diff options
Diffstat (limited to 'drivers/net/e1000/e1000_main.c')
-rw-r--r-- | drivers/net/e1000/e1000_main.c | 245 |
1 files changed, 154 insertions, 91 deletions
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 5cc39ed..a117f2a 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -123,8 +123,10 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring); static void e1000_set_rx_mode(struct net_device *netdev); static void e1000_update_phy_info(unsigned long data); +static void e1000_update_phy_info_task(struct work_struct *work); static void e1000_watchdog(unsigned long data); static void e1000_82547_tx_fifo_stall(unsigned long data); +static void e1000_82547_tx_fifo_stall_task(struct work_struct *work); static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev); static struct net_device_stats * e1000_get_stats(struct net_device *netdev); @@ -519,8 +521,21 @@ void e1000_down(struct e1000_adapter *adapter) e1000_clean_all_rx_rings(adapter); } +void e1000_reinit_safe(struct e1000_adapter *adapter) +{ + while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) + msleep(1); + rtnl_lock(); + e1000_down(adapter); + e1000_up(adapter); + rtnl_unlock(); + clear_bit(__E1000_RESETTING, &adapter->flags); +} + void e1000_reinit_locked(struct e1000_adapter *adapter) { + /* if rtnl_lock is not held the call path is bogus */ + ASSERT_RTNL(); WARN_ON(in_interrupt()); while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) msleep(1); @@ -790,6 +805,70 @@ static const struct net_device_ops e1000_netdev_ops = { }; /** + * e1000_init_hw_struct - initialize members of hw struct + * @adapter: board private struct + * @hw: structure used by e1000_hw.c + * + * Factors out initialization of the e1000_hw struct to its own function + * that can be called very early at init (just after struct allocation). + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + * Returns negative error codes if MAC type setup fails. + */ +static int e1000_init_hw_struct(struct e1000_adapter *adapter, + struct e1000_hw *hw) +{ + struct pci_dev *pdev = adapter->pdev; + + /* PCI config space info */ + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_id = pdev->subsystem_device; + hw->revision_id = pdev->revision; + + pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word); + + hw->max_frame_size = adapter->netdev->mtu + + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; + hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE; + + /* identify the MAC */ + if (e1000_set_mac_type(hw)) { + e_err(probe, "Unknown MAC Type\n"); + return -EIO; + } + + switch (hw->mac_type) { + default: + break; + case e1000_82541: + case e1000_82547: + case e1000_82541_rev_2: + case e1000_82547_rev_2: + hw->phy_init_script = 1; + break; + } + + e1000_set_media_type(hw); + e1000_get_bus_info(hw); + + hw->wait_autoneg_complete = false; + hw->tbi_compatibility_en = true; + hw->adaptive_ifs = true; + + /* Copper options */ + + if (hw->media_type == e1000_media_type_copper) { + hw->mdix = AUTO_ALL_MODES; + hw->disable_polarity_correction = false; + hw->master_slave = E1000_MASTER_SLAVE; + } + + return 0; +} + +/** * e1000_probe - Device Initialization Routine * @pdev: PCI device information struct * @ent: entry in e1000_pci_tbl @@ -826,22 +905,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (err) return err; - if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && - !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { - pci_using_dac = 1; - } else { - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); - if (err) { - err = dma_set_coherent_mask(&pdev->dev, - DMA_BIT_MASK(32)); - if (err) { - pr_err("No usable DMA config, aborting\n"); - goto err_dma; - } - } - pci_using_dac = 0; - } - err = pci_request_selected_regions(pdev, bars, e1000_driver_name); if (err) goto err_pci_reg; @@ -885,6 +948,32 @@ static int __devinit e1000_probe(struct pci_dev *pdev, } } + /* make ready for any if (hw->...) below */ + err = e1000_init_hw_struct(adapter, hw); + if (err) + goto err_sw_init; + + /* + * there is a workaround being applied below that limits + * 64-bit DMA addresses to 64-bit hardware. There are some + * 32-bit adapters that Tx hang when given 64-bit DMA addresses + */ + pci_using_dac = 0; + if ((hw->bus_type == e1000_bus_type_pcix) && + !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { + /* + * according to DMA-API-HOWTO, coherent calls will always + * succeed if the set call did + */ + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + pci_using_dac = 1; + } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) { + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + } else { + pr_err("No usable DMA config, aborting\n"); + goto err_dma; + } + netdev->netdev_ops = &e1000_netdev_ops; e1000_set_ethtool_ops(netdev); netdev->watchdog_timeo = 5 * HZ; @@ -914,8 +1003,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev, (hw->mac_type != e1000_82547)) netdev->features |= NETIF_F_TSO; - if (pci_using_dac) + if (pci_using_dac) { netdev->features |= NETIF_F_HIGHDMA; + netdev->vlan_features |= NETIF_F_HIGHDMA; + } netdev->vlan_features |= NETIF_F_TSO; netdev->vlan_features |= NETIF_F_HW_CSUM; @@ -959,21 +1050,21 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (!is_valid_ether_addr(netdev->perm_addr)) e_err(probe, "Invalid MAC Address\n"); - e1000_get_bus_info(hw); - init_timer(&adapter->tx_fifo_stall_timer); - adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall; + adapter->tx_fifo_stall_timer.function = e1000_82547_tx_fifo_stall; adapter->tx_fifo_stall_timer.data = (unsigned long)adapter; init_timer(&adapter->watchdog_timer); - adapter->watchdog_timer.function = &e1000_watchdog; + adapter->watchdog_timer.function = e1000_watchdog; adapter->watchdog_timer.data = (unsigned long) adapter; init_timer(&adapter->phy_info_timer); - adapter->phy_info_timer.function = &e1000_update_phy_info; + adapter->phy_info_timer.function = e1000_update_phy_info; adapter->phy_info_timer.data = (unsigned long)adapter; + INIT_WORK(&adapter->fifo_stall_task, e1000_82547_tx_fifo_stall_task); INIT_WORK(&adapter->reset_task, e1000_reset_task); + INIT_WORK(&adapter->phy_info_task, e1000_update_phy_info_task); e1000_check_options(adapter); @@ -1072,6 +1163,7 @@ err_eeprom: iounmap(hw->flash_address); kfree(adapter->tx_ring); kfree(adapter->rx_ring); +err_dma: err_sw_init: iounmap(hw->hw_addr); err_ioremap: @@ -1079,7 +1171,6 @@ err_ioremap: err_alloc_etherdev: pci_release_selected_regions(pdev, bars); err_pci_reg: -err_dma: pci_disable_device(pdev); return err; } @@ -1131,62 +1222,12 @@ static void __devexit e1000_remove(struct pci_dev *pdev) * @adapter: board private structure to initialize * * e1000_sw_init initializes the Adapter private data structure. - * Fields are initialized based on PCI device information and - * OS network device settings (MTU size). + * e1000_init_hw_struct MUST be called before this function **/ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) { - struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - - /* PCI config space info */ - - hw->vendor_id = pdev->vendor; - hw->device_id = pdev->device; - hw->subsystem_vendor_id = pdev->subsystem_vendor; - hw->subsystem_id = pdev->subsystem_device; - hw->revision_id = pdev->revision; - - pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word); - adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE; - hw->max_frame_size = netdev->mtu + - ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; - hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE; - - /* identify the MAC */ - - if (e1000_set_mac_type(hw)) { - e_err(probe, "Unknown MAC Type\n"); - return -EIO; - } - - switch (hw->mac_type) { - default: - break; - case e1000_82541: - case e1000_82547: - case e1000_82541_rev_2: - case e1000_82547_rev_2: - hw->phy_init_script = 1; - break; - } - - e1000_set_media_type(hw); - - hw->wait_autoneg_complete = false; - hw->tbi_compatibility_en = true; - hw->adaptive_ifs = true; - - /* Copper options */ - - if (hw->media_type == e1000_media_type_copper) { - hw->mdix = AUTO_ALL_MODES; - hw->disable_polarity_correction = false; - hw->master_slave = E1000_MASTER_SLAVE; - } adapter->num_tx_queues = 1; adapter->num_rx_queues = 1; @@ -2210,22 +2251,45 @@ static void e1000_set_rx_mode(struct net_device *netdev) static void e1000_update_phy_info(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *)data; + schedule_work(&adapter->phy_info_task); +} + +static void e1000_update_phy_info_task(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, + phy_info_task); struct e1000_hw *hw = &adapter->hw; + + rtnl_lock(); e1000_phy_get_info(hw, &adapter->phy_info); + rtnl_unlock(); } /** * e1000_82547_tx_fifo_stall - Timer Call-back * @data: pointer to adapter cast into an unsigned long **/ - static void e1000_82547_tx_fifo_stall(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *)data; + schedule_work(&adapter->fifo_stall_task); +} + +/** + * e1000_82547_tx_fifo_stall_task - task to complete work + * @work: work struct contained inside adapter struct + **/ +static void e1000_82547_tx_fifo_stall_task(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, + fifo_stall_task); struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; u32 tctl; + rtnl_lock(); if (atomic_read(&adapter->tx_fifo_stall)) { if ((er32(TDT) == er32(TDH)) && (er32(TDFT) == er32(TDFH)) && @@ -2246,6 +2310,7 @@ static void e1000_82547_tx_fifo_stall(unsigned long data) mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1); } } + rtnl_unlock(); } bool e1000_has_link(struct e1000_adapter *adapter) @@ -3054,7 +3119,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, } } - if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) { + if (unlikely(vlan_tx_tag_present(skb))) { tx_flags |= E1000_TX_FLAGS_VLAN; tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT); } @@ -3113,7 +3178,7 @@ static void e1000_reset_task(struct work_struct *work) struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, reset_task); - e1000_reinit_locked(adapter); + e1000_reinit_safe(adapter); } /** @@ -3535,7 +3600,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, adapter->total_tx_packets += total_tx_packets; netdev->stats.tx_bytes += total_tx_bytes; netdev->stats.tx_packets += total_tx_packets; - return (count < tx_ring->count); + return count < tx_ring->count; } /** @@ -3552,7 +3617,8 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, struct e1000_hw *hw = &adapter->hw; u16 status = (u16)status_err; u8 errors = (u8)(status_err >> 24); - skb->ip_summed = CHECKSUM_NONE; + + skb_checksum_none_assert(skb); /* 82543 or newer only */ if (unlikely(hw->mac_type < e1000_82543)) return; @@ -3598,13 +3664,14 @@ static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb, static void e1000_receive_skb(struct e1000_adapter *adapter, u8 status, __le16 vlan, struct sk_buff *skb) { - if (unlikely(adapter->vlgrp && (status & E1000_RXD_STAT_VP))) { - vlan_hwaccel_receive_skb(skb, adapter->vlgrp, - le16_to_cpu(vlan) & - E1000_RXD_SPC_VLAN_MASK); - } else { - netif_receive_skb(skb); - } + skb->protocol = eth_type_trans(skb, adapter->netdev); + + if ((unlikely(adapter->vlgrp && (status & E1000_RXD_STAT_VP)))) + vlan_gro_receive(&adapter->napi, adapter->vlgrp, + le16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK, + skb); + else + napi_gro_receive(&adapter->napi, skb); } /** @@ -3762,8 +3829,6 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, goto next_desc; } - skb->protocol = eth_type_trans(skb, netdev); - e1000_receive_skb(adapter, status, rx_desc->special, skb); next_desc: @@ -3926,8 +3991,6 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, ((u32)(rx_desc->errors) << 24), le16_to_cpu(rx_desc->csum), skb); - skb->protocol = eth_type_trans(skb, netdev); - e1000_receive_skb(adapter, status, rx_desc->special, skb); next_desc: @@ -4478,7 +4541,7 @@ static void e1000_restore_vlan(struct e1000_adapter *adapter) if (adapter->vlgrp) { u16 vid; - for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { + for (vid = 0; vid < VLAN_N_VID; vid++) { if (!vlan_group_get_device(adapter->vlgrp, vid)) continue; e1000_vlan_rx_add_vid(adapter->netdev, vid); |