diff options
Diffstat (limited to 'drivers/net/chelsio/vsc8244_reg.h')
| -rw-r--r-- | drivers/net/chelsio/vsc8244_reg.h | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/drivers/net/chelsio/vsc8244_reg.h b/drivers/net/chelsio/vsc8244_reg.h new file mode 100644 index 0000000..d3c1829 --- /dev/null +++ b/drivers/net/chelsio/vsc8244_reg.h @@ -0,0 +1,172 @@ +/* $Date: 2005/11/23 16:28:53 $ $RCSfile: vsc8244_reg.h,v $ $Revision: 1.1 $ */ +#ifndef CHELSIO_MV8E1XXX_H +#define CHELSIO_MV8E1XXX_H + +#ifndef BMCR_SPEED1000 +# define BMCR_SPEED1000 0x40 +#endif + +#ifndef ADVERTISE_PAUSE +# define ADVERTISE_PAUSE 0x400 +#endif +#ifndef ADVERTISE_PAUSE_ASYM +# define ADVERTISE_PAUSE_ASYM 0x800 +#endif + +/* Gigabit MII registers */ +#define MII_GBMR 1 /* 1000Base-T mode register */ +#define MII_GBCR 9 /* 1000Base-T control register */ +#define MII_GBSR 10 /* 1000Base-T status register */ + +/* 1000Base-T control register fields */ +#define GBCR_ADV_1000HALF 0x100 +#define GBCR_ADV_1000FULL 0x200 +#define GBCR_PREFER_MASTER 0x400 +#define GBCR_MANUAL_AS_MASTER 0x800 +#define GBCR_MANUAL_CONFIG_ENABLE 0x1000 + +/* 1000Base-T status register fields */ +#define GBSR_LP_1000HALF 0x400 +#define GBSR_LP_1000FULL 0x800 +#define GBSR_REMOTE_OK 0x1000 +#define GBSR_LOCAL_OK 0x2000 +#define GBSR_LOCAL_MASTER 0x4000 +#define GBSR_MASTER_FAULT 0x8000 + +/* Vitesse PHY interrupt status bits. */ +#if 0 +#define VSC8244_INTR_JABBER 0x0001 +#define VSC8244_INTR_POLARITY_CHNG 0x0002 +#define VSC8244_INTR_ENG_DETECT_CHNG 0x0010 +#define VSC8244_INTR_DOWNSHIFT 0x0020 +#define VSC8244_INTR_MDI_XOVER_CHNG 0x0040 +#define VSC8244_INTR_FIFO_OVER_UNDER 0x0080 +#define VSC8244_INTR_FALSE_CARRIER 0x0100 +#define VSC8244_INTR_SYMBOL_ERROR 0x0200 +#define VSC8244_INTR_LINK_CHNG 0x0400 +#define VSC8244_INTR_AUTONEG_DONE 0x0800 +#define VSC8244_INTR_PAGE_RECV 0x1000 +#define VSC8244_INTR_DUPLEX_CHNG 0x2000 +#define VSC8244_INTR_SPEED_CHNG 0x4000 +#define VSC8244_INTR_AUTONEG_ERR 0x8000 +#else +//#define VSC8244_INTR_JABBER 0x0001 +//#define VSC8244_INTR_POLARITY_CHNG 0x0002 +//#define VSC8244_INTR_BIT2 0x0004 +//#define VSC8244_INTR_BIT3 0x0008 +#define VSC8244_INTR_RX_ERR 0x0001 +#define VSC8244_INTR_MASTER_SLAVE 0x0002 +#define VSC8244_INTR_CABLE_IMPAIRED 0x0004 +#define VSC8244_INTR_FALSE_CARRIER 0x0008 +//#define VSC8244_INTR_ENG_DETECT_CHNG 0x0010 +//#define VSC8244_INTR_DOWNSHIFT 0x0020 +//#define VSC8244_INTR_MDI_XOVER_CHNG 0x0040 +//#define VSC8244_INTR_FIFO_OVER_UNDER 0x0080 +#define VSC8244_INTR_BIT4 0x0010 +#define VSC8244_INTR_FIFO_RX 0x0020 +#define VSC8244_INTR_FIFO_OVER_UNDER 0x0040 +#define VSC8244_INTR_LOCK_LOST 0x0080 +//#define VSC8244_INTR_FALSE_CARRIER 0x0100 +//#define VSC8244_INTR_SYMBOL_ERROR 0x0200 +//#define VSC8244_INTR_LINK_CHNG 0x0400 +//#define VSC8244_INTR_AUTONEG_DONE 0x0800 +#define VSC8244_INTR_SYMBOL_ERROR 0x0100 +#define VSC8244_INTR_ENG_DETECT_CHNG 0x0200 +#define VSC8244_INTR_AUTONEG_DONE 0x0400 +#define VSC8244_INTR_AUTONEG_ERR 0x0800 +//#define VSC8244_INTR_PAGE_RECV 0x1000 +//#define VSC8244_INTR_DUPLEX_CHNG 0x2000 +//#define VSC8244_INTR_SPEED_CHNG 0x4000 +//#define VSC8244_INTR_AUTONEG_ERR 0x8000 +#define VSC8244_INTR_DUPLEX_CHNG 0x1000 +#define VSC8244_INTR_LINK_CHNG 0x2000 +#define VSC8244_INTR_SPEED_CHNG 0x4000 +#define VSC8244_INTR_STATUS 0x8000 +#endif + + +/* Vitesse PHY specific registers. */ +#define VSC8244_SPECIFIC_CNTRL_REGISTER 16 +#define VSC8244_SPECIFIC_STATUS_REGISTER 0x1c +#define VSC8244_INTERRUPT_ENABLE_REGISTER 0x19 +#define VSC8244_INTERRUPT_STATUS_REGISTER 0x1a +#define VSC8244_EXT_PHY_SPECIFIC_CNTRL_REGISTER 20 +#define VSC8244_RECV_ERR_CNTR_REGISTER 21 +#define VSC8244_RES_REGISTER 22 +#define VSC8244_GLOBAL_STATUS_REGISTER 23 +#define VSC8244_LED_CONTROL_REGISTER 24 +#define VSC8244_MANUAL_LED_OVERRIDE_REGISTER 25 +#define VSC8244_EXT_PHY_SPECIFIC_CNTRL_2_REGISTER 26 +#define VSC8244_EXT_PHY_SPECIFIC_STATUS_REGISTER 27 +#define VSC8244_VIRTUAL_CABLE_TESTER_REGISTER 28 +#define VSC8244_EXTENDED_ADDR_REGISTER 29 +#define VSC8244_EXTENDED_REGISTER 30 + +/* PHY specific control register fields */ +#define S_PSCR_MDI_XOVER_MODE 5 +#define M_PSCR_MDI_XOVER_MODE 0x3 +#define V_PSCR_MDI_XOVER_MODE(x) ((x) << S_PSCR_MDI_XOVER_MODE) +#define G_PSCR_MDI_XOVER_MODE(x) (((x) >> S_PSCR_MDI_XOVER_MODE) & M_PSCR_MDI_XOVER_MODE) + +/* Extended PHY specific control register fields */ +#define S_DOWNSHIFT_ENABLE 8 +#define V_DOWNSHIFT_ENABLE (1 << S_DOWNSHIFT_ENABLE) + +#define S_DOWNSHIFT_CNT 9 +#define M_DOWNSHIFT_CNT 0x7 +#define V_DOWNSHIFT_CNT(x) ((x) << S_DOWNSHIFT_CNT) +#define G_DOWNSHIFT_CNT(x) (((x) >> S_DOWNSHIFT_CNT) & M_DOWNSHIFT_CNT) + +/* PHY specific status register fields */ +#define S_PSSR_JABBER 0 +#define V_PSSR_JABBER (1 << S_PSSR_JABBER) + +#define S_PSSR_POLARITY 1 +#define V_PSSR_POLARITY (1 << S_PSSR_POLARITY) + +#define S_PSSR_RX_PAUSE 2 +#define V_PSSR_RX_PAUSE (1 << S_PSSR_RX_PAUSE) + +#define S_PSSR_TX_PAUSE 3 +#define V_PSSR_TX_PAUSE (1 << S_PSSR_TX_PAUSE) + +#define S_PSSR_ENERGY_DETECT 4 +#define V_PSSR_ENERGY_DETECT (1 << S_PSSR_ENERGY_DETECT) + +#define S_PSSR_DOWNSHIFT_STATUS 5 +#define V_PSSR_DOWNSHIFT_STATUS (1 << S_PSSR_DOWNSHIFT_STATUS) + +#define S_PSSR_MDI 6 +#define V_PSSR_MDI (1 << S_PSSR_MDI) + +#define S_PSSR_CABLE_LEN 7 +#define M_PSSR_CABLE_LEN 0x7 +#define V_PSSR_CABLE_LEN(x) ((x) << S_PSSR_CABLE_LEN) +#define G_PSSR_CABLE_LEN(x) (((x) >> S_PSSR_CABLE_LEN) & M_PSSR_CABLE_LEN) + +//#define S_PSSR_LINK 10 +//#define S_PSSR_LINK 13 +#define S_PSSR_LINK 2 +#define V_PSSR_LINK (1 << S_PSSR_LINK) + +//#define S_PSSR_STATUS_RESOLVED 11 +//#define S_PSSR_STATUS_RESOLVED 10 +#define S_PSSR_STATUS_RESOLVED 15 +#define V_PSSR_STATUS_RESOLVED (1 << S_PSSR_STATUS_RESOLVED) + +#define S_PSSR_PAGE_RECEIVED 12 +#define V_PSSR_PAGE_RECEIVED (1 << S_PSSR_PAGE_RECEIVED) + +//#define S_PSSR_DUPLEX 13 +//#define S_PSSR_DUPLEX 12 +#define S_PSSR_DUPLEX 5 +#define V_PSSR_DUPLEX (1 << S_PSSR_DUPLEX) + +//#define S_PSSR_SPEED 14 +//#define S_PSSR_SPEED 14 +#define S_PSSR_SPEED 3 +#define M_PSSR_SPEED 0x3 +#define V_PSSR_SPEED(x) ((x) << S_PSSR_SPEED) +#define G_PSSR_SPEED(x) (((x) >> S_PSSR_SPEED) & M_PSSR_SPEED) + +#endif |
