led_generic, .check_mng_mode = e1000e_check_mng_mode_generic, /* check_for_link dependent on media type */ .cleanup_led = e1000e_cleanup_led_generic, diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 07f09e9..859d0d3 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -122,6 +122,7 @@ static int e1000_get_settings(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + u32 speed; if (hw->phy.media_type == e1000_media_type_copper) { @@ -159,23 +160,23 @@ static int e1000_get_settings(struct net_device *netdev, ecmd->transceiver = XCVR_EXTERNAL; } - ecmd->speed = -1; + speed = -1; ecmd->duplex = -1; if (netif_running(netdev)) { if (netif_carrier_ok(netdev)) { - ecmd->speed = adapter->link_speed; + speed = adapter->link_speed; ecmd->duplex = adapter->link_duplex - 1; } } else { u32 status = er32(STATUS); if (status & E1000_STATUS_LU) { if (status & E1000_STATUS_SPEED_1000) - ecmd->speed = 1000; + speed = SPEED_1000; else if (status & E1000_STATUS_SPEED_100) - ecmd->speed = 100; + speed = SPEED_100; else - ecmd->speed = 10; + speed = SPEED_10; if (status & E1000_STATUS_FD) ecmd->duplex = DUPLEX_FULL; @@ -184,6 +185,7 @@ static int e1000_get_settings(struct net_device *netdev, } } + ethtool_cmd_speed_set(ecmd, speed); ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) || hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE; @@ -198,20 +200,25 @@ static int e1000_get_settings(struct net_device *netdev, return 0; } -static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) +static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx) { struct e1000_mac_info *mac = &adapter->hw.mac; mac->autoneg = 0; + /* Make sure dplx is at most 1 bit and lsb of speed is not set + * for the switch() below to work */ + if ((spd & 1) || (dplx & ~1)) + goto err_inval; + /* Fiber NICs only allow 1000 gbps Full duplex */ if ((adapter->hw.phy.media_type == e1000_media_type_fiber) && - spddplx != (SPEED_1000 + DUPLEX_FULL)) { - e_err("Unsupported Speed/Duplex configuration\n"); - return -EINVAL; + spd != SPEED_1000 && + dplx != DUPLEX_FULL) { + goto err_inval; } - switch (spddplx) { + switch (spd + dplx) { case SPEED_10 + DUPLEX_HALF: mac->forced_speed_duplex = ADVERTISE_10_HALF; break; @@ -230,10 +237,13 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) break; case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: - e_err("Unsupported Speed/Duplex configuration\n"); - return -EINVAL; + goto err_inval; } return 0; + +err_inval: + e_err("Unsupported Speed/Duplex configuration\n"); + return -EINVAL; } static int e1000_set_settings(struct net_device *netdev, @@ -253,7 +263,7 @@ static int e1000_set_settings(struct net_device *netdev, } while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) - msleep(1); + usleep_range(1000, 2000); if (ecmd->autoneg == AUTONEG_ENABLE) { hw->mac.autoneg = 1; @@ -269,7 +279,8 @@ static int e1000_set_settings(struct net_device *netdev, if (adapter->fc_autoneg) hw->fc.requested_mode = e1000_fc_default; } else { - if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { + u32 speed = ethtool_cmd_speed(ecmd); + if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) { clear_bit(__E1000_RESETTING, &adapter->state); return -EINVAL; } @@ -317,7 +328,7 @@ static int e1000_set_pauseparam(struct net_device *netdev, adapter->fc_autoneg = pause->autoneg; while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) - msleep(1); + usleep_range(1000, 2000); if (adapter->fc_autoneg == AUTONEG_ENABLE) { hw->fc.requested_mode = e1000_fc_default; @@ -673,7 +684,7 @@ static int e1000_set_ringparam(struct net_device *netdev, return -EINVAL; while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) - msleep(1); + usleep_range(1000, 2000); if (netif_running(adapter->netdev)) e1000e_down(adapter); @@ -952,7 +963,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) /* Disable all the interrupts */ ew32(IMC, 0xFFFFFFFF); - msleep(10); + usleep_range(10000, 20000); /* Test each interrupt */ for (i = 0; i < 10; i++) { @@ -984,7 +995,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) adapter->test_icr = 0; ew32(IMC, mask); ew32(ICS, mask); - msleep(10); + usleep_range(10000, 20000); if (adapter->test_icr & mask) { *data = 3; @@ -1002,7 +1013,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) adapter->test_icr = 0; ew32(IMS, mask); ew32(ICS, mask); - msleep(10); + usleep_range(10000, 20000); if (!(adapter->test_icr & mask)) { *data = 4; @@ -1020,7 +1031,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) adapter->test_icr = 0; ew32(IMC, ~mask & 0x00007FFF); ew32(ICS, ~mask & 0x00007FFF); - msleep(10); + usleep_range(10000, 20000); if (adapter->test_icr) { *data = 5; @@ -1031,7 +1042,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) /* Disable all the interrupts */ ew32(IMC, 0xFFFFFFFF); - msleep(10); + usleep_range(10000, 20000); /* Unhook test interrupt handler */ free_irq(irq, netdev); @@ -1406,7 +1417,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter) */ #define E1000_SERDES_LB_ON 0x410 ew32(SCTL, E1000_SERDES_LB_ON); - msleep(10); + usleep_range(10000, 20000); return 0; } @@ -1501,7 +1512,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter) hw->phy.media_type == e1000_media_type_internal_serdes) { #define E1000_SERDES_LB_OFF 0x400 ew32(SCTL, E1000_SERDES_LB_OFF); - msleep(10); + usleep_range(10000, 20000); break; } /* Fall Through */ @@ -1851,64 +1862,35 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) return 0; } -/* toggle LED 4 times per second = 2 "blinks" per second */ -#define E1000_ID_INTERVAL (HZ/4) - -/* bit defines for adapter->led_status */ -#define E1000_LED_ON 0 - -void e1000e_led_blink_task(struct work_struct *work) -{ - struct e1000_adapter *adapter = container_of(work, - struct e1000_adapter, led_blink_task); - - if (test_and_change_bit(E1000_LED_ON, &adapter->led_status)) - adapter->hw.mac.ops.led_off(&adapter->hw); - else - adapter->hw.mac.ops.led_on(&adapter->hw); -} - -static void e1000_led_blink_callback(unsigned long data) -{ - struct e1000_adapter *adapter = (struct e1000_adapter *) data; - - schedule_work(&adapter->led_blink_task); - mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL); -} - -static int e1000_phys_id(struct net_device *netdev, u32 data) +static int e1000_set_phys_id(struct net_device *netdev, + enum ethtool_phys_id_state state) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - if (!data) - data = INT_MAX; + switch (state) { + case ETHTOOL_ID_ACTIVE: + if (!hw->mac.ops.blink_led) + return 2; /* cycle on/off twice per second */ - if ((hw->phy.type == e1000_phy_ife) || - (hw->mac.type == e1000_pchlan) || - (hw->mac.type == e1000_pch2lan) || - (hw->mac.type == e1000_82583) || - (hw->mac.type == e1000_82574)) { - if (!adapter->blink_timer.function) { - init_timer(&adapter->blink_timer); - adapter->blink_timer.function = - e1000_led_blink_callback; - adapter->blink_timer.data = (unsigned long) adapter; - } - mod_timer(&adapter->blink_timer, jiffies); - msleep_interruptible(data * 1000); - del_timer_sync(&adapter->blink_timer); + hw->mac.ops.blink_led(hw); + break; + + case ETHTOOL_ID_INACTIVE: if (hw->phy.type == e1000_phy_ife) e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0); - } else { - e1000e_blink_led(hw); - msleep_interruptible(data * 1000); - } + hw->mac.ops.led_off(hw); + hw->mac.ops.cleanup_led(hw); + break; - hw->mac.ops.led_off(hw); - clear_bit(E1000_LED_ON, &adapter->led_status); - hw->mac.ops.cleanup_led(hw); + case ETHTOOL_ID_ON: + adapter->hw.mac.ops.led_on(&adapter->hw); + break; + case ETHTOOL_ID_OFF: + adapter->hw.mac.ops.led_off(&adapter->hw); + break; + } return 0; } @@ -2020,6 +2002,31 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset, } } +static int e1000e_set_flags(struct net_device *netdev, u32 data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + bool need_reset = false; + int rc; + + need_reset = (data & ETH_FLAG_RXVLAN) != + (netdev->features & NETIF_F_HW_VLAN_RX); + + rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_RXVLAN | + ETH_FLAG_TXVLAN); + + if (rc) + return rc; + + if (need_reset) { + if (netif_running(netdev)) + e1000e_reinit_locked(adapter); + else + e1000e_reset(adapter); + } + + return 0; +} + static const struct ethtool_ops e1000_ethtool_ops = { .get_settings = e1000_get_settings, .set_settings = e1000_set_settings, @@ -2049,12 +2056,13 @@ static const struct ethtool_ops e1000_ethtool_ops = { .set_tso = e1000_set_tso, .self_test = e1000_diag_test, .get_strings = e1000_get_strings, - .phys_id = e1000_phys_id, + .set_phys_id = e1000_set_phys_id, .get_ethtool_stats = e1000_get_ethtool_stats, .get_sset_count = e1000e_get_sset_count, .get_coalesce = e1000_get_coalesce, .set_coalesce = e1000_set_coalesce, .get_flags = ethtool_op_get_flags, + .set_flags = e1000e_set_flags, }; void e1000e_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 307e1ec..6c2fa83 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -756,6 +756,7 @@ struct e1000_host_mng_command_info { /* Function pointers and static data for the MAC. */ struct e1000_mac_operations { s32 (*id_led_init)(struct e1000_hw *); + s32 (*blink_led)(struct e1000_hw *); bool (*check_mng_mode)(struct e1000_hw *); s32 (*check_for_link)(struct e1000_hw *); s32 (*cleanup_led)(struct e1000_hw *); diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index ce1dbfd..3369d1f 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -338,7 +338,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) /* Ungate automatic PHY configuration on non-managed 82579 */ if ((hw->mac.type == e1000_pch2lan) && !(fwsm & E1000_ICH_FWSM_FW_VALID)) { - msleep(10); + usleep_range(10000, 20000); e1000_gate_hw_phy_config_ich8lan(hw, false); } @@ -427,7 +427,7 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) phy->id = 0; while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) && (i++ < 100)) { - msleep(1); + usleep_range(1000, 2000); ret_val = e1000e_get_phy_id(hw); if (ret_val) return ret_val; @@ -564,6 +564,8 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter) mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan; /* ID LED init */ mac->ops.id_led_init = e1000e_id_led_init; + /* blink LED */ + mac->ops.blink_led = e1000e_blink_led_generic; /* setup LED */ mac->ops.setup_led = e1000e_setup_led_generic; /* cleanup LED */ @@ -767,6 +769,8 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) { adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES; adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN; + + hw->mac.ops.blink_led = NULL; } if ((adapter->hw.mac.type == e1000_ich8lan) && @@ -1704,7 +1708,7 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) goto out; /* Allow time for h/w to get to quiescent state after reset */ - msleep(10); + usleep_range(10000, 20000); /* Perform any necessary post-reset workarounds */ switch (hw->mac.type) { @@ -1737,7 +1741,7 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_pch2lan) { /* Ungate automatic PHY configuration on non-managed 82579 */ if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { - msleep(10); + usleep_range(10000, 20000); e1000_gate_hw_phy_config_ich8lan(hw, false); } @@ -2532,7 +2536,7 @@ release: */ if (!ret_val) { e1000e_reload_nvm(hw); - msleep(10); + usleep_range(10000, 20000); } out: @@ -3009,7 +3013,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ew32(TCTL, E1000_TCTL_PSP); e1e_flush(); - msleep(10); + usleep_range(10000, 20000); /* Workaround for ICH8 bit corruption issue in FIFO memory */ if (hw->mac.type == e1000_ich8lan) { diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 96921de5..dd8ab05 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -144,7 +144,7 @@ void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value) * @hw: pointer to the HW structure * @rar_count: receive address registers * - * Setups the receive address registers by setting the base receive address + * Setup the receive address registers by setting the base receive address * register to the devices MAC address and clearing all the other receive * address registers to 0. **/ @@ -868,7 +868,7 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) * milliseconds even if the other end is doing it in SW). */ for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) { - msleep(10); + usleep_range(10000, 20000); status = er32(STATUS); if (status & E1000_STATUS_LU) break; @@ -930,7 +930,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw) ew32(CTRL, ctrl); e1e_flush(); - msleep(1); + usleep_range(1000, 2000); /* * For these adapters, the SW definable pin 1 is set when the optics @@ -1181,7 +1181,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * of pause frames. In this case, we had to advertise * FULL flow control because we could not advertise Rx * ONLY. Hence, we must now check to see if we need to - * turn OFF the TRANSMISSION of PAUSE frames. + * turn OFF the TRANSMISSION of PAUSE frames. */ if (hw->fc.requested_mode == e1000_fc_full) { hw->fc.current_mode = e1000_fc_full; @@ -1385,7 +1385,7 @@ s32 e1000e_get_auto_rd_done(struct e1000_hw *hw) while (i < AUTO_READ_DONE_TIMEOUT) { if (er32(EECD) & E1000_EECD_AUTO_RD) break; - msleep(1); + usleep_range(1000, 2000); i++; } @@ -1530,12 +1530,12 @@ s32 e1000e_cleanup_led_generic(struct e1000_hw *hw) } /** - * e1000e_blink_led - Blink LED + * e1000e_blink_led_generic - Blink LED * @hw: pointer to the HW structure * * Blink the LEDs which are set to be on. **/ -s32 e1000e_blink_led(struct e1000_hw *hw) +s32 e1000e_blink_led_generic(struct e1000_hw *hw) { u32 ledctl_blink = 0; u32 i; @@ -2087,8 +2087,6 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) if (ret_val) return ret_val; - msleep(10); - while (widx < words) { u8 write_opcode = NVM_WRITE_OPCODE_SPI; @@ -2132,7 +2130,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) } } - msleep(10); + usleep_range(10000, 20000); nvm->ops.release(hw); return 0; } diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 506a0a0..0939040 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -58,6 +58,8 @@ char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; +static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state); + static const struct e1000_info *e1000_info_tbl[] = { [board_82571] = &e1000_82571_info, [board_82572] = &e1000_82572_info, @@ -459,13 +461,13 @@ static void e1000_receive_skb(struct e1000_adapter *adapter, struct net_device *netdev, struct sk_buff *skb, u8 status, __le16 vlan) { + u16 tag = le16_to_cpu(vlan); skb->protocol = eth_type_trans(skb, netdev); - if (adapter->vlgrp && (status & E1000_RXD_STAT_VP)) - vlan_gro_receive(&adapter->napi, adapter->vlgrp, - le16_to_cpu(vlan), skb); - else - napi_gro_receive(&adapter->napi, skb); + if (status & E1000_RXD_STAT_VP) + __vlan_hwaccel_put_tag(skb, tag); + + napi_gro_receive(&adapter->napi, skb); } /** @@ -2433,6 +2435,8 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid) vfta |= (1 << (vid & 0x1F)); hw->mac.ops.write_vfta(hw, index, vfta); } + + set_bit(vid, adapter->active_vlans); } static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) @@ -2441,13 +2445,6 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) struct e1000_hw *hw = &adapter->hw; u32 vfta, index; - if (!test_bit(__E1000_DOWN, &adapter->state)) - e1000_irq_disable(adapter); - vlan_group_set_device(adapter->vlgrp, vid, NULL); - - if (!test_bit(__E1000_DOWN, &adapter->state)) - e1000_irq_enable(adapter); - if ((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && (vid == adapter->mng_vlan_id)) { @@ -2463,93 +2460,105 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) vfta &= ~(1 << (vid & 0x1F)); hw->mac.ops.write_vfta(hw, index, vfta); } + + clear_bit(vid, adapter->active_vlans); } -static void e1000_update_mng_vlan(struct e1000_adapter *adapter) +/** + * e1000e_vlan_filter_disable - helper to disable hw VLAN filtering + * @adapter: board private structure to initialize + **/ +static void e1000e_vlan_filter_disable(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; - u16 vid = adapter->hw.mng_cookie.vlan_id; - u16 old_vid = adapter->mng_vlan_id; - - if (!adapter->vlgrp) - return; + struct e1000_hw *hw = &adapter->hw; + u32 rctl; - if (!vlan_group_get_device(adapter->vlgrp, vid)) { - adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; - if (adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { - e1000_vlan_rx_add_vid(netdev, vid); - adapter->mng_vlan_id = vid; + if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { + /* disable VLAN receive filtering */ + rctl = er32(RCTL); + rctl &= ~(E1000_RCTL_VFE | E1000_RCTL_CFIEN); + ew32(RCTL, rctl); + + if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) { + e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; } - - if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && - (vid != old_vid) && - !vlan_group_get_device(adapter->vlgrp, old_vid)) - e1000_vlan_rx_kill_vid(netdev, old_vid); - } else { - adapter->mng_vlan_id = vid; } } +/** + * e1000e_vlan_filter_enable - helper to enable HW VLAN filtering + * @adapter: board private structure to initialize + **/ +static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl; -static void e1000_vlan_rx_register(struct net_device *netdev, - struct vlan_group *grp) + if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { + /* enable VLAN receive filtering */ + rctl = er32(RCTL); + rctl |= E1000_RCTL_VFE; + rctl &= ~E1000_RCTL_CFIEN; + ew32(RCTL, rctl); + } +} + +/** + * e1000e_vlan_strip_enable - helper to disable HW VLAN stripping + * @adapter: board private structure to initialize + **/ +static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter) { - struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u32 ctrl, rctl; + u32 ctrl; - if (!test_bit(__E1000_DOWN, &adapter->state)) - e1000_irq_disable(adapter); - adapter->vlgrp = grp; + /* disable VLAN tag insert/strip */ + ctrl = er32(CTRL); + ctrl &= ~E1000_CTRL_VME; + ew32(CTRL, ctrl); +} - if (grp) { - /* enable VLAN tag insert/strip */ - ctrl = er32(CTRL); - ctrl |= E1000_CTRL_VME; - ew32(CTRL, ctrl); +/** + * e1000e_vlan_strip_enable - helper to enable HW VLAN stripping + * @adapter: board private structure to initialize + **/ +static void e1000e_vlan_strip_enable(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl; - if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { - /* enable VLAN receive filtering */ - rctl = er32(RCTL); - rctl &= ~E1000_RCTL_CFIEN; - ew32(RCTL, rctl); - e1000_update_mng_vlan(adapter); - } - } else { - /* disable VLAN tag insert/strip */ - ctrl = er32(CTRL); - ctrl &= ~E1000_CTRL_VME; - ew32(CTRL, ctrl); + /* enable VLAN tag insert/strip */ + ctrl = er32(CTRL); + ctrl |= E1000_CTRL_VME; + ew32(CTRL, ctrl); +} - if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { - if (adapter->mng_vlan_id != - (u16)E1000_MNG_VLAN_NONE) { - e1000_vlan_rx_kill_vid(netdev, - adapter->mng_vlan_id); - adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; - } - } +static void e1000_update_mng_vlan(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + u16 vid = adapter->hw.mng_cookie.vlan_id; + u16 old_vid = adapter->mng_vlan_id; + + if (adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { + e1000_vlan_rx_add_vid(netdev, vid); + adapter->mng_vlan_id = vid; } - if (!test_bit(__E1000_DOWN, &adapter->state)) - e1000_irq_enable(adapter); + if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid)) + e1000_vlan_rx_kill_vid(netdev, old_vid); } static void e1000_restore_vlan(struct e1000_adapter *adapter) { u16 vid; - e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp); - - if (!adapter->vlgrp) - return; + e1000_vlan_rx_add_vid(adapter->netdev, 0); - for (vid = 0; vid < VLAN_N_VID; vid++) { - if (!vlan_group_get_device(adapter->vlgrp, vid)) - continue; + for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) e1000_vlan_rx_add_vid(adapter->netdev, vid); - } } static void e1000_init_manageability_pt(struct e1000_adapter *adapter) @@ -2902,7 +2911,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) rctl = er32(RCTL); ew32(RCTL, rctl & ~E1000_RCTL_EN); e1e_flush(); - msleep(10); + usleep_range(10000, 20000); if (adapter->flags2 & FLAG2_DMA_BURST) { /* @@ -3039,6 +3048,8 @@ static void e1000_set_multi(struct net_device *netdev) if (netdev->flags & IFF_PROMISC) { rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); rctl &= ~E1000_RCTL_VFE; + /* Do not hardware filter VLANs in promisc mode */ + e1000e_vlan_filter_disable(adapter); } else { if (netdev->flags & IFF_ALLMULTI) { rctl |= E1000_RCTL_MPE; @@ -3046,8 +3057,7 @@ static void e1000_set_multi(struct net_device *netdev) } else { rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE); } - if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) - rctl |= E1000_RCTL_VFE; + e1000e_vlan_filter_enable(adapter); } ew32(RCTL, rctl); @@ -3072,6 +3082,11 @@ static void e1000_set_multi(struct net_device *netdev) */ e1000_update_mc_addr_list(hw, NULL, 0); } + + if (netdev->features & NETIF_F_HW_VLAN_RX) + e1000e_vlan_strip_enable(adapter); + else + e1000e_vlan_strip_disable(adapter); } /** @@ -3383,7 +3398,7 @@ void e1000e_down(struct e1000_adapter *adapter) ew32(TCTL, tctl); /* flush both disables and wait for them to finish */ e1e_flush(); - msleep(10); + usleep_range(10000, 20000); napi_disable(&adapter->napi); e1000_irq_disable(adapter); @@ -3418,7 +3433,7 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter) { might_sleep(); while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) - msleep(1); + usleep_range(1000, 2000); e1000e_down(adapter); e1000e_up(adapter); clear_bit(__E1000_RESETTING, &adapter->state); @@ -3721,10 +3736,8 @@ static int e1000_close(struct net_device *netdev) * kill manageability vlan ID if supported, but not if a vlan with * the same ID is registered on the host OS (let 8021q kill it) */ - if ((adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && - !(adapter->vlgrp && - vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) + if (adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN) e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); /* @@ -4328,7 +4341,6 @@ static void e1000_watchdog_task(struct work_struct *work) link_up: spin_lock(&adapter->stats64_lock); e1000e_update_stats(adapter); - spin_unlock(&adapter->stats64_lock); mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old; adapter->tpt_old = adapter->stats.tpt; @@ -4339,6 +4351,7 @@ link_up: adapter->gorc_old = adapter->stats.gorc; adapter->gotc = adapter->stats.gotc - adapter->gotc_old; adapter->gotc_old = adapter->stats.gotc; + spin_unlock(&adapter->stats64_lock); e1000e_update_adaptive(&adapter->hw); @@ -5028,7 +5041,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) } while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) - msleep(1); + usleep_range(1000, 2000); /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */ adapter->max_frame_size = max_frame; e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); @@ -5373,7 +5386,7 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) pci_write_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, reg16); } #endif -void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) +static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) { dev_info(&pdev->dev, "Disabling ASPM %s %s\n", (state & PCIE_LINK_STATE_L0S) ? "L0s" : "", @@ -5393,13 +5406,19 @@ static int __e1000_resume(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + u16 aspm_disable_flag = 0; u32 err; + if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S) + aspm_disable_flag = PCIE_LINK_STATE_L0S; + if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1) + aspm_disable_flag |= PCIE_LINK_STATE_L1; + if (aspm_disable_flag) + e1000e_disable_aspm(pdev, aspm_disable_flag); + pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); pci_save_state(pdev); - if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1) - e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1); e1000e_set_interrupt_capability(adapter); if (netif_running(netdev)) { @@ -5643,11 +5662,17 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + u16 aspm_disable_flag = 0; int err; pci_ers_result_t result; + if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S) + aspm_disable_flag = PCIE_LINK_STATE_L0S; if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1) - e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1); + aspm_disable_flag |= PCIE_LINK_STATE_L1; + if (aspm_disable_flag) + e1000e_disable_aspm(pdev, aspm_disable_flag); + err = pci_enable_device_mem(pdev); if (err) { dev_err(&pdev->dev, @@ -5714,7 +5739,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter) u8 pba_str[E1000_PBANUM_LENGTH]; /* print bus type/speed/width info */ - e_info("(PCI Express:2.5GB/s:%s) %pM\n", + e_info("(PCI Express:2.5GT/s:%s) %pM\n", /* bus width */ ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : "Width x1"), @@ -5759,7 +5784,6 @@ static const struct net_device_ops e1000e_netdev_ops = { .ndo_tx_timeout = e1000_tx_timeout, .ndo_validate_addr = eth_validate_addr, - .ndo_vlan_rx_register = e1000_vlan_rx_register, .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid, #ifdef CONFIG_NET_POLL_CONTROLLER @@ -5789,12 +5813,17 @@ static int __devinit e1000_probe(struct pci_dev *pdev, resource_size_t flash_start, flash_len; static int cards_found; + u16 aspm_disable_flag = 0; int i, err, pci_using_dac; u16 eeprom_data = 0; u16 eeprom_apme_mask = E1000_EEPROM_APME; + if (ei->flags2 & FLAG2_DISABLE_ASPM_L0S) + aspm_disable_flag = PCIE_LINK_STATE_L0S; if (ei->flags2 & FLAG2_DISABLE_ASPM_L1) - e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1); + aspm_disable_flag |= PCIE_LINK_STATE_L1; + if (aspm_disable_flag) + e1000e_disable_aspm(pdev, aspm_disable_flag); err = pci_enable_device_mem(pdev); if (err) @@ -5991,7 +6020,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev, INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround); INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task); INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang); - INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task); /* Initialize link parameters. User can change them with ethtool */ adapter->hw.mac.autoneg = 1; @@ -6124,7 +6152,6 @@ static void __devexit e1000_remove(struct pci_dev *pdev) cancel_work_sync(&adapter->watchdog_task); cancel_work_sync(&adapter->downshift_task); cancel_work_sync(&adapter->update_phy_task); - cancel_work_sync(&adapter->led_blink_task); cancel_work_sync(&adapter->print_hang_task); if (!(netdev->flags & IFF_UP)) diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 6ae31fc..484774c 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -2372,7 +2372,7 @@ s32 e1000e_determine_phy_address(struct e1000_hw *hw) ret_val = 0; goto out; } - msleep(1); + usleep_range(1000, 2000); i++; } while (i < 10); } @@ -2740,7 +2740,7 @@ void e1000_power_down_phy_copper(struct e1000_hw *hw) e1e_rphy(hw, PHY_CONTROL, &mii_reg); mii_reg |= MII_CR_POWER_DOWN; e1e_wphy(hw, PHY_CONTROL, mii_reg); - msleep(1); + usleep_range(1000, 2000); } /** |