summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e/phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e/phy.c')
-rw-r--r--drivers/net/e1000e/phy.c580
1 files changed, 398 insertions, 182 deletions
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 03175b3..55a2c0a 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2008 Intel Corporation.
+ Copyright(c) 1999 - 2009 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -44,6 +44,8 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
/* Cable length tables */
static const u16 e1000_m88_cable_length_table[] =
{ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+ ARRAY_SIZE(e1000_m88_cable_length_table)
static const u16 e1000_igp_2_cable_length_table[] =
{ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
@@ -71,7 +73,6 @@ static const u16 e1000_igp_2_cable_length_table[] =
#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15)
#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */
#define I82577_CTRL_REG 23
-#define I82577_CTRL_DOWNSHIFT_MASK (7 << 10)
/* 82577 specific PHY registers */
#define I82577_PHY_CTRL_2 18
@@ -131,7 +132,7 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw)
u16 phy_id;
u16 retry_count = 0;
- if (!(phy->ops.read_phy_reg))
+ if (!(phy->ops.read_reg))
goto out;
while (retry_count < 2) {
@@ -152,29 +153,29 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw)
goto out;
/*
- * If the PHY ID is still unknown, we may have an 82577i
- * without link. We will try again after setting Slow
- * MDIC mode. No harm in trying again in this case since
- * the PHY ID is unknown at this point anyway
+ * If the PHY ID is still unknown, we may have an 82577
+ * without link. We will try again after setting Slow MDIC
+ * mode. No harm in trying again in this case since the PHY
+ * ID is unknown at this point anyway.
*/
- ret_val = phy->ops.acquire_phy(hw);
+ ret_val = phy->ops.acquire(hw);
if (ret_val)
goto out;
ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
if (ret_val)
goto out;
- phy->ops.release_phy(hw);
+ phy->ops.release(hw);
retry_count++;
}
out:
/* Revert to MDIO fast mode, if applicable */
if (retry_count) {
- ret_val = phy->ops.acquire_phy(hw);
+ ret_val = phy->ops.acquire(hw);
if (ret_val)
return ret_val;
ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
- phy->ops.release_phy(hw);
+ phy->ops.release(hw);
}
return ret_val;
@@ -212,7 +213,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
u32 i, mdic = 0;
if (offset > MAX_PHY_REG_ADDRESS) {
- hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+ e_dbg("PHY Address %d is out of range\n", offset);
return -E1000_ERR_PARAM;
}
@@ -239,11 +240,11 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
break;
}
if (!(mdic & E1000_MDIC_READY)) {
- hw_dbg(hw, "MDI Read did not complete\n");
+ e_dbg("MDI Read did not complete\n");
return -E1000_ERR_PHY;
}
if (mdic & E1000_MDIC_ERROR) {
- hw_dbg(hw, "MDI Error\n");
+ e_dbg("MDI Error\n");
return -E1000_ERR_PHY;
}
*data = (u16) mdic;
@@ -265,7 +266,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
u32 i, mdic = 0;
if (offset > MAX_PHY_REG_ADDRESS) {
- hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+ e_dbg("PHY Address %d is out of range\n", offset);
return -E1000_ERR_PARAM;
}
@@ -293,11 +294,11 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
break;
}
if (!(mdic & E1000_MDIC_READY)) {
- hw_dbg(hw, "MDI Write did not complete\n");
+ e_dbg("MDI Write did not complete\n");
return -E1000_ERR_PHY;
}
if (mdic & E1000_MDIC_ERROR) {
- hw_dbg(hw, "MDI Error\n");
+ e_dbg("MDI Error\n");
return -E1000_ERR_PHY;
}
@@ -318,14 +319,14 @@ s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
{
s32 ret_val;
- ret_val = hw->phy.ops.acquire_phy(hw);
+ ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return ret_val;
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
- hw->phy.ops.release_phy(hw);
+ hw->phy.ops.release(hw);
return ret_val;
}
@@ -343,14 +344,14 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
{
s32 ret_val;
- ret_val = hw->phy.ops.acquire_phy(hw);
+ ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return ret_val;
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
- hw->phy.ops.release_phy(hw);
+ hw->phy.ops.release(hw);
return ret_val;
}
@@ -372,10 +373,10 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
s32 ret_val = 0;
if (!locked) {
- if (!(hw->phy.ops.acquire_phy))
+ if (!(hw->phy.ops.acquire))
goto out;
- ret_val = hw->phy.ops.acquire_phy(hw);
+ ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
goto out;
}
@@ -393,7 +394,7 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
release:
if (!locked)
- hw->phy.ops.release_phy(hw);
+ hw->phy.ops.release(hw);
out:
return ret_val;
}
@@ -443,10 +444,10 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
s32 ret_val = 0;
if (!locked) {
- if (!(hw->phy.ops.acquire_phy))
+ if (!(hw->phy.ops.acquire))
goto out;
- ret_val = hw->phy.ops.acquire_phy(hw);
+ ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
goto out;
}
@@ -464,7 +465,7 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
release:
if (!locked)
- hw->phy.ops.release_phy(hw);
+ hw->phy.ops.release(hw);
out:
return ret_val;
@@ -516,10 +517,10 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
s32 ret_val = 0;
if (!locked) {
- if (!(hw->phy.ops.acquire_phy))
+ if (!(hw->phy.ops.acquire))
goto out;
- ret_val = hw->phy.ops.acquire_phy(hw);
+ ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
goto out;
}
@@ -534,7 +535,7 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
*data = (u16)kmrnctrlsta;
if (!locked)
- hw->phy.ops.release_phy(hw);
+ hw->phy.ops.release(hw);
out:
return ret_val;
@@ -588,10 +589,10 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
s32 ret_val = 0;
if (!locked) {
- if (!(hw->phy.ops.acquire_phy))
+ if (!(hw->phy.ops.acquire))
goto out;
- ret_val = hw->phy.ops.acquire_phy(hw);
+ ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
goto out;
}
@@ -603,7 +604,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
udelay(2);
if (!locked)
- hw->phy.ops.release_phy(hw);
+ hw->phy.ops.release(hw);
out:
return ret_val;
@@ -650,7 +651,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
u16 phy_data;
/* Enable CRS on TX. This must be set for half-duplex operation. */
- ret_val = phy->ops.read_phy_reg(hw, I82577_CFG_REG, &phy_data);
+ ret_val = phy->ops.read_reg(hw, I82577_CFG_REG, &phy_data);
if (ret_val)
goto out;
@@ -659,16 +660,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
/* Enable downshift */
phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
- ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data);
- if (ret_val)
- goto out;
-
- /* Set number of link attempts before downshift */
- ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data);
- if (ret_val)
- goto out;
- phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK;
- ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data);
+ ret_val = phy->ops.write_reg(hw, I82577_CFG_REG, phy_data);
out:
return ret_val;
@@ -786,12 +778,12 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
/* Commit the changes. */
ret_val = e1000e_commit_phy(hw);
if (ret_val) {
- hw_dbg(hw, "Error committing the PHY changes\n");
+ e_dbg("Error committing the PHY changes\n");
return ret_val;
}
if (phy->type == e1000_phy_82578) {
- ret_val = phy->ops.read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
&phy_data);
if (ret_val)
return ret_val;
@@ -799,7 +791,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
/* 82578 PHY - set the downshift count to 1x. */
phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
- ret_val = phy->ops.write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
phy_data);
if (ret_val)
return ret_val;
@@ -823,7 +815,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
ret_val = e1000_phy_hw_reset(hw);
if (ret_val) {
- hw_dbg(hw, "Error resetting the PHY.\n");
+ e_dbg("Error resetting the PHY.\n");
return ret_val;
}
@@ -834,9 +826,9 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
msleep(100);
/* disable lplu d0 during driver init */
- ret_val = e1000_set_d0_lplu_state(hw, 0);
+ ret_val = e1000_set_d0_lplu_state(hw, false);
if (ret_val) {
- hw_dbg(hw, "Error Disabling LPLU D0\n");
+ e_dbg("Error Disabling LPLU D0\n");
return ret_val;
}
/* Configure mdi-mdix settings */
@@ -972,39 +964,39 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
NWAY_AR_10T_HD_CAPS);
mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
- hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised);
+ e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
/* Do we want to advertise 10 Mb Half Duplex? */
if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
- hw_dbg(hw, "Advertise 10mb Half duplex\n");
+ e_dbg("Advertise 10mb Half duplex\n");
mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
}
/* Do we want to advertise 10 Mb Full Duplex? */
if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
- hw_dbg(hw, "Advertise 10mb Full duplex\n");
+ e_dbg("Advertise 10mb Full duplex\n");
mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
}
/* Do we want to advertise 100 Mb Half Duplex? */
if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
- hw_dbg(hw, "Advertise 100mb Half duplex\n");
+ e_dbg("Advertise 100mb Half duplex\n");
mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
}
/* Do we want to advertise 100 Mb Full Duplex? */
if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
- hw_dbg(hw, "Advertise 100mb Full duplex\n");
+ e_dbg("Advertise 100mb Full duplex\n");
mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
}
/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
- hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n");
+ e_dbg("Advertise 1000mb Half duplex request denied!\n");
/* Do we want to advertise 1000 Mb Full Duplex? */
if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
- hw_dbg(hw, "Advertise 1000mb Full duplex\n");
+ e_dbg("Advertise 1000mb Full duplex\n");
mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
}
@@ -1063,7 +1055,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
break;
default:
- hw_dbg(hw, "Flow control param set incorrectly\n");
+ e_dbg("Flow control param set incorrectly\n");
ret_val = -E1000_ERR_CONFIG;
return ret_val;
}
@@ -1072,7 +1064,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+ e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
@@ -1109,13 +1101,13 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
if (phy->autoneg_advertised == 0)
phy->autoneg_advertised = phy->autoneg_mask;
- hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n");
+ e_dbg("Reconfiguring auto-neg advertisement params\n");
ret_val = e1000_phy_setup_autoneg(hw);
if (ret_val) {
- hw_dbg(hw, "Error Setting up Auto-Negotiation\n");
+ e_dbg("Error Setting up Auto-Negotiation\n");
return ret_val;
}
- hw_dbg(hw, "Restarting Auto-Neg\n");
+ e_dbg("Restarting Auto-Neg\n");
/*
* Restart auto-negotiation by setting the Auto Neg Enable bit and
@@ -1137,7 +1129,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
if (phy->autoneg_wait_to_complete) {
ret_val = e1000_wait_autoneg(hw);
if (ret_val) {
- hw_dbg(hw, "Error while waiting for "
+ e_dbg("Error while waiting for "
"autoneg to complete\n");
return ret_val;
}
@@ -1175,10 +1167,10 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
* PHY will be set to 10H, 10F, 100H or 100F
* depending on user settings.
*/
- hw_dbg(hw, "Forcing Speed and Duplex\n");
+ e_dbg("Forcing Speed and Duplex\n");
ret_val = e1000_phy_force_speed_duplex(hw);
if (ret_val) {
- hw_dbg(hw, "Error Forcing Speed and Duplex\n");
+ e_dbg("Error Forcing Speed and Duplex\n");
return ret_val;
}
}
@@ -1195,11 +1187,11 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
return ret_val;
if (link) {
- hw_dbg(hw, "Valid link established!!!\n");
+ e_dbg("Valid link established!!!\n");
e1000e_config_collision_dist(hw);
ret_val = e1000e_config_fc_after_link_up(hw);
} else {
- hw_dbg(hw, "Unable to establish link!!!\n");
+ e_dbg("Unable to establish link!!!\n");
}
return ret_val;
@@ -1245,12 +1237,12 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- hw_dbg(hw, "IGP PSCR: %X\n", phy_data);
+ e_dbg("IGP PSCR: %X\n", phy_data);
udelay(1);
if (phy->autoneg_wait_to_complete) {
- hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n");
+ e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
ret_val = e1000e_phy_has_link_generic(hw,
PHY_FORCE_LIMIT,
@@ -1260,7 +1252,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
return ret_val;
if (!link)
- hw_dbg(hw, "Link taking longer than expected.\n");
+ e_dbg("Link taking longer than expected.\n");
/* Try once more */
ret_val = e1000e_phy_has_link_generic(hw,
@@ -1304,7 +1296,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data);
+ e_dbg("M88E1000 PSCR: %X\n", phy_data);
ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
if (ret_val)
@@ -1322,7 +1314,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
return ret_val;
if (phy->autoneg_wait_to_complete) {
- hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n");
+ e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
100000, &link);
@@ -1330,17 +1322,22 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
return ret_val;
if (!link) {
- /*
- * We didn't get link.
- * Reset the DSP and cross our fingers.
- */
- ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
- 0x001d);
- if (ret_val)
- return ret_val;
- ret_val = e1000e_phy_reset_dsp(hw);
- if (ret_val)
- return ret_val;
+ if (hw->phy.type != e1000_phy_m88) {
+ e_dbg("Link taking longer than expected.\n");
+ } else {
+ /*
+ * We didn't get link.
+ * Reset the DSP and cross our fingers.
+ */
+ ret_val = e1e_wphy(hw,
+ M88E1000_PHY_PAGE_SELECT,
+ 0x001d);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000e_phy_reset_dsp(hw);
+ if (ret_val)
+ return ret_val;
+ }
}
/* Try once more */
@@ -1350,6 +1347,9 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
return ret_val;
}
+ if (hw->phy.type != e1000_phy_m88)
+ return 0;
+
ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
if (ret_val)
return ret_val;
@@ -1379,6 +1379,73 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
}
/**
+ * e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex
+ * @hw: pointer to the HW structure
+ *
+ * Forces the speed and duplex settings of the PHY.
+ * This is a function pointer entry point only called by
+ * PHY setup routines.
+ **/
+s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
+ ret_val = e1e_rphy(hw, PHY_CONTROL, &data);
+ if (ret_val)
+ goto out;
+
+ e1000e_phy_force_speed_duplex_setup(hw, &data);
+
+ ret_val = e1e_wphy(hw, PHY_CONTROL, data);
+ if (ret_val)
+ goto out;
+
+ /* Disable MDI-X support for 10/100 */
+ ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IFE_PMC_AUTO_MDIX;
+ data &= ~IFE_PMC_FORCE_MDIX;
+
+ ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
+ if (ret_val)
+ goto out;
+
+ e_dbg("IFE PMC: %X\n", data);
+
+ udelay(1);
+
+ if (phy->autoneg_wait_to_complete) {
+ e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
+
+ ret_val = e1000e_phy_has_link_generic(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ e_dbg("Link taking longer than expected.\n");
+
+ /* Try once more */
+ ret_val = e1000e_phy_has_link_generic(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
* e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
* @hw: pointer to the HW structure
* @phy_ctrl: pointer to current value of PHY_CONTROL
@@ -1413,11 +1480,11 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
ctrl &= ~E1000_CTRL_FD;
*phy_ctrl &= ~MII_CR_FULL_DUPLEX;
- hw_dbg(hw, "Half Duplex\n");
+ e_dbg("Half Duplex\n");
} else {
ctrl |= E1000_CTRL_FD;
*phy_ctrl |= MII_CR_FULL_DUPLEX;
- hw_dbg(hw, "Full Duplex\n");
+ e_dbg("Full Duplex\n");
}
/* Forcing 10mb or 100mb? */
@@ -1425,12 +1492,12 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
ctrl |= E1000_CTRL_SPD_100;
*phy_ctrl |= MII_CR_SPEED_100;
*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
- hw_dbg(hw, "Forcing 100mb\n");
+ e_dbg("Forcing 100mb\n");
} else {
ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
*phy_ctrl |= MII_CR_SPEED_10;
*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
- hw_dbg(hw, "Forcing 10mb\n");
+ e_dbg("Forcing 10mb\n");
}
e1000e_config_collision_dist(hw);
@@ -1533,8 +1600,8 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
switch (phy->type) {
case e1000_phy_m88:
case e1000_phy_gg82563:
+ case e1000_phy_bm:
case e1000_phy_82578:
- case e1000_phy_82577:
offset = M88E1000_PHY_SPEC_STATUS;
mask = M88E1000_PSSR_DOWNSHIFT;
break;
@@ -1545,7 +1612,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
break;
default:
/* speed downshift not supported */
- phy->speed_downgraded = 0;
+ phy->speed_downgraded = false;
return 0;
}
@@ -1565,7 +1632,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
*
* Polarity is determined based on the PHY specific status register.
**/
-static s32 e1000_check_polarity_m88(struct e1000_hw *hw)
+s32 e1000_check_polarity_m88(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -1590,7 +1657,7 @@ static s32 e1000_check_polarity_m88(struct e1000_hw *hw)
* Polarity is determined based on the PHY port status register, and the
* current speed (since there is no polarity at 100Mbps).
**/
-static s32 e1000_check_polarity_igp(struct e1000_hw *hw)
+s32 e1000_check_polarity_igp(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -1628,6 +1695,39 @@ static s32 e1000_check_polarity_igp(struct e1000_hw *hw)
}
/**
+ * e1000_check_polarity_ife - Check cable polarity for IFE PHY
+ * @hw: pointer to the HW structure
+ *
+ * Polarity is determined on the polarity reversal feature being enabled.
+ **/
+s32 e1000_check_polarity_ife(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, offset, mask;
+
+ /*
+ * Polarity is determined based on the reversal feature being enabled.
+ */
+ if (phy->polarity_correction) {
+ offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
+ mask = IFE_PESC_POLARITY_REVERSED;
+ } else {
+ offset = IFE_PHY_SPECIAL_CONTROL;
+ mask = IFE_PSC_FORCE_POLARITY;
+ }
+
+ ret_val = e1e_rphy(hw, offset, &phy_data);
+
+ if (!ret_val)
+ phy->cable_polarity = (phy_data & mask)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+ return ret_val;
+}
+
+/**
* e1000_wait_autoneg - Wait for auto-neg completion
* @hw: pointer to the HW structure
*
@@ -1727,15 +1827,21 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
if (ret_val)
- return ret_val;
+ goto out;
index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
phy->min_cable_length = e1000_m88_cable_length_table[index];
- phy->max_cable_length = e1000_m88_cable_length_table[index+1];
+ phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+out:
return ret_val;
}
@@ -1746,7 +1852,7 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
* The automatic gain control (agc) normalizes the amplitude of the
* received signal, adjusting for the attenuation produced by the
* cable. By reading the AGC registers, which represent the
- * combination of course and fine gain value, the value can be put
+ * combination of coarse and fine gain value, the value can be put
* into a lookup table to obtain the approximate cable length
* for each channel.
**/
@@ -1771,7 +1877,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
/*
* Getting bits 15:9, which represent the combination of
- * course and fine gain values. The result is a number
+ * coarse and fine gain values. The result is a number
* that can be put into the lookup table to obtain the
* approximate cable length.
*/
@@ -1825,8 +1931,8 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
u16 phy_data;
bool link;
- if (hw->phy.media_type != e1000_media_type_copper) {
- hw_dbg(hw, "Phy info is only valid for copper media\n");
+ if (phy->media_type != e1000_media_type_copper) {
+ e_dbg("Phy info is only valid for copper media\n");
return -E1000_ERR_CONFIG;
}
@@ -1835,7 +1941,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
return ret_val;
if (!link) {
- hw_dbg(hw, "Phy info is only valid if link is up\n");
+ e_dbg("Phy info is only valid if link is up\n");
return -E1000_ERR_CONFIG;
}
@@ -1903,11 +2009,11 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
return ret_val;
if (!link) {
- hw_dbg(hw, "Phy info is only valid if link is up\n");
+ e_dbg("Phy info is only valid if link is up\n");
return -E1000_ERR_CONFIG;
}
- phy->polarity_correction = 1;
+ phy->polarity_correction = true;
ret_val = e1000_check_polarity_igp(hw);
if (ret_val)
@@ -1946,6 +2052,61 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
}
/**
+ * e1000_get_phy_info_ife - Retrieves various IFE PHY states
+ * @hw: pointer to the HW structure
+ *
+ * Populates "phy" structure with various feature states.
+ **/
+s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ e_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
+ if (ret_val)
+ goto out;
+ phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
+ ? false : true;
+
+ if (phy->polarity_correction) {
+ ret_val = e1000_check_polarity_ife(hw);
+ if (ret_val)
+ goto out;
+ } else {
+ /* Polarity is forced */
+ phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+ }
+
+ ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false;
+
+ /* The following parameters are undefined for 10/100 operation. */
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+
+out:
+ return ret_val;
+}
+
+/**
* e1000e_phy_sw_reset - PHY software reset
* @hw: pointer to the HW structure
*
@@ -1990,7 +2151,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
if (ret_val)
return 0;
- ret_val = phy->ops.acquire_phy(hw);
+ ret_val = phy->ops.acquire(hw);
if (ret_val)
return ret_val;
@@ -2005,7 +2166,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
udelay(150);
- phy->ops.release_phy(hw);
+ phy->ops.release(hw);
return e1000_get_phy_cfg_done(hw);
}
@@ -2031,7 +2192,7 @@ s32 e1000e_get_cfg_done(struct e1000_hw *hw)
**/
s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw)
{
- hw_dbg(hw, "Running IGP 3 PHY init script\n");
+ e_dbg("Running IGP 3 PHY init script\n");
/* PHY init IGP 3 */
/* Enable rise/fall, 10-mode work in class-A */
@@ -2199,28 +2360,34 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
s32 e1000e_determine_phy_address(struct e1000_hw *hw)
{
s32 ret_val = -E1000_ERR_PHY_TYPE;
- u32 phy_addr= 0;
- u32 i = 0;
+ u32 phy_addr = 0;
+ u32 i;
enum e1000_phy_type phy_type = e1000_phy_unknown;
- do {
- for (phy_addr = 0; phy_addr < 4; phy_addr++) {
- hw->phy.addr = phy_addr;
+ hw->phy.id = phy_type;
+
+ for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) {
+ hw->phy.addr = phy_addr;
+ i = 0;
+
+ do {
e1000e_get_phy_id(hw);
phy_type = e1000e_get_phy_type_from_id(hw->phy.id);
- /*
+ /*
* If phy_type is valid, break - we found our
* PHY address
*/
if (phy_type != e1000_phy_unknown) {
ret_val = 0;
- break;
+ goto out;
}
- }
- i++;
- } while ((ret_val != 0) && (i < 100));
+ msleep(1);
+ i++;
+ } while (i < 10);
+ }
+out:
return ret_val;
}
@@ -2256,7 +2423,7 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
u32 page = offset >> IGP_PAGE_SHIFT;
u32 page_shift = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
+ ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return ret_val;
@@ -2294,7 +2461,7 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
data);
out:
- hw->phy.ops.release_phy(hw);
+ hw->phy.ops.release(hw);
return ret_val;
}
@@ -2315,7 +2482,7 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
u32 page = offset >> IGP_PAGE_SHIFT;
u32 page_shift = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
+ ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return ret_val;
@@ -2352,7 +2519,7 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
out:
- hw->phy.ops.release_phy(hw);
+ hw->phy.ops.release(hw);
return ret_val;
}
@@ -2371,7 +2538,7 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
s32 ret_val;
u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
- ret_val = hw->phy.ops.acquire_phy(hw);
+ ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return ret_val;
@@ -2397,7 +2564,7 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
out:
- hw->phy.ops.release_phy(hw);
+ hw->phy.ops.release(hw);
return ret_val;
}
@@ -2415,7 +2582,7 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
s32 ret_val;
u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
- ret_val = hw->phy.ops.acquire_phy(hw);
+ ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return ret_val;
@@ -2441,7 +2608,7 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
data);
out:
- hw->phy.ops.release_phy(hw);
+ hw->phy.ops.release(hw);
return ret_val;
}
@@ -2474,7 +2641,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
/* Gig must be disabled for MDIO accesses to page 800 */
if ((hw->mac.type == e1000_pchlan) &&
(!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
- hw_dbg(hw, "Attempting to access page 800 while gig enabled\n");
+ e_dbg("Attempting to access page 800 while gig enabled.\n");
/* All operations in this function are phy address 1 */
hw->phy.addr = 1;
@@ -2484,20 +2651,26 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
(BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
- if (ret_val)
+ if (ret_val) {
+ e_dbg("Could not read PHY page 769\n");
goto out;
+ }
/* First clear bit 4 to avoid a power state change */
phy_reg &= ~(BM_WUC_HOST_WU_BIT);
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
- if (ret_val)
+ if (ret_val) {
+ e_dbg("Could not clear PHY page 769 bit 4\n");
goto out;
+ }
/* Write bit 2 = 1, and clear bit 4 to 769_17 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG,
phy_reg | BM_WUC_ENABLE_BIT);
- if (ret_val)
+ if (ret_val) {
+ e_dbg("Could not write PHY page 769 bit 2\n");
goto out;
+ }
/* Select page 800 */
ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -2505,21 +2678,25 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
/* Write the page 800 offset value using opcode 0x11 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
- if (ret_val)
+ if (ret_val) {
+ e_dbg("Could not write address opcode to page 800\n");
goto out;
+ }
if (read) {
/* Read the page 800 value using opcode 0x12 */
ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
data);
} else {
- /* Read the page 800 value using opcode 0x12 */
+ /* Write the page 800 value using opcode 0x12 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
*data);
}
- if (ret_val)
+ if (ret_val) {
+ e_dbg("Could not access data value from page 800\n");
goto out;
+ }
/*
* Restore 769_17.2 to its original value
@@ -2530,12 +2707,53 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
/* Clear 769_17.2 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+ if (ret_val) {
+ e_dbg("Could not clear PHY page 769 bit 2\n");
+ goto out;
+ }
out:
return ret_val;
}
/**
+ * e1000_power_up_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_up_phy_copper(struct e1000_hw *hw)
+{
+ u16 mii_reg = 0;
+
+ /* The PHY will retain its settings across a power down/up cycle */
+ e1e_rphy(hw, PHY_CONTROL, &mii_reg);
+ mii_reg &= ~MII_CR_POWER_DOWN;
+ e1e_wphy(hw, PHY_CONTROL, mii_reg);
+}
+
+/**
+ * e1000_power_down_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_down_phy_copper(struct e1000_hw *hw)
+{
+ u16 mii_reg = 0;
+
+ /* The PHY will retain its settings across a power down/up cycle */
+ e1e_rphy(hw, PHY_CONTROL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
+ e1e_wphy(hw, PHY_CONTROL, mii_reg);
+ msleep(1);
+}
+
+/**
* e1000e_commit_phy - Soft PHY reset
* @hw: pointer to the HW structure
*
@@ -2544,8 +2762,8 @@ out:
**/
s32 e1000e_commit_phy(struct e1000_hw *hw)
{
- if (hw->phy.ops.commit_phy)
- return hw->phy.ops.commit_phy(hw);
+ if (hw->phy.ops.commit)
+ return hw->phy.ops.commit(hw);
return 0;
}
@@ -2624,7 +2842,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
bool in_slow_mode = false;
if (!locked) {
- ret_val = hw->phy.ops.acquire_phy(hw);
+ ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return ret_val;
}
@@ -2658,19 +2876,18 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
page = 0;
if (reg > MAX_PHY_MULTI_PAGE_REG) {
- if ((hw->phy.type != e1000_phy_82578) ||
- ((reg != I82578_ADDR_REG) &&
- (reg != I82578_ADDR_REG + 1))) {
- u32 phy_addr = hw->phy.addr;
-
- hw->phy.addr = 1;
-
- /* Page is shifted left, PHY expects (page x 32) */
- ret_val = e1000e_write_phy_reg_mdic(hw,
- IGP01E1000_PHY_PAGE_SELECT,
- (page << IGP_PAGE_SHIFT));
- hw->phy.addr = phy_addr;
- }
+ u32 phy_addr = hw->phy.addr;
+
+ hw->phy.addr = 1;
+
+ /* Page is shifted left, PHY expects (page x 32) */
+ ret_val = e1000e_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (page << IGP_PAGE_SHIFT));
+ hw->phy.addr = phy_addr;
+
+ if (ret_val)
+ goto out;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
@@ -2678,10 +2895,10 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
out:
/* Revert to MDIO fast mode, if applicable */
if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
- ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+ ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
if (!locked)
- hw->phy.ops.release_phy(hw);
+ hw->phy.ops.release(hw);
return ret_val;
}
@@ -2734,7 +2951,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
bool in_slow_mode = false;
if (!locked) {
- ret_val = hw->phy.ops.acquire_phy(hw);
+ ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return ret_val;
}
@@ -2784,19 +3001,18 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
}
if (reg > MAX_PHY_MULTI_PAGE_REG) {
- if ((hw->phy.type != e1000_phy_82578) ||
- ((reg != I82578_ADDR_REG) &&
- (reg != I82578_ADDR_REG + 1))) {
- u32 phy_addr = hw->phy.addr;
-
- hw->phy.addr = 1;
-
- /* Page is shifted left, PHY expects (page x 32) */
- ret_val = e1000e_write_phy_reg_mdic(hw,
- IGP01E1000_PHY_PAGE_SELECT,
- (page << IGP_PAGE_SHIFT));
- hw->phy.addr = phy_addr;
- }
+ u32 phy_addr = hw->phy.addr;
+
+ hw->phy.addr = 1;
+
+ /* Page is shifted left, PHY expects (page x 32) */
+ ret_val = e1000e_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (page << IGP_PAGE_SHIFT));
+ hw->phy.addr = phy_addr;
+
+ if (ret_val)
+ goto out;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
@@ -2805,10 +3021,10 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
out:
/* Revert to MDIO fast mode, if applicable */
if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
- ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+ ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
if (!locked)
- hw->phy.ops.release_phy(hw);
+ hw->phy.ops.release(hw);
return ret_val;
}
@@ -2884,7 +3100,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
/* masking with 0x3F to remove the page from offset */
ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
if (ret_val) {
- hw_dbg(hw, "Could not write PHY the HV address register\n");
+ e_dbg("Could not write PHY the HV address register\n");
goto out;
}
@@ -2895,7 +3111,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
if (ret_val) {
- hw_dbg(hw, "Could not read data value from HV data register\n");
+ e_dbg("Could not read data value from HV data register\n");
goto out;
}
@@ -2923,12 +3139,12 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
goto out;
/* Do not apply workaround if in PHY loopback bit 14 set */
- hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &data);
+ hw->phy.ops.read_reg(hw, PHY_CONTROL, &data);
if (data & PHY_CONTROL_LB)
goto out;
/* check if link is up and at 1Gbps */
- ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data);
+ ret_val = hw->phy.ops.read_reg(hw, BM_CS_STATUS, &data);
if (ret_val)
goto out;
@@ -2944,13 +3160,13 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
mdelay(200);
/* flush the packets in the fifo buffer */
- ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL,
+ ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
HV_MUX_DATA_CTRL_GEN_TO_MAC |
HV_MUX_DATA_CTRL_FORCE_SPEED);
if (ret_val)
goto out;
- ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL,
+ ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
HV_MUX_DATA_CTRL_GEN_TO_MAC);
out:
@@ -2971,7 +3187,7 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw)
s32 ret_val;
u16 data;
- ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data);
+ ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
if (!ret_val)
phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
@@ -2996,13 +3212,13 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
u16 phy_data;
bool link;
- ret_val = phy->ops.read_phy_reg(hw, PHY_CONTROL, &phy_data);
+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
if (ret_val)
goto out;
e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
- ret_val = phy->ops.write_phy_reg(hw, PHY_CONTROL, phy_data);
+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
if (ret_val)
goto out;
@@ -3010,23 +3226,23 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
* Clear Auto-Crossover to force MDI manually. 82577 requires MDI
* forced whenever speed and duplex are forced.
*/
- ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_CTRL_2, &phy_data);
+ ret_val = phy->ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data);
if (ret_val)
goto out;
phy_data &= ~I82577_PHY_CTRL2_AUTO_MDIX;
phy_data &= ~I82577_PHY_CTRL2_FORCE_MDI_MDIX;
- ret_val = phy->ops.write_phy_reg(hw, I82577_PHY_CTRL_2, phy_data);
+ ret_val = phy->ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data);
if (ret_val)
goto out;
- hw_dbg(hw, "I82577_PHY_CTRL_2: %X\n", phy_data);
+ e_dbg("I82577_PHY_CTRL_2: %X\n", phy_data);
udelay(1);
if (phy->autoneg_wait_to_complete) {
- hw_dbg(hw, "Waiting for forced speed/duplex link on 82577 phy\n");
+ e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
ret_val = e1000e_phy_has_link_generic(hw,
PHY_FORCE_LIMIT,
@@ -3036,7 +3252,7 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
goto out;
if (!link)
- hw_dbg(hw, "Link taking longer than expected.\n");
+ e_dbg("Link taking longer than expected.\n");
/* Try once more */
ret_val = e1000e_phy_has_link_generic(hw,
@@ -3072,7 +3288,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
goto out;
if (!link) {
- hw_dbg(hw, "Phy info is only valid if link is up\n");
+ e_dbg("Phy info is only valid if link is up\n");
ret_val = -E1000_ERR_CONFIG;
goto out;
}
@@ -3083,7 +3299,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
if (ret_val)
goto out;
- ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data);
+ ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
if (ret_val)
goto out;
@@ -3095,7 +3311,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
if (ret_val)
goto out;
- ret_val = phy->ops.read_phy_reg(hw, PHY_1000T_STATUS, &data);
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
if (ret_val)
goto out;
@@ -3129,7 +3345,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data, length;
- ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
+ ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
if (ret_val)
goto out;
@@ -3137,7 +3353,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
I82577_DSTATUS_CABLE_LENGTH_SHIFT;
if (length == E1000_CABLE_LENGTH_UNDEFINED)
- ret_val = E1000_ERR_PHY;
+ ret_val = -E1000_ERR_PHY;
phy->cable_length = length;
OpenPOWER on IntegriCloud