diff options
Diffstat (limited to 'drivers/net/dm9000.c')
| -rw-r--r-- | drivers/net/dm9000.c | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 2d4c4fc..461dd6f 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -802,10 +802,7 @@ dm9000_init_dm9000(struct net_device *dev) /* Checksum mode */ dm9000_set_rx_csum_unlocked(dev, db->rx_csum); - /* GPIO0 on pre-activate PHY */ - iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ - iow(db, DM9000_GPR, 0); /* Enable PHY */ ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0; @@ -852,8 +849,8 @@ static void dm9000_timeout(struct net_device *dev) unsigned long flags; /* Save previous register address */ - reg_save = readb(db->io_addr); spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); netif_stop_queue(dev); dm9000_reset(db); @@ -1194,6 +1191,10 @@ dm9000_open(struct net_device *dev) if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev)) return -EAGAIN; + /* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */ + iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ + mdelay(1); /* delay needs by DM9000B */ + /* Initialize DM9000 board */ dm9000_reset(db); dm9000_init_dm9000(dev); |
