diff options
Diffstat (limited to 'drivers/net/e1000e')
| -rw-r--r-- | drivers/net/e1000e/hw.h | 2 | ||||
| -rw-r--r-- | drivers/net/e1000e/ich8lan.c | 8 |
2 files changed, 7 insertions, 3 deletions
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index a7d08da..5ed1788 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -302,6 +302,8 @@ enum e1e_registers { #define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16 #define E1000_KMRNCTRLSTA_REN 0x00200000 #define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */ +#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */ +#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */ #define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */ #define E1000_KMRNCTRLSTA_K1_CONFIG 0x7 #define E1000_KMRNCTRLSTA_K1_ENABLE 0x140E diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 7b33be9..9b09246 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -2755,14 +2755,16 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) * and increase the max iterations when polling the phy; * this fixes erroneous timeouts at 10Mbps. */ - ret_val = e1000e_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF); + ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_TIMEOUTS, 0xFFFF); if (ret_val) return ret_val; - ret_val = e1000e_read_kmrn_reg(hw, GG82563_REG(0x34, 9), ®_data); + ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, + ®_data); if (ret_val) return ret_val; reg_data |= 0x3F; - ret_val = e1000e_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data); + ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, + reg_data); if (ret_val) return ret_val; |
